The relationship between transformational leadership and innovative behaviour in a healthcare context:a team learning versus a cohesion perspective

The purpose of this study was to explore whether the relationship between transformational leadership and innovative behaviour is explained via the mediating role of team learning, or whether instead team cohesion mediates this relationship. Using survey data from 158 professionals within 21 teams in the Dutch healthcare context, we tested by means of hierarchical regression analyses: (a) the relationship between transformational leadership and innovative behaviour; (b) whether team learning or cohesion mediates this relationship; and (c) the relationship between team learning and cohesion, in relation to transformational leadership. Results showed that transformational leadership is positively related to innovative behaviour and that both cohesion and team learning mediate this relationship, with team learning being the strongest mediator. Addressing a neglected area, our study provides evidence to show that managers who enhance team learning are likely to maximise employees' scope for engaging in innovative behaviours. © 2012 Inderscience Enterprises Ltd.

The mechanical and wear behaviour of B(SiC) fibre-reinforced composite materials

The mechanical properties and wear behaviour of B(SiC) fibre-reinforced metal matrix composites (MMCs) and aluminium alloy (2014) produced by metal infiltration technique were determined. Tensile tests were peliormed at different conditions on both the alloy matrix and its composite, and the tensile fracture surfaces were also examined by Scanning Electron Microscopy (SEM). Dry wear of the composite materials sliding on hardened steel was studied using a pin-on-disc type machine. The effect of fibre orientation on wear rate was studied to provide wear resistance engineering data on the MMCs. Tests were carried out with the wear surface sliding direction set normal, parallel and anti-parallel to the fibre axis. Experiments were perfonned for sliding speeds of 0.6, 1.0 and 1.6 m/s for a load range from 12 N to 60 N. A number of sensitive techniques were used to examine worn surface and debris, i.e: Scanning Electron Microscopy (SEM), Backscattered Electron Microscopy (BSEM) and X-ray Photoelectron Spectroscopy (XPS). Finally, the effect of fibre orientation on the wear rate of the Borsic-reinforced plastic matrix composites (PMCs) produced by hot pressing technique was also investigated under identical test conditions. It was found that the composite had a markedly increased tensile strength compared with the matrix. The wear results also showed that the composite exhibited extremely low wear rates compared to the matrix material and the wear rate increased with increasing sliding speed and normal load. The effect of fibre orientation was marked, the lowest wear rates were obtained by arranging the fibre perpendicular to the sliding surface, while the highest wear was obtained for the parallel orientation. The coefficient of friction was found to be lowest in the parallel orientation than the others. Wear of PMCs were influenced to the greatest extent by these test parameters although similar findings were obtained for both composites. Based on the results of analyses using SEM, BSED and XPS, possible wear mechanisms are suggested to explain the wear of these materials.

Fatigue behaviour of C-Mn-B steels:effects of heat treatment prestrain and residual stress

The fatigue-crack propagation and threshold behaviour of a C-Mn steel containing boron has been investigated at a range of strength levels suitable for mining chain applications. The heat-treatment variables examined include two austenitizing temperatures (900 degree C and 1250 degree C) and a range of tempering treatments from the as-quenched condition to tempering at 400 degree C. In mining applications the haulage chains undergo a 'calibration' process which has the effect of imposing a tensile prestrain on the chain links before they go into service. Prestrain is shown to reduce threshold values in these steels and this behaviour is related to its effects on the residual stress distribution in the test specimens.

CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors. Part B: Heat, momentum and mass transport in bubbling fluidised beds

The fluid–particle interaction inside a 150 g/h fluidised bed reactor is modelled. The biomass particle is injected into the fluidised bed and the heat, momentum and mass transport from the fluidising gas and fluidised sand is modelled. The Eulerian approach is used to model the bubbling behaviour of the sand, which is treated as a continuum. Heat transfer from the bubbling bed to the discrete biomass particle, as well as biomass reaction kinetics are modelled according to the literature. The particle motion inside the reactor is computed using drag laws, dependent on the local volume fraction of each phase. FLUENT 6.2 has been used as the modelling framework of the simulations with the whole pyrolysis model incorporated in the form of user-defined function (UDF). The study completes the fast pyrolysis modelling in bubbling fluidised bed reactors.

A longitudinal study of Chinese managerial behaviour:an inside view of decision-making under the economic reform

This research compared decision making processes in six Chinese state-owned enterprises during the period 1985 to 1988. The research objectives were: a) To examine changes in the managerial behaviour over a period of 1985 to 1988 with a focus on decision-making; b) Through this examination, to throw light on the means by which government policies on economic reform were implemented at the enterprise level; c) To illustrate problems encountered in the decentralization programme which was a major part of China's economic reform. The research was conducted by means of intensive interviews with more than eighty managers and a survey of documents relating to specific decisions. A total of sixty cases of decision-making were selected from five decision topics: purchasing of inputs, pricing of outputs, recruitment of labour, organizational change and innovation, which occurred in 1985 (or before) and in 1988/89. Data from the interviews were used to investigate environmental conditions, relations between the enterprise and its higher authority, interactions between management and the party system, the role of information, and effectiveness of regulations and government policies on enterprise management. The analysis of the data indicates that the decision processes in the different enterprises have some similarities in regard to actor involvement, the flow of decision activities, interactions with the authorities, information usage and the effect of regulations. Comparison of the same or similar decision contents over time indicates that the achievement of decentralization varied according to the topic of decision. Managerial authority was delegated to enterprises when the authorities relaxed their control over resource allocation. When acquisition of necessary resources is dependent upon the planning system or the decision matter is sensitive, because it involves change to the institutional framework (e.g. the Party), then a high degree of centralization was retained, resulting in a marginal change in managerial behaviour. The economic reform failed to increase decision efficiency and effectiveness of decision-making. The prevailing institutional frameworks were regarded as negative to the change. The research argues that the decision process is likely to be more contingent on the decision content than the organization. Three types of decision process have been conceptualized, each of them related to a certain type of decision content. This argument gives attention to the perspectives of institution and power in a way which facilitates an elaboration of organizational analysis. The problems encountered in the reform of China's industrial enterprises are identified and discussed. General recommendations for policies of further reform are offered, based on the analysis of decision process and managerial behaviour.

The behaviour of antioxidants in polyolefins under conditions of U.V. exposure

The effects of antioxidants and stabilizers on the oxidative degradation of polyolefins (low density polyethylene [LDPE] and polypropylene [PPJ have been studied after subjecting to prior high temperature processing treatments. The changes in the both chemical and physical properties of unstabilized polymers occurring during processing were found to be strongly dependent on the amount of oxygen present in the mixer. Subsequent thermal and photo-oxidation showed very similar characteristics and the chromophore primarily responsible for:both thermo and photooxidative degradation of unstabilized polymers was found to be hydroperoxide formed during processing. Removal of hydroperoxide by heat treatment in an inert atmosphere although increasing ketonic carbonyl concentration, markedly decreased the rate of photo-oxidation, introducing an induction period similar to that of an unprocessed sample. It was concluded that hydroperoxides are the most important initiators in normally processed polymers during the early stages of photo-oxidation. Antioxidants such as metal dithiocarbamates which act by destroying peroxides into non-radica1 products were found to be efficient melt stabilizers for polyolefins and effective UV stabilizers during the initial photo-oxidation stage, whilst a phenolic antioxidant, n-octadecyl-3-(3',5'-di-terbutyl 4'hydroxypheny1) propionate (Irganox 1076) retarded photo-oxidation rate in the later stages. A typical 'UV absorber' 2-hydroxy-4-octyloxy-benzophenone (HOBP) has a minor thermal antioxidant action but retarded photo-oxidation at all stages. A substituated piperidine derivative, Bis [2.2.6.6-tetramethylpiperidlnyl-4] sebacate (Tinuvin 770) behaved as an pro-oxidant during thermal oxidation of polyolefins but was an effective stabilizer against UV light. The UV absorber, HOBP synergised effectively with both peroxide decomposing antioxidants (metal dithiocarbamates) and a chain-breaking antioxidant (Irganox 1076) during photo-oxidation of the poymers studed whereas the combined effect was additive during thermal oxidation. By contrast, the peroxide decornposers and chain-breaking antioxidant (Irganox 1076) which were effective synergists during thermal oxidation of LDPE· were antagonistic during photo-oxidation. The mechanisms of these processes are discussed.

Enhancing delivery of health behaviour change interventions in primary care: a meta-synthesis of views and experiences of primary care nurses

Objective To systematically find and synthesise qualitative studies that elicited views and experiences of nurses involved in the delivery of health behaviour change (HBC) interventions in primary care, with a focus on how this can inform enhanced delivery and adherence to a structured approach for HBC interventions. Methods Systematic search of five electronic databases and additional strategies to maximise identification of studies, appraisal of studies and use of meta-synthesis to develop an inductive and interpretative form of knowledge synthesis. Results Nine studies met the inclusion criteria. Synthesis resulted in the development of four inter-linking themes; (a) actively engaging nurses in the process of delivering HBC interventions, (b) clarifying roles and responsibilities of those involved, (c) engaging practice colleagues, (d) communication of aims and potential outcomes of the intervention. Conclusion The synthesis of qualitative evidence resulted in the development of a conceptual framework that remained true to the findings of primary studies. This framework describes factors that should be actively promoted to enhance delivery of and adherence to HBC interventions by nurses working in primary care. Practice implications The findings can be used to inform strategies for researchers, policymakers and healthcare providers to enhance fidelity and support delivery of HBC interventions.

Higher-order factor structures and intercorrelations of the 16PF5 and FIRO-B

This study investigated the intercorrelations and the independent and combined factor structures of the Sixteen Personality Factor Questionnaire Fifth Edition (16PF5) and the Fundamental Interpersonal Orientation-Behaviour Scale (FIRO-B). Four thousand four hundred and fourteen U.S. participants completed these measures as part of executive assessments between 1994 and 2003. Exploratory factor analyses supported the five-factor higher-order structure of the 16PF5; however, the three-component structure for the FIRO-B was not supported. A six-factor structure was found to underlie the variance in the measures in combination. Five of these were close to the 16PF5 higher-order structure, but a sixth factor labelled Social Independence also emerged. This new factor consisted of the 16PF5 primaries of Liveliness and Social Boldness, and the FIRO-B Wanted Control scale.

Parametric study of the behaviour of reinforced concrete columns in fire

The research is concerned with the application of the computer simulation technique to study the performance of reinforced concrete columns in a fire environment. The effect of three different concrete constitutive models incorporated in the computer simulation on the structural response of reinforced concrete columns exposed to fire is investigated. The material models differed mainly in respect to the formulation of the mechanical properties of concrete. The results from the simulation have clearly illustrated that a more realistic response of a reinforced concrete column exposed to fire is given by a constitutive model with transient creep or appropriate strain effect The assessment of the relative effect of the three concrete material models is considered from the analysis by adopting the approach of a parametric study, carried out using the results from a series of analyses on columns heated on three sides which produce substantial thermal gradients. Three different loading conditions were used on the column; axial loading and eccentric loading both to induce moments in the same sense and opposite sense to those induced by the thermal gradient. An axially loaded column heated on four sides was also considered. The computer modelling technique adopted separated the thermal and structural responses into two distinct computer programs. A finite element heat transfer analysis was used to determine the thermal response of the reinforced concrete columns when exposed to the ISO 834 furnace environment. The temperature distribution histories obtained were then used in conjunction with a structural response program. The effect of the occurrence of spalling on the structural behaviour of reinforced concrete column is also investigated. There is general recognition of the potential problems of spalling but no real investigation into what effect spalling has on the fire resistance of reinforced concrete members. In an attempt to address the situation, a method has been developed to model concrete columns exposed to fire which incorporates the effect of spalling. A total of 224 computer simulations were undertaken by varying the amounts of concrete lost during a specified period of exposure to fire. An array of six percentages of spalling were chosen for one range of simulation while a two stage progressive spalling regime was used for a second range. The quantification of the reduction in fire resistance of the columns against the amount of spalling, heating and loading patterns, and the time at which the concrete spalls appears to indicate that it is the amount of spalling which is the most significant variable in the reduction of fire resistance.

Behaviour of concrete frame structures under localised fire scenarios

This thesis encompasses an investigation of the behaviour of concrete frame structure under localised fire scenarios by implementing a constitutive model using finite-element computer program. The investigation phase included properties of material at elevated temperature, description of computer program, thermal and structural analyses. Transient thermal properties of material have been employed in this study to achieve reasonable results. The finite-element computer package of ANSYS is utilized in the present analyses to examine the effect of fire on the concrete frame under five various fire scenarios. In addition, a report of full-scale BRE Cardington concrete building designed to Eurocode2 and BS8110 subjected to realistic compartment fire is also presented. The transient analyses of present model included additional specific heat to the base value of dry concrete at temperature 100°C and 200°C. The combined convective-radiation heat transfer coefficient and transient thermal expansion have also been considered in the analyses. For the analyses with the transient strains included, the constitutive model based on empirical formula in a full thermal strain-stress model proposed by Li and Purkiss (2005) is employed. Comparisons between the models with and without transient strains included are also discussed. Results of present study indicate that the behaviour of complete structure is significantly different from the behaviour of individual isolated members based on current design methods. Although the current tabulated design procedures are conservative when the entire building performance is considered, it should be noted that the beneficial and detrimental effects of thermal expansion in complete structures should be taken into account. Therefore, developing new fire engineering methods from the study of complete structures rather than from individual isolated member behaviour is essential.

How well do the theory of reasoned action and theory of planned behaviour predict intentions and attendance at screening programmes? A meta-analysis

Meta-analysis was used to quantify how well the Theories of Reasoned Action and Planned Behaviour have predicted intentions to attend screening programmes and actual attendance behaviour. Systematic literature searches identified 33 studies that were included in the review. Across the studies as a whole, attitudes had a large-sized relationship with intention, while subjective norms and perceived behavioural control (PBC) possessed medium-sized relationships with intention. Intention had a medium-sized relationship with attendance, whereas the PBC-attendance relationship was small sized. Due to heterogeneity in results between studies, moderator analyses were conducted. The moderator variables were (a) type of screening test, (b) location of recruitment, (c) screening cost and (d) invitation to screen. All moderators affected theory of planned behaviour relationships. Suggestions for future research emerging from these results include targeting attitudes to promote intention to screen, a greater use of implementation intentions in screening information and examining the credibility of different screening providers.

Thermo-chemical behaviour and chemical product formation from Polar seaweeds during intermediate pyrolysis

Fundamental analytical pyrolysis studies of biomass from Polar seaweeds, which exhibit a different biomass composition than terrestrial and micro-algae biomass were performed via thermogravimetric analysis (TGA) and pyrolysis-gas chromatography/mass-spectrometry (Py-GC/MS). The main reason for this study is the adaptation of these species to very harsh environments making them an interesting source for thermo-chemical processing for bioenergy generation and production of biochemicals via intermediate pyrolysis. Several macroalgal species from the Arctic region Kongsfjorden, Spitsbergen/Norway (Prasiola crispa, Monostroma arcticum, Polysiphonia arctica, Devaleraea ramentacea, Odonthalia dentata, Phycodrys rubens, Sphacelaria plumosa) and from the Antarctic peninsula, Potter Cove King George Island (Gigartina skottsbergii, Plocamium cartilagineum, Myriogramme manginii, Hymencladiopsis crustigena, Kallymenia antarctica) were investigated under intermediate pyrolysis conditions. TGA of the Polar seaweeds revealed three stages of degradation representing dehydration, devolatilization and decomposition of carbonaceous solids. The maximum degradation temperatures Prasiola crispa were observed within the range of 220-320 C and are lower than typically obtained by terrestrial biomass, due to divergent polysaccharide compositions. Biochar residues accounted for 33-46% and ash contents of 27-45% were obtained. Identification of volatile products by Py-GC/MS revealed a complexity of generated chemical compounds and significant differences between the species. A widespread occurrence of aromatics (toluene, styrene, phenol and 4-methylphenol), acids (acetic acid, benzoic acid alkyl ester derivatives, 2-propenoic acid esters and octadecanoic acid octyl esters) in pyrolysates was detected. Ubiquitous furan-derived products included furfural and 5-methyl-2-furaldehyde. As a pyran-derived compound maltol was obtained by one red algal species (P. rubens) and the monosaccharide d-allose was detected in pyrolysates in one green algal (P. crispa). Further unique chemicals detected were dianhydromannitol from brown algae and isosorbide from green algae biomass. In contrast, the anhydrosugar levoglucosan and the triterpene squalene was detected in a large number of pyrolysates analysed. © 2013 Elsevier B.V. All rights reserved.

What do people think about when they answer theory of planned behaviour questionnaires? A 'think aloud' study

Two studies aiming to identify the nature and extent of problems that people have when completing theory of planned behaviour (TPB) questionnaires, using a cognitive interviewing approach are reported. Both studies required participants to 'think aloud' as they completed TPB questionnaires about: (a) increasing physical activity (six general public participants); and (b) binge drinking (13 students). Most people had no identifiable problems with the majority of questions. However, there were problems common to both studies, relating to information retrieval and to participants answering different questions from those intended by researchers. Questions about normative influence were particularly problematic. The standard procedure for developing TPB questionnaires may systematically produce problematic questions. Suggestions are made for improving this procedure. Copyright © 2007 SAGE Publications.

Crystal structure and magnetic behaviour of a five-coordinate iron(III) complex of pyridoxal-4-methylthiosemicarbazone

The crystal structure and magnetic properties of a penta-coordinate iron(III) complex of pyridoxal-4-methylthiosemicarbazone, [Fe(Hmthpy)Cl](CHCHSO), are reported. The synthesised ligand and the metal complex were characterised by spectroscopic methods (H NMR, IR, and mass spectroscopy), elemental analysis, and single crystal X-ray diffraction. The complex crystallises as dark brown microcrystals. The crystal data determined at 100(1) K revealed a triclinic system, space group P over(1, ¯) (Z = 2). The ONSCl geometry around the iron(III) atom is intermediate between trigonal bipyramidal and square pyramidal (t = 0.40). The temperature dependence of the magnetic susceptibility (5-300 K) is consistent with a high spin Fe(III) ion (S = 5/2) exhibiting zero-field splitting. Interpretation of these data yielded: D = 0.34(1) cm and g = 2.078(3). © 2007 Elsevier B.V. All rights reserved.