A methodology for the generation and evaluation of biorefinery process chains, in order to identify the most promising biorefineries for the EU

The topic of bioenergy, biofuels and bioproducts remains at the top of the current political and research agenda. Identification of the optimum processing routes for biomass, in terms of efficiency, cost, environment and socio-economics is vital as concern grows over the remaining fossil fuel resources, climate change and energy security. It is known that the only renewable way of producing conventional hydrocarbon fuels and organic chemicals is from biomass, but the problem remains of identifying the best product mix and the most efficient way of processing biomass to products. The aim is to move Europe towards a biobased economy and it is widely accepted that biorefineries are key to this development. A methodology was required for the generation and evaluation of biorefinery process chains for converting biomass into one or more valuable products that properly considers performance, cost, environment, socio-economics and other factors that influence the commercial viability of a process. In this thesis a methodology to achieve this objective is described. The completed methodology includes process chain generation, process modelling and subsequent analysis and comparison of results in order to evaluate alternative process routes. A modular structure was chosen to allow greater flexibility and allowing the user to generate a large number of different biorefinery configurations The significance of the approach is that the methodology is defined and is thus rigorous and consistent and may be readily re-examined if circumstances change. There was the requirement for consistency in structure and use, particularly for multiple analyses. It was important that analyses could be quickly and easily carried out to consider, for example, different scales, configurations and product portfolios and so that previous outcomes could be readily reconsidered. The result of the completed methodology is the identification of the most promising biorefinery chains from those considered as part of the European Biosynergy Project.

Sociolinguistic variability in oral narrative.

This thesis begins with a sociolinguistic correlational study of three phonetic variables - (h), (t) and (ing) - as used by four occupational groups - nurses, chefs, hairdressers and taxi-drivers. The groups were selected to incorporate three independent variables: sex (male-dominated versus female-dominated occupations); training (length and specialisation - nurses and chefs being more specialised than hairdressers and taxi-drivers) and location (the populations were selected from two cities - Liverpool and Birmingham). Although the correlational work demonstrates intra-sex and occupation consistency in speakers' choice of linguistic variants (females (particularly nurses) being significantly closer to the prestige norm), it is essentially non-explanatory and cannot accout for narrative dynamics and style shift. Therefore, an in-depth qualitative examination of the data (which draws mainly on Narrative and Discourse Analysis) forms the major part of the analysis. The study first analyses features common to all the narratives, direct speech, expressive phonology and linguistic ambiguity emerging as characteristic of all humorous storytelling. Secondly, three major sources of inter-personal variation are invetigated: narrator perspective, sex and occuptational role. Perspective is found to vary with topic and personality, greater narrator involvement coinciding with a higher proportion of internal evaluation devices. Sex differences include topic choice and bonding in the storytelling sessions. Sex differences are also evident in style shifting, where the narrator mimics the voice of a character in the narrative (aodpting segmental and/or prosodic tokens to signal a change of persona). The research finds that female narrators rarely employ segmental accommodation downwards on the social scale (whereas men do), but are on the other hand adept at using prosodic effects for mimicry. Taxi-drivers emerge as the group with the most distinctive narrative flair, a fact which is related to their occupation. The conclusion stresses a need for both quantitative and qualitative approaches to data; the importance of occupational role, as opposed to sex role per se in determining narrative conventions; the view of narrative as a negotiable entity, which is the product of relationships among participants; and the importance of considering the totality of the communicative act.

An experimental analysis of operating conditions in cold roll-forming

A detailed literature survey confirmed cold roll-forming to be a complex and little understood process. In spite of its growing value, the process remains largely un-automated with few principles used in set-up of the rolling mill. This work concentrates on experimental investigations of operating conditions in order to gain a scientific understanding of the process. The operating conditions are; inter-pass distance, roll load, roll speed, horizontal roll alignment. Fifty tests have been carried out under varied operating conditions, measuring section quality and longitudinal straining to give a picture of bending. A channel section was chosen for its simplicity and compatibility with previous work. Quality measurements were measured in terms of vertical bow, twist and cross-sectional geometric accuracy, and a complete method of classifying quality has been devised. The longitudinal strain profile was recorded, by the use of strain gauges attached to the strip surface at five locations. Parameter control is shown to be important in allowing consistency in section quality. At present rolling mills are constructed with large tolerances on operating conditions. By reduction of the variability in parameters, section consistency is maintained and mill down-time is reduced. Roll load, alignment and differential roll speed are all shown to affect quality, and can be used to control quality. Set-up time is reduced by improving the design of the mill so that parameter values can be measured and set, without the need for judgment by eye. Values of parameters can be guided by models of the process, although elements of experience are still unavoidable. Despite increased parameter control, section quality is variable, if only due to variability in strip material properties. Parameters must therefore be changed during rolling. Ideally this can take place by closed-loop feedback control. Future work lies in overcoming the problems connected with this control.

History and symptom taking in contact lens fitting and aftercare

Aim: To appraise history and symptom taking for contact lens consultations, to determine current practice and to make recommendations for best practice. Method: The peer reviewed academic literature was reviewed and the results informed a survey completed by 256 eye care practitioners (ECPs) on their current practice and influences. Results: The last eye-test date, last contact lens aftercare (for existing wearers) and reason for visit are key questions for most ECPs. Detailed use of contact lens questions are more commonly applied in aftercares than when refitting patients who have previously discontinued wear (87% vs 56% use), whereas questions on ocular and general history, medication and lifestyle were generally more commonly utilised for new patients than in aftercares (72% vs 50%). 75% of ECPs requested patients bring a list of their medication to appointments. Differential diagnosis questioning was thorough in most ECPs (87% of relevant questions asked). Attempts to optimise compliance included oral instruction (95% always) and written patient instructions (95% at least sometimes). Abbreviations were used by 39% of respondents (26% used ones provided by a professional body). Conclusion: There is scope for more consistency in history and symptom taking for contact lens consultations and recommendations are made.

Serum-free process development:improving the yield and consistency of human mesenchymal stromal cell production

Background aims: The cost-effective production of human mesenchymal stromal cells (hMSCs) for off-the-shelf and patient specific therapies will require an increasing focus on improving product yield and driving manufacturing consistency. Methods: Bone marrow-derived hMSCs (BM-hMSCs) from two donors were expanded for 36 days in monolayer with medium supplemented with either fetal bovine serum (FBS) or PRIME-XV serum-free medium (SFM). Cells were assessed throughout culture for proliferation, mean cell diameter, colony-forming potential, osteogenic potential, gene expression and metabolites. Results: Expansion of BM-hMSCs in PRIME-XV SFM resulted in a significantly higher growth rate (P < 0.001) and increased consistency between donors compared with FBS-based culture. FBS-based culture showed an inter-batch production range of 0.9 and 5 days per dose compared with 0.5 and 0.6 days in SFM for each BM-hMSC donor line. The consistency between donors was also improved by the use of PRIME-XV SFM, with a production range of 0.9 days compared with 19.4 days in FBS-based culture. Mean cell diameter has also been demonstrated as a process metric for BM-hMSC growth rate and senescence through a correlation (R² = 0.8705) across all conditions. PRIME-XV SFM has also shown increased consistency in BM-hMSC characteristics such as per cell metabolite utilization, in vitro colony-forming potential and osteogenic potential despite the higher number of population doublings. Conclusions: We have increased the yield and consistency of BM-hMSC expansion between donors, demonstrating a level of control over the product, which has the potential to increase the cost-effectiveness and reduce the risk in these manufacturing processes.

Faculty perceptions and readership patterns of finance journals:a global view

Journal rankings are frequently used as a measure of both journal and author research quality. Nonetheless, debates frequently arise because journal rankings do not take into account the underlying diversity of the finance research community. This study examines how factors such as a researcher's geographic origin, research interests, seniority, and journal affiliation influence journal quality perceptions and readership patterns. Based on a worldwide sample of 862 finance academics, we find remarkable consistency in the rankings of top journals. For the remaining journals, perception of journal quality differs depending on the researcher's geographic origin, research interests, seniority, and journal affiliation.

Pragmatic approach to the development of robust real-time protocols

This research is concerned with the development of distributed real-time systems, in which software is used for the control of concurrent physical processes. These distributed control systems are required to periodically coordinate the operation of several autonomous physical processes, with the property of an atomic action. The implementation of this coordination must be fault-tolerant if the integrity of the system is to be maintained in the presence of processor or communication failures. Commit protocols have been widely used to provide this type of atomicity and ensure consistency in distributed computer systems. The objective of this research is the development of a class of robust commit protocols, applicable to the coordination of distributed real-time control systems. Extended forms of the standard two phase commit protocol, that provides fault-tolerant and real-time behaviour, were developed. Petri nets are used for the design of the distributed controllers, and to embed the commit protocol models within these controller designs. This composition of controller and protocol model allows the analysis of the complete system in a unified manner. A common problem for Petri net based techniques is that of state space explosion, a modular approach to both the design and analysis would help cope with this problem. Although extensions to Petri nets that allow module construction exist, generally the modularisation is restricted to the specification, and analysis must be performed on the (flat) detailed net. The Petri net designs for the type of distributed systems considered in this research are both large and complex. The top down, bottom up and hybrid synthesis techniques that are used to model large systems in Petri nets are considered. A hybrid approach to Petri net design for a restricted class of communicating processes is developed. Designs produced using this hybrid approach are modular and allow re-use of verified modules. In order to use this form of modular analysis, it is necessary to project an equivalent but reduced behaviour on the modules used. These projections conceal events local to modules that are not essential for the purpose of analysis. To generate the external behaviour, each firing sequence of the subnet is replaced by an atomic transition internal to the module, and the firing of these transitions transforms the input and output markings of the module. Thus local events are concealed through the projection of the external behaviour of modules. This hybrid design approach preserves properties of interest, such as boundedness and liveness, while the systematic concealment of local events allows the management of state space. The approach presented in this research is particularly suited to distributed systems, as the underlying communication model is used as the basis for the interconnection of modules in the design procedure. This hybrid approach is applied to Petri net based design and analysis of distributed controllers for two industrial applications that incorporate the robust, real-time commit protocols developed. Temporal Petri nets, which combine Petri nets and temporal logic, are used to capture and verify causal and temporal aspects of the designs in a unified manner.

Developing a model for consumer product safety evaluation

Safety enforcement practitioners within Europe and marketers, designers or manufacturers of consumer products need to determine compliance with the legal test of "reasonable safety" for consumer goods, to reduce the "risks" of injury to the minimum. To enable freedom of movement of products, a method for safety appraisal is required for use as an "expert" system of hazard analysis by non-experts in safety testing of consumer goods for implementation consistently throughout Europe. Safety testing approaches and the concept of risk assessment and hazard analysis are reviewed in developing a model for appraising consumer product safety which seeks to integrate the human factors contribution of risk assessment, hazard perception, and information processing. The model develops a system of hazard identification, hazard analysis and risk assessment which can be applied to a wide range of consumer products through use of a series of systematic checklists and matrices and applies alternative numerical and graphical methods for calculating a final product safety risk assessment score. It is then applied in its pilot form by selected "volunteer" Trading Standards Departments to a sample of consumer products. A series of questionnaires is used to select participating Trading Standards Departments, to explore the contribution of potential subjective influences, to establish views regarding the usability and reliability of the model and any preferences for the risk assessment scoring system used. The outcome of the two stage hazard analysis and risk assessment process is considered to determine consistency in results of hazard analysis, final decisions regarding the safety of the sample product and to determine any correlation in the decisions made using the model and alternative scoring methods of risk assessment. The research also identifies a number of opportunities for future work, and indicates a number of areas where further work has already begun.

Qualitative psychology at M level: a dialogue between learner and teacher

There are now more postgraduate programmes that include qualitative methods in psychology than ever before. This poses problems for teaching qualitative methods at M level because we still lack consistency in what qualitative methods are taught at the undergraduate level. Although the British Psychological Society requires accredited undergraduate programmes to include qualitative methods, we hear very different stories from colleagues across the UK about provision and quality. In this article, we present a dialogue between learner and teacher about our own experiences of qualitative methods in psychology at M level. We report our own learning experiences of qualitative methods at the undergraduate level, reflect on current methods of teaching at M level, and consider ways of moving forward. As well as focusing specifically on current practice at our institution, our discussions also branch out into wider issues around the fundamental characteristics of qualitative methods, pragmatically and philosophically, as well as our own accounts of what we enjoy most about using qualitative methods in psychology.

Enhancing student learning experience through a novel electronic coursework assessment and feedback management system

Recent National Student Surveys revealed that many U.K. university students are dissatisfied with the timeliness and usefulness of the feedback received from their tutors. Ensuring timeliness in marking often results in a reduction in the quality of feedback. In Computer Science where learning relies on practising and learning from mistakes, feedback that pin-points errors and explains means of improvement is important to achieve a good student learning experience. Though suitable use of Information and Communication Technology should alleviate this problem, existing Virtual Learning Environments and e-Assessment applications such as Blackboard/WebCT, BOSS, MarkTool and GradeMark are inadequate to support a coursework assessment process that promotes timeliness and usefulness of feedback while maintaining consistency in marking involving multiple tutors. We have developed a novel Internet application, called eCAF, for facilitating an efficient and transparent coursework assessment and feedback process. The eCAF system supports detailed marking scheme editing and enables tutors to use such schemes to pin-point errors in students' work so as to provide helpful feedback efficiently. Tutors can also highlight areas in a submitted work and associate helpful feedback that clearly links to the identified mistakes and the respective marking criteria. In light of the results obtained from a recent trial of eCAF, we discuss how the key features of eCAF may facilitate an effective and efficient coursework assessment and feedback process.

Stability and continuity of parentally reported child eating behaviours and feeding practices from 2 to 5 years of age

Previous research suggests that many eating behaviours are stable in children but that obesigenic eating behaviours tend to increase with age. This research explores the stability (consistency in individual levels over time) and continuity (consistency in group levels over time) of child eating behaviours and parental feeding practices in children between 2 and 5 years of age. Thirty one participants completed measures of child eating behaviours, parental feeding practices and child weight at 2 and 5 years of age. Child eating behaviours and parental feeding practices remained stable between 2 and 5 years of age. There was also good continuity in measures of parental restriction and monitoring of food intake, as well as in mean levels of children's eating behaviours and BMI over time. Mean levels of maternal pressure to eat significantly increased, whilst mean levels of desire to drink significantly decreased, between 2 and 5 years of age. These findings suggest that children's eating behaviours are stable and continuous in the period prior to 5 years of age. Further research is necessary to replicate these findings and to explore why later developmental increases are seen in children's obesigenic eating behaviours. © 2011 Elsevier Ltd.

Pyroligneous acid:a farmer’s flexible friend?

This article is a review of the findings of key studies into the potential benefits of pyroligneous acid, arising from charcoal production, to the agricultural industry. Through a review of bioassay studies conducted on known plant and human pathogens (e.g., Agrobacterium tumefacien and Xanthomonas campestris) and arthropods, and germination studies on selected crops, the article highlights a number of potential benefits of smoke recovery in the production of charcoal. In addition, the article calls for further research into the impact, if any, of its long-term use on environmental receptors/humans and for the development of a methodology to guarantee consistency in product composition, quality, and efficacy. In doing so, it is hoped that its widespread use as part of sustainable management practices adopted in the agricultural industry will be secured.

Shape from photographs:a multi-view stereo pipeline

Acquiring 3D shape from images is a classic problem in Computer Vision occupying researchers for at least 20 years. Only recently however have these ideas matured enough to provide highly accurate results. We present a complete algorithm to reconstruct 3D objects from images using the stereo correspondence cue. The technique can be described as a pipeline of four basic building blocks: camera calibration, image segmentation, photo-consistency estimation from images, and surface extraction from photo-consistency. In this Chapter we will put more emphasis on the latter two: namely how to extract geometric information from a set of photographs without explicit camera visibility, and how to combine different geometry estimates in an optimal way. © 2010 Springer-Verlag Berlin Heidelberg.