Lean viewed as a philosophy

Purpose - The purpose of this paper is to act as a meticulous conceptual paper probing the contemporary view towards lean and illustrate that, despite its discernible benefits, the implementation record suffers as the prevailing opinion fails to encapsulate that an aspiring lean enterprise shall only succeed if it views lean as a philosophy rather than another strategy. Design/methodology/approach - The paper is based on a thorough literature search concerning the success and failure of lean implementations and acts as a precursor for one of the authors utilising a combination of methodologies; namely, interviewing, survey questionnaire and participant observation in attempting to prove his PhD hypothesis. Findings - Evidently, a cocktail of factors are needed for lean success; not only is it necessary to implement most of the technical tools but an organisation's culture needs transforming too. Furthermore, the alterations need to be implemented throughout an organisation's value chain. Lean has a major strategic significance, though its implementation procedure, HRM implications, general approach to the supplier base coupled with the overall universal conviction of viewing lean as a set of tactics rather than embracing it as a philosophy advocates that this contributes to the relatively low number of successful lean initiatives. Originality/value - The paper would prove invaluable to lean practitioners through its summation of the intricacies towards lean enterprise success and academic researchers by focusing their attention towards the necessary cultural implications. © Emerald Group Publishing Limited.

Effect of a protein and energy dense n-3 fatty acid enriched oral supplement on loss of weight and lean tissue in cancer cachexia:A randomised double blind trial

Aim: N-3 fatty acids, especially eicosapentaenoic acid (EPA), may possess anticachectic properties. This trial compared a protein and energy dense supplement enriched with n-3 fatty acids and antioxidants (experimental: E) with an isocaloric isonitrogenous control supplement (C) for their effects on weight, lean body mass (LBM), dietary intake, and quality of life in cachectic patients with advanced pancreatic cancer. Methods: A total of 200 patients (95 E; 105 C) were randomised to consume two cans/day of the E or C supplement (480 ml, 620 kcal, 32 g protein ± 2.2 g EPA) for eight weeks in a multicentre, randomised, double blind trial. Results: At enrolment, patients' mean rate of weight loss was 3.3 kg/month. Intake of the supplements (E or C) was below the recommended dose (2 cans/day) and averaged 1.4 cans/day. Over eight weeks, patients in both groups stopped losing weight (Δweight E: -0.25 kg/month versus C: -0.37 kg/month; p=0.74) and LBM (ΔLBM E: +0.27 kg/month versus C: +0.12 kg/month; p=0.88) to an equal degree (change from baseline E and C, p<0.001). In view of evident non-compliance in both E and C groups, correlation analyses were undertaken to examine for potential dose-response relationships. E patients demonstrated significant correlations between their supplement intake and weight gain (r=0.50, p<0.001) and increase in LBM (r=0.33, p=0.036). Such correlations were not statistically significant in C patients. The relationship of supplement intake with change in LBM was significantly different between E and C patients (p=0.043). Increased plasma EPA levels in the E group were associated with weight and LBM gain (r=0.50, p<0.001; r=0.51, p=0.001). Weight gain was associated with improved quality of life (p<0.01) only in the E group. Conclusion: Intention to treat group comparisons indicated that at the mean dose taken, enrichment with n-3 fatty acids did not provide a therapeutic advantage and that both supplements were equally effective in arresting weight loss. Post hoc dose-response analysis suggests that if taken in sufficient quantity, only the n-3 fatty acid enriched energy and protein dense supplement results in net gain of weight, lean tissue, and improved quality of life. Further trials are required to examine the potential role of n-3 enriched supplements in the treatment of cancer cachexia.

Investigation of the effects of low energy high dose ion bombardment in metals and compound semiconductors

The effect of low energy nitrogen molecular ion beam bombardment on metals and compound semiconductors has been studied, with the aim to investigate at the effects of ion and target properties. For this purpose, nitrogen ion implantation in aluminium, iron, copper, gold, GaAs and AIGaAs is studied using XPS and Angle Resolve XPS. A series of experimental studies on N+2 bombardment induced compositional changes, especially the amount of nitrogen retained in the target, were accomplished. Both monoenergetic implantation and non-monoenergetic ion implantation were investigated, using the VG Scientific ESCALAB 200D system and a d. c. plasma cell, respectively. When the samples, with the exception of gold, are exposed to air, native oxide layers are formed on the surfaces. In the case of monoenergetic implantation, the surfaces were cleaned using Ar+ beam bombardment prior to implantation. The materials were then bombarded with N2+ beam and eight sets of successful experiments were performed on each sample, using a rastered N2+ ion beam of energy of 2, 3, 4 and 5 keV with current densities of 1 μA/cm2 and 5 μA/cm22 for each energy. The bombarded samples were examined by ARXPS. After each complete implantation, XPS depth profiles were created using Ar+ beam at energy 2 ke V and current density 2 μA/cm2 . As the current density was chosen as one of the parameters, accurate determination of current density was very important. In the case of glow discharge, two sets of successful experiments were performed in each case, by exposing the samples to nitrogen plasma for the two conditions: at low pressure and high voltage and high pressure and low voltage. These samples were then examined by ARXPS. On the theoretical side, the major problem was prediction of the number of ions of an element that can be implanted in a given matrix. Although the programme is essentially on experimental study, but an attempt is being made to understand the current theoretical models, such as SATVAL, SUSPRE and TRIM. The experimental results were compared with theoretical predictions, in order to gain a better understanding of the mechanisms responsible. From the experimental results, considering possible experimental uncertainties, there is no evidence of significant variation in nitrogen saturation concentration with ion energy or ion current density in the range of 2-5 ke V, however, the retention characteristics of implantant seem to strongly depend on the chemical reactivity between ion species and target material. The experimental data suggests the presence of at least one thermal process. The discrepancy between the theoretical and experimental results could be the inability of the codes to account for molecular ion impact and thermal processes.

Ion bombardment induced compositional changes in compound semiconductor surfaces studied by XPS combined with LEISS

Surface compositional change of GaP, GaAs, GaSb, InP, InAs, InSb, GeSi and CdSe single crystals due to low keV noble gas ion beam bombardment has been investigated by combining X-ray Photoelectron Spectroscopy (XPS) and Low Energy Ion Scattering Spectroscopy (LEISS). The purpose of using this complementary analytical method is to obtain more complete experimental evidence of ion beam modification in surfaces of compound semiconductors and GeSi alloy to improve the understanding of the mechanisms responsible for these effects. Before ion bombardment the sample surfaces were analysed nondestructively by Angular Resolved XPS (ARXPS) and LEISS to get the initial distribution of surface composition. Ion bombardment experiments were carried out using 3keV argon ions with beam current of 1μA for a period of 50 minutes, compositional changes in the surfaces of compound semiconductors and GeSi alloy were monitored with normal XPS. After ion bombardment the surfaces were re-examined with ARXPS and LEISS. Both XPS and LEISS results showed clearly that ion bombardment will change the compositional distribution in the compound semiconductor and GeSi surfaces. In order to explain the observed experimental results, two major theories in this field, Sigmund linear collision cascade theory and the thermodynamic models based on bombardment induced Gibbsian surface segregation and diffusion, were investigated. Computer simulation using TRIM code was also carried out for assistance to the theoretical analysis. Combined the results obtained from XPS and LEISS analyses, ion bombardment induced compositional changes in compound semiconductor and GeSi surfaces are explained in terms of the bombardment induced Gibbsian surface segregation and diffusion.

Green as the new Lean:how to use Lean practices as a catalyst to greening your supply chain

The aim of this research paper is to explore and evaluate previous work focussing on the relationship and links between Lean and Green supply chain management practices. Several explanatory frameworks are explored and discussed. It is intended that evidence and insights can be developed and used: (a) to assist our understanding of where Lean practices are synergistic for Green; (b) to clarify if Green practices are synergistic for Lean; and (c) to identify opportunities for companies to use their Lean framework as a catalyst to making their processes Green. The paper provides evidence suggesting that Lean is beneficial for Green practices and the implementation of Green practices in turn also has a positive influence on existing Lean business practices. © 2010 Elsevier Ltd. All rights reserved.

A study of the impact of lean on UK manufacturing organisations that view it as a philosophy

There were three principal research aims: primarily, Lean is and always should be regarded as a business model as depicted by Toyota who is dedicated towards finding better ways of producing cars; consequently an investigation of whether organisations embracing Lean as a philosophy were indeed more triumphant. An adapted balanced scorecard was used which embraced strategic, operation and indices focused towards the future prospects of an organisation. Secondly, it was obligatory to explicitly and precisely determine whether an organisation espoused Lean as a philosophy as opposed to another process or strategy. Thirdly, since Lean has to be envisaged as a never-ending journey; it was important to map out the Lean journey and to be able to categorize the juncture an organisation occupies at any particular phase of its overall implementation. This affords an opportunity to advise an organisation of specific requirements it needs to satisfy should it wish to embrace Lean as a philosophy. The methodological approach focused on the effective deployment of survey questionnaires in sixty-eight organisations and seven extensive case studies in manufacturing organisations of varying sizes. The CIMA organisational classification, the Puttick grid and the Product-Process matrix were used to analyse the range of organisations used in this investigation. Whilst there was a requirement to investigate whether Lean indeed equates to success, pertinent performance measurement was considered decisive; the DMP Model (Maltz et al., 2003) was modified to perform this role. An unremitting theme both in literature concerning the implementation of Lean and in the research evolves around the notion of corporate cultures. Its relevance is explored further within the analysis. In accepting the premise that Lean incorporates a journey, it was fundamental to identify the voyage. Prevalent frameworks are deficient in identifying the sustainability and ideological facets of Lean. Consequently, an extensive Lean audit was developed and piloted in twenty disparate organisations.

Beyond theory:an examination of lean new product introduction practices in the UK

Interest is growing around the application of lean techniques to new product introduction (NPI). Although a relatively emergent topic compared with the application of ‘lean’ within the factory, since 2000 there has been an exponential rise in the literature on this subject. However, much of this work focuses on describing and extolling the virtues of the ‘Toyota approach’ to design. Therefore, by way of a stock take for the UK, the present authors' research has set out to understand how well lean product design practices have been adopted by leading manufacturers. This has been achieved by carrying out in-depth case studies with three carefully selected manufacturers of complex engineered products. This paper describes these studies, the detailed results and subsequent findings, and concludes that both the awareness and adoption of practices is generally embryonic and far removed from the theory advocated in the literature.