Subject identification via ECG fiducial-based systems:influence of the type of QT interval correction

Electrocardiography (ECG) has been recently proposed as biometric trait for identification purposes. Intra-individual variations of ECG might affect identification performance. These variations are mainly due to Heart Rate Variability (HRV). In particular, HRV causes changes in the QT intervals along the ECG waveforms. This work is aimed at analysing the influence of seven QT interval correction methods (based on population models) on the performance of ECG-fiducial-based identification systems. In addition, we have also considered the influence of training set size, classifier, classifier ensemble as well as the number of consecutive heartbeats in a majority voting scheme. The ECG signals used in this study were collected from thirty-nine subjects within the Physionet open access database. Public domain software was used for fiducial points detection. Results suggested that QT correction is indeed required to improve the performance. However, there is no clear choice among the seven explored approaches for QT correction (identification rate between 0.97 and 0.99). MultiLayer Perceptron and Support Vector Machine seemed to have better generalization capabilities, in terms of classification performance, with respect to Decision Tree-based classifiers. No such strong influence of the training-set size and the number of consecutive heartbeats has been observed on the majority voting scheme.

Typical performance of gallager-type error-correcting codes

The performance of Gallager's error-correcting code is investigated via methods of statistical physics. In this method, the transmitted codeword comprises products of the original message bits selected by two randomly-constructed sparse matrices; the number of non-zero row/column elements in these matrices constitutes a family of codes. We show that Shannon's channel capacity is saturated for many of the codes while slightly lower performance is obtained for others which may be of higher practical relevance. Decoding aspects are considered by employing the TAP approach which is identical to the commonly used belief-propagation-based decoding.

On the use of likert-type scales in multilevel data:Influence on aggregate variables

In multilevel analyses, problems may arise when using Likert-type scales at the lowest level of analysis. Specifically, increases in variance should lead to greater censoring for the groups whose true scores fall at either end of the distribution. The current study used simulation methods to examine the influence of single-item Likert-type scale usage on ICC(1), ICC(2), and group-level correlations. Results revealed substantial underestimation of ICC(1) when using Likert-type scales with common response formats (e.g., 5 points). ICC(2) and group-level correlations were also underestimated, but to a lesser extent. Finally, the magnitude of underestimation was driven in large part to an interaction between Likert-type scale usage and the amounts of within- and between-group variance. © Sage Publications.

Damages for breach of contract

This practical book deals solely with those damages arising as a breach of contract, where the aim of the damages is to place the plaintiff in the same position as if the contract had been performed. The book is split into three main parts: general principles such as limitations, causation, remoteness, mitigation and contributory negligence; specific breaches, such as sale of goods, supply of services, travel contracts and sale of land; and general issues and procedures. The only authoritative practitioner work focusing on this area, it provides a high-level, comprehensive and practical text.

Export memory: a preliminary investigation of its quality, its use, and its link to export performance

Exporting is one of the main ways in which organizations internationalize. With the more turbulent, heterogeneous, sophisticated and less familiar export environment, the organizational learning ability of the exporting organization may become its only source of sustainable competitive advantage. However, achieving a competitive level of learning is not easy. Companies must be able to find ways to improve their learning capability by enhancing the different aspects of the learning process. One of these is export memory. Building from an export information processing framework this research work particularly focuses on the quality of export memory, its determinants, its subsequent use in decision-making, and its ultimate relationship with export performance. Within export memory use, four export memory use dimensions have been discovered: instrumental, conceptual, legitimizing and manipulating. Results from the qualitative study based on the data from a mail survey with 354 responses reveal that the development of export memory quality is positively related with quality of export information acquisition, the quality of export information interpretation, export coordination, and integration of the information into the organizational system. Several company and environmental factors have also been examined in terms of their relationship with export memory use. The two factors found to be significantly related to the extent of export memory use are acquisition of export information quality and export memory quality. The results reveal that export memory quality is positively related to the extent of export memory use which in turn was found to be positively related to export performance. Furthermore, results of the study show that there is only one aspect of export memory use that significantly affects export performance – the extent of export memory use. This finding could mean that there is no particular type of export memory use favored since the choice of the type of use is situation specific. Additional results reveal that environmental turbulence and export memory overload have moderating effects on the relationship between export memory use and export performance.

Mechanical vibration characteristics of bell-type pump maintings

This thesis describes an analytical and experimental study to determine the mechanical characteristics of the pump mounting, bell housing type. For numerical purposes, the mount was modelled as a thin circular cylindrical shell with cutouts, stiffened with rings and stringers; the boundary conditions were considered to be either clamped-free or clamped-supporting rigid heavy mass. The theoretical study was concerned with both the static response and the free vibration characteristics of the mount. The approach was based on the Rayleigh-Ritz approximation technique using beam characteristic (axial) and trigonometric (Circumferential) functions in the displacement series, in association with the Love - Timoshenko thin shell theory. Studies were carried out to determine the effect of the supported heavy mass on the static response, frequencies and mode shapes; in addition, the effects of stringers, rings and cutouts on vibration characteristics were investigated. The static and dynamic formulations were both implemented on the Hewlett Packard 9845 computer. The experimental study was conducted to evaluate the results of the natural frequencies and mode shapes, predicted numerically. In the experimental part, a digital computer was used as an experiment controller, which allowed accurate and quick results. The following observations were made: 1. Good agreements were obtained with the results of other investigators. 2. Satisfactory agreement was achieved between the theoretical and experimental results. 3. Rings coupled the axial modal functions of the plain cylinder and tended to increase frequencies, except for the torsion modes where frequencies were reduced. Stringers coupled the circumferential modal functions and tended to decrease frequencies. The effect of rings was stronger than that of stringers. 4. Cutouts tended to reduce frequencies; in general, but this depends on the location of the cutouts; if they are near the free edge then an increase in frequencies is obtained. Cutouts coupled both axial and circumferential modal functions. 5. The supported heavy mass had similar effects to those of the rings, but in an exaggerated manner, particularly in the reduction of torsion frequencies. 6. The method of analysis was found to be a convenient analytical tool for estimating the overall behaviour of the shell with cutouts.

The choice of the model in inventory control and the cost of sophistication

This thesis is concerned with the inventory control of items that can be considered independent of one another. The decisions when to order and in what quantity, are the controllable or independent variables in cost expressions which are minimised. The four systems considered are referred to as (Q, R), (nQ,R,T), (M,T) and (M,R,T). Wiith ((Q,R) a fixed quantity Q is ordered each time the order cover (i.e. stock in hand plus on order ) equals or falls below R, the re-order level. With the other three systems reviews are made only at intervals of T. With (nQ,R,T) an order for nQ is placed if on review the inventory cover is less than or equal to R, where n, which is an integer, is chosen at the time so that the new order cover just exceeds R. In (M, T) each order increases the order cover to M. Fnally in (M, R, T) when on review, order cover does not exceed R, enough is ordered to increase it to M. The (Q, R) system is examined at several levels of complexity, so that the theoretical savings in inventory costs obtained with more exact models could be compared with the increases in computational costs. Since the exact model was preferable for the (Q,R) system only exact models were derived for theoretical systems for the other three. Several methods of optimization were tried, but most were found inappropriate for the exact models because of non-convergence. However one method did work for each of the exact models. Demand is considered continuous, and with one exception, the distribution assumed is the normal distribution truncated so that demand is never less than zero. Shortages are assumed to result in backorders, not lost sales. However, the shortage cost is a function of three items, one of which, the backorder cost, may be either a linear, quadratic or an exponential function of the length of time of a backorder, with or without period of grace. Lead times are assumed constant or gamma distributed. Lastly, the actual supply quantity is allowed to be distributed. All the sets of equations were programmed for a KDF 9 computer and the computed performances of the four inventory control procedures are compared under each assurnption.

Tetrahydrobiopterin metabolism in depression and senile dementia of Alzheimer type

Excretion of biopterin and the related pteridines neopterin and pterin was measured in urine samples from a group of 76 male and female unipolar and bipolar depressed outpatients receiving lithium therapy, and compared to 61 male and female control subjects. The ratio of neopterin to biopterin excreted (N/B) was significantly higher in the patients than the controls. The significant positive correlation between urinary neopterin and biopterin shown by the controls was absent in the patients, indicating disrupted biosynthesis of tetrahydrobiopterin.Urinary cortisol excretion in depressed patients was similar to controls, implying normal hypothalmus-pituitary-adrenal axis function in these patients, Serum folate was shown to correlate with urinary total biopterin excretion in female unipolar patients. Two groups of elderly females with senile dementia of Alzheimer type (SDAT) were examined for urinary pteridine excretion. In the first study of 10 patients, the N/B ratio was significantly higher than in 24 controls and the ratio B/B+ N significantly lower. A second study of 30 SDAT patients and 21 controls confirmed these findings. However, neopterin correlated with biopterin in both patients and controls, indicating that the alteration in tetrahydrobiopterin metabolism may be different to that shown in depression. Lithium had no effect in vivo or in vitro on Wistar rat brain or liver biosynthesis of tetrahydrobiopterin at a range of concentrations and duration of dosing period, showing that lithium was not responsible for the lowered biopterin excretion by depressed patients. No significant effects on tetrahydrobiopterin metabolism in the rat were shown by the tricyclic antidepressant imipramine, the anticonvulsant sodium valproate, the vitamin folic acid, the anticatecholaminergic agent amethylparatyrosine, the synthetic corticosteroid dexamethasone, or stimulation of natural cortisol by immobilisation stress. Scopolamine, an ant ichol inergic drug, lowered rat brain pterin which may relate to the tetrahydrobiopterin deficits shown in SDAT.

The steady state performance of converter type reactive power compensators

As a source or sink of reactive power, compensators can be made from a voltage sourced inverter circuit with the a.c. terminals of the inverter connected to the system through an inductive link and with a capacitor connected across the d.c. terminals. Theoretical calculations on linearised models of the compensators have shown that the parameters characterising the performance are the reduced firing angle and the resonance ratio. The resonance ratio is the ratio of the natural frequency of oscillation of the energy storage components in the circuit to the system frequency. The reduced firing angle of the inverter divided by the damping coefficient, β, where β is half the R to X ratio of the link between the inverter and the system. The theoretical results have been verified by computer simulation and experiment. There is a narrow range of values for the resonance ratio below which there is no appreciable improvement in performance, despite an increase in the cost of the energy storage components, and above which the performance of the equipment is poor with the current being dominated by harmonics. The harmonic performance of the equipment is improved by using multiple inverters and phase shifting transformers to increase the pulse number. The optimum value of the resonance ratio increases pulse number, indicating a reduction in the energy storage components needed at high pulse numbers. The reactive power output from the compensator varies linearly with the reduced firing angle while the losses vary as the square of it.

Determinants of entry mode choice of MNCs in emerging markets:evidence from South Africa and Egypt

It is now stylized that the importance of foreign direct investment for developing countries and emerging markets arises from the impact of the presence of multinational corporations (MNCs) in the host country on the productivity of local firms, by way of technology diffusion and competition. There is also general agreement that the extent of technology transfer by an MNC to a developing country affiliate depends on the extent of its control on the local affiliate and that, in turn, the extent of this control depends on the mode of entry of the MNC into the host country. However, the existing literature is based on the experience of developed countries and as such does not contribute to the literature on development economics. This article addresses this lacuna using unique firm-level data from South Africa and Egypt. Our results indicate that the determinants of entry mode choice not only differ between developed and developing countries, but also among developing countries. They also bring into question the role of MNCs in fostering productivity growth in developing countries.

The nature of the influence of parents on the education and occupational choice of school pupils

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Blank beam fabrication of regenerated type IA gratings

We demonstrate an idealized method for the fabrication of regenerated type IA fibre Bragg gratings using commonly available apparatus. We use this technique to show that gratings written in the same fibre with the same period may have central wavelengths which are 14.4 nm apart and have an + 11.5% and - 1.2% difference in temperature and strain coefficients, respectively. We use these results to show that temperature compensated dual grating sensor heads, of an arbitrary length, may be quickly and consistently manufactured. © 2004 IOP Publishing Ltd.