The influence of political, economic and passenger market factors on international civil aviation

Civil aviation plays an essential role in maintaining international communications. Many extraneous factors influence the daily operations of the air transport industry. This thesis begins by investigating the major categories of so­ called "external interests" in civil aviation. These are shown to have played a significant part in ensuring the need for international agreement over the adoption of regulating principles. The combination and interaction of the various influences has produced a particular type of regulatory environment in which all commercial air services have to operate. The need for such regulation and the extreme difficulty experienced in trying to define universally acceptable methods of supervision is discussed. It is shown how opportunity for the development of on-scheduled air services was created by default on the part of the European Governments.The concept of so-called "scheduled" and "non-scheduled" sectors" is considered and it is suggested that growth of the inclusive tour industry resulted from inappropriate categorisation of the air services involved. The means by which development opportunities were created for inclusive tour operations is considered and the work then investigates the importance of British air transport policy in their exploitation. The politics of British civil aviation in the post-war years is the subject of detailed examination and the process by which Independent airlines were encouraged to develop inclusive tours, is identified. This theme is expanded to demonstrate the vital contribution of British air transport policy in the restructuring of the international industry. The subsequent involvement of the United States is shown to have been directed specifically towards the satisfaction of domestic issues. British objectives, however, are considered to have been more generally concerned with improving the tariff structure. The unique opportunities for British experimentation with international fares are seen to have major influence in forcing the pace of tariff rationalisation.

State-of-the-art of ‘Lean’ in the aviation maintenance, repair, and overhaul industry

The increasing need for maintenance, repair, and overhaul (MRO) organizations to meet customers' demands in quality and reduced lead times is key to its survival within the aviation industry. Furthermore, with the unpredictability in the global market and difficulties with forecasting characteristic of the MRO industry there is an increased need for the reevaluation of the operation models of organizations within this sector. However, severe economic turmoil and ever-increasing global competition introduce the opportunity for the adoption of a resilient, tried, and tested business operation model such as 'Lean'. In order to understand this concept, its long-term viability, and its application within the aerospace MRO sector fully, this paper presents the state-of-the-art in terms of the adoption of Lean within the MRO industry by carrying out a systematic review of the literature. This paper establishes the common perception of Lean by the MRO industry and the measurable progress that has been made on the subject. Some issues and challenges are also highlighted including the misconceptions that arise from the direct transference of the perception of Lean from other industrial sectors into the aerospace MRO industry. The 'enablers and inhibitors' of Lean within the aviation industry are also discussed. This paper exposes the scarcity of the literature and the general lagging behind of the industry to the adoption of the Lean paradigm and thus highlights areas where further research is required. © 2011 Authors.

Sleep and body rhythm disturbance amongst flight crews in long-range aviation

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Assessing aviation e-marketplaces:a multi-criteria approach

After a proliferation of logistics e-Marketplaces during the dot.com boom of 1998-2000, there has been a high rate of failure and survivals are developing much more slowly than expected. This is the case in the aviation industry where a large number of B2B e-Marketplaces emerged according to the focus of aviation companies’ strategies on electronic B2B in the late 1990s. However, the current use of e-Marketplaces in the industry is low and many of them have ceased trading. The traditional e-Marketplaces model has been characterised by poor quality portals and a lack of technical standards. Such an approach is unsustainable in today’s competitive scenario. Improvements in website quality attributes may strongly contribute to the simplification of website functionality by users and speed up communication with all supply chain partners. In this context, it appears critical to develop models for the evaluation of e-Marketplace web sites. This chapter, after a discussion about the development of e-Marketplaces in the transport and logistics service industry and its application in the aviation industry, proposes a multi-criteria model for assessing different types of aeronautic B2B e-Marketplaces.

E-procurement in the aviation industry:value creation potential of B2B e-marketplaces

In academic literature, only limited research has been undertaken in exploring the value creation of B2B (Business-to-Business) e-Marketplace models in the aviation industry. The aim of this publication is a theoretical analysis to explore whether or not B2B e-Marketplaces can make a contribution to the achievement of competitive advantage in procurement in the aviation industry. The research focuses on the potential of B2B e-Marketplaces in terms of improving an airline’s competitiveness in its procurement value chain and discusses empirical results from a survey among international e-Marketplace / portal operators

Measuring water activity of aviation fuel using a polymer optical fiber Bragg grating

Poly(methyl methacrylate) (PMMA) based polymer optical fiber Bragg gratings have been used for measuring water activity of aviation fuel. Jet A-1 samples with water content ranging from 100% ERH (wet fuel) to 10 ppm (dried fuel), have been conditioned and calibrated for measurement. The PMMA based optical fiber grating exhibits consistent response and a good sensitivity of 59±3pm/ppm (water content in mass). This water activity measurement allows PMMA based optical fiber gratings to detect very tiny amounts of water in fuels that have a low water saturation point, potentially giving early warning of unsafe operation of a fuel system. © 2014 SPIE.

Towards the strategic adoption of Lean in aviation Maintenance Repair and Overhaul (MRO) industry:an empirical study into the industry's Lean status

Purpose - Despite many Maintenance Repair and Overhaul (MRO) organisations alluding their positive business performances to the adoption Lean initiatives, there is a paucity of direct literature that validates this assertion. Thus, the purpose of this paper is to study empirically via the use of an industry-wide survey to establish and extent of Lean adoption and to verify its suitability in mitigating prevalent MRO challenges. Design/methodology/approach - The empirical study contained in this paper is facilitated by an industry-wide survey to collect data from several firms across the MRO spectrum. The analysed responses from industry leaders, professionals and executives synthesised with existing literature was used in ascertaining the extent of Lean adoption within the operational framework of the industry. Findings - The empirical study helped in validating the suitability of Lean in MRO context. However, it was also observed that the focus of its application was skewed towards its production-orientated functions more than its service-orientated functions. Nonetheless, this paper presents results of the positive influence of Lean in MRO context. Research limitations/implications - This empirical study presented in this paper was carried out within a framework of key characteristics of operation. Although this approach is sufficient in assessing the industry's Lean status, further assessment can also be achieved within the context of relevant performance metrics which was not included in this paper. Practical implications - By exploring the industry's Lean status within the context of operational characteristics of operation, this study provides MRO practitioners with more awareness into some of the critical factors required for successful holistic Lean realisation. Social implications - The state-of-the-art of Lean within the aviation MRO context established through this research also contributes to the wider product-centric service environment by providing a platform that facilitates strategy development which ensures Lean success within this environment. Originality/value - Apart from validating the suitability of Lean in MRO contexts, by establishing the extent of Lean adoption within the context of the operational framework, this paper provides a clearer insight as to how successful Lean implementation can be achieved via a holistic implementation strategy balanced between the product-centric and service-centric aspects of the industry.

Aviation fuel gauging sensor utilizing multiple diaphragm sensors incorporating polymer optical fiber Bragg gratings

A high-performance fuel gauging sensor is described that uses five diaphragm-based pressure sensors, which are monitored using a linear array of polymer optical fiber Bragg gratings. The sensors were initially characterized using water, revealing a sensitivity of 98 pm/cm for four of the sensors and 86 pm/cm for the fifth. The discrepancy in the sensitivity of the fifth sensor has been explained as being a result of the annealing of the other four sensors. Initial testing in JET A-1 aviation fuel revealed the unsuitability of silicone rubber diaphragms for prolonged usage in fuel. A second set of sensors manufactured with a polyurethane-based diaphragm showed no measurable deterioration over a three month period immersed in fuel. These sensors exhibited a sensitivity of 39 pm/cm, which is less than the silicone rubber devices due to the stiffer nature of the polyurethane material used.

Air traffic controller reactions to computer assistance

The research was instigated by the Civil Aviation Authority (CAA) to examine the implications for air traffic controllers' (ATCO) job satisfaction of the possible introduction of systems incorporating computer-assisted decision making. Additional research objectives were to assess the possible costs of reductions in ATCO job satisfaction, and to recommend appropriate task allocation between ATCOs and computer for future systems design (Chapter 1). Following a review of the literature (Chapter 2) it is argued that existing approaches to systems and job design do not allow for a sufficiently early consideration of employee needs and satisfactions in the design of complex systems. The present research develops a methodology for assessing affective reactions to an existing system as a basis for making reommendations for future systems design (Chapter 3). The method required analysis of job content using two techniques: (a) task analysis (Chapter 4.1) and (b) the Job Diagnostic Survey (JDS). ATCOs' affective reactions to the several operational positions on which they work were investigated at three levels of detail: (a) Reactions to positions, obtained by ranking techniques (Chapter 4.2); (b) Reactions to job characteristics, obtained by use of JDS (Chapter 4.3); and (c) Reactions to tasks, obtained by use of Repertory Grid technique (Chapter 4.4). The conclusion is drawn that ATCOs' motivation and satisfaction is greatly dependent on the presence of challenge, often through tasks requiring the use of decision making and other cognitive skills. Results suggest that the introduction of systems incorporating computer-assisted decision making might result in financial penalties for the CAA and significant reductions in job satisfaction for ATCOs. General recommendations are made for allocation of tasks in future systems design (Chapter 5).

A study of new product market search and user adoption

The research was carried out in the Aviation Division of Dunlop Limited and was initiated as a search for more diverse uses for carbon/carbon composites. An assumed communication model of adoption was refined by introducing the concept of a two way search after making cross industry comparisons of supplier and consumer behaviour. This research has examined methods of searching for new uses for advanced technology materials. Two broad approaches were adopted. First, a case history approach investigated materials that had been in a similar oosition to carbon/carbon to see how other material producing firms had tackled the problem. Second, a questionnaire survey among industrialists examined: the role and identity of material decision makers in different sized firms; the effectiveness of various information sources and channels; and the material adoption habits of different industries. The effectiveness of selected information channels was further studied by monitoring the response to publicity given to carbon/carbon. A flow chart has been developed from the results of this research which should help any material producing firm that is contemplating the introduction of a new material to the world market. Further benefit to our understanding of the innovation and adoption of new materials would accrue from work in the followino areas: "micro" type case histories; understanding more fully the role of product champions or promoters; investigating the phase difference between incremental and radical type innovations for materials; examining the relationship between the adoption rate of new materials and the advance of technology; studying the development of cost per unit function methods for material selection; and reviewing the benefits that economy of scale studies can have on material developments. These are all suggested areas for further work.

The dynamics and control of a remotely piloted plan-symmetric helicopter

Prior to the development of a production standard control system for ML Aviation's plan-symmetric remotely piloted helicopter system, SPRITE, optimum solutions to technical requirements had yet to be found for some aspects of the work. This thesis describes an industrial project where solutions to real problems have been provided within strict timescale constraints. Use has been made of published material wherever appropriate, new solutions have been contributed where none existed previously. A lack of clearly defined user requirements from potential Remotely Piloted Air Vehicle (RPAV) system users is identified, A simulation package is defined to enable the RPAV designer to progress with air vehicle and control system design, development and evaluation studies and to assist the user to investigate his applications. The theoretical basis of this simulation package is developed including Co-axial Contra-rotating Twin Rotor (CCTR), six degrees of freedom motion, fuselage aerodynamics and sensor and control system models. A compatible system of equations is derived for modelling a miniature plan-symmetric helicopter. Rigorous searches revealed a lack of CCTR models, based on closed form expressions to obviate integration along the rotor blade, for stabilisation and navigation studies through simulation. An economic CCTR simulation model is developed and validated by comparison with published work and practical tests. Confusion in published work between attitude and Euler angles is clarified. The implementation of package is discussed. dynamic adjustment of assessment. the theory into a high integrity software Use is made of a novel technique basing the integration time step size on error Simulation output for control system stability verification, cross coupling of motion between control channels and air vehicle response to demands and horizontal wind gusts studies are presented. Contra-Rotating Twin Rotor Flight Control System Remotely Piloted Plan-Symmetric Helicopter Simulation Six Degrees of Freedom Motion ( i i)

Managing the threat of terrorism in British travel and leisure organizations

Purpose - To study how the threats of terrorism are being handled by a variety of UK companies in the travel and leisure sector in the UK in the post 9/11 era. Design/methodology/approach - A review of the literature of risk management in a world that is perceived to be more risky as a result of the terrorist attacks on the US on 11 September 2001 (9/11) is presented. Describes the application of theories of organizational resilience and institutions to frame an understanding of how managers make sense of terrorism risk and comprehend uncertainty. Reports a qualitative analysis of themes in interviews conducted with 25 managers from 6 unnamed organizations in the aviation industry (3 organizations) and the UK travel and leisure industry (3 organizations), representing a catering supplier, an airport, an airline, a tour company, a convention centre, and an arts and entertainment centre. Findings - The results indicated that the three organizations in the aviation industry prioritize threats from terrorism, whilst the three organizations in the leisure and travel sector do not, suggesting that the managers in the travel and leisure industry apply a probabilistic type of thinking and believe the likelihood of terrorism to be low. Reports that they give precedence to economic concerns and numerous other threats to the industry. Concludes that managers fall prey to the 'ludic fallacy', which conceives all odds as being calculable and hence managers conceive the terrorism risk as low while also expecting institutional factors to pre-empt and control terrorism threats, a reaction which the authors believe to be rather complacent and dangerous. Originality/value - Contributes to the research literature on risk management by revealing the gap in the ability of existing management tools and methodologies to deal with current and uncertain threats facing organizations due to terrorism.

B2B e-marketplaces in the procurement supply chain of airlines: a strategic direction for the future?:a strategic direction for the future?

With the airline industry experiencing a global economic downturn, B2B e-Business is becoming more and more the focus of airlines’ strategies. More recently, airlines have studied intensively the potential of joint-procurement possibilities and have taken measures in creating consortia-led B2B e-Marketplaces as mediators for aggregating demand and to facilitate transactions. In academic literature, limited academic research has been undertaken in exploring the value creation of B2B e-Marketplace models in the aviation industry. The aim is to conduct a theoretical analysis to explore whether or not e-Marketplaces have the potential to add value to procurement in the aviation industry. The research focuses on the potential of B2B e-Marketplaces in terms of improving an airline’s competitiveness in its procurement value chain. The theoretical framework adopted supports the identification of barriers to success and critical success factors.