14 resultados para annual speed change
em Aston University Research Archive
Resumo:
This study employs stochastic frontier analysis to analyze Malaysian commercial banks during 1996-2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalised Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68 percent, with the latter driven primarily by technical change, which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid technical change, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term cost-reducing effect in 1998, the crisis triggered a more lasting negative impact by increasing the volume of non-performing loans.
Resumo:
This study employs Stochastic Frontier Analysis (SFA) to analyse Malaysian commercial banks during 1996–2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalized Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68%, with the latter driven primarily by Technical Change (TC), which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid TC, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term costreducing effect in 1998, the crisis triggered a long-lasting negative impact by increasing the volume of nonperforming loans.
Resumo:
This study employs stochastic frontier analysis to analyze Malaysian commercial banks during 1996-2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in outputs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalised Malmquist productivity index. On average, Malaysian banks experience mild decreasing return to scale and annual productivity change of 2.37 percent, with the latter driven primarily by technical change, which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. In addition, our productivity estimates indicate that the potential for full-fledged Islamic banks and conventional banks with Islamic banking operations to overcome the output disadvantages associated with Islamic banking are relatively limited. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had an interim output-increasing effect in 1998, the crisis prompted a continuing negative impact on the output performance by increasing the volume of non-performing loans.
Resumo:
Academic and practitioner interest in how market-based organizations can drive positive social change (PSC) is steadily growing. This paper helps to recast how organizations relate to society. It integrates research on projects stimulating PSC – the transformational processes to advance societal well-being – which is fragmented across different streams of research in management and related disciplines. Focusing on the mechanisms at play in how organizations and their projects affect change in targets outside of organizational boundaries, we 1) clarify the nature of PSC as a process, 2) develop an integrative framework that specifies two distinct PSC strategies, 3) take stock of and offer a categorization scheme for change mechanisms and enabling organizational practices, and 4) outline opportunities for future research. Our conceptual framework differentiates between surface- and deep-level PSC strategies understood as distinct combinations of change mechanisms and enabling organizational practices. These strategies differ in the nature and speed of transformation experienced by the targets of change projects and the resulting quality (pervasiveness and durability), timing, and reach of social impact. Our findings provide a solid base for integrating and advancing knowledge across the largely disparate streams of management research on Corporate Social Responsibility, Social Entrepreneurship, and Base of the Pyramid, and open up important new avenues for future research on organizing for PSC and on unpacking PSC processes.
Resumo:
Presentation of an abstract
Resumo:
Purpose-In this article, we examine the nature and the extent of corporate environmental and climate change disclosures in Bangladesh. Design/methodology/ approach-For this purpose, we have undertaken a content analysis of annual reports related to the year 2008 and websites of the 100 largest companies (according to market capitalization) listed on the Dhaka Stock Exchange. We have used 24 content analysis categories to capture the relevant disclosures related to climate change and other environmental issues. Findings-Key findings of our analysis suggest that the level of environmental and climate change disclosures is very low in Bangladesh. Although 91% of companies made disclosures in at least one category, most companies disclosed information only on the ''energy usage'' category, which is a mandatory requirement. Even fewer companies made disclosures in the specific areas of climate change. No disclosure was made in the significant categories such as GHG emissions. The second most popular category related to climate change was adaptation measures. Among the other environmental disclosures, a significant finding is that only 5% of (website 6%) companies disclosed that they had an effluent treatment plant. Closer examination of the nature of disclosures suggests that most of the disclosures are positive and descriptive in nature. Originality/value-As far as we are aware, this is the first study of its kind in Bangladesh which systematically examines corporate climate change disclosures as a particular focus of research. Copyright © 2010 by Emerald Group Publishing Limited.
Resumo:
Objective: The purpose of this study was to determine the extent to which mobility indices (such as walking speed and postural sway), motor initiation, and cognitive function, specifically executive functions, including spatial planning, visual attention, and within participant variability, differentially predicted collisions in the near and far sides of the road with increasing age. Methods: Adults aged over 45 years participated in cognitive tests measuring executive function and visual attention (using Useful Field of View; UFoV®), mobility assessments (walking speed, sit-to-stand, self-reported mobility, and postural sway assessed using motion capture cameras), and gave road crossing choices in a two-way filmed real traffic pedestrian simulation. Results: A stepwise regression model of walking speed, start-up delay variability, and processing speed) explained 49.4% of the variance in near-side crossing errors. Walking speed, start-up delay measures (average & variability), and spatial planning explained 54.8% of the variance in far-side unsafe crossing errors. Start-up delay was predicted by walking speed only (explained 30.5%). Conclusion: Walking speed and start-up delay measures were consistent predictors of unsafe crossing behaviours. Cognitive measures, however, differentially predicted near-side errors (processing speed), and far-side errors (spatial planning). These findings offer potential contributions for identifying and rehabilitating at-risk older pedestrians.
Resumo:
Ashby wrote about cybernetics, during which discourse he described a Law that attempts to resolve difficulties arising in complex situations – he suggested using variety to combat complexity. In this paper, we note that the delegates to the UN Framework Convention on Climate Change (UNFCCC) meeting in Kyoto, 1997, were offered a ‘simplifying solution’ to cope with the complexity of discussing multiple pollutants allegedly contributing to ‘climate change’. We assert that the adoption of CO2eq has resulted in imprecise thinking regarding the ‘carbon footprint’ – that is, ‘CO2’ – to the exclusion of other pollutants. We propose, as Ashby might have done, that the CO2eq and other factors within the ‘climate change’ negotiations be disaggregated to allow careful and specific individual solutions to be agreed on each factor. We propose a new permanent and transparent ‘action group’ be in charge of agenda setting and to manage the messy annual meetings. This body would be responsible for achieving accords at these annual meetings, rather than forcing this task on national hosts. We acknowledge the task is daunting and we recommend moving on from Ashby's Law to Beer's Viable Systems approach.
Resumo:
The socioeconomic context in the renaissance era in Oman has resulted in the development of new forms of discursive prastises and thus, in the introduction of new genres. One of these new genres is the business annual report, which in Oman exists in English and Arabic. This thesis examines the role of translation in the production of annual reports. This research makes a contribution to the field of Translation Studies by examining institutional translation in order to gain insights into translation agents, processes, practises and underlying policies with reference to national business institutions in their sociopolitical and historical and institutional contexts .Business reports are still largely under-researched as a genre in Translation Studies. The thesis starts with an overview of relevant aspects of Translation Studies to arrive at a theoretical framework which informs the analysis. The empirical analysis is based on sixty seven reports produced by different Oman-based companies which vary in size and organisational patterns. Annual reports are characterised as a genre in terms of function and structure at the macro-level as well as the micro-level. They have an informative and a persuasive function, as they are produced by different companies in their attempt to promote and fulfil their respective business interests and objectives.The thesis presents the sociocultural and political contexts of the production of the English and Arabic versions of the annual reports, focusing on the underlying functions and principles of institutions and agents. The next chapter illustrates the textual profiles of the English and the Arabic versions, identifying typical translation strategies. The discussion here operates within the framework of product-oriented Descriptive Translation Studies (Lambert and van Gorp 1985). It is argued that the two language versions reflect aspects of ideology, political affiliation and power relations at both the macro and micro- structural levels. These ideological aspects can be seen in particular in the addition, omission and change of specific expressions which refer to religious or interpersonal aspects. These strategies signal the aim to appeal to wider Arab readers and to fulfil the agendas of different agents (government, companies, chairpersons, directors, etc.). The description of the texts is followed by an account of these aspects in terms of sociopolitical and institutional conditions in the production of the translations. For this explanation, reference is made to sociological approaches to translation, mainly building on the work of Bourdieu (1991). This thesis emphasises that the translation of annual reports is a collective effort which takes place in a particular institutional context. Consequently, the translation strategies are regulated by the objectives of the institution within which translators and other agents operate. The translations are prepared in order to meet the expectations and needs of the intended Arabic language addressees; in addition, the generic features of the reports reveal a progression of transmission and development over the course of time in the spheres of business and economy in Oman. This thesis demonstrates that business companies too can be seen as institutions which contribute significantly to disseminating business terms and concepts and promoting investment opportunities domestically and internationally through translation work.
Resumo:
We have proposed a similarity matching method (SMM) to obtain the change of Brillouin frequency shift (BFS), in which the change of BFS can be determined from the frequency difference between detecting spectrum and selected reference spectrum by comparing their similarity. We have also compared three similarity measures in the simulation, which has shown that the correlation coefficient is more accurate to determine the change of BFS. Compared with the other methods of determining the change of BFS, the SMM is more suitable for complex Brillouin spectrum profiles. More precise result and much faster processing speed have been verified in our simulation and experiments. The experimental results have shown that the measurement uncertainty of the BFS has been improved to 0.72 MHz by using the SMM, which is almost one-third of that by using the curve fitting method, and the speed of deriving the BFS change by the SMM is 120 times faster than that by the curve fitting method.
Resumo:
Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.