An optimum utilisation of plant and equipment with respect to maintenance

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Identification of key temperature measurement technologies for the enhancement of product and equipment integrity in the light controlled factory

Thermal effects in uncontrolled factory environments are often the largest source of uncertainty in large volume dimensional metrology. As the standard temperature for metrology of 20°C cannot be achieved practically or economically in many manufacturing facilities, the characterisation and modelling of temperature offers a solution for improving the uncertainty of dimensional measurement and quantifying thermal variability in large assemblies. Technologies that currently exist for temperature measurement in the range of 0-50°C have been presented alongside discussion of these temperature measurement technologies' usefulness for monitoring temperatures in a manufacturing context. Particular aspects of production where the technology could play a role are highlighted as well as practical considerations for deployment. Contact sensors such as platinum resistance thermometers can produce accuracy closest to the desired accuracy given the most challenging measurement conditions calculated to be ∼0.02°C. Non-contact solutions would be most practical in the light controlled factory (LCF) and semi-invasive appear least useful but all technologies can play some role during the initial development of thermal variability models.

The de-gaying and re-gaying of AIDS:contested homophobias in lesbian and gay awareness training

From the first recognition of AIDS as a disease, it was publicly conceptualized as a 'gay plague'. In response, health education and diversity training sought to counter this association claiming that AIDS is an 'equal opportunity' virus - that it can affect anyone. In this article, we analyse talk about HIV/AIDS within a data corpus of 13 tape-recorded lesbian and gay awareness training sessions. Counter to the way in which interactions are described in the lesbian and gay awareness training literature, we found that it was trainees, rather than trainers, who pursued discussions about HIV/AIDS, and who did so in order to claim the 'de-gaying' of AIDS, which they treated as representing a 'non-prejudiced' position. By contrast, and in response to trainees' insistence on de-gaying AIDS, trainers were 're-gaying' AIDS. Our analysis highlights that in these sessions - designed explicitly to counter homophobic attitudes - apparently 'factual' claims and counter-claims about infection rates and risk groups are underpinned by essentially contested definitions of what constitutes a 'homophobic' attitude. We conclude by pointing to the value of detailed analysis of talk-in-interaction for understanding professional practices, and suggest strategies for improving the pedagogic value of training. Copyright © 2005 SAGE Publications.

Empirical analysis of human capital development and economic growth in Europe

Recent discussion of the knowledge-based economy draws increasingly attention to the role that the creation and management of knowledge plays in economic development. Development of human capital, the principal mechanism for knowledge creation and management, becomes a central issue for policy-makers and practitioners at the regional, as well as national, level. Facing competition both within and across nations, regional policy-makers view human capital development as a key to strengthening the positions of their economies in the global market. Against this background, the aim of this study is to go some way towards answering the question of whether, and how, investment in education and vocational training at regional level provides these territorial units with comparative advantages. The study reviews literature in economics and economic geography on economic growth (Chapter 2). In growth model literature, human capital has gained increased recognition as a key production factor along with physical capital and labour. Although leaving technical progress as an exogenous factor, neoclassical Solow-Swan models have improved their estimates through the inclusion of human capital. In contrast, endogenous growth models place investment in research at centre stage in accounting for technical progress. As a result, they often focus upon research workers, who embody high-order human capital, as a key variable in their framework. An issue of discussion is how human capital facilitates economic growth: is it the level of its stock or its accumulation that influences the rate of growth? In addition, these economic models are criticised in economic geography literature for their failure to consider spatial aspects of economic development, and particularly for their lack of attention to tacit knowledge and urban environments that facilitate the exchange of such knowledge. Our empirical analysis of European regions (Chapter 3) shows that investment by individuals in human capital formation has distinct patterns. Those regions with a higher level of investment in tertiary education tend to have a larger concentration of information and communication technology (ICT) sectors (including provision of ICT services and manufacture of ICT devices and equipment) and research functions. Not surprisingly, regions with major metropolitan areas where higher education institutions are located show a high enrolment rate for tertiary education, suggesting a possible link to the demand from high-order corporate functions located there. Furthermore, the rate of human capital development (at the level of vocational type of upper secondary education) appears to have significant association with the level of entrepreneurship in emerging industries such as ICT-related services and ICT manufacturing, whereas such association is not found with traditional manufacturing industries. In general, a high level of investment by individuals in tertiary education is found in those regions that accommodate high-tech industries and high-order corporate functions such as research and development (R&D). These functions are supported through the urban infrastructure and public science base, facilitating exchange of tacit knowledge. They also enjoy a low unemployment rate. However, the existing stock of human and physical capital in those regions with a high level of urban infrastructure does not lead to a high rate of economic growth. Our empirical analysis demonstrates that the rate of economic growth is determined by the accumulation of human and physical capital, not by level of their existing stocks. We found no significant effects of scale that would favour those regions with a larger stock of human capital. The primary policy implication of our study is that, in order to facilitate economic growth, education and training need to supply human capital at a faster pace than simply replenishing it as it disappears from the labour market. Given the significant impact of high-order human capital (such as business R&D staff in our case study) as well as the increasingly fast pace of technological change that makes human capital obsolete, a concerted effort needs to be made to facilitate its continuous development.

Advances in femtosecond micromachining and inscription of micro and nano photonic devices

This thesis has focused on three key areas of interest for femtosecond micromachining and inscription. The first area is micromachining where the work has focused on the ability to process highly repeatable, high precision machining with often extremely complex geometrical structures with little or no damage. High aspect ratio features have been demonstrated in transparent materials, metals and ceramics. Etch depth control was demonstrated especially in the work on phase mask fabrication. Practical chemical sensing and microfluidic devices were also fabricated to demonstrate the capability of the techniques developed during this work. The second area is femtosecond inscription. Here, the work has utilised the non-linear absorption mechanisms associated with femtosecond pulse-material interactions to create highly localised refractive index changes in transparent materials to create complex 3D structures. The techniques employed were then utilised in the fabrication of Phase masks and Optical Coherence Tomography (OCT) phantom calibration artefacts both of which show the potential to fill voids in the development of the fields. This especially the case for the OCT phantoms where there exists no previous artefacts of known shape, allowing for the initial specification of parameters associated with the quality of OCT machines that are being taken up across the world in industry and research. Finally the third area of focus was the combination of all of the techniques developed through work in planar samples to create a range of artefacts in optical fibres. The development of techniques and methods for compensating for the geometrical complexities associated with working with the cylindrical samples with varying refractive indices allowed for fundamental inscription parameters to be examined, structures for use as power monitors and polarisers with the optical fibres and finally the combination of femtosecond inscription and ablation techniques to create a magnetic field sensor with an optical fibre coated in Terfenol-D with directional capability. Through the development of understanding, practical techniques and equipment the work presented here demonstrates several novel pieces of research in the field of femtosecond micromachining and inscription that has provided a broad range of related fields with practical devices that were previously unavailable or that would take great cost and time to facilitate.

Vibrational methods applied to NDT testing and fluid density measurement

A system for the NDI' testing of the integrity of conposite materials and of adhesive bonds has been developed to meet industrial requirements. The vibration techniques used were found to be applicable to the development of fluid measuring transducers. The vibrational spectra of thin rectangular bars were used for the NDT work. A machined cut in a bar had a significant effect on the spectrum but a genuine crack gave an unambiguous response at high amplitudes. This was the generation of fretting crack noise at frequencies far above that of the drive. A specially designed vibrational decrement meter which, in effect, measures mechanical energy loss enabled a numerical classification of material adhesion to be obtained. This was used to study bars which had been flame or plasma sprayed with a variety of materials. It has become a useful tool in optimising coating methods. A direct industrial application was to classify piston rings of high performance I.C. engines. Each consists of a cast iron ring with a channel into which molybdenum, a good bearing surface, is sprayed. The NDT classification agreed quite well with the destructive test normally used. The techniques and equipment used for the NOT work were applied to the development of the tuning fork transducers investigated by Hassan into commercial density and viscosity devices. Using narrowly spaced, large area tines a thin lamina of fluid is trapped between them. It stores a large fraction of the vibrational energy which, acting as an inertia load reduces the frequency. Magnetostrictive and piezoelectric effects together or in combination enable the fork to be operated through a flange. This allows it to be used in pipeline or 'dipstick' applications. Using a different tine geometry the viscosity loading can be predoninant. This as well as the signal decrement of the density transducer makes a practical viscometer.

How do older people with sight loss manage their general health? A qualitative study

Purpose: Older people with sight loss experience a number of barriers to managing their health. The purpose of this qualitative study was to explore how older people with sight loss manage their general health and explore the techniques used and strategies employed for health management. Methods: Semi-structured face-to-face interviews were conducted with 30 participants. Interviews were audio-recorded, transcribed verbatim and analysed using thematic analysis. Results: Health management challenges experienced included: managing multiple health conditions; accessing information; engaging in health behaviours and maintaining wellbeing. Positive strategies included: joining support groups, clubs and societies; using low vision aids; seeking support from family and friends and accessing support through health and social care services. Conclusion: Healthcare professionals need to be more aware of the challenges faced by older people with sight loss. Improved promotion of group support and charity services which are best placed to share information, provide fora to learn about coping techniques and strategies, and give older people social support to prevent isolation is needed. Rehabilitation and support services and equipment can only be beneficial if patients know what is available and how to access them. Over-reliance on self-advocacy in current healthcare systems is not conducive to patient-centred care. Implications for Rehabilitation Sight loss in older people can impact on many factors including health management. This study identifies challenges to health management and highlights strategies used by older people with sight loss to manage their health. Access to support often relies on patients seeking information for themselves. However, self-advocacy is challenging due to information accessibility barriers. Informal groups and charities play an important role in educating patients about their condition and advising on available support to facilitate health management.

The analysis and prediction of the quantity and composition of household refuse

This thesis describes the development of a simple and accurate method for estimating the quantity and composition of household waste arisings. The method is based on the fundamental tenet that waste arisings can be predicted from information on the demographic and socio-economic characteristics of households, thus reducing the need for the direct measurement of waste arisings to that necessary for the calibration of a prediction model. The aim of the research is twofold: firstly to investigate the generation of waste arisings at the household level, and secondly to devise a method for supplying information on waste arisings to meet the needs of waste collection and disposal authorities, policy makers at both national and European level and the manufacturers of plant and equipment for waste sorting and treatment. The research was carried out in three phases: theoretical, empirical and analytical. In the theoretical phase specific testable hypotheses were formulated concerning the process of waste generation at the household level. The empirical phase of the research involved an initial questionnaire survey of 1277 households to obtain data on their socio-economic characteristics, and the subsequent sorting of waste arisings from each of the households surveyed. The analytical phase was divided between (a) the testing of the research hypotheses by matching each household's waste against its demographic/socioeconomic characteristics (b) the development of statistical models capable of predicting the waste arisings from an individual household and (c) the development of a practical method for obtaining area-based estimates of waste arisings using readily available data from the national census. The latter method was found to represent a substantial improvement over conventional methods of waste estimation in terms of both accuracy and spatial flexibility. The research therefore represents a substantial contribution both to scientific knowledge of the process of household waste generation, and to the practical management of waste arisings.

Educational and behavioural interventions for anticoagulant therapy in patients with atrial fibrillation

Background Current guidelines recommend oral anticoagulation therapy for patients with atrial fibrillation who are at moderate-to-high risk of stroke, however anticoagulation control (time in therapeutic range (TTR)) is dependent on many factors. Educational and behavioural interventions may impact on patients’ ability to maintain their International Normalised Ratio (INR) control. Objectives To evaluate the effects on TTR of educational and behavioural interventions for oral anticoagulation therapy (OAT) in patients with atrial fibrillation (AF). Search methods We searched the Cochrane Central Register of Controlled Trials (CENTRAL) and the Database of Abstracts of Reviews of Effects (DARE) in The Cochrane Library (2012, Issue 7 of 12), MEDLINE Ovid (1950 to week 4 July 2012), EMBASE Classic + EMBASE Ovid (1947 to Week 31 2012), PsycINFO Ovid (1806 to 2012 week 5 July) on 8 August 2012 and CINAHL Plus with Full Text EBSCO (to August 2012) on 9 August 2012. We applied no language restrictions. Selection criteria The primary outcome analysed was TTR. Secondary outcomes included decision conflict (patient's uncertainty in making health-related decisions), percentage of INRs in the therapeutic range, major bleeding, stroke and thromboembolic events, patient knowledge, patient satisfaction, quality of life (QoL), and anxiety. Data collection and analysis The two review authors independently extracted data. Where insufficient data were present to conduct a meta-analysis, effect sizes and confidence intervals (CIs) of the included studies were reported. Data were pooled for two outcomes, TTR and decision conflict. Main results Eight trials with a total of 1215 AF patients (number of AF participants included in the individual trials ranging from 14 to 434) were included within the review. Studies included education, decision aids, and self-monitoring plus education. For the primary outcome of TTR, data for the AF participants in two self-monitoring plus education trials were pooled and did not favour self-monitoring plus education or usual care in improving TTR, with a mean difference of 6.31 (95% CI -5.63 to 18.25). For the secondary outcome of decision conflict, data from two decision aid trials favoured usual care over the decision aid in terms of reducing decision conflict, with a mean difference of -0.1 (95% CI -0.2 to -0.02). Authors' conclusions This review demonstrated that there is insufficient evidence to draw definitive conclusions regarding the impact of educational or behavioural interventions on TTR in AF patients receiving OAT. Thus, more trials are needed to examine the impact of interventions on anticoagulation control in AF patients and the mechanisms by which they are successful. It is also important to explore the psychological implications for patients suffering from this long-term chronic condition.

Educational and behavioural interventions for anticoagulant therapy in patients with atrial fibrillation

background Current guidelines recommend oral anticoagulation therapy for patients with atrial fibrillation who are at moderate-to-high risk of stroke, however anticoagulation control (time in therapeutic range (TTR)) is dependent on many factors. Educational and behavioural interventions may impact on patients’ ability to maintain their International Normalised Ratio (INR) control. Objectives To evaluate the effects on TTR of educational and behavioural interventions for oral anticoagulation therapy (OAT) in patients with atrial fibrillation (AF). Search methods We searched the Cochrane Central Register of Controlled Trials (CENTRAL) and the Database of Abstracts of Reviews of Effects (DARE) in The Cochrane Library (2012, Issue 7 of 12), MEDLINE Ovid (1950 to week 4 July 2012), EMBASE Classic + EMBASE Ovid (1947 to Week 31 2012), PsycINFO Ovid (1806 to 2012 week 5 July) on 8 August 2012 and CINAHL Plus with Full Text EBSCO (to August 2012) on 9 August 2012. We applied no language restrictions. Selection criteria The primary outcome analysed was TTR. Secondary outcomes included decision conflict (patient's uncertainty in making health-related decisions), percentage of INRs in the therapeutic range, major bleeding, stroke and thromboembolic events, patient knowledge, patient satisfaction, quality of life (QoL), and anxiety. Data collection and analysis The two review authors independently extracted data. Where insufficient data were present to conduct a meta-analysis, effect sizes and confidence intervals (CIs) of the included studies were reported. Data were pooled for two outcomes, TTR and decision conflict. Main results Eight trials with a total of 1215 AF patients (number of AF participants included in the individual trials ranging from 14 to 434) were included within the review. Studies included education, decision aids, and self-monitoring plus education. For the primary outcome of TTR, data for the AF participants in two self-monitoring plus education trials were pooled and did not favour self-monitoring plus education or usual care in improving TTR, with a mean difference of 6.31 (95% CI -5.63 to 18.25). For the secondary outcome of decision conflict, data from two decision aid trials favoured usual care over the decision aid in terms of reducing decision conflict, with a mean difference of -0.1 (95% CI -0.2 to -0.02). Authors' conclusions This review demonstrated that there is insufficient evidence to draw definitive conclusions regarding the impact of educational or behavioural interventions on TTR in AF patients receiving OAT. Thus, more trials are needed to examine the impact of interventions on anticoagulation control in AF patients and the mechanisms by which they are successful. It is also important to explore the psychological implications for patients suffering from this long-term chronic condition.

Reliability modelling and verification of manufacturing processes based on process knowledge management

Reliability modelling and verification is indispensable in modern manufacturing, especially for product development risk reduction. Based on the discussion of the deficiencies of traditional reliability modelling methods for process reliability, a novel modelling method is presented herein that draws upon a knowledge network of process scenarios based on the analytic network process (ANP). An integration framework of manufacturing process reliability and product quality is presented together with a product development and reliability verification process. According to the roles of key characteristics (KCs) in manufacturing processes, KCs are organised into four clusters, that is, product KCs, material KCs, operation KCs and equipment KCs, which represent the process knowledge network of manufacturing processes. A mathematical model and algorithm is developed for calculating the reliability requirements of KCs with respect to different manufacturing process scenarios. A case study on valve-sleeve component manufacturing is provided as an application example of the new reliability modelling and verification procedure. This methodology is applied in the valve-sleeve component manufacturing processes to manage and deploy production resources.

Review of industrial temperature measurement technologies and research priorities for the thermal characterisation of the factories of the future

As the largest source of dimensional measurement uncertainty, addressing the challenges of thermal variation is vital to ensure product and equipment integrity in the factories of the future. While it is possible to closely control room temperature, this is often not practical or economical to realise in all cases where inspection is required. This article reviews recent progress and trends in seven key commercially available industrial temperature measurement sensor technologies primarily in the range of 0 °C–50 °C for invasive, semi-invasive and non-invasive measurement. These sensors will ultimately be used to measure and model thermal variation in the assembly, test and integration environment. The intended applications for these technologies are presented alongside some consideration of measurement uncertainty requirements with regard to the thermal expansion of common materials. Research priorities are identified and discussed for each of the technologies as well as temperature measurement at large. Future developments are briefly discussed to provide some insight into which direction the development and application of temperature measurement technologies are likely to head.

Theory of hybrid computational and physical measurement-based integration of thermal and dimensional measurement

In dimensional metrology, often the largest source of uncertainty of measurement is thermal variation. Dimensional measurements are currently scaled linearly, using ambient temperature measurements and coefficients of thermal expansion, to ideal metrology conditions at 20˚C. This scaling is particularly difficult to implement with confidence in large volumes as the temperature is unlikely to be uniform, resulting in thermal gradients. A number of well-established computational methods are used in the design phase of product development for the prediction of thermal and gravitational effects, which could be used to a greater extent in metrology. This paper outlines the theory of how physical measurements of dimension and temperature can be combined more comprehensively throughout the product lifecycle, from design through to the manufacturing phase. The Hybrid Metrology concept is also introduced: an approach to metrology, which promises to improve product and equipment integrity in future manufacturing environments. The Hybrid Metrology System combines various state of the art physical dimensional and temperature measurement techniques with established computational methods to better predict thermal and gravitational effects.

Purification of phosphoric acid by solvent extraction

This work follows a feasibility study (187) which suggested that a process for purifying wet-process phosphoric acid by solvent extraction should be economically viable. The work was divided into two main areas, (i) chemical and physical measurements on the three-phase system, with or without impurities; (ii) process simulation and optimization. The object was to test the process technically and economically and to optimise the type of solvent. The chemical equilibria and distribution curves for the system water - phosphoric acid - solvent for the solvents n-amyl alcohol, tri-n-butyl phosphate, di-isopropyl ether and methyl isobutyl ketone have been determined. Both pure phosphoric acid and acid containing known amounts of naturally occurring impurities (Fe P0 4 , A1P0 4 , Ca3(P04)Z and Mg 3(P0 4 )Z) were examined. The hydrodynamic characteristics of the systems were also studied. The experimental results obtained for drop size distribution were compared with those obtainable from Hinze's equation (32) and it was found that they deviated by an amount related to the turbulence. A comprehensive literature survey on the purification of wet-process phosphoric acid by organic solvents has been made. The literature regarding solvent extraction fundamentals and equipment and optimization methods for the envisaged process was also reviewed. A modified form of the Kremser-Brown and Souders equation to calculate the number of contact stages was derived. The modification takes into account the special nature of phosphoric acid distribution curves in the studied systems. The process flow-sheet was developed and simulated. Powell's direct search optimization method was selected in conjunction with the linear search algorithm of Davies, Swann and Campey. The objective function was defined as the total annual manufacturing cost and the program was employed to find the optimum operating conditions for anyone of the chosen solvents. The final results demonstrated the following order of feasibility to purify wet-process acid: di-isopropyl ether, methylisobutyl ketone, n-amyl alcohol and tri-n-butyl phosphate.