Zwei Wege zur 'Aufhellung der Finsternisse in der Welt'. Zum untergründigen Wechselverhältnis von Literatur & Malerei bei Thomas Bernhard & Francis Bacon:for subterranean exchange relationship between literature and painting in Thomas Bernhard & Francis Bacon

This chapter undertakes the first examination of the role the fine arts play in Thomas Bernhard’s prose works. Though not as prominent as the role of music, painting and the fine arts play a crucial role in Frost and Alte Meister; these two novels coincidentally also happen to be the first and last novels written by Bernhard. This chapter takes its cue from the positive role awarded to Francis Bacon in the novel Das Kalkwerk. Comparing and contrasting the relation and influence between the art of Bacon and the literature of Bernhard, I am able to demonstrate a number of surprising analogies. Following a brief biographical synopsis, I focus on four aesthetic operations that are crucial to both artists. Using the key terms of ‘middle way’, ‘variation’, ‘vibration’ and ‘mediation’, I am able to uncover surprising similarities between the novels and the paintings. These hidden connections are further confirmed by looking at the two artists’ shared major motifs, namely the slaughterhouse, the scream, the relation between animals and humans, and pain. This bleak outlook on the state of human civilisation that these two major artists of the end of the 20th century share, embodies both a warning and a prophesy for the 21st century.

Experimental studies of lobe growth in the lichen Parmelia conspersa (Ehrh. Ex Ach.) Ach.

The radial growth of individual lobes of the foliose lichen, Parmelia conspersa (Ehrh. Ex Ach.) Ach. was studied to determine whether (1) adjacent lobes exchange carbohydrate and (2) marginal competition between lobes influences radial growth. In a survey of thalli of different size, the number of marginal lobes was linearly related to thallus circumference. However, the relationship between mean lobe width and thallus circumference was fitted by a second order polynomial. Hence, mean lobe width may reach a maximum in thalli approx. 3 cm in diameter. The interactions between marginal lobes were studied by either painting single lobes with acrylic paint or by removing lobes from the thallus. Painting the whole lobe virtually stopped its radial growth while partially painted lobes grew less than control lobes. The radial growth of a lobe was unaffected by either completely painting or removing its neighbour. Removal of both neighbouring lobes did not influence the radial growth of a lobe but severing the lobe from the thallus reduced its radial growth. In addition, lobe width increased significantly when both neighbouring lobes were removed. These results suggest that adjacent lobes have a considerable degree of independence and that there is little exchange of carbohydrate between them. In addition, marginal competition between adjacent lobes may restrict the lateral extension of the lobe and this may maintain a more constant mean lobe width in larger thalli. It is possible that the intensity of marginal competition between adjacent lobes may vary with thallus size and this could be a factor determining the growth curve of a foliose lichen throughout its life.

Does radial growth of the lichen Parmelia conspersa depend exclusively on growth processes at the lobe tip?

The objective of this study was to test the hypothesis that the radial growth of lobes of the lichen Parmelia conspersa depends largely on growth processes which occur at the lobe tip. First, individual lobes were removed from thalli and portions of the lobe removed to within various distances from the tip. Radial growth of the lobe was unaffected until less than 2 mm of the lobe tip remained. Second, the surfaces of individual lobes were painted with acrylic paint leaving different portions of the lobe exposed. Painting lobes to within 0.5 mm and 1 mm of the tip substantially reduced radial growth. Third, the levels of ribitol, arabitol and mannitol were measured in different regions behind the lobe tip on four occasions during 1994. The concentration of the three carbohydrates was greatest at the lobe tip and the levels declined linearly with distance from the tip. Fourth, painting one vertical half of the lobe tip did not affect radial growth but artificially bisecting the lobe tip with a scalpel reduced radial growth. Although transport of carbohydrate from other regions of the lobe cannot be ruled out, the results support the hypothesis that radial growth in P. conspersa depends largely on processes within a region approximately 2 mm behind the lobe tip.

The preparation of carbon fibres: a study of the physics and chemistry of the preparation of carbon fibres from acrylic precursors

High strength, high modulus carbon fibres are becoming increasingly important as high performance engineering materials. This thesis describes how they may be prepared by heat treatment from filaments spun from polyacrylonitrile and its copolymers. The chemistry of the first stages of heat treatment is very important in controlling the mechanical properties of the carbonised product. A cyclisation reaction has been found to be responsible for the relatively high thermal stability of pyrolysed polyacrylonitrile, but without oxidation the fibres degrade and fuse. An initial oxidation stage is, therefore, essential to the preparation of fibre of high orientation. The cyclised product of pyrolysis is probably a poly 1,4 dihydropiridine and oxidation converts this to aromatic structures, and cyclised structures containing carbonyl and other oxygenated groups. Oxidation is found to assist the carbon fibre preparation process, by producing a product which condenses at an earlier stage of heat treatment, before fusion can occur. Carbon fibre strength and modulus are dependent upon producing a highly oriented crystal structure. While oxidation of the polymer stabilises the fibre so as to prevent disorientation, further large increases in orientation, with a commensurate improvement in strength and modulus, can be obtained by stretching at temperatures above 1,700 °C. This process is analogous to the way fibre orientation is increased by the stretching of the precursor. A lamellar graphite structure can be created in high temperature fibre, by carefully controlling the degree of oxidation. This type of graphite can produce very high values of Young's modulus. More often, however, graphite fibre has a fibrillar fine structure, which is explicable in terms of continuous graphite ribbons. A ribbon model is the most satisfactory representation of the structure of carbon fibre, as it explains the mechanism of the development of long range order and the variation of Young's modulus with crystalline preferred orientation.

Powder painting of aluminium

The mechanisms involved in the production of chromate-phosphate conversion coatings on aluminium have been investigated. A sequence of coating nucleation and growth has been outlined and the principle roles of the constituent ingredients of the chromate-phosphate solution have been shown. The effect of dissolved aluminium has been studied and its role in producing sound conversion coatings has been shown. Metallic contamination has been found to have a dramatic influence on chromate-phosphate coatings when particular levels have been exceeded. Coating formation was seen to be affected in proportion to the level of contaminaton; no evidence of sudden failure was noted. The influence of substrate and the effect of an acidic cleaner prior to conversion coating have been studied and explained. It was found that the cleaner ages rapidly and that this must .be allowed for when attempting to reproduce industrial conditions in the laboratory. A study was carried out on the flowing characteristics of polyester powders of various size distributions as they melt using the hot-stage microscopy techniques developed at Aston. It was found that the condition of the substrate (ie extent of pretreatment), had a significant effect on particle flow. This was explained by considering the topography of the substrate surface. A number of 'low-bake' polyester powders were developed and tested for mechanical, physical and chemical resistance. The best formulation had overall properties which were as good as the standard polyester in many respects. However chemical resistance was found to be slightly lower. The charging characteristics of powder paints during application by means of electrostatic spraying was studied by measuring the charge per unit mass and relating this to the surface area. A high degree of correlation was found between charge carried and surface area, and the charge retained was related to the powder's formulation.

Clinical outcomes after implantation of a new hydrophobic acrylic toric IOL during routine cataract surgery

PURPOSE: To assess the clinical outcomes after implantation of a new hydrophobic acrylic toric intraocular lens (IOL) to correct preexisting corneal astigmatism in patients having routine cataract surgery. SETTING: Four hospital eye clinics throughout Europe. DESIGN: Cohort study. METHODS: This study included eyes with at least 0.75 diopter (D) of preexisting corneal astigmatism having routine cataract surgery. Phacoemulsification was performed followed by insertion and alignment of a Tecnis toric IOL. Patients were examined 4 to 8 weeks postoperatively; uncorrected distance visual acuity (UDVA), corrected distance visual acuity, manifest refraction, and keratometry were measured. Individual patient satisfaction with uncorrected vision and the surgeon’s assessment of ease of handling and performance of the IOL were also documented. The cylinder axis of the toric IOL was determined by dilated slitlamp examination. RESULTS: The study enrolled 67 eyes of 60 patients. Four to 8 weeks postoperatively, the mean UDVA was 0.15 logMAR G 0.17 (SD) and the UDVA was 20/40 or better in 88% of eyes. The mean refractive cylinder decreased significantly postoperatively, from -1.91 +/- 1.07 D to -0.67 +/- 0.54 D. No significant change in keratometric cylinder was observed. The mean absolute IOL misalignment from the intended axis was 3.4 degrees (range 0 to 12 degrees). The good UDVA resulted in high levels of patient satisfaction. CONCLUSION: Implantation of the new toric IOL was an effective, safe, and predictable method to manage corneal astigmatism in patients having routine cataract surgery.

Multifunctional bioactive glass scaffolds coated with layers of poly(d,l-lactide-co-glycolide) and poly(n-isopropylacrylamide-co-acrylic acid) microgels loaded with vancomycin

A new family of multifunctional scaffolds, incorporating selected biopolymer coatings on basic Bioglass® derived foams has been developed. The polymer coatings were investigated as carrier of vancomycin which is a suitable drug to impart antibiotic function to the scaffolds. It has been proved that coating with PLGA (poly(lactic-co-glycolic acid)) with dispersed vancomycin-loaded microgels provides a rapid delivery of drug to give antibacterial effects at the wound site and a further sustained release to aid mid to long-term healing. Furthermore, the microgels also improved the bioactivity of the scaffolds by acting as nucleation sites for the formation of HA crystals in simulated body fluid. © 2013 Elsevier B.V. All rights reserved.

New oil modified acrylic polymer for pH sensitive drug release:experimental results and statistical analysis

We report results of an experimental study, complemented by detailed statistical analysis of the experimental data, on the development of a more effective control method of drug delivery using a pH sensitive acrylic polymer. New copolymers based on acrylic acid and fatty acid are constructed from dodecyl castor oil and a tercopolymer based on methyl methacrylate, acrylic acid and acryl amide were prepared using this new approach. Water swelling characteristics of fatty acid, acrylic acid copolymer and tercopolymer respectively in acid and alkali solutions have been studied by a step-change method. The antibiotic drug cephalosporin and paracetamol have also been incorporated into the polymer blend through dissolution with the release of the antibiotic drug being evaluated in bacterial stain media and buffer solution. Our results show that the rate of release of paracetamol getss affected by the pH factor and also by the nature of polymer blend. Our experimental data have later been statistically analyzed to quantify the precise nature of polymer decay rates on the pH density of the relevant polymer solvents. The time evolution of the polymer decay rates indicate a marked transition from a linear to a strictly non-linear regime depending on the whether the chosen sample is a general copolymer (linear) or a tercopolymer (non-linear). Non-linear data extrapolation techniques have been used to make probabilistic predictions about the variation in weight percentages of retained polymers at all future times, thereby quantifying the degree of efficacy of the new method of drug delivery.