Drinking while thirsty can lead to conditioned increases in consumption

A within-subject design was used to test whether repeatedly drinking a novel-flavoured and coloured drink while thirsty would influence subsequent liking for or consumption of that drink, compared to a different flavoured and coloured drink repeatedly consumed while less thirsty. Each participant was given 300 ml of one flavoured drink (H) after consuming a high salt meal (5.27 g of salt), and 300 ml of another flavoured drink (L) after consuming a low salt meal (1.27 g of salt). Participants had 4 sessions with each meal-type/drink combination, in an intermixed order. Pre- and post-training assessments of the drinks were conducted to determine the impact of the training regime on pleasantness and perceived thirst-quenching effect of the drinks. The final session included a choice test, and ad libitum access to the chosen drink, after either a high or low salt meal. In this final choice session, people drank almost twice as much H as L; however, there were no differential effects of past training on rated liking or choice. The increased consumption of H might reflect greater liking for H which was not detected by the rating scales; or it might reflect the learning of greater "conditioned thirst" in response to the flavour of H. © 2002 Elsevier Science Ltd. All rights reserved.

A Generic model for the design and analysis of production systems

This dissertation studies the process of operations systems design within the context of the manufacturing organization. Using the DRAMA (Design Routine for Adopting Modular Assembly) model as developed by a team from the IDOM Research Unit at Aston University as a starting point, the research employed empirically based fieldwork and a survey to investigate the process of production systems design and implementation within four UK manufacturing industries: electronics assembly, electrical engineering, mechanical engineering and carpet manufacturing. The intention was to validate the basic DRAMA model as a framework for research enquiry within the electronics industry, where the initial IDOM work was conducted, and then to test its generic applicability, further developing the model where appropriate, within the other industries selected. The thesis contains a review of production systems design theory and practice prior to presenting thirteen industrial case studies of production systems design from the four industry sectors. The results and analysis of the postal survey into production systems design are then presented. The strategic decisions of manufacturing and their relationship to production systems design, and the detailed process of production systems design and operation are then discussed. These analyses are used to develop the generic model of production systems design entitled DRAMA II (Decision Rules for Analysing Manufacturing Activities). The model contains three main constituent parts: the basic DRAMA model, the extended DRAMA II model showing the imperatives and relationships within the design process, and a benchmark generic approach for the design and analysis of each component in the design process. DRAMA II is primarily intended for use by researchers as an analytical framework of enquiry, but is also seen as having application for manufacturing practitioners.

Benefits of electronic vision enhancement systems (EVES) for the visually impaired

PURPOSE: To examine whether objective performance of near tasks is improved with various electronic vision enhancement systems (EVES) compared with the subject's own optical magnifier. DESIGN: Experimental study, randomized, within-patient design. METHODS: This was a prospective study, conducted in a hospital ophthalmology low-vision clinic. The patient population comprised 70 sequential visually impaired subjects. The magnifying devices examined were: patient's optimum optical magnifier; magnification and field-of-view matched mouse EVES with monitor or head-mounted display (HMD) viewing; and stand EVES with monitor viewing. The tasks performed were: reading speed and acuity; time taken to track from one column of print to the next; follow a route map, and locate a specific feature; and identification of specific information from a medicine label. RESULTS: Mouse EVES with HMD viewing caused lower reading speeds than stand EVES with monitor viewing (F = 38.7, P < .001). Reading with the optical magnifier was slower than with the mouse or stand EVES with monitor viewing at smaller print sizes (P < .05). The column location task was faster with the optical magnifier than with any of the EVES (F = 10.3, P < .001). The map tracking and medicine label identification task was slower with the mouse EVES with HMD viewing than with the other magnifiers (P < .01). Previous EVES experience had no effect on task performance (P > .05), but subjects with previous optical magnifier experience were significantly slower at performing the medicine label identification task with all of the EVES (P < .05). CONCLUSIONS: Although EVES provide objective benefits to the visually impaired in reading speed and acuity, together with some specific near tasks, some can be performed just as fast using optical magnification. © 2003 by Elsevier Inc. All rights reserved.

Repeatability of ocular aberration measurements in patients with keratoconus

Purpose: To explore the repeatability of lower-order and higher-order ocular aberrations measured in patients with keratoconus. Methods: The IRX-3 (Imagine Eyes, Paris, France) aberrometer was used to record lower-order and higher-order aberrations in 31 eyes of 31 patients with keratoconus. Four monocular measurements were taken consecutively for each patient. The aberrometry data were analysed up to the 5th Zernike order for a 4-mm pupil diameter. The data were evaluated using repeated-measures anova and Friedman analyses. Repeatability was analysed using within-subject standard deviation (SW) and the repeatability limit (r) calculated as 1.96 ×√2×Sw. Results: Of the 11 aberration terms evaluated, the repeatability of Z (2,0) (mean= 1.36μm; SW=0.09μm; r=0.26μm); Z (2,±2) RMS (mean=1.05μm; SW= 0.09μm; r=0.24μm) and Z (4,0) aberrations (mean=0.34μm; SW=0.09 μm; r=0.24μm) showed the highest variability. In contrast, Z (3,±1) RMS aberrations (mean=0.85μm; SW=0.06μm; r=0.16μm) and Z (4,±2) RMS aberrations (mean=0.40μm; SW=0.07μm; r=0.18μm) showed comparatively better repeatability. Conclusions: The lower-order and higher-order aberrations measured in this group of keratoconic patients showed higher levels of variability compared to previous investigations of visually-normal subjects. These results may be of interest to eyecare practitioners involved in the design and fitting of aberration-controlling contact lenses for patients with keratoconus. © 2011 The College of Optometrists.

Practice based learning for automotive engineering design students

The automotive industry combines a multitude of professionals to develop a modern car successfully. Within the design and development teams the collaboration and interface between Engineers and Designers is critical to ensure design intent is communicated and maintained throughout the development process. This study highlights recent industry practice with the emergence of Concept Engineers in design teams at Jaguar Land Rover Automotive group. The role of the Concept Engineer emphasises the importance of the Engineering and Design/Styling interface with the Concept engineer able to interact and understand the challenges and specific languages of each specialist area, hence improving efficiency and communication within the design team. Automotive education tends to approach design from two distinct directions, that of engineering design through BSc courses or a more styling design approach through BA and BDes routes. The educational challenge for both types of course is to develop engineers and stylist's who have greater understanding and experience of each other's specialist perspective of design and development. The study gives examples of two such courses in the UK who are developing programmes to help students widen their understanding of the engineering and design spectrum. Initial results suggest the practical approach has been well received by students and encouraged by industry as they seek graduates with specialist knowledge but also a wider appreciation of their role within the design process.

Modelling manufacturing planning and control systems:the application of object-oriented principles and discrete-event simulation

Manufacturing planning and control systems are fundamental to the successful operations of a manufacturing organisation. 10 order to improve their business performance, significant investment is made by companies into planning and control systems; however, not all companies realise the benefits sought Many companies continue to suffer from high levels of inventory, shortages, obsolete parts, poor resource utilisation and poor delivery performance. This thesis argues that the fit between the planning and control system and the manufacturing organisation is a crucial element of success. The design of appropriate control systems is, therefore, important. The different approaches to the design of manufacturing planning and control systems are investigated. It is concluded that there is no provision within these design methodologies to properly assess the impact of a proposed design on the manufacturing facility. Consequently, an understanding of how a new (or modified) planning and control system will perform in the context of the complete manufacturing system is unlikely to be gained until after the system has been implemented and is running. There are many modelling techniques available, however discrete-event simulation is unique in its ability to model the complex dynamics inherent in manufacturing systems, of which the planning and control system is an integral component. The existing application of simulation to manufacturing control system issues is limited: although operational issues are addressed, application to the more fundamental design of control systems is rarely, if at all, considered. The lack of a suitable simulation-based modelling tool does not help matters. The requirements of a simulation tool capable of modelling a host of different planning and control systems is presented. It is argued that only through the application of object-oriented principles can these extensive requirements be achieved. This thesis reports on the development of an extensible class library called WBS/Control, which is based on object-oriented principles and discrete-event simulation. The functionality, both current and future, offered by WBS/Control means that different planning and control systems can be modelled: not only the more standard implementations but also hybrid systems and new designs. The flexibility implicit in the development of WBS/Control supports its application to design and operational issues. WBS/Control wholly integrates with an existing manufacturing simulator to provide a more complete modelling environment.

EpiTOP—a proteochemometric tool for MHC class II binding prediction

Motivation: T-cell epitope identification is a critical immunoinformatic problem within vaccine design. To be an epitope, a peptide must bind an MHC protein. Results: Here, we present EpiTOP, the first server predicting MHC class II binding based on proteochemometrics, a QSAR approach for ligands binding to several related proteins. EpiTOP uses a quantitative matrix to predict binding to 12 HLA-DRB1 alleles. It identifies 89% of known epitopes within the top 20% of predicted binders, reducing laboratory labour, materials and time by 80%. EpiTOP is easy to use, gives comprehensive quantitative predictions and will be expanded and updated with new quantitative matrices over time.

Developing and evaluating a methodology for business process improvement

Purpose – There appears to be an ever-insatiable demand from markets for organisations to improve their products and services. To meet this, there is a need to provide business process improvement (BPI) methodologies that are holistic, structured and procedural. Therefore, this paper describes research that has formed and tested a generic and practical methodology termed model-based and integrated process improvement (MIPI) to support the implementation of BPI; and to validate its effectiveness in organisations. This methodology has been created as an aid for practitioners within organisations. Design/methodology/approach – The research objectives were achieved by: reviewing and analysing current methodologies, and selecting a few frameworks against key performance indicators. Using a refined Delphi approach and semi-structured interview with the “experts” in the field. Intervention, case study and process research approach to evaluating a methodology. Findings – The BPI methodology was successfully formed and applied by the researcher and directly by the companies involved against the criteria of feasibility, usability and usefulness. Research limitations/implications – The paper has demonstrated a new knowledge on how to systematically assess a BPI methodology in practice. Practical implications – Model-based and integrated process improvement methodology (MIPI) methodology offers the practitioner (experienced and novice) a set of step-by-step aids necessary to make informed, consistent and efficient changes to business processes. Originality/value – The novelty of this research work is the creation of a holistic workbook-based methodology with relevant tools and techniques. It extends the capabilities of existing methodologies.

Servitization of manufacture:exploring the deployment and skills of people critical to the delivery of advanced services

Purpose - This "research note" sets out to fuel the debate around the practices and technologies within operations that are critical to success with servitization. It presents a study of four companies which are delivering advanced services and reports on the organisation and skill-sets of people within these. Design/methodology/approach - This has been case-based research at four manufacturers leading in their delivery of services. Findings - It describes the desirable behaviour of people in the front-line of service delivery, identifies the supporting skill-sets, how these people are organised, and explains why all these factors are so important. Originality/value - This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © 2013 Emerald Group Publishing Limited. All rights reserved.

Placebo expectancy effects in the relationship between glucose and cognition

The present study investigated the extent of expectancy in the ability of glucose to affect cognitive performance. Using a within-subjects design, subjects (n 26) completed four experimental sessions (in counterbalanced order and after an initial practice session) during which they were given a 500 ml drink 30 min prior to completing a cognitive assessment battery. In addition, all subjects completed a baseline practice session during which they were given no drink. During two of the sessions, subjects were given a drink containing 50 g glucose and on the other two they were given a drink containing aspartame. A balanced placebo design was used, such that for half the sessions subjects were accurately informed as to the content of the drink (glucose or aspartame), whereas in the other two sessions they were misinformed as to the content of the drink. The task battery comprised a 6 min visual analogue of the Bakan vigilance task, an immediate verbal free-recall task, an immediate verbal recognition memory task and a measure of motor speed (two-finger tapping). Blood glucose and self-reported mood were also recorded at several time points during each session. Glucose administration was found to improve recognition memory times, in direct contrast to previous findings in the literature. Glucose administration also improved performance on the Bakan task (relative to the control drink), but only in sessions where subjects were informed that they would receive glucose and not when they were told that they would receive aspartame. There were no effects either of the nature of the drink or expectancy on the other measures. These results are interpreted in terms of there being some contribution of expectancy concerning the positive effects of glucose on cognition in studies which have not used an equi-sweet dose of aspartame as a control drink.

Truthiness and falsiness of trivia claims depend on judgmental contexts

When people rapidly judge the truth of claims presented with or without related but nonprobative photos, the photos tend to inflate the subjective truth of those claims-a "truthiness" effect (Newman et al., 2012). For example, people more often judged the claim "Macadamia nuts are in the same evolutionary family as peaches" to be true when the claim appeared with a photo of a bowl of macadamia nuts than when it appeared alone. We report several replications of that effect and 3 qualitatively new findings: (a) in a within-subjects design, when people judged claims paired with a mix of related, unrelated, or no photos, related photos produced truthiness but unrelated photos had no significant effect relative to no photos; (b) in a mixed design, when people judged claims paired with related (or unrelated) and no photos, related photos produced truthiness and unrelated photos produced "falseness;" and © in a fully between design, when people judged claims paired with either related, unrelated, or no photos, neither truthiness nor falsiness occurred. Our results suggest that photos influence people's judgments when a discrepancy arises in the expected ease of processing, and also support a mechanism in which-against a backdrop of an expected standard-related photos help people generate pseudoevidence to support claims. (PsycINFO Database Record)

Identifying (territorial) tensions in the servitization value chain

Purpose: To understand the tensions that servitization activities create between actors within networks. Design/methodology/approach: Interviews were conducted with manufacturers, intermediaries and customers across a range of industrial sectors. Findings: Tensions relating to two key sets of capabilities are identified: in developing or acquiring (i) operant technical expertise and (ii) operand service infrastructure. The former tension concerns whom knowledge is co-created with and where expertise resides. The latter involves a territorial investment component; firms developing strategies to acquire greater access to, or ownership of, infrastructures closer to customers. Developing and acquiring these capabilities is a strategic decision on the part of managers of servitizing firms, in order to gain recognized power and control in a particular territory. Originality/value: This paper explores how firms’ servitization activities involve value appropriation (from the rest of the network), contrasting with the narrative norm for servitization: that it creates additional value. There is a need to understand the tensions that servitization activities create within networks. Some firms may be able to improve servitization performance through co-operation rather than competition, generating co-opetitive relationships. Others may need to become much more aggressive, if they are to take a greater share of the ‘value’ from the value chain.

Pre-existent expectancy effects in the relationship between caffeine and performance

The present study investigated the impact of pre-existent expectancy regarding the effects of the caffeine load of a drink and the perception of the caffeine content on subjective mood and vigilance performance. Caffeine deprived participants (N=25) were tested in four conditions (within subjects design), using a 2 × 2 design, with caffeine load and information regarding the caffeine content of the drink. In two sessions, they were given caffeinated coffee and in two were given decaffeinated coffee. Within these two conditions, on one occasion they were given accurate information about the drink and on the other they were given inaccurate information about the drink. Mood and vigilance performance were assessed post ingestion. Caffeine was found to enhance performance, but only when participants were accurately told they were receiving it. When decaffeinated coffee was given, performance was poorer, irrespective of expectancy. However, when caffeine was given, but participants were told it was decaffeinated coffee, performance was as poor as when no caffeine had been administered. There were no easily interpretable effects on mood. The pharmacological effects of caffeine appear to act synergistically with expectancy. © 2010.

Current knowledge on the role of the inferior frontal gyrus in Theory of Mind - a commentary on Schurz and Tholen (2016)

Schurz and Tholen (2016) argue that common approaches to studying the neural basis of “theory of mind” (ToM) obscure a potentially important role for inferior frontal gyrus (IFG) in managing conflict between perspectives, and urge new work to address this question: “to gain a full understanding of the IFG's role in ToM, we encourage future imaging studies to use a wider range of control conditions.” (p332). We wholeheartedly agree, but note that this observation has been made before, and has already led to a programme of work that provides evidence from fMRI, EEG, and TMS on the role of IFG in managing conflict between self and other perspectives in ToM. We highlight these works, and in particular we demonstrate how careful manipulation within ToM tasks has been used to act as an internal control condition, wherein conflict has been manipulated within-subject. We further add to the discussion by framing key questions that remain regarding IFG in the context of these. Using limitations in the existing research, we outline how best researchers can proceed with the challenge set by Schurz and Tholen (2016).

Apodised fibre Bragg grating design subject to length constraints

We investigate apodisation profiles of fibre Bragg gratings to determine key factors in filter design, using a novel apodisation technique. This highlights some practical fabrication limitations and provides important information concerning trade-offs between sidelobe suppression and bandwidth