New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

Approaches to issues of job regulation. A study at branch level in a white collar, public sector trade union. Available in 2 volumes.

This study examines the internal dynamics of white collar trade union branches in the public sector. The effects of a number of internal and external factors on branch patterns of action are evaluated. For the purposes of the study branch action is taken to be the approach to issues of job regulation, as expressed along the five dimensions of dependence on the outside trade union, focus in issues adopted, initiation of issues, intensity of action in issue pursuit and representativeness. The setting chosen for the study is four branches drawn from the same geographical area of the National and Local Government Officers Association. Branches were selected to give a variety in industry settings while controlling for the potentially influential variables of branch size, density of trade union membership and possession of exclusive representational rights in the employing organisation. Identical methods of data collection were used for each branch. The principal findings of the study are that the framework of national agreements and industry collective bargaining structures are strongly related to the industrial relations climate in the employing organisation and the structures of representation within the branch. Where agreements and collective bargaining structures formally restrict branch job regulation roles, there is a degree of devolution of bargaining authority from branch level negotiators to autonomous shop stewards at workplace level. In these circumstances industrial relations climate is characterised by a degree of informality in relationships between management and trade union activists. In turn, industrial relations climate and representative structures together with actor attitudes, have strong effects on all dimensions of approach to issues of job regulation.

State-of-the-art in lean design engineering:a literature review on white collar lean

Lean is usually associated with the ‘operations’ of a manufacturing enterprise; however, there is a growing awareness that these principles may be transferred readily to other functions and sectors. The application to knowledge-based activities such as engineering design is of particular relevance to UK plc. Hence, the purpose of this study has been to establish the state-of-the-art, in terms of the adoption of Lean in new product development, by carrying out a systematic review of the literature. The authors' findings confirm the view that Lean can be applied beneficially away from the factory; that an understanding and definition of value is key to success; that a set-based (or Toyota methodology) approach to design is favoured together with the strong leadership of a chief engineer; and that the successful implementation requires organization-wide changes to systems, practices, and behaviour. On this basis it is felt that this review paper provides a useful platform for further research in this topic.

Searching for lean white-collar workers

The purpose of this research has been to investigate the extent to which Lean techniques have been applied to indirect or White Collar activities within manufacturing operations. The work has been based on a systematic review of the literature and six UK based case studies. Both are described in the paper. The findings from this work include, for example, that there are few reports off the application of Lean in this context. The more substantive papers focus on NPI and Project Management, where as, Support and ‘Front Office’ activities are covered only briefly in ‘trade journal’ articles. These do demonstrate that Lean techniques can be applied successfully to non-production related activities, and there are significant opportunities for work in this area. However, the definition of Lean is evolving and practitioners do not share a common understanding of terminology. This may undermine their accuracy when reporting the application of Lean techniques.

Leisure at work in Britain, West Germany, France and Japan : a cross-cultural comparative study

The aim of this thesis was to investigate the impact of changing values and attitudes toward work and the workplace in Britain, West Germany, France and Japan. A cross-national approach was adopted in order to gain a better understanding of differences and similarities in behaviour and to identify aspects specific to each society. Although the relationship between work and leisure has been thoroughly examined and there is a growing body of literature on changes in the values associated with these two phenomena, little research has been carried out into leisure at work. Studies of work time have tended to consider it as a homogeneous block, whereas recent research suggests that more attention should be devoted to unravelling the multiple uses of time at the workplace. The present study sought to review and analyse this new approach to the study of work time, and special attention is devoted to an examination of definitions of leisure, recreation, free time and work within the context of the workplace. The cross-cultural comparative approach gave rise to several problems due to the number of countries involved and the unusual combination of factors being investigated. The main difficulties were differences in the amount and quality of literature available, the non-comparability of existing data, definitions of concepts and socio-linguistic terms, and problems over access to organizations for fieldwork. Much of the literature generalizes about patterns of behaviour and few authors isolate factors specific to particular societies. In this thesis new empirical work is therefore used to ascertain the extent to which generalizations can be made from the literature and characteristics peculiar to each of the four countries identified. White-collar employees in large, broadly comparable companies were studied using identical questionnaires in the appropriate language. Respondents selected were men and women, aged between 20-65 years and either managers or non-managers. Patterns of leisure at work were found to be broadly similar in the national contexts, but with the Japanese and the West Germans experiencing the least leisure at work, and the British and the French perceiving the most. The general trend seems to be toward convergence of attitudes regarding leisure at work in the four countries. Explanations for variations in practice were sought within the wider societal contexts of each country.

Trade union policy and new technology: the Civil and Public Services Association

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.

Outsourcing in Ireland:a literature review, survey and case study perspective

Outsourcing, or offshoring as it is now known, has been around for many decades. In the beginning it was only the very peripheral activities that were blue-collar (lower skilled) work outsourced, but this is now all changing with the outsourcing of white-collar jobs. Historically outsourcing was used when organisation could not perform to world-class excellence in all sectors of the organisation due to incompetence of staff and/or management, lack of capacity, financial pressures, and/or technological pressures. The research currently underway is initially focusing on a literature review of current outsourcing applications in the market place and what impact outsourcing has on business performance. This paper will present the findings of the initial literature review. It will also discuss the methodology being followed to explore the Irish Industrial Sector.

Outsourcing: a Theoretical Viewpoint

Outsourcing or offshoring as it is now known has been around for many decades. In the beginning, it was only very peripheral activities that were outsourced, i.e. blue-collar (lower skilled) work but this is now all changing with the outsourcing of white-collar jobs. The digital revolution, the falling costs of transport and telecom costs and the opening up of the global economy helped the outsourcing market. For companies going down or contemplating the road of outsourcing there are both potential benefits and challenges, for example, the type of outsourcing they want to get involved in, and the country they want to outsource to. Outsourcing can potentially happen anywhere in the world where the costs are lower and the quality higher. The main places that have been used for outsourcing have been India, China, Ireland, South-East Asia, Russia, Mexico and the Czech Republic. The research currently underway is initially focusing on a literature review of current outsourcing applications in the market place. From this literature review, a questionnaire is being developed to assess the impact Outsourcing has on businesses. This research focuses on the Irish Market place.