An exploratory study of the utilisation of the UK's Prudential Borrowing Framework

This article considers the utilisation of the UK’s Prudential Borrowing Framework (PBF) and the associated Prudential Code for local government capital finance. It finds that the increased flexibility and local freedom are at the cost of less financial certainty in terms of the risks borne by local authorities and local tax payers. The PBF seems to encourage a less formal approach to risk, being considered inevitable and handled if and when adverse risk outcomes occur. Consequently capital projects may lack affordability, sustainability and prudence. The Prudential Indicators required by the Code are not easily understood by non-specialists and their calculation cannot be used to replace sound judgement or to identify the best financing option.

Catalytic pyrolysis of agricultural residues for bio-oil production

Agricultural residues from Thailand, namely stalk and rhizome of cassava plants, were employed as raw materials for bio-oil production via fast pyrolysis technology. There were two main objectives of this project. The first one was to determine the optimum pyrolysis temperature for maximising the organics yield and to investigate the properties of the bio-oils produced. To achieve this objective, pyrolysis experiments were conducted using a bench-scale (150 g/h) reactor system, followed by bio-oil analysis. It was found that the reactor bed temperature that could give the highest organics yield for both materials was 490±15ºC. At all temperatures studied, the rhizome gave about 2-4% higher organics yields than the stalk. The bio-oil derived from the rhizome had lower oxygen content, higher calorific value and better stability, thus indicating better quality than that produced from the stalk. The second objective was to improve the bio-oil properties in terms of heating value, viscosity and storage stability by the incorporation of catalyst into the pyrolysis process. Catalytic pyrolysis was initially performed in a micro-scale reactor to screen a large number of catalysts. Subsequently, seven catalysts were selected for experiments with larger-scale (150 g/h) pyrolysis unit. The catalysts were zeolite and related materials (ZSM-5, Al-MCM-41 and Al-MSU-F), commercial catalysts (Criterion-534 and MI-575), copper chromite and ash. Additionally, the combination of two catalysts in series was investigated. These were Criterion-534/ZSM-5 and Al-MSU-F/ZSM-5. The results showed that all catalysts could improve the bio-oils properties as they enhanced cracking and deoxygenation reactions and in some cases such as ZSM-5, Criterion-534 and Criterion-534/ZSM-5, valuable chemicals like hydrocarbons and light phenols were produced. The highest concentration of these compounds was obtained with Criterion-534/ZSM-5.

The manufacture and utilisation of architectural terracotta and faience.

The revival of terracotta and faience in British architecture was widespread, dramatic in its results and, for two decades, the subject of intense debate. However the materials have been frequently denigrated and more generally disregarded by both architects and historians. This study sets out to record and explain the rise and fall of interest in terracotta and faience, the extent and nature of the industry and the range of architectural usage in the Victorian, Edwardian and inter-war periods. The first two chapters record the faltering use of terracotta as an 'artificial stone', until the material gained its own identity, largely through the appreciation of Italian architecture. In the mid-Victorian period, terracotta will be seen to have become symbolic of the philosophy of the Victoria and Albert Museum and its Art School in attempting to reform both architecture and the decorative arts. The adoption of terracotta was furthered as much by industrial as aesthetic factors; three chapters examine how the exploitation of coal-measure clays, developments in the processes of manufacture, the changing motivation of industrialists and differing economics of production served to promote and then to hinder expansion and adaptation. The practical values of economy, durability and fire-resistance and the aesthetic potential, seen in terms of colour and decorative and sculptural modelling, became inter-related in the work of the architects who made extensive use of architectural ceramics. A correlation emerges between the free Gothic style, exemplified by the designs of Alfred Waterhouse and the use of red terracotta supplied from Ruabon, and between the eclectic Renaissance style and a buff material produced by different manufacturers.These patterns were modified as a result of the adoption of faience for facing external walls as well as interiors, and because of the new architectural requirements and tastes of the twentieth century. The general timidity in exploiting the scope for polychromatic decoration and the increasing opposition to architectural ceramics is contrasted with the most successful schemes produced for cinemas, chain-stores and factories. In the last chapter, those undertaken by the Hathern Station Brick and Terracotta Company between 1896 and 1939 are used as a case study; they confirm that manufacturers, architects and clients were all committed to creating a modern and yet decorative architecture, appropriate for new building types and that would appeal to and be comprehensible to the public.

Utilisation of thermal annealing to record multiplexed FBG sensors in multimode microstructured polymer optical fibre

Fibre Bragg gratings have been UV inscribed in multimode microstructured polymer optical fibre in both the 1550nm and 800nm spectral regions. Thermally annealing the fibre at 80°C has been shown to shrink the fibre length and as a result a permanent negative Bragg wavelength shift is observed. The blue shift can be tuned between 0-16nm in the 1550nm spectral region and 0-6nm in the 800nm spectral region, depending on the duration the heat is applied before a saturation level is reached and the fibre stops shrinking in the region of 2 hours. Exploiting this, wavelength division multiplexed sensors have been UV inscribed in both the 1550nm and 800nm regions using a single phase mask for each wavelength region. The 800nm sensor takes advantage of the lower attenuation of poly (methyl methacrylate) of 2dB/m compared to 100dB/m at 1550nm.

Thermochemical characterisation of agricultural wastes from West Africa

Thermochemical characterisation of agricultural biomass wastes from West African region has been carried out and their potential use as feedstock in thermochemical conversion processes determined. Proximate, ultimate, structural compositions, calorific values, thermogravimetry (TGA) and derivative thermogravimetry (DTG) analyses were carried out on corn straw and cobs, rice straw and husks, cocoa pod, jatropha curcas and moringa olifiera seed cakes, parinari polyandra fruit shell and sugarcane bagasse. Moringa olifiera seed cakes and cocoa pods were found to contain the highest moisture contents. Rice straw was found to contain a high ash content of 45.76. wt.%. The level of nitrogen and sulphur in all the samples were very low. Rice husk was found to have the highest lignin contents while corn cob low lignin contents indicate a potential feedstock source for quality bio-oil production using thermochemical process. © 2013.

An optimum utilisation of plant and equipment with respect to maintenance

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Utilisation of analogous climate locations to produce resilient biodiversity plantings for infrastructure developments

Developers have an obligation to biodiversity when considering the impact their development may have on the environment, with some choosing to go beyond the legal requirement for planning consent. Climate change projections over the 21st century indicate a climate warming and thus the species selected for habitat creation need to be able to withstand the pressures associated with these forecasts. A process is therefore required to identify resilient plantings for sites subject to climate change. Local government ecologists were consulted on their views on the use of plants of non-native provenance or how they consider resilience to climate change as part of their planting recommendations. There are mixed attitudes towards non-native species, but with studies already showing the impact climate change is having on biodiversity, action needs to be taken to limit further biodiversity loss, particularly given the heavily fragmented landscape preventing natural migration. A methodology has been developed to provide planners and developers with recommendations for plant species that are currently adapted to the climate the UK will experience in the future. A climate matching technique, that employs a GIS, allows the identification of European locations that currently experience the predicted level of climate change at a given UK location. Once an appropriate location has been selected, the plant species present in this area are then investigated for suitability for planting in the UK. The methodology was trialled at one site, Eastern Quarry in Kent, and suitable climate matched locations included areas in north-western France. Through the acquisition of plant species data via site visits and online published material, a species list was created, which considered original habitat design, but with added resilience to climate change.

The application of uncertainty evaluating software for the utilisation of machine tool systems for final inspection

As machine tools continue to become increasingly repeatable and accurate, high-precision manufacturers may be tempted to consider how they might utilise machine tools as measurement systems. In this paper, we have explored this paradigm by attempting to repurpose state-of-the-art coordinate measuring machine Uncertainty Evaluating Software (UES) for a machine tool application. We performed live measurements on all the systems in question. Our findings have highlighted some gaps with UES when applied to machine tools, and we have attempted to identify the sources of variation which have led to discrepancies. Implications of this research include requirements to evolve the algorithms within the UES if it is to be adapted for on-machine measurement, improve the robustness of the input parameters, and most importantly, clarify expectations.

FOCUS : frailty management optimisation through EIPAHA commitments and utilisation of stakeholders’ input – an innovative European project in elderly care

The goal of FOCUS, which stands for Frailty Management Optimization through EIPAHA Commitments and Utilization of Stakeholders’ Input, is to reduce the burden of frailty in Europe. The partners are working on advancing knowledge of frailty detection, assessment, and management, including biological, clinical, cognitive and psychosocial markers, in order to change the paradigm of frailty care from acute intervention to prevention. FOCUS partners are working on ways to integrate the best available evidence from frailty-related screening tools, epidemiological and interventional studies into the care of frail people and their quality of life. Frail citizens in Italy, Poland and the UK and their caregivers are being called to express their views and their experiences with treatments and interventions aimed at improving quality of life. The FOCUS Consortium is developing pathways to leverage the knowledge available and to put it in the service of frail citizens. In order to reach out to the broadest audience possible, the FOCUS Platform for Knowledge Exchange and the platform for Scaling Up are being developed with the collaboration of stakeholders. The FOCUS project is a development of the work being done by the European Innovation Partnership on Active and Healthy Ageing (EIPAHA), which aims to increase the average healthy lifespan in Europe by 2020 while fostering sustainability of health/social care systems and innovation in Europe. The knowledge and tools developed by the FOCUS project, with input from stakeholders, will be deployed to all EIPAHA participants dealing with frail older citizens to support activities and optimize performance.

Strategies for agricultural change and the UK balance of payments

The world food crisis, Britain's reliance on imported food and feedstuffs and balance of payments difficulties were some of the factors which lent weight to the call for increased self-sufficiency in Britain's agriculture in the 1970s. This project considers two main areas: an investigation of the impact of radical agricultural change, designed to increase self-sufficiency, on the balance of payments; and, an appraisal of the potential role of the food industry within a radically different food system. The study proceeded by: an examination of the principles of agricultural policy and its development in Britain; an overview of the mechanism and meaning of the balance of payments; a consideration of the debate on agricultural import saving; the construction of radical agricultural strategies; the estimation of effects of the strategies, particularly to the balance of. payments; the role of the food industry and possible innovations within the strategies; a case study of textured vegetable proteins; and, the wider implications of implementation of radical agricultural alternatives. Two strategies were considered: a vegan system, involving no livestock; and, an intermediate system, including some livestock and dairy cattle. The study concludes that although agricultural change could in principle make a contribution to the balance of payments, implementation of agricultural change cannot be justified for this purpose alone. First, balance of payments problems can be solved by more appropriate methods. Second, the UK' s balance of payments problem has disappeared for the time being owing to North Sea oil and economic recession. Third, the political and social consequences of the changes investigated would be unacceptable. Progress in UK food policy is likely to be in the form of an integrated food and health policy.