6 resultados para United Service Organizations (U.S.)
em Aston University Research Archive
Resumo:
The majority of the literature about CBM is American in origin, and (inter alia) notes that there were differing uses of similar technology, indicating that context has an important role to play in the use of CBM. The literature maps the psychological effects of CBM in considerable detail, but only two published studies examine the context of CBM. These grounded results provide scant support for any systematic, quantitative, large scale analysis of computer based monitoring in the UK context. This thesis thus aims to systemically examine the context of CBM using discourse analysis. Forty four interviewees were theoretically sampled using a structured sample technique in four organizations. All were national or multinational enterprises. The interviews were semi structured in nature and divided into three sections. The first addressed the respondents' thoughts and perceptions about CBM, the second elicited talk about the departmental context (focusing the management - worker relationship), and the final section addressed the organizational context. The cases demonstrated variation in the use of CBM, measured according to the criteria of Westin (1987, 1988) and according to the interpretive repertoires used by the respondents in each case. Seven analytical categories of talk emerged from the data: three at the organizational level and four at the departmental level of analysis. Discourse analysis revealed two discrete interpretive repertories - the procedural and the substantive repertoires - in respondents' talk whose main variation occurred at the departmental level of analysis. Furthermore, patterns were found in the use of these repertories within cases and between categories. Between the cases, variation in the use of the repertories matched the between case variation according to the criteria of Westin. It would thus appear that the source of variation in the use of CBM lies in its context, more specifically in the relative emphasis of humanistic, interpersonal and idiosyncratic values within the management worker relationship.
Resumo:
People and their performance are key to an organization's effectiveness. This review describes an evidence-based framework of the links between some key organizational influences and staff performance, health and well-being. This preliminary framework integrates management and psychological approaches, with the aim of assisting future explanation, prediction and organizational change. Health care is taken as the focus of this review, as there are concerns internationally about health care effectiveness. The framework considers empirical evidence for links between the following organizational levels: 1. Context (organizational culture and inter-group relations; resources, including staffing; physical environment) 2. People management (HRM practices and strategies; job design, workload and teamwork; employee involvement and control over work; leadership and support) 3. Psychological consequences for employees (health and stress; satisfaction and commitment; knowledge, skills and motivation) 4. Employee behaviour (absenteeism and turnover; task and contextual performance; errors and near misses) 5. Organizational performance; patient care. This review contributes to an evidence base for policies and practices of people management and performance management. Its usefulness will depend on future empirical research, using appropriate research designs, sufficient study power and measures that are reliable and valid.
Resumo:
This study examined the impact of team-based working, team structure, and job design on employee well-being (in term of job satisfaction and work stress) in staff working in healthcare organizations in Hong Kong. Cross-cultural differences in the impact of job design, team structure, and employee well-being outcomes between United Kingdom and Hong Kong were also investigated. A group of 197 staff from two Hong Kong hospitals were compared to a sample of 270 UK staff working in National Health Service organizations in the UK. Results showed that team structure and job design were significantly associated with greater employee satisfaction and lower stress for Hong Kong healthcare staff. Culture was also found to moderate the impact of team structure and job design on employee well-being. The findings suggest that although team structure and job design contribute to employee well-being, they have differential impacts across cultures. This provides insights to policy planning on building team-based organizations in the healthcare sector involving multinational collaboration.
Resumo:
Productivity measurement poses a challenge for service organizations. Conventional management wisdom holds that this challenge is rooted in the difficulty of accurately quantifying service inputs and outputs. Few service firms have adequate service productivity measurement (SPM) systems in place and implementing such systems may involve organizational transformation. Combining field interviews and literature-based insights, the authors develop a conceptual model of antecedents of SPM in service firms and test it using data from 276 service firms. Results indicate that one out of five antecedents affects the choice to use SPM, namely, the degree of service standardization. In addition, all five hypothesized antecedents and one additional antecedent (perceived appropriateness of the current SPM) predict the degree of SPM usage. In particular, the degree of SPM is positively influenced by the degree of service standardization, service customization, investments in service productivity gains, and the appropriateness of current service productivity measures. In turn, customer integration and the perceived difficulty of measuring service productivity negatively affect SPM. The fact that customer integration impedes actual measurement of service productivity is a surprising finding, given that customer integration is widely seen as a means to increase service productivity. The authors conclude with implications for service organizations and directions for research.
Resumo:
In the area of international environmental law this thesis proposes the formulation of one-step planning and permitting regulation for the integrated utilisation of new surface mines as depositories for municipal solid waste. Additionally, the utilisation of abandoned and currently operated surface mines is proposed as solid waste landfills as an integral step in their reclamation. Existing laws, litigation and issues in the United Kingdom, the U.S. and Canada are discussed because of their common legal system, language and heritage. The critical shortage of approved space for disposal of solid waste has caused an urgent and growing problem for both the waste disposal industry and society. Surface mining can serve three important environmental and societal functions inuring to the health and welfare of the public: (1) providing basic minerals for goods and construction; (20 sequentially, to provide critically needed, safe burial sites for society's wastes, and (3) to conserve land by dual purpose use and to restore derelict land to beneficial surface use. Currently, the first two functions are treated environmentally, and in regulation, as two different siting problems, yet they both are earth-disturbing and excavating industries requiring surface restoration. The processes are largely duplicative and should be combined for better efficiency, less earth disturbance, conservation of land, and for fuller and better reclamation of completed surface mines returning the surfaces to greater utility than present mined land reclamation procedures. While both industries are viewed by a developed society and its communities as "bad neighbours", they remain essential and critical for mankind's existence and welfare. The study offers successful examples of the integrated process in each country. The study argues that most non-fuel surface mine openings, if not already safe, can economically, through present containment technology, be made environmentally safe for use as solid waste landfills. Simultaneously, the procedure safeguards and monitors protection of ground and surface waters from landfill contamination.
Resumo:
A view has emerged within manufacturing and service organizations that the operations management function can hold the key to achieving competitive edge. This has recently been emphasized by the demands for greater variety and higher quality which must be set against a background of increasing cost of resources. As nations' trade barriers are progressively lowered and removed, so producers of goods and service products are becoming more exposed to competition that may come from virtually anywhere around the world. To simply survive in this climate many organizations have found it necessary to improve their manufacturing or service delivery systems. To become real ''winners'' some have adopted a strategic approach to operations and completely reviewed and restructured their approach to production system design and operations planning and control. The articles in this issue of the International journal of Operations & Production Management have been selected to illustrate current thinking and practice in relation to this situation. They are all based on papers presented to the Sixth International Conference of the Operations Management Association-UK which was held at Aston University in June 1991. The theme of the conference was "Achieving Competitive Edge" and authors from 15 countries around the world contributed to more than 80 presented papers. Within this special issue five topic areas are addressed with two articles relating to each. The topics are: strategic management of operations; managing change; production system design; production control; and service operations. Under strategic management of operations De Toni, Filippini and Forza propose a conceptual model which considers the performance of an operating system as a source of competitive advantage through the ''operation value chain'' of design, purchasing, production and distribution. Their model is set within the context of the tendency towards globalization. New's article is somewhat in contrast to the more fashionable literature on operations strategy. It challenges the validity of the current idea of ''world-class manufacturing'' and, instead, urges a reconsideration of the view that strategic ''trade-offs'' are necessary to achieve a competitive edge. The importance of managing change has for some time been recognized within the field of organization studies but its relevance in operations management is now being realized. Berger considers the use of "organization design", ''sociotechnical systems'' and change strategies and contrasts these with the more recent idea of the ''dialogue perspective''. A tentative model is suggested to improve the analysis of different strategies in a situation specific context. Neely and Wilson look at an essential prerequisite if change is to be effected in an efficient way, namely product goal congruence. Using a case study as its basis, their article suggests a method of measuring goal congruence as a means of identifying the extent to which key performance criteria relating to quality, time, cost and flexibility are understood within an organization. The two articles on production systems design represent important contributions to the debate on flexible production organization and autonomous group working. Rosander uses the results from cases to test the applicability of ''flow groups'' as the optimal way of organizing batch production. Schuring also examines cases to determine the reasons behind the adoption of ''autonomous work groups'' in The Netherlands and Sweden. Both these contributions help to provide a greater understanding of the production philosophies which have emerged as alternatives to more conventional systems -------for intermittent and continuous production. The production control articles are both concerned with the concepts of ''push'' and ''pull'' which are the two broad approaches to material planning and control. Hirakawa, Hoshino and Katayama have developed a hybrid model, suitable for multistage manufacturing processes, which combines the benefits of both systems. They discuss the theoretical arguments in support of the system and illustrate its performance with numerical studies. Slack and Correa's concern is with the flexibility characteristics of push and pull material planning and control systems. They use the case of two plants using the different systems to compare their performance within a number of predefined flexibility types. The two final contributions on service operations are complementary. The article by Voss really relates to manufacturing but examines the application of service industry concepts within the UK manufacturing sector. His studies in a number of companies support the idea of the ''service factory'' and offer a new perspective for manufacturing. Harvey's contribution by contrast, is concerned with the application of operations management principles in the delivery of professional services. Using the case of social-service provision in Canada, it demonstrates how concepts such as ''just-in-time'' can be used to improve service performance. The ten articles in this special issue of the journal address a wide range of issues and situations. Their common aspect is that, together, they demonstrate the extent to which competitiveness can be improved via the application of operations management concepts and techniques.