Elementary units of cortical activity? The rise and fall of the cortical column

The roots of the concept of cortical columns stretch far back into the history of neuroscience. The impulse to compartmentalise the cortex into functional units can be seen at work in the phrenology of the beginning of the nineteenth century. At the beginning of the next century Korbinian Brodmann and several others published treatises on cortical architectonics. Later, in the middle of that century, Lorente de No writes of chains of ‘reverberatory’ neurons orthogonal to the pial surface of the cortex and called them ‘elementary units of cortical activity’. This is the first hint that a columnar organisation might exist. With the advent of microelectrode recording first Vernon Mountcastle (1957) and then David Hubel and Torsten Wiesel provided evidence consistent with the idea that columns might constitute units of physiological activity. This idea was backed up in the 1970s by clever histochemical techniques and culminated in Hubel and Wiesel’s well-known ‘ice-cube’ model of the cortex and Szentogathai’s brilliant iconography. The cortical column can thus be seen as the terminus ad quem of several great lines of neuroscientific research: currents originating in phrenology and passing through cytoarchitectonics; currents originating in neurocytology and passing through Lorente de No. Famously, Huxley noted the tragedy of a beautiful hypothesis destroyed by an ugly fact. Famously, too, human visual perception is orientated toward seeing edges and demarcations when, perhaps, they are not there. Recently the concept of cortical columns has come in for the same radical criticism that undermined the architectonics of the early part of the twentieth century. Does history repeat itself? This paper reviews this history and asks the question.

The interaction of fast neutrons with shielding and fusion blanket materials

In the present work the neutron emission spectra from a graphite cube, and from natural uranium, lithium fluoride, graphite, lead and steel slabs bombarded with 14.1 MeV neutrons were measured to test nuclear data and calculational methods for D - T fusion reactor neutronics. The neutron spectra measured were performed by an organic scintillator using a pulse shape discrimination technique based on a charge comparison method to reject the gamma rays counts. A computer programme was used to analyse the experimental data by the differentiation unfolding method. The 14.1 MeV neutron source was obtained from T(d,n)4He reaction by the bombardment of T - Ti target with a deuteron beam of energy 130 KeV. The total neutron yield was monitored by the associated particle method using a silicon surface barrier detector. The numerical calculations were performed using the one-dimensional discrete-ordinate neutron transport code ANISN with the ZZ-FEWG 1/ 31-1F cross section library. A computer programme based on Gaussian smoothing function was used to smooth the calculated data and to match the experimental data. There was general agreement between measured and calculated spectra for the range of materials studied. The ANISN calculations carried out with P3 - S8 calculations together with representation of the slab assemblies by a hollow sphere with no reflection at the internal boundary were adequate to model the experimental data and hence it appears that the cross section set is satisfactory and for the materials tested needs no modification in the range 14.1 MeV to 2 MeV. Also it would be possible to carry out a study on fusion reactor blankets, using cylindrical geometry and including a series of concentric cylindrical shells to represent the torus wall, possible neutron converter and breeder regions, and reflector and shielding regions.

Designing a safety management support system using open architecture databases: the requirements of information representation in the support of managers' risk-related decision-making

This research was conducted at the Space Research and Technology Centre o the European Space Agency at Noordvijk in the Netherlands. ESA is an international organisation that brings together a range of scientists, engineers and managers from 14 European member states. The motivation for the work was to enable decision-makers, in a culturally and technologically diverse organisation, to share information for the purpose of making decisions that are well informed about the risk-related aspects of the situations they seek to address. The research examined the use of decision support system DSS) technology to facilitate decision-making of this type. This involved identifying the technology available and its application to risk management. Decision-making is a complex activity that does not lend itself to exact measurement or precise understanding at a detailed level. In view of this, a prototype DSS was developed through which to understand the practical issues to be accommodated and to evaluate alternative approaches to supporting decision-making of this type. The problem of measuring the effect upon the quality of decisions has been approached through expert evaluation of the software developed. The practical orientation of this work was informed by a review of the relevant literature in decision-making, risk management, decision support and information technology. Communication and information technology unite the major the,es of this work. This allows correlation of the interests of the research with European public policy. The principles of communication were also considered in the topic of information visualisation - this emerging technology exploits flexible modes of human computer interaction (HCI) to improve the cognition of complex data. Risk management is itself an area characterised by complexity and risk visualisation is advocated for application in this field of endeavour. The thesis provides recommendations for future work in the fields of decision=making, DSS technology and risk management.

The Effect of low-grade aggregates on the abrasion resistance of concrete

Three types of crushed rock aggregate were appraised, these being Carboniferous Sandstone, Magnesian Limestone and Jurassic Limestone. A comprehensive aggregate testing programme assessed the properties of these materials. Two series of specimen slabs were cast and power finished using recognised site procedures to assess firstly the influence of these aggregates as the coarse fraction, and secondly as the fine fraction. Each specimen slab was tested at 28 days under three regimes to simulate 2-body abrasion, 3-body abrasion and the effect of water on the abrasion of concrete. The abrasion resistance was measured using a recognised accelerated abrasion testing apparatus employing rotating steel wheels. Relationships between the aggregate and concrete properties and the abrasion resistance have been developed with the following properties being particularly important - Los Angeles Abrasion and grading of the coarse aggregate, hardness of the fine aggregate and water-cement ratio of the concrete. The sole use of cube strength as a measure of abrasion resistance has been shown to be unreliable by this work. A graphical method for predicting the potential abrasion resistance of concrete using various aggregate and concrete properties has been proposed. The effect of varying the proportion of low-grade aggregate in the mix has also been investigated. Possible mechanisms involved during abrasion have been discussed, including localised crushing and failure of the aggregate/paste bond. Aggregates from each of the groups were found to satisfy current specifications for direct finished concrete floors. This work strengthens the case for the increased use of low-grade aggregates in the future.

Computer simulation of moist agglomerate collisions

This thesis considers the computer simulation of moist agglomerate collisions using the discrete element method (DEM). The study is confined to pendular state moist agglomerates, at which liquid is presented as either absorbed immobile films or pendular liquid bridges and the interparticle force is modelled as the adhesive contact force and interstitial liquid bridge force. Algorithms used to model the contact force due to surface adhesion, tangential friction and particle deformation have been derived by other researchers and are briefly described in the thesis. A theoretical study of the pendular liquid bridge force between spherical particles has been made and the algorithms for the modelling of the pendular liquid bridge force between spherical particles have been developed and incorporated into the Aston version of the DEM program TRUBAL. It has been found that, for static liquid bridges, the more explicit criterion for specifying the stable solution and critical separation is provided by the total free energy. The critical separation is given by the cube root of liquid bridge volume to a good approximation and the 'gorge method' of evaluation based on the toroidal approximation leads to errors in the calculated force of less than 10%. Three dimensional computer simulations of an agglomerate impacting orthogonally with a wall are reported. The results demonstrate the effectiveness of adding viscous binder to prevent attrition, a common practice in process engineering. Results of simulated agglomerate-agglomerate collisions show that, for colinear agglomerate impacts, there is an optimum velocity which results in a near spherical shape of the coalesced agglomerate and, hence, minimises attrition due to subsequent collisions. The relationship between the optimum impact velocity and the liquid viscosity and surface tension is illustrated. The effect of varying the angle of impact on the coalescence/attrition behaviour is also reported. (DX 187, 340).

Deformation microstructures and recrystallization in heavily worked copper

Deformation microstructures in two batches of commercially pure copper (A and B) of allnost similar composition have been studied after rolling reductions from 5% to 95%. X- ray diffraction, optical metallography, scanning electron microscopy in the back-scattered mode, transmission and scanning electron microscopy have been used to examine the deformation microstructure. At low strains (~10 %) the deformation is accommodated by uniform octahedral slip. Microbands that occur as sheet like features usually on the {111} slip planes are formed after 10% reduction. The misorientations between rnicrobonds ond the matrix are usually small (1 - 2° ) and the dislocations within the bands suggest that a single slip system has been operative. The number of microbands increases with strain, they start to cluster and rotate after 60% reduction and, after 90 %, they become almost perfectly aligned with the rolling direction. There were no detectable differences in deformation microstructure between the two materials up to a deformation level of 60% but subsequently, copper B started to develop shear bands which became very profuse by 90% reduction. By contrast, copper A at this stage of deformation developed a smooth laminated structure. This difference in the deformation microstructures has been attributed to traces of unknown impurity in D which inhibit recovery of work hardening. The preferred orientations of both were typical of deformed copper although the presence of shear bands was associated wth a slightly weaker texture. The effects of rolling temperature and grain size on deformation microstructure were also investigated. It was concluded that lowering the rolling temperature or increasing the initial grain size encourages the material to develop shear bands after heavy deformation. Recovery and recrystallization have been studied in both materials during annealing. During recrystallization the growth of new grains showed quite different characteristics in the two cases. Where shear bands were present these acted as nucleation sites and produced a wide spread of recrystallized grain orientations. The resulting annealing textures were very weak. In the absence of shear bands, nucleation occurs by a remarkably long range bulging process which creates the cube orientation and an intensely sharp annealing texture. Cube oriented regions occur in long bands of highly elongated and well recovered cells which contain long range cumulative micorientations. They are transition bands with structural characteristics ideally suited for nucleation of recrystallization. Shear banding inhibits the cube texture both by creating alternative nuclei and by destroying the microstructural features necessary for cube nucleation.

La presse d'extreme droite face au revisionnisme en France 1978-1990

Between 1978 and 1990 five newspapers close to Jean-Marie Le Pen's Front National had the choice of defining their stand on so-called révisionnisme which in its extreme form denied the existence of the Shoah, considering it to be the fabrication of a Jewish conspiracy. Within révisionnisme, a négationniste discourse affirmed that the gas chambers never existed, while a relativiste discourse denied that the Shoah was an act of genocide. However, most of the extreme-right newspapers did not adopt the cause of révisionnisme, even if they sometimes evinced an indulgence towards it. Only the weekly Rivarol and the militant François Brigneau who worked for Minute, Présent and National Hebdo and wrote the most on the subject openly espoused révisionnisme. The reasons for their stance included neo-fascist views, belief in a Jewish conspiracy. Their stance was in keeping with ideas commonly expressed in French neo-fascist circles that made for a révisionnisme of exculpation. On the other hand, the French Catholic intégriste milieu close to the Front National, which is represented by the newspapers Présent and Aspects de la France, was not generally révisionniste, notwithstanding the occasionnal expressions of relativisme by persons in the schismatic lefebvriste movement or close to Présent. This rejection of révisionnisme by Catholics on the extreme right was conditioned by various factors: the nature of Maurras's nationalisme intégral and anti-Semitism transmitted by I' Action française; the Catholic Church's modified position on the Jews; and the (offensive) atheism of the upholders of révisionnisme. This same révisionnisme extended beyond latter-day Nazi sympathisers. In its French version, it served to unite elements of the extreme right and the extreme left, as witness the role played by La Vieille Taupe, the extreme left group which was (and is) the leading publisher in France of tracts favouring révisionnisme.

Technical and economic study of plantain food products

Plantain (Banana-Musa AAB) is a widely growing but commercially underexploited tropical fruit. This study demonstrates the processing of plantain to flour and extends its use and convenience as a constituent of bread, cake and biscuit. Plantain was peeled, dried and milled to produce flour. Proximate analysis was carried out on the flour to determine the food composition. Drying at temperatures below 70ºC produced light coloured plantain flour. Experiments were carried out to determine the mechanism of drying, the heat and mass transfer coefficients, effect of air velocity, temperature and cube size on the rate of drying of plantain cubes. The drying was diffusion controlled. Pilot scale drying of plantain cubes in a cabinet dryer showed no significant increase of drying rate above 70ºC. In the temperature range found most suitable for plantain drying (ie 60 to 70ºC) the total drying time was adequately predicted using a modified equation based on Fick's Law provided the cube temperature was taken to be about 5ºC below the actual drying air temperature. Studies of baking properties of plantain flour revealed that plantain flour can be substituted for strong wheat flour up to 15% for bread making and up to 50% for madeira cake. A shortcake biscuit was produced using 100% plantain flour and test-marketed. Detailed economic studies showed that the production of plantain fruit and its processing into flour would be economically viable in Nigeria when the flour is sold at the wholesale price of NO.65 per kilogram provided a minimum sale of 25% plantain suckers. There is need for government subsidy if plantain flour is to compete with imported wheat flour. The broader economic benefits accruing from the processing of plantain fruit into flour and its use in bakery products include employment opportunity, savings in foreign exchange and stimulus to home agriculture.

An international round-robin calibration protocol for nanoindentation measurements

Nanoindentation has become a common technique for measuring the hardness and elastic-plastic properties of materials, including coatings and thin films. In recent years, different nanoindenter instruments have been commercialised and used for this purpose. Each instrument is equipped with its own analysis software for the derivation of the hardness and reduced Young's modulus from the raw data. These data are mostly analysed through the Oliver and Pharr method. In all cases, the calibration of compliance and area function is mandatory. The present work illustrates and describes a calibration procedure and an approach to raw data analysis carried out for six different nanoindentation instruments through several round-robin experiments. Three different indenters were used, Berkovich, cube corner, spherical, and three standardised reference samples were chosen, hard fused quartz, soft polycarbonate, and sapphire. It was clearly shown that the use of these common procedures consistently limited the hardness and reduced the Young's modulus data spread compared to the same measurements performed using instrument-specific procedures. The following recommendations for nanoindentation calibration must be followed: (a) use only sharp indenters, (b) set an upper cut-off value for the penetration depth below which measurements must be considered unreliable, (c) perform nanoindentation measurements with limited thermal drift, (d) ensure that the load-displacement curves are as smooth as possible, (e) perform stiffness measurements specific to each instrument/indenter couple, (f) use Fq and Sa as calibration reference samples for stiffness and area function determination, (g) use a function, rather than a single value, for the stiffness and (h) adopt a unique protocol and software for raw data analysis in order to limit the data spread related to the instruments (i.e. the level of drift or noise, defects of a given probe) and to make the H and E r data intercomparable. © 2011 Elsevier Ltd.

Orthodox Christianity and Nationalism:an introduction

On the morning of January 5, 1859, at the end of the liturgy in the Orthodox cathedral in Iaşi, the capital of the principality of Moldavia, Father Neofit Scriban addressed the congregation. He had given many sermons in the cathedral; however, on this par tic u lar date Father Neofit faced an unusual audience. Among the faithful who regularly worshipped at the relics of Saint Parascheva, the protector of Moldavia, were the members of the assembly who would decide the future of the principality. They had a specific mission: to elect a new prince, a key figure in their plan to unite Moldavia with the neighboring principality of Wallachia. Father Neofit, a supporter of the unionist cause and fully aware of the significance of the moment, stated: Brethren, Jesus Christ has said that "For where two or three have gathered together in My name, I am there in their midst." You, Brethren, are not two, or three, but a real gathering in the name of God. God is in your midst. You are here in the name of the Romanian nation [and] the Romanian nation is in your midst. On the flag under which you have assembled, the flag of the Romanian nation, great events, the Romanian faith, unity, are written in large letters. The church, which is founded on faith, blesses the flag of this faith⋯. You, Brethren, through the faith of the Romanian nation, by remaining faithful to this flag, will find the same strength as the church [finds] in its own saints. The faith of the Romanian nation was not, is not, and will not be anything else, but the unity of all Romanians in a single state, the only anchor of salvation, the only port in which the national boat could be saved from surrounding waves. You, Brethren, have gathered here in the church of Stephen the Great; looking at the altar that he raised to the God of your parents, I think that, through this [altar], you will be able to enter into the wishes of this hero of our nation. You, [remember that] by leaving this place, you are leaving [in order to fulfill] a great gesture that for many centuries has been lost for us; you are about to elect a successor to this great hero; therefore, as his true sons, you could not be anything other than the true expression of his wishes. Myself, [as] last year, from this altar, I said and I will continue to say that this great hero has told us that "the God of our parents will send us a Redeemer who will heal our wounds and accomplish our wishes." May your chosen leader today be the redeemer expected by the Romanian nation. May he heal its wounds and achieve its wishes. Therefore, Brethren, may your election today be that of a real Messiah of Romania. God and the world are looking at you, the church is blessing you and the whole Romanian nation is waiting for you!1 A few hours after Father Neofit's sermon, the assembly elected Alexandru Ioan Cuza to be the prince of the principality of Moldavia; a few days later, on January 24, 1859, the assembly of the neighboring principality of Wallachia decided that Cuza should also be their prince, thus confirming the unification of the two states. A new country was inscribed on the map of Southeastern Europe, titled "The United Principalities of Wallachia and Moldavia," also known as "The United Romanian Principalities".

3D simulation of the effects of sphericity on char entrainment in fluidised beds

The paper presents a 3-dimensional simulation of the effect of particle shape on char entrainment in a bubbling fluidised bed reactor. Three char particles of 350 μm side length but of different shapes (cube, sphere, and tetrahedron) are injected into the fluidised bed and the momentum transport from the fluidising gas and fluidised sand is modelled. Due to the fluidising conditions, reactor design and particle shape the char particles will either be entrained from the reactor or remain inside the bubbling bed. The sphericity of the particles is the factor that differentiates the particle motion inside the reactor and their efficient entrainment out of it. The simulation has been performed with a completely revised momentum transport model for bubble three-phase flow, taking into account the sphericity factors, and has been applied as an extension to the commercial finite volume code FLUENT 6.3. © 2010 Elsevier B.V.All rights reserved.