Japanese by design:an analysis of the UK automotive industry

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Better by design:nanoengineered macroporous hydrotalcites for enhanced catalytic biodiesel production

Templated, macroporous Mg-Al hydrotalcites synthesised via alkali-free co-precipitation exhibit superior performance in the transesterification of C4 -C18 triglycerides for biodiesel production, with rate-enhancement increasing with alkyl chain length. Promotion reflects improved diffusion of bulky triglycerides and accessibility of active sites within the hierarchical macropore-micropore architecture. © 2012 The Royal Society of Chemistry.

Edges and bars: where do people see features in 1-D images?

There have been two main approaches to feature detection in human and computer vision - based either on the luminance distribution and its spatial derivatives, or on the spatial distribution of local contrast energy. Thus, bars and edges might arise from peaks of luminance and luminance gradient respectively, or bars and edges might be found at peaks of local energy, where local phases are aligned across spatial frequency. This basic issue of definition is important because it guides more detailed models and interpretations of early vision. Which approach better describes the perceived positions of features in images? We used the class of 1-D images defined by Morrone and Burr in which the amplitude spectrum is that of a (partially blurred) square-wave and all Fourier components have a common phase. Observers used a cursor to mark where bars and edges were seen for different test phases (Experiment 1) or judged the spatial alignment of contours that had different phases (e.g. 0 degrees and 45 degrees ; Experiment 2). The feature positions defined by both tasks shifted systematically to the left or right according to the sign of the phase offset, increasing with the degree of blur. These shifts were well predicted by the location of luminance peaks (bars) and gradient peaks (edges), but not by energy peaks which (by design) predicted no shift at all. These results encourage models based on a Gaussian-derivative framework, but do not support the idea that human vision uses points of phase alignment to find local, first-order features. Nevertheless, we argue that both approaches are presently incomplete and a better understanding of early vision may combine insights from both. (C)2004 Elsevier Ltd. All rights reserved.

Cognitive systems associated with the hippocampus of the human brain and their role in behaviour and neurodegenerative disease

Cognitive systems research involves the synthesis of ideas from natural and artificial systems in the analysis, understanding, and design of all intelligent systems. This chapter discusses the cognitive systems associated with the hippocampus (HC) of the human brain and their possible role in behaviour and neurodegenerative disease. The hippocampus (HC) is concerned with the analysis of highly abstract data derived from all sensory systems but its specific role remains controversial. Hence, there have been three major theories concerning its function, viz., the memory theory, the spatial theory, and the behavioral inhibition theory. The memory theory has its origin in the surgical destruction of the HC, which results in severe anterograde and partial retrograde amnesia. The spatial theory has its origin in the observation that neurons in the HC of animals show activity related to their location within the environment. By contrast, the behavioral inhibition theory suggests that the HC acts as a ‘comparator’, i.e., it compares current sensory events with expected or predicted events. If a set of expectations continues to be verified then no alteration of behavior occurs. If, however, a ‘mismatch’ is detected then the HC intervenes by initiating appropriate action by active inhibition of current motor programs and initiation of new data gathering. Understanding the cognitive systems of the hippocampus in humans may aid in the design of intelligent systems involved in spatial mapping, memory, and decision making. In addition, this information may lead to a greater understanding of the course of clinical dementia in the various neurodegenerative diseases in which there is significant damage to the HC.

The influence of face and group orientation on the perception of luxury goods:a four market study of East Asian consumers

Purpose: The paper aims to further extend our understanding by assessing the extent to which two prominent cultural values in East Asia i.e. face saving and group orientation drive consumers' perceptions of luxury goods across four East Asian markets. Design/methodology/approach: A multi-methods research approach was adopted consisting of: an expert panel of close to 70 participants, group discussions with five extended East Asian families, personal interviews with eight East Asian scholars, a pilot test with over 50 East Asian graduate students and a multi-market survey of 443 consumer respondents in Beijing, Tokyo, Singapore and Hanoi. Findings: The authors extend previous conceptual studies by empirically investigating the impact of these two cultural values on the perception of luxury among East Asian societies. Specifically the study reveals that across all four markets face saving has the strongest influence on the conspicuous and hedonistic dimensions of luxury, group orientation meanwhile is the strongest predictor of the quality, extended self and exclusivity dimensions of luxury. Collectively these two cultural values significantly influence East Asian perceptions of luxury. Overall, the findings reiterate the importance of understanding different cultural values and their influence across different East Asian societies. Practical implications: The findings have important implications for managers of western luxury branded goods that are seeking to penetrate East Asian markets or seek to serve East Asian consumers. Specifically, to assist with developing suitable brand positioning, products, services, communications and pricing strategies. Originality/value: This study contributes to our understanding of the subject by exploring the impact of face saving and group orientation on the perception of luxury goods across four East Asian countries. Several directions for future research are suggested. © Emerald Group Publishing Limited.

Design of experiments to study the impact of process parameters on droplet size and development of non-invasive imaging techniques in tablet coating

Atomisation of an aqueous solution for tablet film coating is a complex process with multiple factors determining droplet formation and properties. The importance of droplet size for an efficient process and a high quality final product has been noted in the literature, with smaller droplets reported to produce smoother, more homogenous coatings whilst simultaneously avoiding the risk of damage through over-wetting of the tablet core. In this work the effect of droplet size on tablet film coat characteristics was investigated using X-ray microcomputed tomography (XμCT) and confocal laser scanning microscopy (CLSM). A quality by design approach utilising design of experiments (DOE) was used to optimise the conditions necessary for production of droplets at a small (20 μm) and large (70 μm) droplet size. Droplet size distribution was measured using real-time laser diffraction and the volume median diameter taken as a response. DOE yielded information on the relationship three critical process parameters: pump rate, atomisation pressure and coating-polymer concentration, had upon droplet size. The model generated was robust, scoring highly for model fit (R2 = 0.977), predictability (Q2 = 0.837), validity and reproducibility. Modelling confirmed that all parameters had either a linear or quadratic effect on droplet size and revealed an interaction between pump rate and atomisation pressure. Fluidised bed coating of tablet cores was performed with either small or large droplets followed by CLSM and XμCT imaging. Addition of commonly used contrast materials to the coating solution improved visualisation of the coating by XμCT, showing the coat as a discrete section of the overall tablet. Imaging provided qualitative and quantitative evidence revealing that smaller droplets formed thinner, more uniform and less porous film coats.

Management processes in marketing planning

There has been concern in the literature about the adequacy of the traditional model of marketing planning, which focuses on what decisions should be made and not on how to make them. The aim of this article is a new conceptualisation that proposes key management processes about how marketing planning decisions are made in a dynamic context. The motives for this conceptualisation are to contribute to understanding by advancing the traditional model of marketing planning, to stimulate academic and practitioner debate about how marketing planning decisions are made, and to initiate new directions in marketing planning research. Two new competing models of marketing planning are developed, which address key management processes about how marketing planning decisions are made in a dynamic context, and research directions are proposed.

The essentials of teamworking:international perspectives

The team, rather than the individual, is increasingly seen as the building block of organizations and a key source of competitive advantage. Despite this, not enough is understood about how to build successful teams in modern organizations. The Essentials of Teamworking broadens this understanding by offering a selection of key chapters on teamwork from the International Handbook of Organizational Teamwork and Cooperative Working. This concise paperback edition reveals the complexity of teamwork and offers empirically based guidance on how teamwork can be effectively developed in modern organizations. Bringing together leading international scholars, The Essentials of Teamworking offers challenging perspectives on teamwork that will inform future research and practice. It is an invaluable resource for professionals, researchers and students alike.

Bars and edges: what makes a feature for human vision?

There have been two main approaches to feature detection in human and computer vision - luminance-based and energy-based. Bars and edges might arise from peaks of luminance and luminance gradient respectively, or bars and edges might be found at peaks of local energy, where local phases are aligned across spatial frequency. This basic issue of definition is important because it guides more detailed models and interpretations of early vision. Which approach better describes the perceived positions of elements in a 3-element contour-alignment task? We used the class of 1-D images defined by Morrone and Burr in which the amplitude spectrum is that of a (partially blurred) square wave and Fourier components in a given image have a common phase. Observers judged whether the centre element (eg ±458 phase) was to the left or right of the flanking pair (eg 0º phase). Lateral offset of the centre element was varied to find the point of subjective alignment from the fitted psychometric function. This point shifted systematically to the left or right according to the sign of the centre phase, increasing with the degree of blur. These shifts were well predicted by the location of luminance peaks and other derivative-based features, but not by energy peaks which (by design) predicted no shift at all. These results on contour alignment agree well with earlier ones from a more explicit feature-marking task, and strongly suggest that human vision does not use local energy peaks to locate basic first-order features. [Supported by the Wellcome Trust (ref: 056093)]

Technology flows, outsourcing and productivity:an analysis of UK trade and FDI

By engaging in trade and foreign direct investment (FDI) with foreign partners, a country can access the R&D and related knowledge stocks of other countries (by accident or by design) and so benefit from those stocks of knowledge at a cost lower than that which would be incurred by developing the knowledge internally. This should lead to beneficial ‘spillover’ effects on the productivity of domestic firms. However, the literature on technology spillovers from trade and FDI is ambiguous in its findings. This may in part be because of the assumption in much of the work that trade and FDI flows are homogeneous in their determinants and thus in their effects. We develop a taxonomy of trade and FDI determinants based on R&D intensity and unit labour cost differentials, and test for the presence of spillovers from inward investment and imports on an extensive sample of UK manufacturing plants. We find that both trade and FDI have measurable spillover effects, but the size of these effects varies depending on the technological and labour cost differentials between the UK and its trading partners. There is therefore an identifiable link between the determinants and effects of trade and FDI which the previous literature has not explored. We also find that absorptive capacity matters for spillovers from FDI, but not from trade. Overall, these findings suggest that the productivity effects of FDI are largely restricted to plants with high absorptive capacity, while the productivity effects of imports occur largely among higher-technology plants regardless of their absorptive capacity.

The continuing relevance of Germany's engine for CEE andthe EU

The article looks first into the nature of the relations between Germany and the CEE countries a decade since the accession of the CEE countries to the EU. The relations are characterized as normalised and intensive with diverse levels of closeness and co-operation reflecting of the conceptual and ideological compatibility/differences. Next, the article focuses on the German attitude to the euro zone crisis. Germany has become a hegemon in the rescue effort aimed at stabilisation and economic invigoration of the euro zone. However, German hegemony has developed by default, not by design: her leading position is linked with considerable political and financial costs. Germany moved central stage and took the position of a reluctant hegemon. However, German role is contested internationally (it has not the support of the French government in key areas) as well as internally (particularly by the Federal Constitutional Court and the Bundesbank).The article argues that the new situation makes the German-CEE relations increasingly relevant for both sides. The German leadership of the EU increasing split along the north-south divide requires backing by the Northern group countries to which the CEE in general belongs. Given a number of reasons the CEE countries implement three distinctive strategies of co-operation with Germany in European politics. Also military co-operation, which remained rather limited so far, may receive new impulses, given the financial austerity. © 2013 The Regents of the University of California.

Large-scale production of secreted proteins in Pichia pastoris

The production of recombinant therapeutic proteins is an active area of research in drug development. These bio-therapeutic drugs target nearly 150 disease states and promise to bring better treatments to patients. However, if new bio-therapeutics are to be made more accessible and affordable, improvements in production performance and optimization of processes are necessary. A major challenge lies in controlling the effect of process conditions on production of intact functional proteins. To achieve this, improved tools are needed for bio-processing. For example, implementation of process modeling and high-throughput technologies can be used to achieve quality by design, leading to improvements in productivity. Commercially, the most sought after targets are secreted proteins due to the ease of handling in downstream procedures. This chapter outlines different approaches for production and optimization of secreted proteins in the host Pichia pastoris. © 2012 Springer Science+business Media, LLC.

Sensemaking tools for understanding research literatures:design, implementation and user evaluation

This paper describes the work undertaken in the Scholarly Ontologies Project. The aim of the project has been to develop a computational approach to support scholarly sensemaking, through interpretation and argumentation, enabling researchers to make claims: to describe and debate their view of a document's key contributions and relationships to the literature. The project has investigated the technicalities and practicalities of capturing conceptual relations, within and between conventional documents in terms of abstract ontological structures. In this way, we have developed a new kind of index to distributed digital library systems. This paper reports a case study undertaken to test the sensemaking tools developed by the Scholarly Ontologies project. The tools used were ClaiMapper, which allows the user to sketch argument maps of individual papers and their connections, ClaiMaker, a server on which such models can be stored and saved, which provides interpretative services to assist the querying of argument maps across multiple papers and ClaimFinder, a novice interface to the search services in ClaiMaker.

Toward understanding inter-organizational knowledge transfer needs in SMEs:insight from a UK investigation

Purpose - External knowledge is generally believed to be of prime importance to small to medium-sized enterprises (SMEs). However, a review of the literature shows that no empirical research has looked at knowledge management issues at the inter-organizational level in SMEs. This paper seeks to report on an empirical investigation with UK SMEs in the service sector to identify their needs and practices regarding inter-organizational knowledge transfer, and thus provide empirical evidence to support the above belief. Design/methodology/approach - A two-tier methodology (i.e. using both questionnaire survey and interview approaches) is deployed to address the main research objectives. A questionnaire survey of SMEs is carried out to investigate their current inter-organizational knowledge transfer situation and managers' perception on various relevant issues. Then 12 face-to-face interviews with SME managers are conducted to further validate key findings drawn from the questionnaire survey. Findings - The empirical evidence collected from the survey and interviews confirms the general belief that external knowledge is of prime importance for SMEs, and demonstrates that SMEs have very strong needs for external knowledge and inter-organizational knowledge transfer. Research limitations/implications - The findings provide very strong underpinning for further theoretical research on inter-organizational knowledge transfer in SMEs. However, this study has certain limitations: its results may not be applicable to other industrial sectors or the same sector in other countries; or to micro or large companies; nor does it involve cross-cultural issues. Originality/value - By adopting a two-tier research methodology, this study provides more reliable understanding and knowledge on SMEs' inter-organizational knowledge transfer needs and practices, and fills the gap that exists in the empirical investigations on the subject. © Emerald Group Publishing Limited.

Structure and dynamics of multiple cationic vectors-siRNA complexation by all-atomic molecular dynamics simulations

Understanding the molecular mechanism of gene condensation is a key component to rationalizing gene delivery phenomena, including functional properties such as the stability of the gene-vector complex and the intracellular release of the gene. In this work, we adopt an atomistic molecular dynamics simulation approach to study the complexation of short strand duplex RNA with four cationic carrier systems of varying charge and surface topology at different charge ratios. At lower charge ratios, polymers bind quite effectively to siRNA, while at high charge ratios, the complexes are saturated and there are free polymers that are unable to associate with RNA. We also observed reduced fluctuations in RNA structures when complexed with multiple polymers in solution as compared to both free siRNA in water and the single polymer complexes. These novel simulations provide a much better understanding of key mechanistic aspects of gene-polycation complexation and thereby advance progress toward rational design of nonviral gene delivery systems.