Purchasing green transport and logistics services:implications from the environmental sustainability attitude of 3PLs

Environmental sustainability is an area of increasing importance for third party logistics (3PL) companies. As the design and implementation of services requires interaction between buyer and 3PL, the 3PLs are in a critical position to support the efforts towards greening operations of different supply chain participants. However the literature in this field reflects a gap between the perspectives of buyers and 3PLs. This chapter attempts to fill this void through an explorative case study analysis on the environmental attitude of 3PLs in order to derive implications for buyers’ behavior. The results indicate that the buyer’s role is critical in different ways in the development of green initiatives among 3PLs. An increased orientation towards longer-term contracts and joint development would likely enhance the level of green initiatives. Indirectly, the buyer has the opportunity to influence its 3PLs through interaction with employees on different levels in the company, including top management.

Purchasing green transport and logistics services:implications for small business

Considering its strong environmental impact, logistics plays a critical role in green supply chain management. It provides strategic links in the supply chain and is an essential function in the delivery of green products to the consumer. There is a general consensus on the fact that more environmentally sustainable companies may be achieved only if transport and logistics activities also become greener. To achieve this objective, buyer companies need to incorporate green considerations in the purchasing of transport and logistics services. This appears particularly challenging for small and medium sized enterprises (SMEs) because of their traditional lack of managerial, organisational and financial resources that often result in failure to adopt an environmental perspective. In the extant literature, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. However, little has been written in relation to purchasing green transport and logistics services. The aim of this paper is to explore practices in the buying of green transport and logistics services and to derive implications for small buyer companies. The paper analyses how general environmental company ambitions and environmental purchasing practices are reflected when green transport and logistics services are purchased in three different European countries (Italy, Ireland and Sweden) using a multiple case study research approach. The results of the paper indicate that while the case companies show a relatively high concern for green issues at corporate level, a lower importance is attributed to green issues at the purchasing function level. When green concerns in the purchasing of transport and logistics services are analysed the level of importance decreases further. Thus, a conflicting attitude is evident between the overall corporate level and the purchasing of transport and logistics services specifically. This suggests that there is potential for improvement especially in the area of green collaboration in buyer and supplier relationships.

NITL : what the transport and logistics industry needs going forward

The transport industry - particularly in road transport - is under serious competitive pressure. Rising costs - evident but not limited to fuel and insurance - combined with a market place that has become more demanding in relation to price and service, has resulted in a situation where companies have had to seriously reassess the nature of their competitive advantage. The competitive strategies of companies in the sector are being reviewed in light of the effective commoditisation of transport as a direct result of the traditional strong emphasis on cost and price reductions.

Purchasing green transport and logistics services:implications from the environmental sustainability attitude of 3PLs

Environmental sustainability is an area of increasing importance for third party logistics (3PL) companies. As the design and implementation of services requires interaction between buyer and 3PL, the 3PLs are in a critical position to support the efforts towards greening operations of different supply chain participants. However the literature in this field reflects a gap between the perspectives of buyers and 3PLs. This chapter attempts to fill this void through an explorative case study analysis on the environmental attitude of 3PLs in order to derive implications for buyers’ behavior. The results indicate that the buyer’s role is critical in different ways in the development of green initiatives among 3PLs. An increased orientation towards longer-term contracts and joint development would likely enhance the level of green initiatives. Indirectly, the buyer has the opportunity to influence its 3PLs through interaction with employees on different levels in the company, including top management.

Comparing transport emissions and impacts for energy recovery from domestic waste (EfW): centralised and distributed disposal options for two UK Counties

Many local authorities (LAs) are currently working to reduce both greenhouse gas emissions and the amount of municipal solid waste (MSW) sent to landfill. The recovery of energy from waste (EfW) can assist in meeting both of these objectives. The choice of an EfW policy combines spatial and non-spatial decisions which may be handled using Multi-Criteria Analysis (MCA) and Geographic Information Systems (GIS). This paper addresses the impact of transporting MSW to EfW facilities, analysed as part of a larger decision support system designed to make an overall policy assessment of centralised (large-scale) and distributed (local-scale) approaches. Custom-written ArcMap extensions are used to compare centralised versus distributed approaches, using shortest-path routing based on expected road speed. Results are intersected with 1-kilometre grids and census geographies for meaningful maps of cumulative impact. Case studies are described for two counties in the United Kingdom (UK); Cornwall and Warwickshire. For both case study areas, centralised scenarios generate more traffic, fuel costs and emitted carbon per tonne of MSW processed.

Strategic development of transport systems: a study of the physical constraints on planning processes

Investment in transport infrastructure can be highly sensitive to uncertainty. The scale and lead time of strategic transport programmes are such that they require continuing policy support and accurate forecasting. Delay, cost escalation and abandonment of projects often result if these conditions are not present. In Part One the physical characteristics of infrastructure are identified as a major constraint on planning processes. The extent to which strategies and techniques acknowledge these constraints is examined. A simple simulation model is developed to evaluate the effects on system development of variations in the scale and lead time of investments. In Part Two, two case studies of strategic infrastructure investment are analysed. The absence of a policy consensus for airport location was an important factor in the delayed resolution of the Third London Airport issue. In London itself, the traffic and environmental effects of major highway investment ultimately resulted in the abandonment of plans to construct urban motorways. In both cases, the infrastructure implications of alternative strategies are reviewed with reference to the problems of uncertainty. In conclusion, the scale of infrastructure investment is considered the most important of the constraints on the processes of transport planning. Adequate appraisal of such constraints may best be achieved by evaluation more closely aligned to policy objectives.

Polyol transport in yeast: studying transport proteins and manipulating osmotic responses

The Saccharomyces cerevisiae MIP channel Fps1p plays an important role in yeast osmoregulation by exporting glycerol. Glycerol accumulates in the cell as a compatible osmolyte during hyperosmotic conditions and is exported once conditions become hypotonic. A gpd1 gpd2 mutant is unable to produce glycerol and is therefore very sensitive to high concentrations of polyols in the growth medium. The sensitivity to C3, C4 and C5, but not C6 polyols, is suppressed by expression of truncated, hyperactive Fps1p. This is because the polyols can then equilibrate over the membrane and hence the concentration gradient collapses. This experiments reveals the substrate spectrum of Fps1p. The system can be used in different ways. For instance, growth assays on different polyols elucidate the substrate range of heterologous channels such as that of the rat aquaglyceroporin AQP9. In addition, the same system is used to search for novel hyperactive mutants of Fps1p, which provide additional information on the mechanism underlying channel regulation. Finally we illustrate that the gpd1 gpd2 double mutant expressing hyperactive Fps1p can be used to manipulate activation and deactivation of the HOG pathway, contributing to our understanding of the control of this osmoregulatory system.

Human resource management systems and organizational performance:a test of a mediating model in the Greek manufacturing context

This paper investigates the relationship between systems of HRM policies and organizational performance. The research is based on a sample of 178 organizations operating in the Greek manufacturing sector. A mediation model is tested to examine the link between HRM and organizational performance. The results of this study support the hypothesis that the relationship between the HRM systems of resourcing-development and reward-relations, and organizational performance, is mediated through the HRM outcomes of skills and attitudes. The paper not only supports the theory that HRM systems have a positive impact on organizational performance but also explains the mechanisms through which HRM systems improve organizational performance.

Production and operations managers and logistics managers: a cross-country comparison

Purpose – The purpose of this paper is to explore the contribution of production and operations managers (POMs) and logistics managers (LMs) in improving manufacturing and service operations, comparing experiences in Australia and Britain. Design/methodology/approach – The findings are based on surveys of the two occupations in the two countries. Thus, the focus is on comparing and contrasting two strategically placed occupations within the supply chain and in two traditional manufacturing economies in developed countries, in opposing hemispheres of the world. Findings – The working lives of 254 Australian and 195 British POMs and 303 Australian and 168 British LMs are explored to see how well prepared they are for the business challenges of today, whether they see the need for changes in the ways in which they work and what satisfactions they derive from their worlds of work? Practical implications – Insights are provided for senior management into the deployment and personal and professional development needs of two key occupations within supply chain management. Originality/value – The findings from the research give fresh insights into the ways in which managers in the two areas of responsibilities in the two countries.view their worlds of work.

Local industrial systems and the location of FDI in Italy

This article investigates the determinants of foreign direct investment (FDI)location across Italian provinces. Specifically it examines the relationship between industry- specific local industrial systems and the location of inward FDI. This extends previous analysis beyond the mere density of activity, to illustrate the importance of the specific nature of agglomerations in attracting inward investment. The article develops a model of FDI location choice using a unique FDI database stratified by industry and province. The results also suggest that the importance of agglomeration differs between industries, and offers some explanation for this.

Casemix accounting systems and medical coding:organisational actors balanced on "leaky black boxes"

The adoption of DRG coding may be seen as a central feature of the mechanisms of the health reforms in New Zealand. This paper presents a story of the use of DRG coding by describing the experience of one major health provider. The conventional literature portrays casemix accounting and medical coding systems as rational techniques for the collection and provision of information for management and contracting decisions/negotiations. Presents a different perspective on the implications and effects of the adoption of DRG technology, in particular the part played by DRG coding technology as a part of a casemix system is explicated from an actor network theory perspective. Medical coding and the DRG methodology will be argued to represent ``black boxes''. Such technological ``knowledge objects'' provide strong points in the networks which are so important to the processes of change in contemporary organisations.

Interplay between the charge transport phenomena and the charge-transfer phase transition in RbxMn[Fe(CN)6]y.zH2O

Charge transport and dielectric measurements were carried out on compacted powder and single-crystal samples of bistable RbxMn[Fe(CN)6]y·zH2O in the two valence-tautomeric forms (MnIIFeIII and MnIIIFeII) as a function of temperature (120-350 K) and frequency (10-2-106 Hz). The complex conductivity data reveal universal conductivity behavior and obey the Barton-Nakajima-Namikawa relationship. The charge transport is accompanied by dielectric relaxation that displays the same thermal activation energy as the conductivity. Surprisingly, the activation energy of the conductivity was found very similar in the two valence-tautomeric forms (0.55 eV), and the conductivity change between the two phases is governed mainly by the variation of the preexponential factor in each sample. The phase transition is accompanied by a large thermal hysteresis of the conductivity and the dielectric constant. In the hysteresis region, however, a crossover occurs in the charge transport mechanism at T < 220 K from an Arrhenius-type to a varying activation energy behavior, conferring an unusual “double-loop” shape to the hysteresis.