Developments in contact lens measurement:a comparative study of industry standard geometric inspection and optical coherence tomography

Purpose: The aim of this study was to compare a developmental optical coherence tomography (OCT) based contact lens inspection instrument to a widely used geometric inspection instrument (Optimec JCF), to establish the capability of a market focused OCT system. Methods: Measurements of 27 soft spherical contact lenses were made using the Optimec JCF and a new OCT based instrument, the Optimec is830. Twelve of the lenses analysed were specially commissioned from a traditional hydrogel (Contamac GM Advance 49%) and 12 from a silicone hydrogel (Contamac Definitive 65), each set with a range of back optic zone radius (BOZR) and centre thickness (CT) values. Three commercial lenses were also measured; CooperVision MyDay (Stenfilcon A) in −10D, −3D and +6D powers. Two measurements of BOZR, CT and total diameter were made for each lens in temperature controlled saline on both instruments. Results: The results showed that the is830 and JCF measurements were comparable, but that the is830 had a better repeatability coefficient for BOZR (0.065 mm compared to 0.151 mm) and CT (0.008 mm compared to 0.027 mm). Both instruments had similar results for total diameter (0.041 mm compared to 0.044 mm). Conclusions: The OCT based instrument assessed in this study is able to match and improve on the JCF instrument for the measurement of total diameter, back optic zone radius and centre thickness for soft contact lenses in temperature controlled saline.

Business strategy and the environment in a traditional manufacturing sector

This research is concerned with the relationship between business strategy and the environment within traditional sectors. It has sought to learn more about the strategic environmental attitudes of SMEs compared with large companies operating under the same market conditions. The sector studied is the ceramics industry (including tableware & ornamental-ware, sanitary ware & tiles, bricks, industrial & advanced ceramics and refractories) in the UK and France. Unlike the automotive, oil, chemical, steel or metal processing sectors, this industry is one of the few industrial sectors which has rarely been considered. The information on this sector was gathered by interviewing people responsible for environmental issues. The actual programme of valid interviews represents approximately a quarter of the UK and French ceramics industry which is large enough to enable a quantitative analysis and significant and non-biased conclusions. As a whole, all companies surveyed agreed that the ceramics activity impacts on the environment, and that they are increasingly affected both by environmental legislation, and by various non-legislative pressures. Approaches to the environmental agenda differ significantly among large and small companies. Smaller companies feel particularly pressed both by the financial costs and management time required to meet complex and changing legislation. The results of this survey also suggest that the ceramics industry sees environmental issues in terms of increased costs rather than new business opportunities. This is due principally to fears of import substitution from countries with lower environmental standards. Finally, replies indicate that generally there is a low level of awareness of the current legislative framework, suggesting a need to shift from a regulatory approach to a more self-regulated approach which encourages companies to be more proactive

Productivity change in the water industry in England and Wales:application of the meta-Malmquist Index

This paper uses a meta-Malmquist index for measuring productivity change of the water industry in England and Wales and compares this to the traditional Malmquist index. The meta-Malmquist index computes productivity change with reference to a meta-frontier, it is computationally simpler and it is circular. The analysis covers all 22 UK water companies in existence in 2007, using data over the period 1993–2007. We focus on operating expenditure in line with assessments in this field, which treat operating and capital expenditure as lacking substitutability. We find important improvements in productivity between 1993 and 2005, most of which were due to frontier shifts rather than catch up to the frontier by companies. After 2005, the productivity shows a declining trend. We further use the meta-Malmquist index to compare the productivities of companies at the same and at different points in time. This shows some interesting results relating to the productivity of each company relative to that of other companies over time, and also how the performance of each company relative to itself over 1993–2007 has evolved. The paper is grounded in the broad theory of methods for measuring productivity change, and more specifically on the use of circular Malmquist indices for that purpose. In this context, the contribution of the paper is methodological and applied. From the methodology perspective, the paper demonstrates the use of circular meta-Malmquist indices in a comparative context not only across companies but also within company across time. This type of within-company assessment using Malmquist indices has not been applied extensively and to the authors’ knowledge not to the UK water industry. From the application perspective, the paper throws light on the performance of UK water companies and assesses the potential impact of regulation on their performance. In this context, it updates the relevant literature using more recent data.

The impact of the post-1993 economic reforms on Chinese state-owned enterprises:evidence from the electronics industry

Since 1979, China has embarked on a series of economic reform programmes, leading its socialist economy away from a Soviet planning model towards a much greater reliance on the market. In the course of the last twenty years, the Chinese economy has enjoyed a phenomenally high economic growth rate. However, earlier research suggests that Chinese state-owned enterprises remain a financial 'black hole' for the Chinese economy, in spite of various enterprise reform measures. This thesis tries to assess the impact of the reforms after 1993, especially the so-called Modern Enterprise System, on the behaviour and management practices of state firms. The central research question is whether the new rounds of economic reform have changed state firms into commercial entities operating according to market signals, as intended. In order to explore this question, an institutional approach is employed. More specifically, the thesis examines how the behaviour and management practices of state enterprises have changed with changes in the institutional environmental resulting from the introduction of new reform measures and especially the MES. The main evidence used in this research comes from the Chinese electronics industry (CEI). Non-state firms, namely collectives and joint ventures, are involved in the study to provide a benchmark against which changes in the behaviour of state firms in the mid and late 1990s are compared. A comparative statistical analysis shows that state-owned firms, both traditional and corporatised ones, still lag behind collectives and joint ventures in terms of both labour and total factor productivity. The further empirical work of this research consists of a questionnaire survey and case studies that are based on interviews with senior managers of 17 firms in the CEI. The findings of these analyses suggest that there has been little fundamental change in the behaviour pattern of state firms in the 1990s, despite the introduction of the Modern Enterprise System, and that the economic reforms after 1993 so far seem to have failed to transform the state firms into commercial entities operating according to market signals.

An assessment of the industry cluster approach as a tool for local economic development:the case of the new media industry in Birmingham

Industry cluster policies are a current trend in local economic development programmes and represent a major shift from traditional approaches. This trend has been coupled by an increasing interest in new media industry as a significant focus for regional development strategies. In England clusters and new media industry have therefore come to be seen as important tools in promoting local and regional economic development. This study aimed to ascertain the success of these policies. In order to achieve the aims of the study, the Birmingham new media industry was chosen for the study. In addition to an extensive review of the literature, semi-structured interviews were conducted with new media firms and Business Support Agencies (BSAs) offering programmes to promote the development of the new media industry cluster. The key findings of the thesis are that the concerns of new media industry when choosing their location do not conform to the industry cluster theory. Moreover, close proximity in geographical location of the industries does not mean there is collaboration and any costs saved as a result of close proximity to similar firms are at present seen as irrelevant because of the type of products they offer. Building trust between firms is the key in developing the new media industry cluster and the BSAs can act as a broker and provide neutral ground to develop it. The key policy recommendations are that new media industry is continually changing and research must continuously track and analyse cluster dynamics in order to be aware of emerging trends and future developments that can positively and negatively affect the cluster. Policy makers need to keep in mind that there is no uniform tool kit to foster the different sectors in cluster development. It is also important for them to be winning support and trust of new media firms since this is key in the success of the cluster. When cluster programs are introduced they must explain their benefits to industries more effectively in order to encourage them to participate in programmes. The general conclusions of the thesis are that clusters are a potentially important tool in local economic development policy and that the new media industry has a considerable growth potential. The kinds of relationships which cluster theory suggests develop between do not, as yet, appear to exist within the new media cluster. There are however, steps that the BSAs can take to encourage their development. Thus, the BSAs need to ensure that they establish an environment that enables growth of the industry.

An investigation of the emerging system of host government participation in the international oil industry with particular reference to Libyan participation arrangements

This study has been conceived with the primary objective of identifying and evaluating the financial aspects of the transformation in country/company relations of the international oil industry from the traditional concessionary system to the system of governmental participation in the ownership and operation of oil concessions. The emphasis of the inquiry was placed on assembling a case study of the oil exploitation arrangements of Libya. Through a comprehensive review of the literature, the sociopolitical factors surrounding the international oil business were identified and examined in an attempt to see their influence on contractual arrangements and particularly to gauge the impact of any induced contractual changes on the revenue benefit accruing to the host country from its oil operations. Some comparative analyses were made in the study to examine the viability of the Libyan participation deals both as an investment proposal and as a system of conducting oil activities in the country. The analysis was carried out in the light of specific hypotheses to assess the relative impact of the participation scheme in comparison with the alternative concessionary model on the net revenue resulting to the government from oil operations and the relative effect on the level of research and development within the industry. A discounted cash flow analysis was conducted to measure inputs and outputs of the comparative models and judge their revenue benefits. Then an empirical analysis was carried out to detect any significant behavioural changes in the exploration and development effort associated with the different oil exploitation systems. Results of the investigation of revenues support the argument that the mere introduction of the participation system has not resulted in a significant revenue benefit to the host government. Though there has been a significant increase in government revenue, associated with the period following the emergence of the participation agreements, this increase was mainly due to socio-economic factors other than the participation scheme. At the same time the empirical results have shown an association of the participation scheme with a decline of the oil industry's research and development efforts.

Energy conservation in the steel industry

The last few years have witnessed an unprecedented increase in the price of energy available to industry in the United Kingdom and worldwide. The steel industry, as a major consumer of energy delivered in U.K. (8% of national total and nearly 25% of industrial total) and whose energy costs currently form some 28% of the total manufacturing cost, is very much aware of the need to conserve energy. Because of the complexities of steelmaking processes it is imperative that a full understanding of each process and its interlinking role in an integrated steelworks is understood. An analysis of energy distribution shows that as much as 70% of heat input is dissipated to the environment in a variety of forms. Of these, waste gases offer the best potential for energy conservation. The study identifies areas for and discusses novel methods of energy conservation in each process. Application of these schemes in BSC works is developed and their economic incentives highlighted. A major part of this thesis describes design, development and testing of a novel ceramic rotary regenerator for heat recovery from high temperature waste gases, where no such system is available. The regenerator is a compact, efficient heat exchanger. Application of such a system to a reheating furnace provides a fuel saving of up to 40%. A mathematical model developed is verified on the pilot plant. The results obtained confirm the success of the concept and material selection and outlines the work needed to develop an industrial unit. Last, but not least, the key position of an energy manager in an energy conservation programme is identified and a new Energy Management Model for the BSC is developed.

A survey of UK selection practices across different organization sizes and industry sectors

This paper presents results of a study examining the methods used to select employees in 579 UK organizations representing a range of different organization sizes and industry sectors. Overall, a smaller proportion of organizations in this sample reported using formalized methods (e.g., assessment centres) than informal methods (e.g., unstructured interviews). The curriculum vitae (CVs) was the most commonly used selection method, followed by the traditional triad of application form, interviews, and references. Findings also indicated that the use of different selection methods was similar in both large organizations and small-to-medium-sized enterprises. Differences were found across industry sector with public and voluntary sectors being more likely to use formalized techniques (e.g., application forms rather than CVs and structured rather than unstructured interviews). The results are discussed in relation to their implications, both in terms of practice and future research.

8 steps for managing green innovation in the automotive industry

The car is dead, long live the car! We are about to celebrate 100 years of Ford model T, the most iconic symbol of the popularisation of cars as the means of personal mobility. The automotive industry is going through an incredible journey of redefining its purpose and the traditional characteristics of its products. More than ever, car manufacturers will need to develop and effectively implement a meaningful green innovation strategy if they want to survive in the new automotive era.

Changing policies for the automotive industry in an 'old' industrial region:an open innovation model for the UK West Midlands?

Automobile manufacture in the UK West Midlands peaked during the 1950s and early 1960s but, with overseas competition, declined thereafter. Successive policies, such as government supported mergers to form the British Motor Corporation in the 1950s, green-field development away from the region in the 1960s, nationalisation of the (then) British Leyland in the 1970s, Japanese FDI in the 1980s and the Rover-centric Accelerate Project in the 1990s have failed to halt the decline. Since early 2000, regional policy has been the responsibility of the Regional Development Agency, Advantage West Midlands. The RDA has moved away from traditional support based on the needs of big companies or ‘champions’ and adopted an approach centred on a mix of small and large businesses and high level research, and – arguably – an ‘open innovation’ model. Here, we examine these new policies and their potential to create an innovative and competitive regional environment.

Identifying innovation strategies:insights from the greek food industry

This paper emphasizes on the concept of innovation which is more and more nowadays recognized as of significant importance for all companies across different business sectors. The paper initially provides a review of the innovation literature in terms of types, classifications, and sources of innovation that have been proposed over time. Then, innovation in the context of the food industry is examined and it is attempted to identify innovation strategies followed by Greek food companies based on a value driven approach of innovation. The paper finally, provides insights from eight Greek food companies, which were selected from four subsectors: fruit and vegetables, dairy products, meat products (cured meats), and bakery products. The criterion used for the selection was market success and outstanding performance (e.g. market share, achieved results). Evidence indicates that companies tend to innovate along the dimension of offerings, which is more related to the traditional view of product and process innovation.

NITL : what the transport and logistics industry needs going forward

The transport industry - particularly in road transport - is under serious competitive pressure. Rising costs - evident but not limited to fuel and insurance - combined with a market place that has become more demanding in relation to price and service, has resulted in a situation where companies have had to seriously reassess the nature of their competitive advantage. The competitive strategies of companies in the sector are being reviewed in light of the effective commoditisation of transport as a direct result of the traditional strong emphasis on cost and price reductions.

Work-based HE pathways for the electrical power engineering industry

Aston University has been working closely with key companies from within the electricity industry for several years, initially in the development and delivery of an employer-led foundation degree programme in electrical power engineering, and more recently, in the development of a progression pathway for foundation degree graduates to achieve a Bachelors-level qualification. The Electrical Power Engineering foundation degree was developed in close consultation with the industry such that the programme is essentially owned by the sector. Programme delivery has required significant shifts away from traditional HE teaching patterns whilst maintaining the quality requirement and without compromise of the academic degree standard. Block teaching (2-week slots), partnership delivery, off-site student support and work-based learning have all presented challenges as we have sought to maximise the student learning experience and to ensure that the graduates are fit-for purpose and "hit the ground running" within a defined career structure for sponsoring companies. This paper will outline the skills challenges facing the sector; describe programme developments and delivery challenges; before articulating some observations and conclusions around programme effectiveness, impact of foundation degree graduates in the workplace and the significance of the close working relationship with key sponsoring companies. Copyright © 2012, September.

Corrosion mechanisms of duplex stainless steels in the petrochemical industry

The recent search for new sources of hydrocarbons has led to production from very severe environments which can contain considerable amounts of carbon dioxide, hydrogen sulphide, and chloride ions, combined with temperatures which can exceed 100°C. Oil and gas production from such wells requires highly corrosion-resistant materials. The traditional solution of using carbon steel with additional protection is generally inadequate in these very-aggressive environments. Duplex stainless steels (DSS) are attractive candidates because of their high strength, good general corrosion resistance, excellent resistance to chloride-induced stress corrosion cracking, and good weldability. Although duplex stainless steels have a very good reputation in both subsea and topsides pipework, it is recognized that the tolerance of these materials to variations in microstructure and chemical composition are still not fully understood. The object of this paper is to review the corrosion behaviour of duplex stainless steels in the petrochemical industry, with particular emphasis on microstructures and the effect of changes in chemical composition.

Phoenix industries and open innovation? The Midlands advanced automotive manufacturing and engineering industry

This paper explores the links between open innovation and the emergence of a ‘phoenix industry’ centred on the UK’s traditional automotive heartland, the West Midlands, which has developed a significant presence in automotive design and engineering, particularly among small and niche firms. Drawing on case study research, the paper investigates whether this can be considered as a phoenix industry, and to what extent open innovation has been important in the industry’s development. The paper considers relationships between firms and impacts in terms of changing economic and labour market conditions. The paper concludes by examining the role that public policy has played to date and might play in the future in supporting an emerging phoenix industry with open innovation features.