Pragmatic development of service based real-time change data capture

This thesis makes a contribution to the Change Data Capture (CDC) field by providing an empirical evaluation on the performance of CDC architectures in the context of realtime data warehousing. CDC is a mechanism for providing data warehouse architectures with fresh data from Online Transaction Processing (OLTP) databases. There are two types of CDC architectures, pull architectures and push architectures. There is exiguous data on the performance of CDC architectures in a real-time environment. Performance data is required to determine the real-time viability of the two architectures. We propose that push CDC architectures are optimal for real-time CDC. However, push CDC architectures are seldom implemented because they are highly intrusive towards existing systems and arduous to maintain. As part of our contribution, we pragmatically develop a service based push CDC solution, which addresses the issues of intrusiveness and maintainability. Our solution uses Data Access Services (DAS) to decouple CDC logic from the applications. A requirement for the DAS is to place minimal overhead on a transaction in an OLTP environment. We synthesize DAS literature and pragmatically develop DAS that eciently execute transactions in an OLTP environment. Essentially we develop effeicient RESTful DAS, which expose Transactions As A Resource (TAAR). We evaluate the TAAR solution and three pull CDC mechanisms in a real-time environment, using the industry recognised TPC-C benchmark. The optimal CDC mechanism in a real-time environment, will capture change data with minimal latency and will have a negligible affect on the database's transactional throughput. Capture latency is the time it takes a CDC mechanism to capture a data change that has been applied to an OLTP database. A standard definition for capture latency and how to measure it does not exist in the field. We create this definition and extend the TPC-C benchmark to make the capture latency measurement. The results from our evaluation show that pull CDC is capable of real-time CDC at low levels of user concurrency. However, as the level of user concurrency scales upwards, pull CDC has a significant impact on the database's transaction rate, which affirms the theory that pull CDC architectures are not viable in a real-time architecture. TAAR CDC on the other hand is capable of real-time CDC, and places a minimal overhead on the transaction rate, although this performance is at the expense of CPU resources.

True real-time change data capture with web service database encapsulation

This research is investigating the claim that Change Data Capture (CDC) technologies capture data changes in real-time. Based on theory, our hypothesis states that real-time CDC is not achievable with traditional approaches (log scanning, triggers and timestamps). Traditional approaches to CDC require a resource to be polled, which prevents true real-time CDC. We propose an approach to CDC that encapsulates the data source with a set of web services. These web services will propagate the changes to the targets and eliminate the need for polling. Additionally we propose a framework for CDC technologies that allow changes to flow from source to target. This paper discusses current CDC technologies and presents the theory about why they are unable to deliver changes in real-time. Following, we discuss our web service approach to CDC and accompanying framework, explaining how they can produce real-time CDC. The paper concludes with a discussion on the research required to investigate the real-time capabilities of CDC technologies. © 2010 IEEE.

Accurate modelling of pulse transformation by adjustable-in-time medium parameters

A possibility of a strong change of an electromagnetic signal by a short sequence of time cycles of pulses that modulate the medium parameters is shown. The backward wave is demonstrated to be an inevitable result of the medium time change. Dependence of the relation between backward and forward waves on the parameters of the medium modulation is investigated. The finite statistical complexity of the electromagnetic signal transformed by a finite sequence of modulating cycles is calculated. Increase of the complexity with the number of cycles is shown.

Morningness-eveningness orientation and attitude change:evidence for greater systematic processing and attitude change at optimal time-of-day

This study examines the relationship between morningness-eveningness orientation and time-of day on attitude change, and tests the hypothesis that people will be more persuaded when tested at their optimal time-of-day (i.e., morning for M-types and evening for E-types) than non-optimal time-of-day (i.e., evening for M-Types and morning for E-types). Two hundred and twenty participants read a message that contained either strong vs. weak quality counter-attitudinal arguments (anti-voluntary euthanasia) in the morning (9.00. a.m.) or in the evening (7.00. p.m.). When tested at their respective optimal time-of-day (for both M- and E-types) there was a reliable difference in attitude change between the strong vs. weak messages (indicating message processing had occurred) while there was no difference between strong vs. weak messages when tested at their non-optimal time-of-day. In addition, the amount of message-congruent thinking mediated the attitude change. The results show that M- and E-types pay greater attention to and elaborate on a persuasive message at their optimal time-of-day, and this leads to increased attitude change, compared to those tested at their non-optimal time-of-day. © 2012.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

Variation and change in the use of hesitation markers in Germanic languages

In this study, we investigate crosslinguistic patterns in the alternation between UM, a hesitation marker consisting of a neutral vowel followed by a final labial nasal, and UH, a hesitation marker consisting of a neutral vowel in an open syllable. Based on a quantitative analysis of a range of spoken and written corpora, we identify clear and consistent patterns of change in the use of these forms in various Germanic languages (English, Dutch, German, Norwegian, Danish, Faroese) and dialects (American English, British English), with the use of UM increasing over time relative to the use of UH. We also find that this pattern of change is generally led by women and more educated speakers. Finally, we propose a series of possible explanations for this surprising change in hesitation marker usage that is currently taking place across Germanic languages.

Strategy, IT and dynamic change in enterprises

This paper explores the importance of collaboration between different types of organizations within an enterprise. To achieve successful collaboration requires both endogenous and exogenous factors of each organization to be considered and a shared meta-strategy supported by shared cross-organizational processes and technology. A rolling business plan would periodically review, assess and reposition each organization within this meta-strategy according to how well they have contributed. We show that recent technological advances have made organizational structures more agile, organizational infra-structure more connected and the sharing of real-time information an operational reality; we also discuss the challenges and risks.

Technical efficiency:efficiency, change, technical progress and productivity growth in the national health systems of continental African countries

In May 2006, the Ministers of Health of all the countries on the African continent, at a special session of the African Union, undertook to institutionalise efficiency monitoring within their respective national health information management systems. The specific objectives of this study were: (i) to assess the technical efficiency of National Health Systems (NHSs) of African countries for measuring male and female life expectancies, and (ii) to assess changes in health productivity over time with a view to analysing changes in efficiency and changes in technology. The analysis was based on a five-year panel data (1999-2003) from all the 53 countries of continental Africa. Data Envelopment Analysis (DEA) - a non-parametric linear programming approach - was employed to assess the technical efficiency. Malmquist Total Factor Productivity (MTFP) was used to analyse efficiency and productivity change over time among the 53 countries' national health systems. The data consisted of two outputs (male and female life expectancies) and two inputs (per capital total health expenditure and adult literacy). The DEA revealed that 49 (92.5%) countries' NHSs were run inefficiently in 1999 and 2000; 50 (94.3%), 48 (90.6%) and 47 (88.7%) operated inefficiently in 2001, 2002, and 2003 respectively. All the 53 countries' national health systems registered improvements in total factor productivity attributable mainly to technical progress. Fifty-two countries did not experience any change in scale efficiency, while thirty (56.6%) countries' national health systems had a Pure Efficiency Change (PEFFCH) index of less than one, signifying that those countries' NHSs pure efficiency contributed negatively to productivity change. All the 53 countries' national health systems registered improvements in total factor productivity, attributable mainly to technical progress. Over half of the countries' national health systems had a pure efficiency index of less than one, signifying that those countries' NHSs pure efficiency contributed negatively to productivity change. African countries may need to critically evaluate the utility of institutionalising Malmquist TFP type of analyses to monitor changes in health systems economic efficiency and productivity over time. African national health systems, per capita total health expenditure, technical efficiency, scale efficiency, Malmquist indices of productivity change, DEA

Using process mapping and business process simulation to support a process-based approach to change in a public sector organisation

A case study demonstrates the use of a process-based approach to change regarding the implementation of an information system for road traffic accident reporting in a UK police force. The supporting tools of process mapping and business process simulation are used in the change process and assist in communicating the current process design and people's roles in the overall performance of that design. The simulation model is also used to predict the performance of new designs incorporating the use of information technology. The approach is seen to have a number of advantages in the context of a public sector organisation. These include the ability for personnel to move from a traditional grouping of staff in occupational groups with relationships defined by reporting requirements to a view of their role in a process, which delivers a performance to a customer. By running the simulation through time it is also possible to gauge how changes at an operational level can lead to the meeting of strategic targets over time. Also the ability of simulation to proof new designs was seen as particularly important in a government agency were past failures of information technology investments had contributed to a more risk averse approach to their implementation. © 2004 Elsevier Ltd. All rights reserved.

Profit sharing, technical efficiency change and finance constraints

This paper analyses the mechanisms through which profit-sharing schemes may induce debt constrained firms to improve technical efficiency over time to guarantee positive profits. This hypothesis is first formalised in a partial equilibrium framework and then is tested on a sample of Italian traditional and cooperative firms. Technical efficiency change indexes are computed by DEA. These are regressed on a measure of finance constraints to analyse their impact on firms’ efficiency growth. The results support the hypothesis that a restriction in the availability of financial resources can affect positively the growth in efficiency in firms with profit-sharing schemes.

How screening criteria change during brand development

Purpose - Despite the increasing sophistication of new product development (NPD) research, the reliance on traditional approaches to studying NPD has left several areas in need of further research. The authors propose addressing some of these gaps, especially the limited focus on consumer brands, evaluation criteria used across different project-review points in the NPD process, and the distinction between "kills", "successes", and "failures". Moreover, they propose investigating how screening criteria change across project-review points, using real-time NPD projects. Design/methodology/approach - A postal survey generated 172 usable questionnaires from a sample of European, North American, Far Eastern and Australian consumer packaged-goods firms, providing data on 314 new product projects covering different development and post-commercialization review points. Findings - The results confirm that acceptance-rejection criteria vary through the NPD process. However, financial criteria dominate across all the project-review points. Initial screening is coarse, focusing predominantly on financial criteria. Fit with organizational, product, brand, promotional, and market requirements dominate in the detailed screen and pre-development evaluation points. At pre-launch, decision-makers focus on product, brand, and promotional criteria. Commercial fit, production synergies, and reliability of the firm's market intelligence are significant discriminators in the post-launch review. Moreover, the importance of marketing and channel issues makes the criteria for screening brands different from those of industrial markets. Originality/value - The study, although largely descriptive and involves a relatively small sample of consumer goods firms, offers new insights into NPD project evaluation behavior. Future, larger-scale investigations covering a broader spectrum of consumer product sectors are needed to validate our results and to explain the reasons behind managers' decisions. © Emerald Group Publishing Limited.

Implicit leadership theories in applied settings:factor structure, generalizability, and stability over time

The present empirical investigation had a 3-fold purpose: (a) to cross-validate L. R. Offermann, J. K. Kennedy, and P. W. Wirtz's (1994) scale of Implicit Leadership Theories (ILTs) in several organizational settings and to further provide a shorter scale of ILTs in organizations; (b) to assess the generalizability of ILTs across different employee groups, and (c) to evaluate ILTs' change over time. Two independent samples were used for the scale validation (N 1 = 500 and N 2 = 439). A 6-factor structure (Sensitivity, Intelligence, Dedication, Dynamism, Tyranny, and Masculinity) was found to most accurately represent ILTs in organizational settings. Regarding the generalizability of ILTs, although the 6-factor structure was consistent across different employee groups, there was only partial support for total factorial invariance. Finally, evaluation of gamma, beta, and alpha change provided support for ILTs' stability over time.

The impact of Islamic banking on the cost efficiency and productivity change of Malaysian commercial banks

This study employs stochastic frontier analysis to analyze Malaysian commercial banks during 1996-2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalised Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68 percent, with the latter driven primarily by technical change, which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid technical change, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term cost-reducing effect in 1998, the crisis triggered a more lasting negative impact by increasing the volume of non-performing loans.

Macro-level change and micro-level effects:a twenty year perspective on changing grocery shopping behaviour in Britain

In this paper we summarise key elements of retail change in Britain over a twenty-year period. The time period is that covered by a funded study into long-term change in grocery shopping habits in Portsmouth, England. The major empirical findings—to which we briefly allude—are reported elsewhere: the present task is to assess the wider context underlying that change. For example, it has frequently been stated that retailing in the UK is not as competitive as in other leading economies. As a result, the issue of consumer choice has become increasingly important politically. Concerns over concentration in the industry, new format development and market definition have been expressed by local planners, competition regulators and consumer groups. Macro level changes over time have also created market inequality in consumer opportunities at a local level—hence our decision to attempt a local-level study. Situational factors affecting consumer experiences over time at the local level involve the changing store choice sets available to particular consumers. Using actual consumer experiences thus becomes a yardstick for assessing the practical effectiveness of policy making. The paper demonstrates that choice at local level is driven by store use and that different levels of provision reflect real choice at the local level. Macro-level policy and ‘one size fits all’ approaches to regulation, it is argued, do not reflect the changing reality of grocery shopping. Accordingly, arguments for a more local and regional approach to regulation are made.

Productivity change in the water industry in England and Wales:application of the meta-Malmquist Index

This paper uses a meta-Malmquist index for measuring productivity change of the water industry in England and Wales and compares this to the traditional Malmquist index. The meta-Malmquist index computes productivity change with reference to a meta-frontier, it is computationally simpler and it is circular. The analysis covers all 22 UK water companies in existence in 2007, using data over the period 1993–2007. We focus on operating expenditure in line with assessments in this field, which treat operating and capital expenditure as lacking substitutability. We find important improvements in productivity between 1993 and 2005, most of which were due to frontier shifts rather than catch up to the frontier by companies. After 2005, the productivity shows a declining trend. We further use the meta-Malmquist index to compare the productivities of companies at the same and at different points in time. This shows some interesting results relating to the productivity of each company relative to that of other companies over time, and also how the performance of each company relative to itself over 1993–2007 has evolved. The paper is grounded in the broad theory of methods for measuring productivity change, and more specifically on the use of circular Malmquist indices for that purpose. In this context, the contribution of the paper is methodological and applied. From the methodology perspective, the paper demonstrates the use of circular meta-Malmquist indices in a comparative context not only across companies but also within company across time. This type of within-company assessment using Malmquist indices has not been applied extensively and to the authors’ knowledge not to the UK water industry. From the application perspective, the paper throws light on the performance of UK water companies and assesses the potential impact of regulation on their performance. In this context, it updates the relevant literature using more recent data.