Techno-economic assessment and uncertainty analysis of thermochemical processes for second generation biofuels

Biomass-To-Liquid (BTL) is one of the most promising low carbon processes available to support the expanding transportation sector. This multi-step process produces hydrocarbon fuels from biomass, the so-called “second generation biofuels” that, unlike first generation biofuels, have the ability to make use of a wider range of biomass feedstock than just plant oils and sugar/starch components. A BTL process based on gasification has yet to be commercialized. This work focuses on the techno-economic feasibility of nine BTL plants. The scope was limited to hydrocarbon products as these can be readily incorporated and integrated into conventional markets and supply chains. The evaluated BTL systems were based on pressurised oxygen gasification of wood biomass or bio-oil and they were characterised by different fuel synthesis processes including: Fischer-Tropsch synthesis, the Methanol to Gasoline (MTG) process and the Topsoe Integrated Gasoline (TIGAS) synthesis. This was the first time that these three fuel synthesis technologies were compared in a single, consistent evaluation. The selected process concepts were modelled using the process simulation software IPSEpro to determine mass balances, energy balances and product distributions. For each BTL concept, a cost model was developed in MS Excel to estimate capital, operating and production costs. An uncertainty analysis based on the Monte Carlo statistical method, was also carried out to examine how the uncertainty in the input parameters of the cost model could affect the output (i.e. production cost) of the model. This was the first time that an uncertainty analysis was included in a published techno-economic assessment study of BTL systems. It was found that bio-oil gasification cannot currently compete with solid biomass gasification due to the lower efficiencies and higher costs associated with the additional thermal conversion step of fast pyrolysis. Fischer-Tropsch synthesis was the most promising fuel synthesis technology for commercial production of liquid hydrocarbon fuels since it achieved higher efficiencies and lower costs than TIGAS and MTG. None of the BTL systems were competitive with conventional fossil fuel plants. However, if government tax take was reduced by approximately 33% or a subsidy of £55/t dry biomass was available, transport biofuels could be competitive with conventional fuels. Large scale biofuel production may be possible in the long term through subsidies, fuels price rises and legislation.

Risk and uncertainty in supply markets and sustainability-related innovation

tentially valuable innovations. In energy policy, much attention is given to analysing and incentivising customer demand, but new technologies also need new supply markets, to provide products and services to build, operate and maintain the innovative technology. This paper addresses the impact of supply constraints on the long-term viability of sustainability related innovations, using the case of energy from waste (EfW). Uncertainties in the pricing and availability of feedstock (i.e. waste) deter potential investors in EfW projects. We draw on prior supply management research to conceptualise the problem, and identify what steps might be taken to address it. Based on this analysis, we propose a research agenda aimed at purchasing and supply scholars and centred on the need to understand better how markets evolve and how stakeholders can (legitimately) influence the evolution of supply markets to support the adoption of sustainability related innovation. Within this broad case, specific themes are recommended for further investigation.

Enhancing the performance of intelligent control systems in the face of higher levels of complexity and uncertainty

Modern advances in technology have led to more complex manufacturing processes whose success centres on the ability to control these processes with a very high level of accuracy. Plant complexity inevitably leads to poor models that exhibit a high degree of parametric or functional uncertainty. The situation becomes even more complex if the plant to be controlled is characterised by a multivalued function or even if it exhibits a number of modes of behaviour during its operation. Since an intelligent controller is expected to operate and guarantee the best performance where complexity and uncertainty coexist and interact, control engineers and theorists have recently developed new control techniques under the framework of intelligent control to enhance the performance of the controller for more complex and uncertain plants. These techniques are based on incorporating model uncertainty. The newly developed control algorithms for incorporating model uncertainty are proven to give more accurate control results under uncertain conditions. In this paper, we survey some approaches that appear to be promising for enhancing the performance of intelligent control systems in the face of higher levels of complexity and uncertainty.

The framework of the virtual laser tracker - A systematic approach to the assessment of error sources and uncertainty in laser tracker measurement

Laser trackers have been widely used in many industries to meet increasingly high accuracy requirements. In laser tracker measurement, it is complex and difficult to perform an accurate error analysis and uncertainty evaluation. This paper firstly reviews the working principle of single beam laser trackers and state-of- The- Art of key technologies from both industrial and academic efforts, followed by a comprehensive analysis of uncertainty sources. A generic laser tracker modelling method is formulated and the framework of the virtual tracker is proposed. The VLS can be used for measurement planning, measurement accuracy optimization and uncertainty evaluation. The completed virtual laser tracking system should take all the uncertainty sources affecting coordinate measurement into consideration and establish an uncertainty model which will behave in an identical way to the real system. © Springer-Verlag Berlin Heidelberg 2010.

Quantitative risk assessment of groundwater quality utilizing GIS technology and coupled groundwater models

The thesis presents a two-dimensional Risk Assessment Method (RAM) where the assessment of risk to the groundwater resources incorporates both the quantification of the probability of the occurrence of contaminant source terms, as well as the assessment of the resultant impacts. The approach emphasizes the need for a greater dependency on the potential pollution sources, rather than the traditional approach where assessment is based mainly on the intrinsic geo-hydrologic parameters. The risk is calculated using Monte Carlo simulation methods whereby random pollution events were generated to the same distribution as historically occurring events or a priori potential probability distribution. Integrated mathematical models then simulate contaminant concentrations at the predefined monitoring points within the aquifer. The spatial and temporal distributions of the concentrations were calculated from repeated realisations, and the number of times when a user defined concentration magnitude was exceeded is quantified as a risk. The method was setup by integrating MODFLOW-2000, MT3DMS and a FORTRAN coded risk model, and automated, using a DOS batch processing file. GIS software was employed in producing the input files and for the presentation of the results. The functionalities of the method, as well as its sensitivities to the model grid sizes, contaminant loading rates, length of stress periods, and the historical frequencies of occurrence of pollution events were evaluated using hypothetical scenarios and a case study. Chloride-related pollution sources were compiled and used as indicative potential contaminant sources for the case study. At any active model cell, if a random generated number is less than the probability of pollution occurrence, then the risk model will generate synthetic contaminant source term as an input into the transport model. The results of the applications of the method are presented in the form of tables, graphs and spatial maps. Varying the model grid sizes indicates no significant effects on the simulated groundwater head. The simulated frequency of daily occurrence of pollution incidents is also independent of the model dimensions. However, the simulated total contaminant mass generated within the aquifer, and the associated volumetric numerical error appear to increase with the increasing grid sizes. Also, the migration of contaminant plume advances faster with the coarse grid sizes as compared to the finer grid sizes. The number of daily contaminant source terms generated and consequently the total mass of contaminant within the aquifer increases in a non linear proportion to the increasing frequency of occurrence of pollution events. The risk of pollution from a number of sources all occurring by chance together was evaluated, and quantitatively presented as risk maps. This capability to combine the risk to a groundwater feature from numerous potential sources of pollution proved to be a great asset to the method, and a large benefit over the contemporary risk and vulnerability methods.

Integrating technology and operations in a developing country context

The importance of technology to developing countries is widely recognised as they compete internationally and develop internally. Firms acquire technology by different means and from diverse sources, and they possess varying levels of competence. Since countries are at various stages of economic and technological development, prescriptive approaches to technology and operations integration are not appropriate. The paper discusses factors in the literature that affect the integration of technology and operations in developing countries. Country similarities and differences also play a role, so the study examines three developing countries: Brazil, India and South Africa. These countries are emerging from periods of regulation and have developed certain sectors of their economies. Empirical evidence is provided from a study of managers in South Africa who were asked to assess the important factors in technology integration, and to score the extent to which they can control these. Results from the study concur with the literature regarding the importance of a country’s political stability and its policies towards new investment and infrastructure. Knowledge and understanding of technology are essential for successful integration in countries with insufficient skilled personnel, and where education levels are low.

The causal relationship between information and communication technology and foreign direct investment

This paper investigates the simultaneous causal relationship between investments in information and communication technology (ICT) and flows of foreign direct investment (FDI), with reference to its implications on economic growth. For the empirical analysis we use data from 23 major countries with heterogeneous economic development for the period 1976-99. Our causality test results suggest that there is a causal relationship from ICT to FDI in developed countries, which means that a higher level of ICT investment leads to an increase inflow of FDI. ICT may contribute to economic growth indirectly by attracting more FDI. Contrarily, we could not find significant causality from ICT to FDI in developing countries. Instead, we have partial evidence of opposite causality relationship: the inflow of FDI causes further increases in ICT investment and production capacity. © United Nations University 2006.

Self-service technology and the service encounter

Self-service technology is affecting the service encounter. The potential reduction in personal contact through self-service technology may affect assessments of consumer satisfaction and commitment, making it necessary to investigate self-service technology usage, particularly the long-term impact on consumers' relationships with service organisations. Thus, this paper presents a framework for investigating the impact of self-service technology on consumer satisfaction and on a multi-dimensional measure of consumer commitment. Illustrative quotes from exploratory in-depth interviews support the framework and lead to a set of propositions. Future research directions for testing the framework are also discussed, and potential implications of this research are outlined.

Determining consumer satisfaction and commitment through self-service technology and personal service usage

This paper expands research into self-service technology in the service encounter. Self-service technology is where customers deliver service themselves using some form of a technological interface. There is still a great deal unknown about self-service technology, in particular its impact on consumer satisfaction and consumer commitment. With that in mind, this empirical study explores the relative impact of self-service technology on consumer satisfaction and on a multidimensional measure of consumer commitment containing affective commitment, temporal commitment and instrumental commitment. The results reveal that in a hotel context personal service still remains very important for assessments of satisfaction, and affective and temporal commitment. What is particularly interesting is that self-service technology, while impacting these constructs, also impacts instrumental commitment. This suggests that positive evaluations of self-service technology may tie consumers into relationships with hotels. A discussion and implications for managers are provided on these and other results, and the paper is concluded with further potential research.

Seeing light vs dark lines: psychophysical performance is based on separate channels, limited by noise and uncertainty

Visual detection performance (d') is usually an accelerating function of stimulus contrast, which could imply a smooth, threshold-like nonlinearity in the sensory response. Alternatively, Pelli (1985 Journal of the Optical Society of America A 2 1508 - 1532) developed the 'uncertainty model' in which responses were linear with contrast, but the observer was uncertain about which of many noisy channels contained the signal. Such internal uncertainty effectively adds noise to weak signals, and predicts the nonlinear psychometric function. We re-examined these ideas by plotting psychometric functions (as z-scores) for two observers (SAW, PRM) with high precision. The task was to detect a single, vertical, blurred line at the fixation point, or identify its polarity (light vs dark). Detection of a known polarity was nearly linear for SAW but very nonlinear for PRM. Randomly interleaving light and dark trials reduced performance and rendered it non-linear for SAW, but had little effect for PRM. This occurred for both single-interval and 2AFC procedures. The whole pattern of results was well predicted by our Monte Carlo simulation of Pelli's model, with only two free parameters. SAW (highly practised) had very low uncertainty. PRM (with little prior practice) had much greater uncertainty, resulting in lower contrast sensitivity, nonlinear performance, and no effect of external (polarity) uncertainty. For SAW, identification was about v2 better than detection, implying statistically independent channels for stimuli of opposite polarity, rather than an opponent (light - dark) channel. These findings strongly suggest that noise and uncertainty, rather than sensory nonlinearity, limit visual detection.

The integration of knowledge within science, technology and industry : enzymes a case study

Enzyme technology is widely regarded as an exciting new technology possessing great opportunities for commercial interests and is one of a small group of key technologies singled out by the Science Research Councils during the 1960's as worthy of special support. In this thesis I outline the basic characteristics of this technology analysing the nature of the Government's policy towards it. The approach I have chosen requires an in depth analysis of the innovation process for enzymes which forms the basis for a model. This model is then used to focus on aspects of the UK science policy towards innovation in enzyme technology, assessing its impacts, and appraising the usefulness of this approach for future policy initiatives.

Advanced manufacturing technology and work design:towards a theoretical framework

This paper introduces a theoretical framework to guide research into the psychological effects of advanced manufacturing technology (AMT) on shopfloor operators. The framework has two main aspects. First, based on the emerging literature on the job content implications of AMT, it identifies four key constructs, namely: control, cognitive demand, production responsibility and social interaction. Second, by drawing on the more established job design, stress and related literatures, it predicts how these independent variables differentially affect system performance, job-related strain and job satisfaction. The wider implications and limitations of the theoretical framework are discussed.

Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.