Determining the contribution of technical change, efficiency change and scale change to productivity growth in the privatized English and Welsh water and sewerage industry:1985-2000

The water and sewerage industry of England and Wales was privatized in 1989 and subjected to a new regime of environmental, water quality and RPI+K price cap regulation. This paper estimates a quality-adjusted input distance function, with stochastic frontier techniques in order to estimate productivity growth rates for the period 1985-2000. Productivity is decomposed so as to account for the impact of technical change, efficiency change, and scale change. Compared with earlier studies by Saal and Parker [(2000) Managerial Decision Econ 21(6):253-268, (2001) J Regul Econ 20(1): 61-90], these estimates allow a more careful consideration of how and whether privatization and the new regulatory regime affected productivity growth in the industry. Strikingly, they suggest that while technical change improved after privatization, productivity growth did not improve, and this was attributable to efficiency losses as firms appear to have struggled to keep up with technical advances after privatization. Moreover, the results also suggest that the excessive scale of the WaSCs contributed negatively to productivity growth. © 2007 Springer Science+Business Media, LLC.

The environmental impacts of technical change

The thesis is concerned with relationships between profit, technology and environmental change. Existing work has concentrated on only a few questions, treated at either micro or macro levels of analysis. And there has been something of an impasse since the neoclassical and neomarxist approaches are either in direct conflict (macro level), or hardly interact (micro level). The aim of the thesis was to bypass this impasse by starting to develop a meso level of analysis that focusses on issues largely ignored in the traditional approaches - on questions about distribution. The first questions looked at were descriptive - what were the patterns of distribution over time of the variability in types and rates of environmental change, and in particular, was there any evidence of periodization? Two case studies were used to examine these issues. The first looked at environmental change in the iron and steel industry since 1700, and the second studied pollution in five industries in the basic processing sector. It was established that environmental change has been markedly periodized, with an apparently fairly regular `cycle length' of about fifty years. The second questions considered were explanatory - whether and how this periodization could be accounted for by reference to variations in aspects of profitability and technical change. In the iron and steel industry, it was found that diffusion rates and the rate of nature of innovation were periodized on the same pattern as was environmental change. And the same sort of variation was also present in the realm of profits, as evidenced by cyclical changes in output growth. Simple theoretical accounts could be given for all the empirically demonstrable links, and it was suggested that the most useful models at this meso level of analysis are provided by structural change models of economic development.

Technical change and work organisation

This thesis is an exploration of the social and political processes involved in the introduction of new technology to the shopfloor. Through a series of case studies of applications of microelectronics to batch manufacture, it attempts to uncover the ways in which the values and interests of managers, engineers, workers and others profoundly influence the choice and use of technology, and thus the work organisation which emerges. Previous analyses have tended to treat new technology as if it had "impacts" on work organisation - especially skills - which are inevitable in particular technical and economic circumstances. It is in opposition to this view that technical change is here treated as a matter for social choice and political negotiation, the various interested parties to the change being shown to attempt to incorporate their own interests into the technical and social organisation of work. Section one provides the relevant background to the case studies by summarising and criticising previous theoretical and empirical work in the area. The inadequacies of this work for our concerns are drawn out, and the need for detailed studies of the political aspects of technical change is justified. The case studies are presented in section two as a set of "episodes" of innovation, and section three analyses the empirical findings. The innovations are compared and contrasted in order to illustrate the social and political dynamics involved in the various stages of the innovation process. Finally some comments are made on policy issues for which the research has important implications.

The impact of Islamic banking on the cost efficiency and productivity change of Malaysian commercial banks

This study employs stochastic frontier analysis to analyze Malaysian commercial banks during 1996-2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalised Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68 percent, with the latter driven primarily by technical change, which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid technical change, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term cost-reducing effect in 1998, the crisis triggered a more lasting negative impact by increasing the volume of non-performing loans.

Technical innovation in industrial production

New techniques in manufacturing, popularly referred to as mechanization and automation, have been a preoccupation of social and economic theorists since the industrial revolution. A selection of relevant literature is reviewed, including the neoclassical economic treatment of technical change. This incorporates alterations to the mathematical production function and an associated increase in the efficiency with which the factors of production are converted into output. Other work emphasises the role of research and development and the process of diffusion, whereby new production techniques are propagated throughout industry. Some sociological writings attach importance to the type of production technology and its effect on the organisational structure and social relations within the factory. Nine detailed case studies are undertaken of examples of industrial innovation in the rubber, automobile, vehicle components, confectionery and clothing industries. The old and new techniques are compared for a range of variables, including capital equipment, labour employed, raw materials used, space requirements and energy consumption, which in most cases exhibit significant change with the innovation. The rate of output, labour productivity, product quality, maintenance requirements and other aspects are also examined. The process by which the change in production method was achieved is documented, including the development of new equipment and the strategy of its introduction into the factory, where appropriate. The firm, its environment, and the attitude of different sectors of the workforce are all seen to play a part in determining the motives for and consequences which flow from the innovations. The traditional association of technical progress with its labour-saving aspect, though an accurate enough description of the cases investigated, is clearly seen to afford an inadequate perspective for the proper understanding of this complex phenomenon, which also induces change in a wide range of other social, economic and technical variables.

The impact of Islamic banking on the cost efficiency and productivity change of Malaysian commercial banks

This study employs Stochastic Frontier Analysis (SFA) to analyse Malaysian commercial banks during 1996–2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalized Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68%, with the latter driven primarily by Technical Change (TC), which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid TC, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term costreducing effect in 1998, the crisis triggered a long-lasting negative impact by increasing the volume of nonperforming loans.

Measurement efficiency and productivity in SAS/OR

This paper explores the use of the optimisation procedures in SAS/OR software with application to the measurement of efficiency and productivity of decision-making units (DMUs) using data envelopment analysis (DEA) techniques. DEA was originally introduced by Charnes et al. [J. Oper. Res. 2 (1978) 429] is a linear programming method for assessing the efficiency and productivity of DMUs. Over the last two decades, DEA has gained considerable attention as a managerial tool for measuring performance of organisations and it has widely been used for assessing the efficiency of public and private sectors such as banks, airlines, hospitals, universities and manufactures. As a result, new applications with more variables and more complicated models are being introduced. Further to successive development of DEA a non-parametric productivity measure, Malmquist index, has been introduced by Fare et al. [J. Prod. Anal. 3 (1992) 85]. Employing Malmquist index, productivity growth can be decomposed into technical change and efficiency change. On the other hand, the SAS is a powerful software and it is capable of running various optimisation problems such as linear programming with all types of constraints. To facilitate the use of DEA and Malmquist index by SAS users, a SAS/MALM code was implemented in the SAS programming language. The SAS macro developed in this paper selects the chosen variables from a SAS data file and constructs sets of linear-programming models based on the selected DEA. An example is given to illustrate how one could use the code to measure the efficiency and productivity of organisations.

International and intranational technological spillovers and productivity growth in China

Technological spillovers from foreign direct investment (FDI) have been regarded as a major source of technical progress and productivity growth. This paper explores the role of international and intranational technological spillovers from FDI in technical change, efficiency improvement, and total factor productivity growth in Chinese manufacturing firms using a recent Chinese manufacturing firm-level panel data set over the 2001–05 period. International industry-specific research and development (R&D) stock is linked to the Chinese firm-level data, international R&D spillovers from FDI and intranational technological spillovers of R&D activities by foreign invested firms in China are examined as well. Policy implications are discussed.

Total factor productivity and the spillover hypothesis: some new evidence

In this paper I test the spillover hypothesis of the endogenous growth literature on a sample of manufacturing firms in Italy, 1989–1994, using a new approach based on the Malmquist index. First, I measure the productivity growth registered by the high- and non-high-tech firms computing the Malmquist index with DEA. I decompose it into technical change and technical efficiency change. Then I test whether the technical change registered by high-tech firms affects productivity growth of non-high-tech firms, after controlling for factors which can potentially affect productivity growth.

A cost Malmquist productivity index

This paper develops a productivity index applicable when producers are cost minimisers and input prices are known. The index is inspired by the Malmquist index as extended to productivity measurement. The index developed here is defined in terms of input cost rather than input quantity distance functions. Hence, productivity change is decomposed into overall efficiency and cost technical change. Furthermore, overall efficiency change is decomposed into technical and allocative efficiency change and cost technical change into a part capturing shifts of input quantities and shifts of relative input prices. These decompositions provide a clearer picture of the root sources of productivity change. They are illustrated here in a sample of hospitals; results are computed using non-parametric mathematical programming. © 2003 Elsevier B.V. All rights reserved.

Testing incremental politics : the case of North Sea oil

In the quest to secure the much vaunted benefits of North Sea oil, highly non-incremental technologies have been adopted. Nowhere is this more the case than with the early fields of the central and northern North Sea. By focusing on the inflexible nature of North Sea hardware, in such fields, this thesis examines the problems that this sort of technology might pose for policy making. More particularly, the following issues are raised. First, the implications of non-incremental technical change for the successful conduct of oil policy is raised. Here, the focus is on the micro-economic performance of the first generation of North Sea oil fields and the manner in which this relates to government policy. Secondly, the question is posed as to whether there were more flexible, perhaps more incremental policy alternatives open to the decision makers. Conclusions drawn relate to the degree to which non-incremental shifts in policy permit decision makers to achieve their objectives at relatively low cost. To discover cases where non-incremental policy making has led to success in this way, would be to falsify the thesis that decision makers are best served by employing incremental politics as an approach to complex problem solving.

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the role of indigenous and foreign innovation efforts in technological upgrading in developing countries, taking into account sectoral specificities in technical change. Using a Chinese firm-level panel dataset covering 2001–05, the paper decomposes productivity growth into technical change and efficiency improvement and examines the impact of indigenous and foreign innovation efforts on these changes. Indigenous firms are found to be the leading force on the technological frontier in the low- and medium-technology industries, while foreign-invested firms enjoy a clear lead in the high-technology sector. Collective indigenous R&D activities at the industry level are found to be the major driver of technology upgrading of indigenous firms that push out the technology frontier. While foreign investment appears to contribute to static industry capabilities, R&D activities of foreign-invested firms have exerted a significant negative effect on the technical change of local firms over the sample period.

Estimation of TFP growth:a semiparametric smooth coefficient approach

This article uses a semiparametric smooth coefficient model (SPSCM) to estimate TFP growth and its components (scale and technical change). The SPSCM is derived from a nonparametric specification of the production technology represented by an input distance function (IDF), using a growth formulation. The functional coefficients of the SPSCM come naturally from the model and are fully flexible in the sense that no functional form of the underlying production technology is used to derive them. Another advantage of the SPSCM is that it can estimate bias (input and scale) in technical change in a fully flexible manner. We also used a translog IDF framework to estimate TFP growth components. A panel of U.S. electricity generating plants for the period 1986–1998 is used for this purpose. Comparing estimated TFP growth results from both parametric and semiparametric models against the Divisia TFP growth, we conclude that the SPSCM performs the best in tracking the temporal behavior of TFP growth.

Absorptive capacity and the benefits from global reservoirs of knowledge:evidence from a linked China-OECD dataset

This paper investigates the role of absorptive capacity in the diffusion of global technology with sector and firm heterogeneity. We construct the FDI-intensity weighted global R&D stock for each industry and link it to Chinese firm-level panel data relating to 53,981 firms over the period 2001-2005. Non-parametric frontier analysis is employed to explore how absorptive capacity affects technical change and catch-up in the presence of global knowledge spillovers. We find that R&D activities and training at individual firms serve as an effective source of absorptive capability. The contribution of absorptive capacity varies according to the type of FDI and the extent of openness.