Evaluating approaches to product design and sourcing decisions in multinational companies

Product design and sourcing decisions are among the most difficult and important of all decisions facing multinational manufacturing companies, yet associated decision support and evaluation systems tend to be myopic in nature. Design for manufacture and assembly techniques, for example, generally focuses on manufacturing capability and ignores capacity although both should be considered. Similarly, most modelling and evaluation tools available to examine the performance of various solution and improvement techniques have a narrower scope than desired. A unique collaboration, funded by the US National Science Foundation, between researchers in the USA and the UK currently addresses these problems. This paper describes a technique known as Design For the Existing Environment (DFEE) and an holistic evaluation system based on enterprise simulation that was used to demonstrate the business benefits of DFEE applied in a simple product development and manufacturing case study. A project that will extend these techniques to evaluate global product sourcing strategies is described along with the practical difficulties of building an enterprise simulation on the scale and detail required.

Product design in the context of the social needs in less industrialised economies

This thesis is related to the subject of technical innovation, specifically to the activity of design in microenterprises operating in less industrialised economies. Design here is understood as a process, which is not the sole domain of formally trained categories such as engineers, architects or industrial designers. The 'professional boundary' discussion in this investigation is perceived as secondary as, in this context, products are designed, copied or adapted by workers, entrepreneurs themselves, or directly by the poor community. Design capacity at this level is considered to be important both in relation to the conception of capital and consumer goods and to the building up of technical knowledge. Although professional design emerged in Latin America little over three decades ago, this activity has remained marginalised throughout industry. Design activity tends to be concentrated in some product categories in the formalised industrial sector. For microenterprises operating informally, industrial design appears to be unknown. The existing literature pays little attention to 'informal design' capacity. Other areas of knowledge, such as development economies, recognise the importance of microenterprises and technological capability but neglect the potential role of industrial design in small manufacturing units. The management literature, though it focuses on technical innovation and design, has also paid little attention to 'informal design'. In less industrialised economies this neglect is felt by the lack of programmes specifically tailored to create or stimulate 'informal design'. There is a need for recognition of 'informal design' capacity and for the implementation of programmes which specifically target design as a central activity in the manufacturing firm, independent of their size and technological capability. Addressing 'design by the poor for the poor', requires a down-to-earth approach.

Evaluating the impact of design decisions on the financial performance of manufacturing companies

Product design decisions can have a significant impact on the financial and operation performance of manufacturing companies. Therefore good analysis of the financial impact of design decisions is required if the profitability of the business is to be maximised. The product design process can be viewed as a chain of decisions which links decisions about the concept to decisions about the detail. The idea of decision chains can be extended to include the design and operation of the 'downstream' business processes which manufacture and support the product. These chains of decisions are not independent but are interrelated in a complex manner. To deal with the interdependencies requires a modelling approach which represents all the chains of decisions, to a level of detail not normally considered in the analysis of product design. The operational, control and financial elements of a manufacturing business constitute a dynamic system. These elements interact with each other and with external elements (i.e. customers and suppliers). Analysing the chain of decisions for such an environment requires the application of simulation techniques, not just to any one area of interest, but to the whole business i.e. an enterprise simulation. To investigate the capability and viability of enterprise simulation an experimental 'Whole Business Simulation' system has been developed. This system combines specialist simulation elements and standard operational applications software packages, to create a model that incorporates all the key elements of a manufacturing business, including its customers and suppliers. By means of a series of experiments, the performance of this system was compared with a range of existing analysis tools (i.e. DFX, capacity calculation, shop floor simulator, and business planner driven by a shop floor simulator).

Success factors of product innovation:an updated meta-analysis

Assessing factors that predict new product success (NPS) holds critical importance for companies, as research shows that despite considerable new product investment, success rates are generally below 25%. Over the decades, meta-analytical attempts have been made to summarize empirical findings on NPS factors. However, market environment changes such as increased global competition, as well as methodological advancements in meta-analytical research, present a timely opportunity to augment their results. Hence, a key objective of this research is to provide an updated and extended meta-analytic investigation of the factors affecting NPS. Using Henard and Szymanski's meta-analysis as the most comprehensive recent summary of empirical findings, this study updates their findings by analyzing articles published from 1999 through 2011, the period following the original meta-analysis. Based on 233 empirical studies (from 204 manuscripts) on NPS, with a total 2618 effect sizes, this study also takes advantage of more recent methodological developments by re-calculating effects of the meta-analysis employing a random effects model. The study's scope broadens by including overlooked but important additional variables, notably “country culture,” and discusses substantive differences between the updated meta-analysis and its predecessor. Results reveal generally weaker effect sizes than those reported by Henard and Szymanski in 2001, and provide evolutionary evidence of decreased effects of common success factors over time. Moreover, culture emerges as an important moderating factor, weakening effect sizes for individualistic countries and strengthening effects for risk-averse countries, highlighting the importance of further investigating culture's role in product innovation studies, and of tracking changes of success factors of product innovations. Finally, a sharp increase since 1999 in studies investigating product and process characteristics identifies a significant shift in research interest in new product development success factors. The finding that the importance of success factors generally declines over time calls for new theoretical approaches to better capture the nature of new product development (NPD) success factors. One might speculate that the potential to create competitive advantages through an understanding of NPD success factors is reduced as knowledge of these factors becomes more widespread among managers. Results also imply that managers attempting to improve success rates of NPDs need to consider national culture as this factor exhibits a strong moderating effect: Working in varied cultural contexts will result in differing antecedents of successful new product ventures.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Design determines 70% of cost? A review of implications for design evaluation

This paper disputes the fact that product design determines 70% of costs and the implications that follow for design evaluation tools. Using the idea of decision chains, it is argued that such tools need to consider more of the downstream business activities and should take into account the current and future state of the business rather than some idealized view of it. To illustrate the argument, a series of experiments using an enterprise simulator are described that show the benefit from the application of a more holistic 'design for' technique. Design For the Existing Environment.

Greening operations: an investigation of environmental decision making

This PhD thesis belongs to three main knowledge domains: operations management, environmental management, and decision making. Having the automotive industry as the key sector, the investigation was undertaken aiming at deepening the understanding of environmental decision making processes in the operations function. The central research question for this thesis is ?Why and how do manufacturing companies take environmental decisions? This PhD research project used a case study research strategy supplemented by secondary data analysis and the testing and evaluation of a proposed systems thinking model for environmental decision making. Interviews and focus groups were the main methods for data collection. The findings of the thesis show that companies that want to be in the environmental leadership will need to take environmental decisions beyond manufacturing processes. Because the benefits (including financial gain) of non-manufacturing activities are not clear yet the decisions related to product design, supply chain and facilities are fully embedded with complexity, subjectivism, and intrinsic risk. Nevertheless, this is the challenge environmental leaders will face - they may enter in a paradoxical state of their decisions – where although the risk of going greener is high, the risk of not doing it is even higher.

Adopting the experiential values propositions as e-atmospherics:an illustration through the case of e-banking

For a couple of years now, the Columbia Business School and in particular Bernd Schmitt have been advocating for more work to be done regarding 'experiential marketing'. Taking the case of e-atmospherics in Turkish e-banking practices, we revisit the theory of strategic experiential modules which are sense, feel, think, act and relate. Two major ebanking experience providers' types of communication, product design, retail presence and epresence have been unpacked. These are Garanti Bank, who's known with its many award winning web site, and Akbank who has a standard web site. The Turkish banking at the border of the EU and under global influences has expended and liberalized dramatically over the last decade making the most of new technologies, hence offering an interesting perspective in a non-homogenous society where the technological divide remains important. First a qualitative content analysis of both bank's homepages is conducted. This is followed by 43 online surveys, where 18 is Garanti Bank consumer, 19 is Akbank consumer and 6 is both Garanti and Akbank consumer, to explore how e-atmospherics experiential features currently recognized by users. Our findings indicate that experiential marketing in e-banking can be expected to be the key to greater online migration of consumers and differentiation among the players. Yet, while the first two steps sense and feel are explicitly developed by both players, act and relate still remain poor. Moreover, 'think' is discovered to be a key moderator where both banks seem to lack clear strategy.

The impact of NC machinery upon manufacturing industry

The changing face of industry due to the adoption of `New Technology' is briefly discussed, as are the corresponding structural changes in the workforce. The adoption of NC machinery is identified as one of the major innovations affecting the structure of industry. The development of NC machinery, and of relevant programming techniques are reviewed, and the problems arising from its initial sponsorship by the aerospace industry are highlighted. The process of its subsequent diffusion into industry is reviewed. Skill levels adopted for NC use in Britain and Germany are discussed, and analysed to create a structural pattern. These classifications of skill levels are then used to examine the organisational structures adopted by companies utilising NC machines. The greater use made of higher level shop floor skills by German companies is discussed. The results of two surveys of the use made of NC by companies in the North East of England are presented. Effective company organisation for NC use is described, and lack of foresight is shown to lead to vulnerability problems where skills can become concentrated in a few key people. This led to closure of a company in one instance. It is shown that small sub-contract companies have adopted a highly skilled shop floor workforce, and that they have survived in the present hostile economic environment, whilst companies who have used NC to de-skill the shop floor contracted dramatically in the same period. The lack of awareness of the potential for reviewing the product design in relation to the flexibility of NC, so leading to reductions in work in progress levels, is highlighted. Recommendations for skill structures appropriate to various sized companies and suitable training programs are presented to ensure that the full potential of NC machinery is achieved.

Computer aided form roll design

Cold roll forming is an extremely important but little studied sheet metal forming process. In this thesis, the process of cold roll forming is introduced and it is seen that form roll design is central to the cold roll forming process. The conventional design and manufacture of form rolls is discussed and it is observed that surrounding the design process are a number of activities which although peripheral are time consuming and a possible source of error. A CAD/CAM system is described which alleviates many of the problems traditional to form roll design. New techniques for the calculation of strip length and controlling the means of forming bends are detailed. The CAD/CAM system's advantages and limitations are discussed and, whilst the system has numerous significant advantages, its principal limitation can be said to be the need to manufacture form rolls and test them on a mill before a design can be stated satisfactory. A survey of the previous theoretical and experimental analysis of cold roll forming is presented and is found to be limited. By considering the previous work, a method of numerical analysis of the cold roll forming process is proposed based on a minimum energy approach. Parallel to the numerical analysis, a comprehensive range of software has been developed to enhance the designer's visualisation of the effects of his form roll design. A complementary approach to the analysis of form roll design is the generation of form roll design, a method for the partial generation of designs is described. It is suggested that the two approaches should continue in parallel and that the limitation of each approach is knowledge of the cold roll forming process. Hence, an initial experimental investigation of the rolling of channel sections is described. Finally, areas of potential future work are discussed.

A rationale for the optimisation by computer methods of the efficient use of metals and materials

The aim of the research project was to gain d complete and accurate accounting of the needs and deficiencies of materials selection and design data, with particular attention given to the feasibility of a computerised materials selection system that would include application analysis, property data and screening techniques. The project also investigates and integrates the three major aspects of materials resources, materials selection and materials recycling. Consideration of the materials resource base suggests that, though our discovery potential has increased, geologic availability is the ultimate determinant and several metals may well become scarce at the same time, thus compounding the problem of substitution. With around 2- to 20- million units of engineering materials data, the use of a computer is the only logical answer for scientific selection of materials. The system developed at Aston is used for data storage, mathematical computation and output. The system enables programs to be run in batch and interactive (on-line) mode. The program with modification can also handle such variables as quantity of mineral resources, energy cost of materials and depletion and utilisation rates of strateqic materials. The work also carries out an in-depth study of copper recycling in the U.K. and concludes that, somewhere in the region of 2 million tonnes of copper is missing from the recycling cycle. It also sets out guidelines on product design and conservation policies from the recyclability point of view.

Beyond theory:an examination of lean new product introduction practices in the UK

Interest is growing around the application of lean techniques to new product introduction (NPI). Although a relatively emergent topic compared with the application of ‘lean’ within the factory, since 2000 there has been an exponential rise in the literature on this subject. However, much of this work focuses on describing and extolling the virtues of the ‘Toyota approach’ to design. Therefore, by way of a stock take for the UK, the present authors' research has set out to understand how well lean product design practices have been adopted by leading manufacturers. This has been achieved by carrying out in-depth case studies with three carefully selected manufacturers of complex engineered products. This paper describes these studies, the detailed results and subsequent findings, and concludes that both the awareness and adoption of practices is generally embryonic and far removed from the theory advocated in the literature.

Teamwork for product innovation in Taiwanese family firms:an indigenous psychology perspective: An indigenous psychology

As the existing team literature mostly excludes context and culture, little is known about how these elements affect real-life team working (Engestrom, 2008; Salas & Wildman, 2009), and how teams work in non-Western settings, such as in Chinese firms (Phan, Zhou, & Abrahamson, 2010).This research addresses this issue by investigating how new product design (NPD) teams use team working to carry out product innovation in the context of Chinese family businesses (CFBs) via an indigenous psychology perspective. Unlike mainstream teamwork literature which mostly employs an etic design, an indigenous psychology perspective adopts an emic approach which places emphasis on understanding real-life phenomena in context through a cultural-insider perspective (Kim, 2000). Compatible with this theoretical position, a multiple qualitative case study approach was used as the research methodology. Three qualitative case studies were carried out in three longstanding family-run manufacturing firms in Taiwan, where family firms have been the pillars of high economic growth in the past five decades (W.-w. Chu, 2009). Two salient findings were established across the three case studies. First, the team processes identified across the three family firms are very similar with the exception of owners’ involvement and on-the-job training. All three family firms’ NPD teams are managed in a highly hierarchical manner, with considerable emphasis placed on hierarchical ranking, cost-effectiveness, efficiency, practicability, and interpersonal harmony. Second, new products developed by CFBNPD teams are mostly incremental innovation or copycat innovation, while radical or original products are rare. In many ways, CFBNPD teams may not be the ideal incubators for innovation. This is because several aspects of their unique context can cast constraints on how they work and innovate, and thus limit the ratio of radical innovation. A multi-level review into the facilitators and inhibitors of creativity or innovation in CFBNPD teams is provided. The theoretical and practical implications of the findings and the limitations of the study are also addressed.

Design and designing:a critical introduction

Design and Designing provides a broad and critical understanding of what is essentially a practical subject. Designing today is less a craft and more a part of the knowledge economy. It's all about knowing how to acquire knowledge and how to apply it creatively. Design and Designing covers the design process, modelling and drawing, working with clients, production and consumption, sustainability, professional practice and design futures. Chapters are written by expert teachers and practitioners from around the globe, each presenting an accessible and engaging overview of their field of design. Every chapter is highly illustrated with a combination of images and information boxes, which extend or highlight key material. Each section concludes with a design project, a hands-on activity for the reader. Design and Designing covers the full spectrum of design types, from graphic communication to product design, from fashion to games design, setting every type in its aesthetic, ethical and social contexts. With this essential book, readers will learn from today's best practice and best thinking in design, they will develop a critical sense, and become the designers of tomorrow.