How do engineering students develop practical competencies during a period of industrial placement? - Students' perceptions

This paper explores engineering students' perceptions of developing practical competencies as experienced in their industrial placements. In addition, it discusses the criticisms in the literature on Problem Based Learning, Project Based Learning and Conceive-Design-Implement-Operate in relation to the evaluation of effective learning and teaching during placements. The paper goes on to discuss a study which examines how undergraduate engineering students develop practical competencies during their industrial placements. A phenomenological research approach is adopted using in-depth interviews and document analysis. The research findings from this PhD study will contribute to the knowledge, theory and practice for the students, the industries and the institutions of higher education as students' practical competencies are developed and graduate employability rises. In conclusion, this study explores students' experiences of developing practical competencies during industrial placements. Hence, the study should be able to contribute to a set of evidence-based guidelines for higher education institutions and industry.

An investigation into the tension arising between natural language and mathematical language experienced by mechanical engineering students

This investigation is grounded within the concept of embodied cognition where the mind is considered to be part of a biological system. A first year undergraduate Mechanical Engineering cohort of students was tasked with explaining the behaviour of three balls of different masses being rolled down a ramp. The explanations given by the students highlighted the cognitive conflict between the everyday interpretation of the word energy and its mathematical use. The results showed that even after many years of schooling, students found it challenging to interpret the mathematics they had learned and relied upon pseudo-scientific notions to account for the behaviour of the balls.

Balancing expectations in engineering education:enhancing student experiences through empirical research - a comparative analysis

This paper draws upon the findings of an empirical study comparing the expectations and concerns of engineering students with students enrolled on business and management programs. It argues that whilst the two groups of students have very similar expectations, motivations and concerns before their start their studies, once at university, engineering students are twice as likely to drop-out than are their compatriots in business studies. Drawing upon the study findings, recommendations are made as to what might be done to counteract this. The conclusion argues that there is a need for more in-depth research to be conducted in this area in order to identify the reasons behind the different attrition rates and to further enhance engineering undergraduate experience.

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.

Motivating students to learn through good and helpful coursework feedback

The 2008 National Student Survey revealed that: 44% of full-time students in England did not think that the feedback on their work had been prompt nor did they agree that the feedback on their work helped them clarify things that they did not understand (HEFCE, 2008). Computer Science and Engineering & Technology have been amongst the poorest performers in this aspect as they ranked in the lower quartile (Surridge, 2007, p.32). Five years since the first NSS survey, assessment and feedback remains the biggest concern. Dissatisfaction in any aspect of studies demotivates students and can lead to disengagement and attrition. As the student number grows, the situation can only get worse if nothing is done about it. We have conducted a survey to investigate views on assessment and feedback from Engineering, Mathematics and Computing students. The survey aims at investigating the core issues of dissatisfaction in assessment and feedback and ways in which UK Engineering students can learn better through helpful feedback. The study focuses on collecting students' experiences with feedback received in their coursework, assignments and quizzes in Computing Science modules. The survey reveals the role of feedback in their learning. The results of the survey help to identify the forms of feedback that are considered to be helpful in learning and the time frame for timely feedback. We report on the findings of the survey. We also explore ways to improve assessment and feedback in a bid to better engage engineering students in their studies.

Making mole-hills out of mountains:Peer Mentoring in Engineering education - A case-study

Based on the emergent findings of a pilot study which examined the issues around introducing Peer Mentoring into an Engineering School, this paper, which is very much a 'work in progress', describes and discusses results from the first year of what will be a three year exploratory study. Focusing on three distinctive concepts integral to the student experience, Relationships, Variety and Synergy, the study follows an Action Research Design in that it aims to find a realistic and workable solution to issues of attrition within the Engineering School in which the Project and Study are set. Starting with the research question "Does Peer Mentoring improve engineering students' transition into university?"', the Pilot Project and Study will run for three years, each year building on the lessons of the previous year.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

A quest for helpful feedback to programming coursework

The 2011 National Student Survey (NSS) revealed that 40% of full-time students in England did not think that the feedback on their work has been helpful, even though 66% of these students agreed that the feedback was detailed and 62% of them agreed that the feedback has been prompt. Detailed feedback that is not considered helpful by students means a waste of tutors' time while students continue to struggle with their learning. What do students consider as helpful feedback? What are the qualities of helpful feedback? What are the preferred forms of feedback? How should tutors write feedback so that students will find it helpful? Can ICT help to improve the quality of feedback? In our ongoing search for answers to the above questions, we have trialled the use of a novel Internet application, called eCAF, to assess programming coursework from Engineering, Mathematics and Computing students and have collected their views on the feedback received through a survey. The survey reveals that most students prefer electronic feedback as given through eCAF, with verbal feedback ranked second and hand-written feedback ranked even lower. The survey also indicates that the feedback from some tutors is considered more helpful than others. We report on the detailed findings of the survey. By comparing the kinds of feedback given by each tutor who took part in the trial, we explore ways to improve the helpfulness of feedback on programming coursework in a bid to promote learning amongst engineering students.

A quest for helpful feedback to programming coursework

The 2011 National Student Survey (NSS) revealed that 40% of full-time students in England do not think that the feedback on their work has been helpful, even though 66% of these students agreed that the feedback was detailed and 62% of them agreed that the feedback has been prompt. Detailed feedback that is not considered helpful by students means a waste of tutors' time while students continue to struggle with their learning. What do students consider as helpful feedback? What are the qualities of helpful feedback? What are the preferred forms of feedback? How should tutors write feedback so that students will find it helpful? Can ICT help to improve the quality of feedback? In our ongoing search for answers to the above questions, we have trialled the use of a novel online application (eCAF) to assess programming coursework from engineering, mathematics and computing students and, through a survey, have collected their views on the feedback received. The survey reveals that most students prefer electronic feedback as given through eCAF, with verbal feedback ranked second and hand-written feedback ranked even lower. The survey also indicates that the feedback from some tutors is considered more helpful than others. We report on the detailed findings of the survey. By comparing the kinds of feedback given by each tutor who took part in the trial, we explore ways to improve the helpfulness of feedback on programming coursework in a bid to promote learning amongst engineering students.

A descriptive structural approach to the teaching of written English to foreign students.

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Practice based learning for automotive engineering design students

The automotive industry combines a multitude of professionals to develop a modern car successfully. Within the design and development teams the collaboration and interface between Engineers and Designers is critical to ensure design intent is communicated and maintained throughout the development process. This study highlights recent industry practice with the emergence of Concept Engineers in design teams at Jaguar Land Rover Automotive group. The role of the Concept Engineer emphasises the importance of the Engineering and Design/Styling interface with the Concept engineer able to interact and understand the challenges and specific languages of each specialist area, hence improving efficiency and communication within the design team. Automotive education tends to approach design from two distinct directions, that of engineering design through BSc courses or a more styling design approach through BA and BDes routes. The educational challenge for both types of course is to develop engineers and stylist's who have greater understanding and experience of each other's specialist perspective of design and development. The study gives examples of two such courses in the UK who are developing programmes to help students widen their understanding of the engineering and design spectrum. Initial results suggest the practical approach has been well received by students and encouraged by industry as they seek graduates with specialist knowledge but also a wider appreciation of their role within the design process.

Getting round pegs into round holes:getting students onto the right engineering programme

Aston University offers a Foundation year in Engineering and Applied Science. The purpose of this programme is to prepare people with the necessary skills and knowledge required to enrol on an undergraduate programme in Engineering and Applied Science. It is acknowledged there are many misconceptions as to what engineering is. This is further compounded by the lack of knowledge of the different engineering disciplines both by pre-university students and careers teachers [1]. In order to ameliorate this lack of knowledge, Aston University offers a unique programme where students are given the opportunity to have a ?taste? of four Engineering Disciplines: Mechanical Engineering, Electrical Engineering, Chemical Engineering and Computer Science. Alongside these ?taster? sessions, the students study a Professional Skills module where they are expected to keep a portfolio of skills. In their portfolios they comment on their strengths and weakness in relation to six skill areas: independent enquirer, self-manager, effective participator, creative thinker, reflective learner and team worker. The portfolio gives them the opportunity to perform a self-skills audit and identify areas where they have strengths and areas which require work to improve to become a competent professional engineer. They also have talks from engineers who discuss with them their careers and the different aspects of engineering. The purpose of the ?taster? sessions, portfolio and the talks are to encourage the students to critically examine their career aspirations and choose an engineering undergraduate programme which best suits their ambitions and potential skills. The feedback from students has been very positive. The ?taster? sessions have enabled them to make an informed choice as to the undergraduate programme they would like to study. The programme has given them the technical skills and knowledge to enrol on an undergraduate programme and also the skills and knowledge to be a successful learner.

Using interior point algorithms for the solution of linear programs with special structural features

Linear Programming (LP) is a powerful decision making tool extensively used in various economic and engineering activities. In the early stages the success of LP was mainly due to the efficiency of the simplex method. After the appearance of Karmarkar's paper, the focus of most research was shifted to the field of interior point methods. The present work is concerned with investigating and efficiently implementing the latest techniques in this field taking sparsity into account. The performance of these implementations on different classes of LP problems is reported here. The preconditional conjugate gradient method is one of the most powerful tools for the solution of the least square problem, present in every iteration of all interior point methods. The effect of using different preconditioners on a range of problems with various condition numbers is presented. Decomposition algorithms has been one of the main fields of research in linear programming over the last few years. After reviewing the latest decomposition techniques, three promising methods were chosen the implemented. Sparsity is again a consideration and suggestions have been included to allow improvements when solving problems with these methods. Finally, experimental results on randomly generated data are reported and compared with an interior point method. The efficient implementation of the decomposition methods considered in this study requires the solution of quadratic subproblems. A review of recent work on algorithms for convex quadratic was performed. The most promising algorithms are discussed and implemented taking sparsity into account. The related performance of these algorithms on randomly generated separable and non-separable problems is also reported.

Novel biodegradable fibres for applications in tissue engineering and drug delivery

The preparation and characterisation of novel biodegradable polymer fibres for application in tissue engineering and drug delivery are reported. Poly(e-caprolactone) (PCL) fibres were produced by wet spinning from solutions in acetone under low shear (gravity flow) conditions. The tensile strength and stiffness of as-spun fibres were highly dependent on the concentration of the spinning solution. Use of a 6% w/v solution resulted in fibres having strength and stiffness of 1.8 MPa and 0.01 GPa respectively, whereas these values increased to 9.9 MPa and 0.1 GPa when fibres were produced from 20% w/v solutions. Cold drawing to an extension of 500% resulted in further increases in fibre strength (up to 50 MPa) and stiffness (0.3 GPa). Hot drawing to 500% further increased the fibre strength (up to 81 MPa) and stiffness (0.5 GPa). The surface morphology of as-spun fibres was modified, to yield a directional grooved pattern by drying in contact with a mandrel having a machined topography characterised by a peak-peak separation of 91 mm and a peak height of 30 mm. Differential scanning calorimetery (DSC) analysis of as-spun fibres revealed the characteristic melting point of PCL at around 58°C and a % crystallinity of approximately 60%. The biocompatibility of as-spun fibres was assessed using cell culture. The number of attached 3T3 Swiss mouse fibroblasts, C2C12 mouse myoblasts and human umbilical vein endothelial cells (HUVECs) on as-spun, 500% cold drawn, and gelatin coated PCL fibres were observed. The results showed that the fibres promoted cell proliferation for 9 days in cell culture and was slightly lower than on tissue culture plastic. The morphology of all cell lines was assessed on the various PCL fibres using scanning electron microscopy. The cell function of HUVECs growing on the as-spun PCL fibres was evaluated. The ability HUVECs to induce an immune response when stimulated with lipopolysaccaride (LPS) and thereby to increase the amount of cell surface receptors was assessed by flow cytometry and reverse transcription-polymerase chain reaction (RT-PCR). The results showed that PCL fibres did not inhibit this function compared to TCP. As-spun PCL fibres were loaded with 1 % ovine albumin (OVA) powder, 1% OVA nanoparticles and 5% OVA nanoparticles by weight and the protein release was assessed in vitro. PCL fibres loaded with 1 % OVA powder released 70%, 1% OVA nanoparticle released 60% and the 5% OVA nanoparticle released 25% of their protein content over 28 days. These release figures did not alter when the fibres were subjected to lipase enzymatic degradation. The OVA released was examined for structural integrity by SDS-PAGE. This showed that the protein molecular weight was not altered after incorporation into the fibres. The bioactivity of progesterone was assessed following incorporation into PCL fibres. Results showed that the progesterone released had a pronounced effect on MCF-7 breast epithelial cells, inhibiting their proliferation. The PCL fibres display high fibre compliance, a potential for controlling the fibre surface architecture to promote contact guidance effects, favorable proliferation rate of fibroblasts, myoblasts and HUVECs and the ability to release pharmaceuticals. These properties recommended their use for 3-D scaffold production in soft tissue engineering and the fibres could also be exploited for controlled presentation and release of biopharmaceuticals such as growth factors.