Computationsl modelling of dimethyl ether separation and steam reforming in fluidized bed reactors

This study presents a computational fluid dynamic (CFD) study of Dimethyl Ether (DME) gas adsorptive separation and steam reforming (DME-SR) in a large scale Circulating Fluidized Bed (CFB) reactor. The CFD model is based on Eulerian-Eulerian dispersed flow and solved using commercial software (ANSYS FLUENT). Hydrogen is currently receiving increasing interest as an alternative source of clean energy and has high potential applications, including the transportation sector and power generation. Computational fluid dynamic (CFD) modelling has attracted considerable recognition in the engineering sector consequently leading to using it as a tool for process design and optimisation in many industrial processes. In most cases, these processes are difficult or expensive to conduct in lab scale experiments. The CFD provides a cost effective methodology to gain detailed information up to the microscopic level. The main objectives in this project are to: (i) develop a predictive model using ANSYS FLUENT (CFD) commercial code to simulate the flow hydrodynamics, mass transfer, reactions and heat transfer in a large scale dual fluidized bed system for combined gas separation and steam reforming processes (ii) implement a suitable adsorption models in the CFD code, through a user defined function, to predict selective separation of a gas from a mixture (iii) develop a model for dimethyl ether steam reforming (DME-SR) to predict hydrogen production (iv) carry out detailed parametric analysis in order to establish ideal operating conditions for future industrial application. The project has originated from a real industrial case problem in collaboration with the industrial partner Dow Corning (UK) and jointly funded by the Engineering and Physical Research Council (UK) and Dow Corning. The research examined gas separation by adsorption in a bubbling bed, as part of a dual fluidized bed system. The adsorption process was simulated based on the kinetics derived from the experimental data produced as part of a separate PhD project completed under the same fund. The kinetic model was incorporated in FLUENT CFD tool as a pseudo-first order rate equation; some of the parameters for the pseudo-first order kinetics were obtained using MATLAB. The modelling of the DME adsorption in the designed bubbling bed was performed for the first time in this project and highlights the novelty in the investigations. The simulation results were analysed to provide understanding of the flow hydrodynamic, reactor design and optimum operating condition for efficient separation. Bubbling bed validation by estimation of bed expansion and the solid and gas distribution from simulation agreed well with trends seen in the literatures. Parametric analysis on the adsorption process demonstrated that increasing fluidizing velocity reduced adsorption of DME. This is as a result of reduction in the gas residence time which appears to have much effect compared to the solid residence time. The removal efficiency of DME from the bed was found to be more than 88%. Simulation of the DME-SR in FLUENT CFD was conducted using selected kinetics from literature and implemented in the model using an in-house developed user defined function. The validation of the kinetics was achieved by simulating a case to replicate an experimental study of a laboratory scale bubbling bed by Vicente et al [1]. Good agreement was achieved for the validation of the models, which was then applied in the DME-SR in the large scale riser section of the dual fluidized bed system. This is the first study to use the selected DME-SR kinetics in a circulating fluidized bed (CFB) system and for the geometry size proposed for the project. As a result, the simulation produced the first detailed data on the spatial variation and final gas product in such an industrial scale fluidized bed system. The simulation results provided insight in the flow hydrodynamic, reactor design and optimum operating condition. The solid and gas distribution in the CFB was observed to show good agreement with literatures. The parametric analysis showed that the increase in temperature and steam to DME molar ratio increased the production of hydrogen due to the increased DME conversions, whereas the increase in the space velocity has been found to have an adverse effect. Increasing temperature between 200 oC to 350 oC increased DME conversion from 47% to 99% while hydrogen yield increased substantially from 11% to 100%. The CO2 selectivity decreased from 100% to 91% due to the water gas shift reaction favouring CO at higher temperatures. The higher conversions observed as the temperature increased was reflected on the quantity of unreacted DME and methanol concentrations in the product gas, where both decreased to very low values of 0.27 mol% and 0.46 mol% respectively at 350 °C. Increasing the steam to DME molar ratio from 4 to 7.68 increased the DME conversion from 69% to 87%, while the hydrogen yield increased from 40% to 59%. The CO2 selectivity decreased from 100% to 97%. The decrease in the space velocity from 37104 ml/g/h to 15394 ml/g/h increased the DME conversion from 87% to 100% while increasing the hydrogen yield from 59% to 87%. The parametric analysis suggests an operating condition for maximum hydrogen yield is in the region of 300 oC temperatures and Steam/DME molar ratio of 5. The analysis of the industrial sponsor’s case for the given flow and composition of the gas to be treated suggests that 88% of DME can be adsorbed from the bubbling and consequently producing 224.4t/y of hydrogen in the riser section of the dual fluidized bed system. The process also produces 1458.4t/y of CO2 and 127.9t/y of CO as part of the product gas. The developed models and parametric analysis carried out in this study provided essential guideline for future design of DME-SR at industrial level and in particular this work has been of tremendous importance for the industrial collaborator in order to draw conclusions and plan for future potential implementation of the process at an industrial scale.

Identifying capacity building cluster impact in the West Midlands

specific themes in Energy, Health Technologies and Finance via KTP (6), CASE (18), Placement (6) and Voucher (3) projects across the themes. Through the analysis of responses to an assessment questionnaire, reports from and interviews with a number of researchers, academics and industry sponsors engaged in KTP, CASE, and Placement projects we attempt to identify, analyse and assess the impact of these research projects. We adopt the Research Councils UK (RCUK) definition of research impact as 'the demonstrable contribution that excellent research makes to society and the economy'. In addition to identifying academic impact, we identify evidence of social and economic impact, for example, that it has been taken up and used by policy makers, and practitioners and has led to improvements in services or business. Helpful and un-helpful factors, identified during the execution of the research projects, are also considered.

Project financing 8th edition

The eighth edition is a fundamental and essential update to the seventh edition published in 2000. This new edition examines a comprehensive range of existing and newer topics that are relevant to project financing in 2012 and explores current trends in the project finance and leasing industries. Contributors are experienced academics and practitioners. Since the first edition was published, the financial markets have undergone tremendous upheavals and many new structures and instruments have been created to meet the financing needs of business. This edition considers the wider world of project finance, applicable to such diverse situations as venture capital and leveraged buyouts, and using new approaches such as Islamic finance techniques. The eighth edition is an essential and over-due update to the previous edition published in 2000. The eighth edition updates a comprehensive review of financial and related topics which are relevant to project financing in 2012 and explores current trends in financial modelling of a project, risk management and the private finance initiatives. This is a comprehensive and practical book full of advice and tips for successful project financing, including leasing, offering a clear, easy to understand guide to a complex area with examples. The topic coverage is well organized and complete moving from the fundamentals to the more complex issues. There is an extensive glossary to support readers. Finally the use of 12 practitioner case studies brings many of these complex issues to life. This is the new edition of the clear, easy-to-understand industry-standard text on project financing. With a good overview of a broad area and using principles of project financing to explain complex structures, this book includes lots of examples and case studies (including Eurotunnel, Dabhol, multiple Paiton deals and other recent deals along with subsequent developments) to show the concepts in use, examine outcomes and to ensure you understand important issues such as effective project structuring and financing, financial modelling for project valuation, and risk management. Substantially updated and expanded to provide the latest developments in all aspects of project financing. An important manual reference, this book is a must-have for every project financier's desk. The text unites the domain of project financing with a wealth of project management techniques, supported by diagrams and charts and other pictorial features, where appropriate. All these supporting features facilitate a better understanding of the accompanying text for the reader. In many chapters there are diagrams to clarify the specific transaction structure discussed in the accompanying text. These diagrams enable the reader to get a very clear idea of the transaction structure, which is particularly useful where it is complex or unusual. There are also a number of checklists to assist stakeholders in the project and resource management of complex project financings. The new financial modelling chapters allow exploration of some of the pitfalls project models encounter, challenging the accurate replication of the project cash flows for stakeholders to evaluate. In the later new risk management chapters, worked examples are included to illustrate the techniques in practice. The new public private partnership/private finance initiatives chapter introduces readers to this new approach to public projects. References are made to useful websites throughout the text. Cases are included at the end of the main text to encourage examination of real-life examples of project financing in practice and also highlight specific issues of current interest. The book will be helpful to project finance sponsors, lawyers, host governments, bankers and providers of capital

CLAE to move to online format

Editorial: The 2015 BCLA annual conference was another fantastic affair. It was the first time the conference was held in the beautiful city of Liverpool. The venue was great and the programme was excellent. The venue overlooked the River Mersey and many of the hotels were local boutique hotels. I stayed in one which was formerly the offices of White Star Liners—where the RMS Titanic was originally registered. The hotel decor was consistent with its historic significance. The BCLA gala dinner was held in the hugely impressive Anglican Cathedral with entertainment from a Beatles tribute band. That will certainly be a hard act to follow at the next conference in 2017. Brian Tompkins took the reigns as the new BCLA president. Professor Fiona Stapleton was the recipient of the BCLA Gold Medal Award. The winner of the poster competition was Dorota Szczesna-Iskander with a poster entitled ‘Dry Contact lens poor wettability and visual performance’. Second place was Renee Reeder with her poster entitled ‘Abnormal Rosacea as a differential diagnosis in corneal scarring’. And third place was Maria Jesus Gonzalez-Garcia with her poster entitled ‘Dry Effect of the Environmental Conditions on Tear Inflammatory Mediators Concentration in Contact Lens Wearers’. The photographic competition winner was Professor Wolfgang Sickenberger from Jena in Germany. The Editorial Panel of CLAE met at the BCLA conference for their first biannual meeting. The journal metrics were discussed. In terms of number of submissions of new papers CLAE seems to have plateaued after seeing a rapid growth in the number of submissions over the last few years. The increase over the last few years could be attributed to the fact that CLAE was awarded an impact factor for the first time in 2012. This year it seems that impact factors across nearly all ophthalmic related journals has dropped. This could in part be due to the fact that last year was a ‘Research Exercise Framework (REF) year for UK universities, where they are judged on quality of their research output. The next REF is in 2020 so we may see changes nearing that time. Looking at article downloads, there seems to be a continued rise in figures. Currently CLAE attracts around 85,000 downloads per year (this is an increase of around 10,000 per year for the last few years) and the 2015 prediction is 120,000! With this in mind and with other contributing factors too, the BCLA has decided to move to online delivery of CLAE to its members starting from issue 5 of 2015. Some members do like to flick through the pages of a hard copy of the journal so members will still have the option of receiving a hard copy through the post but the default journal delivery method will now be online. The BCLA office will send various alerts and content details to members email addresses. To access CLAE online you will need to log in via the BCLA web page, currently you then click on ‘Resources’ and then under ‘Free and Discounted Publications’ you will see CLAE. This actually takes you to CLAE’s own webpage (www.contactlensjournal.com) but you need to log in via the BCLA web page. The BCLA plans to change these weblinks so that from the BCLA web page you can link to the journal website much more easily and you have the choice of going directly into the general website for CLAE or straight to the current issue. In 2016 you will see an even easier way of accessing CLAE online as the BCLA will launch a CLAE application for mobile devices where the journal can be downloaded as a ‘flick-book’. This is a great way of bringing CLAE into the modern era where people access their information in newer ways. For many the BCLA conference was part of a very busy conference week as it was preceded by the International Association of Contact Lens Educators’ (IACLE) Third World Congress, held in Manchester on the 4 days before the BCLA conference. The first and second IACE World Congresses were held in Waterloo, Canada in 1994 and 2000 respectively and hosted by Professor Des Fonn. Professor Fonn was the recipient of the first ever IACLE lifetime achievement award. The Third IACLE World Congress saw more than 100 contact lens educators and industry representatives from around 30 countries gather in the UK for the four-day event, hosted by The University of Manchester. Delegates gained hands-on experience of innovations in teaching, such as learning delivery systems, the use of iPads in the classroom and for creating ePub content, and augmented and virtual reality technologies. IACLE members around the world also took part via a live online broadcast. The Third IACLE World Congress was made possible by the generous support of Sponsors Alcon, CooperVision and Johnson & Johnson Vision Care., for more information look at the IACLE web page (www.iacle.org).

Consumers' responses to sponsorship by foreign companies

Purpose: The study aims to explore the novel issue of how consumers perceive sponsorship initiatives by foreign companies and how the sponsors' country-of-origin (COO) cue may influence sponsorship outcomes. Design/methodology/approach: The measurement model and proposed relationships were tested based on a sample of 811 Chinese consumers using confirmatory factor analysis and structural path analysis. Findings: The results reveal that attitudes toward the sponsor completely mediate the effect of event involvement on willingness to buy from the sponsor (WBS). Attitudes toward the sponsor also partially mediate the relationship between economic animosity towards a specific sponsor's COO and WBS. Additionally, the level of a country's economic competitiveness found to moderate the negative relationship between economic animosity, attitudes toward the sponsor and WBS. Research limitations/implications: The nature of the product type and the desire of the consumer to own such a product may have influenced the measurement of willingness to buy. Practical implications: The research adds to the existing knowledge by identifying the opportunities and potential biases that a foreign company may encounter when considering sponsoring a mega sport event in a different cultural context. The study helps managers to understand how sports sponsorship could be used effectively in emerging markets. Originality/value: The proposed conceptual model advances the application of classical conditioning theory, the consumer animosity model of foreign product purchase and the belief-attitude-intention hierarchy in the sponsorship arena. It is the first investigation of the role of event involvement and economic animosity in understanding sponsorship responses. © Emerald Group Publishing Limited.

Effectiveness of Olympic sponsorship by foreign and domestic companies: the influential role of consumer ethnocentrism

This study investigates Chinese consumers' responses to foreign and domestic sponsors engaged in the Beijing Olympic Games. It identifies direct causal relationships between consumer ethnocentrism, attitudes towards the sponsor and product judgement. Findings reveal that event involvement mediates the positive relationship between consumer ethnocentrism and attitudes towards the domestic sponsor. Attitudes towards foreign sponsors are found to be a significant mediator in the relationship between consumer ethnocentrism and judgements of the sponsors' products. Theoretical and managerial implications are discussed.