An appraisal of employment problems and policies at the micro-economic level

This study has concentrated on the development of an impact simulation model for use at the sub-national level. The necessity for the development of this model was demonstrated by the growth of local economic initiatives during the 1970's, and the lack of monitoring and evaluation exercise to assess their success and cost-effectiveness. The first stage of research involved the confirmation that the potential for micro-economic and spatial initiatives existed. This was done by identifying the existence of involuntary structural unemployment. The second stage examined the range of employment policy options from the macroeconomic, micro-economic and spatial perspectives, and focused on the need for evaluation of those policies. The need for spatial impact evaluation exercise in respect of other exogenous shocks, and structural changes was also recognised. The final stage involved the investigation of current techniques of evaluation and their adaptation for the purpose in hand. This led to a recognition of a gap in the armoury of techniques. The employment-dependency model has been developed to fill that gap, providing a low-budget model, capable of implementation at the small area level and generating a vast array of industrially disaggregate data, in terms of employment, employment-income, profits, value-added and gross income, related to levels of United Kingdom final demand. Thus providing scope for a variety of impact simulation exercises.

Classification and contextual enhancement of remotely sensed data

The aims of the project were twofold: 1) To investigate classification procedures for remotely sensed digital data, in order to develop modifications to existing algorithms and propose novel classification procedures; and 2) To investigate and develop algorithms for contextual enhancement of classified imagery in order to increase classification accuracy. The following classifiers were examined: box, decision tree, minimum distance, maximum likelihood. In addition to these the following algorithms were developed during the course of the research: deviant distance, look up table and an automated decision tree classifier using expert systems technology. Clustering techniques for unsupervised classification were also investigated. Contextual enhancements investigated were: mode filters, small area replacement and Wharton's CONAN algorithm. Additionally methods for noise and edge based declassification and contextual reclassification, non-probabilitic relaxation and relaxation based on Markov chain theory were developed. The advantages of per-field classifiers and Geographical Information Systems were investigated. The conclusions presented suggest suitable combinations of classifier and contextual enhancement, given user accuracy requirements and time constraints. These were then tested for validity using a different data set. A brief examination of the utility of the recommended contextual algorithms for reducing the effects of data noise was also carried out.

Genetic characterization of clinical isolates of Clostridium difficile using an optimized RAPD protocol and PCR ribotyping reveals strain diversity between two tertiary referral Trusts in the West Midlands, UK

Epidemiological investigations of Clostridium difficile often focus on differences between separate geographical areas. In this investigation, two populations of C. difficile recovered from separate tertiary referral Trusts within the West Midlands, UK, were characterized using both PCR ribotyping and an optimized RAPD (random amplification of polymorphic DNA) protocol. The PCR ribotyping and RAPD methodologies identified differences between the two C. difficile populations, in both the prevalence and the diversity of types identified. The use of PCR ribotyping in conjunction with RAPD further categorized different types within defined PCR ribotypes, identifying different types within the same PCR ribotype and therefore providing a greater discriminatory power than either of the methods when used alone. The differences observed in this study between the two Trusts in the distribution of both RAPD 'type' and PCR ribotype demonstrate the diversity that is present amongst isolates of C. difficile within a relatively small geographical area and warrants a need for further investigation into the local epidemiology of C. difficile.

Area summation and masking

At detection threshold, sensitivity improves as the area of a test grating increases, but not when the test is placed on a pedestal and the task becomes contrast discrimination (G. E. Legge, & J. M. Foley, 1980). This study asks whether the abolition of area summation is specific to the situation where mask and test stimuli have the same spatial frequency and orientation ("within-channel" masking) or is more general, also occurring when mask and test stimuli are very different ("cross-channel" masking). Threshold versus contrast masking functions were measured where the test and mask were either both small (SS), both large (LL), or small and large, respectively (SL). For within-channel masking, facilitation and area summation were found at low mask contrasts, but the results for SS and LL converged at intermediate contrasts and above, replicating Legge and Foley (1980). For all three observers, less facilitation was found for SL than for SS. For cross-channel masking, area summation occurred across the entire masking function and results for SS and SL were identical. The results for the entire data set were well fit by an extended version of a contrast masking model (J. M. Foley, 1994) in which the weights of excitatory and suppressive surround terms were free parameters. I conclude that (i) there is no empirical abolition of area summation for cross-channel masking, (ii) within-channel area summation can be abolished empirically without being disabled in the model, (iii) observers are able to restrict the area of spatial integration, but not suppression, (iv) extending a cross-channel mask to the surround has no effect on contrast detection, and (v) there is a formal similarity between area summation and contrast adaptation. © 2004 ARVO.

Some aspects of the microbiological properties of polymers and composite materials

The interaction of microorganisms with glass-reinforced polyester resins(GRP), both under laboratory and simulated operating conditions, has been examined following reports of severl! fungal biodeterioration. Although GRP was not previously associated with substantial microbial growth, small amounts of microbial activity would pose problems for products associated with comestible materials. The microbiology of the raw materials was investigated, two ingredients were supportive to microbial populations whilst five materials were biostatic or inhibitory in their action. Production laminate was not susceptible to microbial deterioration or inhibitory to microbes. Incorporation of zinc stearate, one of the supportive ingredients, at 300% manufacturing level or drastic undercuring produced laminate capable of supporting microbial growth but only after a non-biotic stage of degradation. Study of the long-term population dynamics of cisterns of GRP and competitive materials under conditions simulating in-service conditions, monitoring microbial numbers within the experimental vessels and comparing with the populations of the supply water, suggests that the performance of GRP cisterns is slightly superior to conventional competitive materials. An investigation of the biological performance of GRP cisterns in an isolated area of known microbiological hazard was conducted. Severe biodeterioration had been experienced with Preform GRP articles moulded using different production techniques, but substitution of current GRP articles resulted in no recurrence of the problem. All attempts to establish the fungal isolate responsible for the phenomena in cisterns under controlled conditions failed. Scanning Electron Microscopy of GRP surfaces showed that although differences exist between current and Preform laminates, these could not satisfactorily explain the differences in service behaviour. These results and the results of the British Plastics Federation Expert Working Group interlaboratory study are discussed in relation to the original report of gross fungal biodeterioration and, to the design of future testing programmes for the products of industrial concerns.

Volcanogenic mineralisation in the limestone lake area, Saskatchewan, Canada

This thesis describes the geology, geochemistry and mineralogy of a Lower Proterozoic, metamorphosed volcanogenic Cu-Zn deposit, situated at the western end of the Flin Flon greenstone belt. Stratabound copper mineralisation occurs in silicified and chloritoid-bearing alteration assemblages within felsic tuffs and is mantled by thin (< 3m) high-grade sphalerite layers. Mineralisation is underlain by garnet-hornblende bearing Lower Iron Formation (LIF), and overlain by garnet-grunerite bearing Upper Iron Formation (UIF). Distinctive trace element trends, involving Ti and Zr, in mineralised and footwall felsic tuffs are interpreted to have formed by fractionation associated with a high-level magma chamber in a caldera-type environment. Discrimination diagrams for basaltic rocks are interpreted to indicate their formation in an environment similar to that of recent, primitive, tholeiitic island arcs. Microprobe studies of key mineral phases demonstrate large and small scale chemical variations in silicate phases related to primary lithological, rather than metamorphic, controls. LIF is characterised by alumino-ferro-tschermakite and relatively Mn-poor, Ca-rich garnets, whereas UIF contains manganoan grunerite and Mn-rich garnets. Metamorphic mineral reactions are considered and possible precursor assemblages identified for garnet-, and chloritoid-bearing rocks. Chloritoid-bearing rocks are interpreted as the metamorphosed equivalents of iron-rich feeder zones formed near the surface. The iron-formations are thought to represent iron-rich sediments formed on the sea floor formed from the venting of the ore fluids. Consideration of various mineral assemblages leads to an estimate for peak metamorphic conditions of 450-500oC and > 4Kb total pressure. Comparisons with other volcanogenic deposits indicate affinities with deposits of `Mattabi-type' from the Archean of Ontario. An extrapolation of the main conclusions of the thesis to adjacent areas points to the presence of a number of geologically similar localities with potential for mineralisation.

Place, ethnicity and poverty in England’

Examination of the relationship between ethnicity, poverty and place has tended to focus on the spatial distribution of minority ethnic groups. This summary paper reviews some key themes in this literature, in order to review the following key questions: •Where are different ethnic groups located, and how does this location relate to their experience of poverty? •Is clustering a good or bad thing, and what is the role of location – regardless of concentration – in terms of impacts on access to housing, employment, and other resources? However, it is notable that existing research in this area continues to present ethnicity as a factor that shapes outcomes only for minority ethnic groups. A wider discussion increasingly recognises the working of ethnicity in the lives of majority communities. Some of the most consistently impoverished areas in Britain, for example, are in regions with relatively small minority ethnic communities. For example, examinations of poverty in Cornwall (Cemlyn, et al., 2002) and Wales (Kenway and Palmer, 2007) identify longstanding concentrations of poverty and social exclusion among relatively static populations. Instead of assuming that ethnic identity influences propensity to poverty when concentrated in particular places, the experiences of Cornwall and Wales encourage us to consider the manner in which places of poverty also have an ethnic character and the impact of this in the wider experience of poverty. In what follows, and in order to reflect the existing literature, we review key points in the debate about the spatial concentration of minority ethnic groups and the impact of this concentration on experiences of poverty. Where possible, we seek to extend these ideas to consider possible implications for spaces of poverty characterised by concentrations of majority ethnic groups.

Energy efficient radio access architectures for green radio:large versus small cell size deployment

In this paper new architectural approaches that improve the energy efficiency of a cellular radio access network (RAN) are investigated. The aim of the paper is to characterize both the energy consumption ratio (ECR) and the energy consumption gain (ECG) of a cellular RAN when the cell size is reduced for a given user density and service area. The paper affirms that reducing the cell size reduces the cell ECR as desired while increasing the capacity density but the overall RAN energy consumption remains unchanged. In order to trade the increase in capacity density with RAN energy consumption, without degrading the cell capacity provision, a sleep mode is introduced. In sleep mode, cells without active users are powered-off, thereby saving energy. By combining a sleep mode with a small-cell deployment architecture, the paper shows that the ECG can be increased by the factor n = (R/R) while the cell ECR continues to decrease with decreasing cell size.

Phenotypic effect of mutations in evolving populations of RNA molecules

Background. The secondary structure of folded RNA sequences is a good model to map phenotype onto genotype, as represented by the RNA sequence. Computational studies of the evolution of ensembles of RNA molecules towards target secondary structures yield valuable clues to the mechanisms behind adaptation of complex populations. The relationship between the space of sequences and structures, the organization of RNA ensembles at mutation-selection equilibrium, the time of adaptation as a function of the population parameters, the presence of collective effects in quasispecies, or the optimal mutation rates to promote adaptation all are issues that can be explored within this framework. Results. We investigate the effect of microscopic mutations on the phenotype of RNA molecules during their in silico evolution and adaptation. We calculate the distribution of the effects of mutations on fitness, the relative fractions of beneficial and deleterious mutations and the corresponding selection coefficients for populations evolving under different mutation rates. Three different situations are explored: the mutation-selection equilibrium (optimized population) in three different fitness landscapes, the dynamics during adaptation towards a goal structure (adapting population), and the behavior under periodic population bottlenecks (perturbed population). Conclusions. The ratio between the number of beneficial and deleterious mutations experienced by a population of RNA sequences increases with the value of the mutation rate µ at which evolution proceeds. In contrast, the selective value of mutations remains almost constant, independent of µ, indicating that adaptation occurs through an increase in the amount of beneficial mutations, with little variations in the average effect they have on fitness. Statistical analyses of the distribution of fitness effects reveal that small effects, either beneficial or deleterious, are well described by a Pareto distribution. These results are robust under changes in the fitness landscape, remarkably when, in addition to selecting a target secondary structure, specific subsequences or low-energy folds are required. A population perturbed by bottlenecks behaves similarly to an adapting population, struggling to return to the optimized state. Whether it can survive in the long run or whether it goes extinct depends critically on the length of the time interval between bottlenecks. © 2010 Stich et al; licensee BioMed Central Ltd.

Purchasing green transport and logistics services:implications for small business

Considering its strong environmental impact, logistics plays a critical role in green supply chain management. It provides strategic links in the supply chain and is an essential function in the delivery of green products to the consumer. There is a general consensus on the fact that more environmentally sustainable companies may be achieved only if transport and logistics activities also become greener. To achieve this objective, buyer companies need to incorporate green considerations in the purchasing of transport and logistics services. This appears particularly challenging for small and medium sized enterprises (SMEs) because of their traditional lack of managerial, organisational and financial resources that often result in failure to adopt an environmental perspective. In the extant literature, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. However, little has been written in relation to purchasing green transport and logistics services. The aim of this paper is to explore practices in the buying of green transport and logistics services and to derive implications for small buyer companies. The paper analyses how general environmental company ambitions and environmental purchasing practices are reflected when green transport and logistics services are purchased in three different European countries (Italy, Ireland and Sweden) using a multiple case study research approach. The results of the paper indicate that while the case companies show a relatively high concern for green issues at corporate level, a lower importance is attributed to green issues at the purchasing function level. When green concerns in the purchasing of transport and logistics services are analysed the level of importance decreases further. Thus, a conflicting attitude is evident between the overall corporate level and the purchasing of transport and logistics services specifically. This suggests that there is potential for improvement especially in the area of green collaboration in buyer and supplier relationships.

SME resilience to extreme weather events:important initiatives for informing policy making in the area

Enhancing the resilience of local communities to weather extremes has gained significant interest over the years, amidst the increased intensity and frequency of such events. The fact that such weather extremes are forecast to further increase in number and severity in future has added extra weight to the importance of the issue. As a local community consists of a number of community groups such as households, businesses and policy makers, the actions of different community groups in combination will determine the resilience of the community as a whole. An important role has to be played by Small and Medium-sized Enterprises (SMEs); which is an integral segment of a local community in the UK, in this regard. While it is recognised that they are vital to the economy of a country and determines the prosperity of communities, they are increasingly vulnerable to effects of extreme weather. This paper discusses some of the exploratory studies conducted in the UK on SMEs and their ability to cope with extreme weather events, specifically flooding. Although a reasonable level of awareness of the risk was observed among the SMEs, this has not always resulted in increased preparedness even if they are located in areas at risk of flooding. The attitude and the motivation to change differed widely between SMEs. The paper presents schemas by which the SMEs can identify their vulnerability better so that they can be populated among a community of SMEs, which can be taken forward to inform policy making in this area. Therefore the main contribution the paper makes to the body of knowledge in the area is a novel way to communicate to SMEs on improving resilience against extreme weather, which will inform some of the policy making initiatives in the UK.

Putting policy initiatives into practice:adopting an “honest broker” approach to adapting small businesses against flooding

Purpose: Amidst the current economic climate, which places many constraints on expensive flood defence schemes, the policy makers tend to favour schemes that are sympathetic to the needs of small and medium-sized enterprises (SMEs) and which promote empowering local communities based on their individual local contexts. Research has shown that although several initiatives are in place to create behavioural change among SMEs in undertaking adaptation approaches against flooding, they often tend to delay their responses by means of a "wait and see" attitude. The paper aims to discuss these issues. Design/methodology/approach: This paper argues that unless there are conscious efforts in the policy-making community to undertake explicit measures to engage with SMEs in a collaborative way, the uptake of adaptation measures will not be achieved as intended. With the use of the "honest broker" approach the paper provides a conceptual way forward of how a sense of collaboration can be instigated in an engagement process between the policy makers and SMEs, so that the scientific knowledge is translated in an appropriately rational way, which best meets the expectations of the SMEs. Findings: The paper proposes a conceptual model for engaging SMEs that will potentially increase the uptake of flood adaptation measures by SMEs. This could be a useful model with which to kick start a collaborative engagement process that could escalate to wider participation in other areas to improve impact of policy initiatives. Originality/value: The paper lays the conceptual foundation for a new theoretical base in the area, which will encourage more empirical investigations that will potentially enhance the practicality of some of the existing policies. © Emerald Group Publishing Limited.

A case study analysis on information and communication technology usage in small logistics service companies

The impact of ICT (information and communications technology) on the logistics service industry is reshaping its organisation and structure. Within this process, the nature of changes resulting from ICT dissemination in small 3PLs (third party logistics providers) is still unclear, although a large number of logistics service markets, especially in the EU context, are populated by a high number of small 3PLs. In addition, there is still a gap in the literature where the role of technological capability in small 3PLs is seriously underestimated. This gives rise to the need to develop investigation in this area. The paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

Technology influences on small logistics providers:a case study analysis

ICT has triggered many changes in the logistics service industry. New technology is reshaping the organisation and structure of this industry as ICT impacts significantly on the operations of 3PLs. Within this process, while large 3PLs are gaining substantial benefits from technology usage, the nature of changes resulting from ICT usage in small 3PLs remains unclear. This is critical particularly for those markets populated by a high number of small 3PLs such as the Italian logistics industry. From the research point of view, there is still a gap in the literature where the role of technological capability in small 3PLs are seriously underestimated. This gives rise to the need to develop investigation in this area. This paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

An exploratory study of ICT usage in small logistics service providers

Information and communication technology (ICT) developments have strongly affected supply chain management (SCM) in recent years. ICT has had a great impact on all supply chain processes including planning, purchasing, production management, stock management, physical distribution and related integration management. Technology has become an important dimension of third party logistics (3PL) service supply as competitive advantage increasingly depends on the ability to create value for customers through the effective application of ICT. Within this process, while large 3PLs are gaining substantial benefits from technology usage and implementation, the magnitude of changes spurred by ICT dissemination in small logistics service providers remains unclear. This is reflected by the existing gap in literature where the role and competitive developing processes of small 3PLs are seriously underestimated. This gives rise to the need to develop research and investigation in this particular area. The objective of this paper is to narrow the knowledge gap in the field of ICT adoption in small 3PLs through an empirical investigation. It presents the results of a survey on a sample of small Italian 3PLs.