Internal service quality and its impact on external service quality:a study of the role of internal customer types and the dimensions which are used to assess internal suppliers within an organisation and how this affects external service quality

This research explores the role of internal customers in the delivery of external service quality. It will consider any potentially different internal customer types that may exist within the organisation. Additionally, it will explore any potential differences in the dimensions that are used to measure service quality internally and externally. If there are different internal customer types then there may be different dimensions which are used to measure service quality between these types and this will be considered also. The approach adopted given the depth and breadth of understanding required, was an action research case based approach. The research objectives were:(i) To determine the dimensions of internal service quality between internal customer supplier cells. (ii) To determine what variation, if any, there is in the dimension sets between internal customer supplier cells. (iii) To determine any ranking in the dimensions that could exist by internal customer supplier cell type. (iv) To investigate the impact of internal service quality on external service quality over time. The research findings were: (i) The majority of the dimensions used in measuring external service quality were also used internally. There were additions of new dimensions however and some dimensions which were used externally, for internal use, had to be redefined. (ii) Variation in dimension sets were revealed during the research. Four different dimension sets were identified and these were matched with four different types of internal service interaction. (iii) Differences in the ranking of dimensions within each dimension set for each internal customer supplier cell type were confirmed. (iv) Internal service quality was seen to influence external service quality but at a cellular level rather than company level. At the company level, the average internal service quality at the start and finish of the research showed no improvement but external service quality had improved. Further investigation at the cellular level showed that improvements in internal service quality had occurred. Those improvements were found to be with the cells that were closest to the customer.The research implications were found to be: (i) some cells may not be necessary in the delivery of external service quality. (ii) The immediacy of the cell to the external customer and number of interactions into and out of that cell has the greatest effect on external customer satisfaction. (iii) Internal service quality may be driven by the customer affecting those cells at the front end of the business first. This then cascades back to those cells which are less immediate until ultimately the whole organisation shows improvements in internal service quality.

The role of the sales employee in securing customer satisfaction

Purpose: Previous research has emphasized the pivotal role that salespeople play in customer satisfaction. In this regard, the relationship between salespeople's attitudes, skills, and characteristics, and customer satisfaction remains an area of interest. The paper aims to make three contributions: first, it seeks to examine the impact of salespeople's satisfaction, adaptive selling, and dominance on customer satisfaction. Second, this research aims to use dyadic data, which is a better test of the relationships between constructs since it avoids common method variance. Finally, in contrast to previous research, it aims to test all of the customers of salespeople rather than customers selected by salespeople. Design/methodology/approach: The study employs multilevel analysis to examine the relationship between salespeople's satisfaction with the firm on customer satisfaction, using a dyadic, matched business-to-business sample of a large European financial service provider that comprises 188 customers and 18 employees. Findings: The paper finds that customers' evaluation of service quality, product quality, and value influence customer satisfaction. The analysis at the selling firm's employee level shows that adaptive selling and employee satisfaction positively impact customer satisfaction, while dominance is negatively related to customer satisfaction. Practical implications: Research shows that customer-focus is a key driver in the success of service companies. Customer satisfaction is regarded as a prerequisite for establishing long-term, profitable relations between company and customer, and customer contact employees are key to nurturing this relationship. The role of salespeople's attitudes, skills, and characteristics in the customer satisfaction process are highlighted in this paper. Originality/value: The use of dyadic, multilevel studies to assess the nature of the relationship between employees and customers is, to date, surprisingly limited. The paper examines the link between employee attitudes, skills, and characteristics, and customer satisfaction in a business-to-business setting in the financial service sector, differentiating between customer- and employee-level drivers of business customer satisfaction.

The relationship between transformational leadership and customer-orientated boundary-spanning behaviours:examining the role of compassion

Customer-oriented boundary-spanning behaviours (COBSBs) are critical to the success of service organisations. Transformational leadership, with its emphasis on the social elements of the leader-subordinate dyad, is a likely antecedent to COBSBs. Similarly, the interpersonal nature of services suggests leader compassion could have a significant effect on the saliency of the relationship between transformational leadership and COBSBs. This paper reports on a study of the moderating effect of leader compassion on the relationship between transformational leadership and COBSBs (service delivery behaviours, internal influence and external representation). Transformational leadership and compassion both have significant and positive influences on COBSBs. However, compassion plays no moderating role. These findings are discussed and avenues for further research are proposed.

Managing the quality, value and impact of academic libraries: the role of external standards

Purpose – The purpose of this paper is to explore the role and relevance of external standards in demonstrating the value and impact of academic library services to their stakeholders. Design/methodology/approach – Two UK standards, Charter Mark and Customer Service Excellence, are evaluated via an exploratory case study, employing multiple data collection techniques. Methods and results of phases 1-2 of a three phase research project are outlined. Findings – Despite some limitations, standards may assist the manager in demonstrating the value, impact and quality of academic libraries in a recessional environment. Active engagement and partnership with customers is imperative if academic libraries are to be viewed as vital to their parent organisations and thus survive. Originality/value – This paper provides a systematic evaluation of the role of external accreditation standards in measuring academic library service value and impact.

The strategic role of relational capabilities in the business-to-business service profit chain

This paper extends the original service profit chain by examining the role of relational capabilities with employees, customers and strategic partners on process and performance outcomes in a business-to-business context. More specifically, we demonstrate how satisfied and loyal employees are better in developing relationships with customers and strategic partners. These relationships enable firms to be more responsive towards customers and become more innovative, which increase customer satisfaction and loyalty and, ultimately, financial performance. Our results provide support for the development of relational capabilities in a business-to-business environment by extending the service profit chain (SPC) model. However, we find that while the development of strong customer relationships contributes to an improved service responsiveness of the firm, strategic partners do not.

Perils of managing the service profit chain:the role of time lags and feedback loops

The tendency of managers to focus on short-term results rather than on sustained company success is of particular importance to retail marketing managers, because marketing activities involve expenditures which may only pay off in the longer term. To address the issue of myopic management, our study shows how the complexity of the service profit chain (SPC) can cause managers to make suboptimal decisions. Hence, our paper departs from past research by recognizing that understanding the temporal interplay between operational investments, employee satisfaction, customer satisfaction, and operating profit is essential to achieving sustained success. In particular, we intend to improve understanding of the functioning of the SPC with respect to time lags and feedback loops. Results of our large-scale longitudinal study set in a multi-outlet retail chain reveal time-lag effects between operational investments and employee satisfaction, as well as between customer satisfaction and performance. These findings, along with evidence of a negative interaction effect of employee satisfaction on the relationship between current performance and future investments, show the substantial risk of mismanaging the SPC. We identify specific situations in which the dynamic approach leads to superior marketing investment decisions, when compared to the conventional static view of the SCP. These insights provide valuable managerial guidance for effectively managing the SPC over time. © 2012 New York University.

The role of emotional labour and role stress on burnout and psychological strain in high contact service employees

This study examines the relationships between job demands (in the form of role stressors and emotional management) and employee burnout amongst high contact service employees. Employees in customer facing roles are frequently required to manage overwhelming, conflicting or ambiguous demands, which they may feel ill-equipped to handle. Simultaneously, they must manage the emotions they display towards customers, suppressing some, and expressing others, be they genuine or contrived. If the in-role effort required of employees exceeds their inherent capacity to cope, burnout may result. Burnout, in turn, can have serious detrimental consequences for the psychological well being of employees. We find that both emotional management and role stressors impact burnout. We also confirm that burnout predicts psychological strain. In line with the Job Demands and Resources Model, we examine the mitigating impact of perceived support on these relationships but do not find a significant mitigating impact.

Aligning employee service recovery performance with brand values:the role of brand-specific leadership

This study investigates the effects of brand-specific leadership on employees' brand-aligned service recovery performance (SRP). In order to do so, we empirically test a conceptual model of relationships between brand-specific transformational leadership (TFL) and transactional leadership (TRL), trust in leader and in corporate brand, brand identification, and SRP from employees' perspectives. It is the first study to incorporate trust in corporate brand into the framework. Results from a study of 246 customer-contact employees show that brand-specific TFL has a positive impact on all variables studied, while brand-specific TRL is ineffective in fostering brand-building behaviours. More specifically, brand-specific TFL's effects on employee SRP are mediated by trust in the leader, trust in the corporate brand, and brand identification. Implications and future research directions are discussed. © 2013 Copyright Taylor & Francis.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.