Review of progress in implementing the recommendations of Sir Gareth Roberts regarding employability and career development of PhD students and research staff:A report for Research Councils UK by an independent review panel October 2010

The need for improvement in the development of research careers and researchers’ training in transferable skills was highlighted in two particular recommendations (numbers 4.2 and 5.3) in the 2002 report ‘SET for success: the report of Sir Gareth Roberts’ Review - the supply of people with science, technology, engineering and mathematics skills’ (Roberts, 2002). As a consequence of that review, Research Councils UK (RCUK)1 have invested about £120 million, usually referred to as ’Roberts’ Money’, in research organisations to address this concern in all research disciplines. The last ‘Roberts’ Money’ payment will be for the period up to March 2011; it was therefore proposed to assess the progress made with taking forward these specific recommendations. An independent panel was formed by RCUK to undertake this review in 2010. The terms of reference for the panel are in Annex A. In summary, the panel was asked to review progress made and to advise RCUK and the higher education (HE) sector about future requirements for the development and training of researchers. In the course of their review, the panel considered a wide range of existing reports, interviewed key stakeholders in the HE sector and elsewhere, as well as drawing on their own knowledge and expertise. This report presents the findings of the panel’s review.

Identifying capacity building cluster impact in the West Midlands

specific themes in Energy, Health Technologies and Finance via KTP (6), CASE (18), Placement (6) and Voucher (3) projects across the themes. Through the analysis of responses to an assessment questionnaire, reports from and interviews with a number of researchers, academics and industry sponsors engaged in KTP, CASE, and Placement projects we attempt to identify, analyse and assess the impact of these research projects. We adopt the Research Councils UK (RCUK) definition of research impact as 'the demonstrable contribution that excellent research makes to society and the economy'. In addition to identifying academic impact, we identify evidence of social and economic impact, for example, that it has been taken up and used by policy makers, and practitioners and has led to improvements in services or business. Helpful and un-helpful factors, identified during the execution of the research projects, are also considered.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

French linguistics research and teaching in UK and Irish HE institutions

Introduction: The research and teaching of French linguistics in UK higher education (HE) institutions have a venerable history; a number of universities have traditionally offered philology or history of the language courses, which complement literary study. A deeper understanding of the way that the phonology, syntax and semantics of the French language have evolved gives students linguistic insights that dovetail with their study of the Roman de Renart, Rabelais, Racine or the nouveau roman. There was, in the past, some coverage of contemporary French phonetics but little on sociolinguistic issues. More recently, new areas of research and teaching have been developed, with a particular focus on contemporary spoken French and on sociolinguistics. Well supported by funding councils, UK researchers are also making an important contribution in other areas: phonetics and phonology, syntax, pragmatics and second-language acquisition. A fair proportion of French linguistics research occurs outside French sections in psychology or applied linguistics departments. In addition, the UK plays a particular role in bringing together European and North American intellectual traditions and methodologies and in promoting the internationalisation of French linguistics research through the strength of its subject associations, and that of the Journal of French Language Studies. The following sections treat each of these areas in turn. History of the French Language There is a long and distinguished tradition in Britain of teaching and research on the history of the French language, particularly, but by no means exclusively, at the universities of Cambridge, Manchester and Oxford.

The food superstore revolution:changing times, changing research agendas in the UK

This article considers the changing scope of research into UK food superstores over some three decades. Rather than catalogue changing market shares by format, we seek instead to show how such change links to national policy agendas. Academic research has evolved to address the growing complexities of the social, technological, economic and political impacts of the superstore format. We exemplify this by tracing the progression of retail change in Portsmouth, Hampshire, over 30 years. We discover that academic research can conflict with the preconceptions of some public policy makers. The position is exacerbated by a progressive decline in public information – and a commensurate rise in factual data held by commercial data companies – that leaves policy makers with a choice of which data to believe. This problem casts a shadow over the objectivity of macro-policy as currently formulated. Concerns currently arise because the UK Competition Commission (2006–2009 but ongoing) starts each inquiry afresh with a search for recent data. Furthermore, it has recently called for changes to retail planning – the very arena in which UK superstore research commenced.

Promoting scholarship - The way forward: Learning & teaching research in a complex environment – A typology

This paper provides a critical overview into a distinctive typology of Learning and Teaching Research developed at a relatively small, research-led UK University. Based upon research into staff perceptions of the relationship between learning and teaching research and practice, the model represents an holistic approach to evidence-based learning and teaching practice in Contemporary Higher Education.

The integration of knowledge within science, technology and industry : enzymes a case study

Enzyme technology is widely regarded as an exciting new technology possessing great opportunities for commercial interests and is one of a small group of key technologies singled out by the Science Research Councils during the 1960's as worthy of special support. In this thesis I outline the basic characteristics of this technology analysing the nature of the Government's policy towards it. The approach I have chosen requires an in depth analysis of the innovation process for enzymes which forms the basis for a model. This model is then used to focus on aspects of the UK science policy towards innovation in enzyme technology, assessing its impacts, and appraising the usefulness of this approach for future policy initiatives.

Master and apprentice or difference and complementarity? Local government practioners, doctoral studies and co-produced research

In their search for innovative policy solutions to complex social problematics, local governance practitioners will look to synergising specific policy guidance from government departments with conceptual scientific research outputs. UK academics are also now expected to emphasise the relevance of their research and to increase its utilisation by practitioners. Away from utilitarian pressures, academics from applied discipline, such as Public Administration and Local Government Studies are increasingly drawn to the benefits of co-produced research. Despite the pressure for more co-research there are few opportunities for practitioners and academics to nurture relationships that would support close collaboration. This paper looks at the opportunity for closer collaboration when practitioners undertake research degrees, in order to enhance their cognitive skills and develop greater scientific knowledge of particular policy domains. If this route to closer collaboration is to succeed, it will require academics to think differently about their relationship with practitioner-students.

The impact of university research on corporate patenting

This paper analyses the association between the number of patenting manufacturing firms and the quantity and quality of relevant university research across UK postcode areas. We show that different measures of research `power' and `excellence' positively affect the patenting of small firms within the same postcode area. Patenting by large firms, in contrast, is unaffected by research undertaken in nearby universities. This confirms the commonly held view that location matters more for small firms than large firms. We also investigate specific channels of technology transfer, finding that university-industry knowledge transfer occurs through both formal and informal channels. From a methodological point of view, we contribute to the existing literature by accounting for potential simultaneity between university research and patenting of local firms by adopting an instrumental variable approach. Moreover, we also allow for the effects of the presence of universities in neighbouring postcode areas to influence firms' patenting activity by incorporating spatial neighborhood effects.

Computationsl modelling of dimethyl ether separation and steam reforming in fluidized bed reactors

This study presents a computational fluid dynamic (CFD) study of Dimethyl Ether (DME) gas adsorptive separation and steam reforming (DME-SR) in a large scale Circulating Fluidized Bed (CFB) reactor. The CFD model is based on Eulerian-Eulerian dispersed flow and solved using commercial software (ANSYS FLUENT). Hydrogen is currently receiving increasing interest as an alternative source of clean energy and has high potential applications, including the transportation sector and power generation. Computational fluid dynamic (CFD) modelling has attracted considerable recognition in the engineering sector consequently leading to using it as a tool for process design and optimisation in many industrial processes. In most cases, these processes are difficult or expensive to conduct in lab scale experiments. The CFD provides a cost effective methodology to gain detailed information up to the microscopic level. The main objectives in this project are to: (i) develop a predictive model using ANSYS FLUENT (CFD) commercial code to simulate the flow hydrodynamics, mass transfer, reactions and heat transfer in a large scale dual fluidized bed system for combined gas separation and steam reforming processes (ii) implement a suitable adsorption models in the CFD code, through a user defined function, to predict selective separation of a gas from a mixture (iii) develop a model for dimethyl ether steam reforming (DME-SR) to predict hydrogen production (iv) carry out detailed parametric analysis in order to establish ideal operating conditions for future industrial application. The project has originated from a real industrial case problem in collaboration with the industrial partner Dow Corning (UK) and jointly funded by the Engineering and Physical Research Council (UK) and Dow Corning. The research examined gas separation by adsorption in a bubbling bed, as part of a dual fluidized bed system. The adsorption process was simulated based on the kinetics derived from the experimental data produced as part of a separate PhD project completed under the same fund. The kinetic model was incorporated in FLUENT CFD tool as a pseudo-first order rate equation; some of the parameters for the pseudo-first order kinetics were obtained using MATLAB. The modelling of the DME adsorption in the designed bubbling bed was performed for the first time in this project and highlights the novelty in the investigations. The simulation results were analysed to provide understanding of the flow hydrodynamic, reactor design and optimum operating condition for efficient separation. Bubbling bed validation by estimation of bed expansion and the solid and gas distribution from simulation agreed well with trends seen in the literatures. Parametric analysis on the adsorption process demonstrated that increasing fluidizing velocity reduced adsorption of DME. This is as a result of reduction in the gas residence time which appears to have much effect compared to the solid residence time. The removal efficiency of DME from the bed was found to be more than 88%. Simulation of the DME-SR in FLUENT CFD was conducted using selected kinetics from literature and implemented in the model using an in-house developed user defined function. The validation of the kinetics was achieved by simulating a case to replicate an experimental study of a laboratory scale bubbling bed by Vicente et al [1]. Good agreement was achieved for the validation of the models, which was then applied in the DME-SR in the large scale riser section of the dual fluidized bed system. This is the first study to use the selected DME-SR kinetics in a circulating fluidized bed (CFB) system and for the geometry size proposed for the project. As a result, the simulation produced the first detailed data on the spatial variation and final gas product in such an industrial scale fluidized bed system. The simulation results provided insight in the flow hydrodynamic, reactor design and optimum operating condition. The solid and gas distribution in the CFB was observed to show good agreement with literatures. The parametric analysis showed that the increase in temperature and steam to DME molar ratio increased the production of hydrogen due to the increased DME conversions, whereas the increase in the space velocity has been found to have an adverse effect. Increasing temperature between 200 oC to 350 oC increased DME conversion from 47% to 99% while hydrogen yield increased substantially from 11% to 100%. The CO2 selectivity decreased from 100% to 91% due to the water gas shift reaction favouring CO at higher temperatures. The higher conversions observed as the temperature increased was reflected on the quantity of unreacted DME and methanol concentrations in the product gas, where both decreased to very low values of 0.27 mol% and 0.46 mol% respectively at 350 °C. Increasing the steam to DME molar ratio from 4 to 7.68 increased the DME conversion from 69% to 87%, while the hydrogen yield increased from 40% to 59%. The CO2 selectivity decreased from 100% to 97%. The decrease in the space velocity from 37104 ml/g/h to 15394 ml/g/h increased the DME conversion from 87% to 100% while increasing the hydrogen yield from 59% to 87%. The parametric analysis suggests an operating condition for maximum hydrogen yield is in the region of 300 oC temperatures and Steam/DME molar ratio of 5. The analysis of the industrial sponsor’s case for the given flow and composition of the gas to be treated suggests that 88% of DME can be adsorbed from the bubbling and consequently producing 224.4t/y of hydrogen in the riser section of the dual fluidized bed system. The process also produces 1458.4t/y of CO2 and 127.9t/y of CO as part of the product gas. The developed models and parametric analysis carried out in this study provided essential guideline for future design of DME-SR at industrial level and in particular this work has been of tremendous importance for the industrial collaborator in order to draw conclusions and plan for future potential implementation of the process at an industrial scale.

Pain management programmes for non-English-speaking black and minority ethnic groups with long-term or chronic pain

Increasing ethnic diversity in the UK means that there is a growing need for National Health Service care to be delivered to non-English-speaking patients. The aims of the present systematic review were to: (1) better understand the outcomes of chronic pain management programmes (PMPs) for ethnic minority and non-English-speaking patients and (2) explore the perspectives on and experiences of chronic pain for these groups. A systematic review identified 26 papers meeting the inclusion criteria; no papers reported on the outcomes of PMPs delivered in the UK. Of the papers obtained, four reported on PMPs conducted outside the UK; eight reported on ethnic differences in patients seeking support from pain management services in America; and the remaining papers included literature reviews, an experimental pain study, a collaborative enquiry, and a survey of patient and clinician ratings of pain. The findings indicate a lack of research into UK-based pain management for ethnic minorities and non-English-speaking patients. The literature suggests that effective PMPs must be tailored to meet cultural experiences of pain and beliefs about pain management. There is a need for further research to explore these cultural beliefs in non-English-speaking groups in the UK. Culturally sensitive evaluations of interpreted PMPs with long-term follow-up are needed to assess the effectiveness of current provision. Copyright © 2015 John Wiley & Sons, Ltd.

The state of the field in UK management research: reflections of the Research Assessment Exercise (RAE) panel

This paper reviews the state of the field of the sub-disciplines within UK management research, based upon the submissions of 94 UK higher education institutions to the Business and Management Studies Panel in the UK's 2001 Research Assessment Exercise (RAE). It offers observations on the UK model of the assessment of quality in, and funding of, research conducted in publicly funded higher education institutions.

The new UK research governance: its impact on pharmacy undergraduate research projects

Implementation of the Department of Health Research Governance Framework (RGF) in the United Kingdom has major implications for the conduct of pharmacy practice undergraduate research projects. This paper draws upon a survey of local ethics research committees (LRECs) in the greater Birmingham area to identify the issues that arise from the RGF in relation to non-clinical practice research in community pharmacy. Although there is some evidence of minor differences between LRECs, the overwhelming finding is that projects will be subject to the full force of the RGF. The implications are discussed in relation to specific issues relating to non-clinical research, the professional aspirations for a research capable workforce, and the expertise within pharmacy to meet the current accreditation requirements for undergraduate projects.

Evaluating cost efficiency in central administrative services in UK universities

This paper describes an attempt to evaluate cost efficiency in UK university central administration. The funding councils of higher education institutions have progressively evolved elaborate systems for measuring university performance in teaching quality and research. Indeed, funding of universities is linked to their performance in research. The allocation of resources between academic and administrative activities, on the other hand, has so far not been subject to scrutiny. Yet, expenditure on administration is typically some 30% of that allocated to academic activities. This paper sets up a data envelopment analysis (DEA) framework to identify practices leading to cost-efficient central administrative services in UK universities. The problems in defining the unit of assessment and the relationship between the inputs and the outputs are clearly demonstrated. © 2005 Elsevier Ltd. All rights reserved.