Reinforcing the security of corporate information resources:a critical review of the role of the acceptable use policy

Increasingly users are seen as the weak link in the chain, when it comes to the security of corporate information. Should the users of computer systems act in any inappropriate or insecure manner, then they may put their employers in danger of financial losses, information degradation or litigation, and themselves in danger of dismissal or prosecution. This is a particularly important concern for knowledge-intensive organisations, such as universities, as the effective conduct of their core teaching and research activities is becoming ever more reliant on the availability, integrity and accuracy of computer-based information resources. One increasingly important mechanism for reducing the occurrence of inappropriate behaviours, and in so doing, protecting corporate information, is through the formulation and application of a formal ‘acceptable use policy (AUP). Whilst the AUP has attracted some academic interest, it has tended to be prescriptive and overly focussed on the role of the Internet, and there is relatively little empirical material that explicitly addresses the purpose, positioning or content of real acceptable use policies. The broad aim of the study, reported in this paper, is to fill this gap in the literature by critically examining the structure and composition of a sample of authentic policies – taken from the higher education sector – rather than simply making general prescriptions about what they ought to contain. There are two important conclusions to be drawn from this study: (1) the primary role of the AUP appears to be as a mechanism for dealing with unacceptable behaviour, rather than proactively promoting desirable and effective security behaviours, and (2) the wide variation found in the coverage and positioning of the reviewed policies is unlikely to be fostering a coherent approach to security management, across the higher education sector.

The social and entrepreneurial orientation of small businesses:mutually exclusive or reinforcing? (INTERACTIVE PAPER)

Principal Topic - As argued by Acs and Phillips (2002) it is not only “the creation of wealth (entrepreneurship)” but also “the reconstitution of wealth (philanthropy)”, which has been essential for the inherent dynamism of the market economy (Ibid., p.201). However, we understand little about the entrepreneurship – philanthropy link in institutional contexts that differ from that of leading developed market economies. Accordingly our research agenda is to investigate the entrepreneurship-philanthropy nexus in a very different context of Lithuania, a country which shed a command economy system twenty years ago. In particular, we are interested to see if the cluster of attitudes and strategies of firms conducive to entrepreneurship, i.e. their entrepreneurial orientation (Covin & Slevin, 1989), is consistent or contradictory with philanthropy? In other words, is philanthropy strongly associated with some core components of entrepreneurship, or is it an entrepreneurial anomaly, relying on a minority of economic actors that provide important links with wider, non-economic communities. Method - The study draws on 270 randomly sampled, phone interviews with owners and ownermanagers of small and medium-sized enterprises (SMEs), i.e. firms with less than 250 employees. Interviews were conducted in Lithuania during January- March, 2008. Our results are based on confirmatory factor analysis combined with regression analysis. Results and Implications - Despite the legacy of informal institutions that is conducive neither to entrepreneurship nor to civic society, we found that by now, (i) the companies that score highest on entrepreneurial orientation construct, (ii) that perform best and those (iii) that have foreign owners are also most likely to declare their commitment to philanthropy. Our findings that most entrepreneurial firms are also involved in philanthropy are consistent with the perspective on the pattern of development in an entrepreneurial economy as outlined by Acs and Phillips (2002).

A study of fatigue failure in vulcanized rubber

Some aspects of fatigue failure in rubbers have been examined. Scanning electron micrographs of the surface exposed by the failure confirm the incremental, crack-propagation nature, of the fatigue process. Many other features of the failure surface have been identified and related to this process. The complicating effect of a reinforcing filler has also been investigated. The fatigue resistance of rubber test-pieces deformed in simple tension was measured as a function of frequency and temperature. This showed that an increase in frequency was equivalent to a decrease in temperature; for an amorphous unfilled rubber the time and temperature effects of crystallisation and fillers on the validity of this transformation is considered. This transformation indicates that hysteresis plays an important part in the fatigue process. Torsional pendulum measurements were used to demonstrate the dependence of the fatigue life on the mechanical damping. An apparatus was developed to measure the hysteresial energy loss directly at deformations, rates of deformation and temperatures consistent with a typical fatigue test. Measurements made with this apparatus are compared with fatigue values and a quantitative relationship is suggested describing fatigue, in terms of the energy lost per unit energy input in a cycle of a fatigue test.

The other on display: translation in the Ethnographic Museum

The ethnographic museum in the West has a long and troubling history. The display of 'exotic peoples' in travelling exhibitions began as early as the sixteenth century, but it was the mid and late nineteenth century that saw the great expansion of museums as sites to show artefacts collected - under anything but reputable circumstances - from what were considered the 'primitive', 'natural', or 'tribal' peoples of the world. Today the ethnographic museum is still a feature of large European cities, though faced with newly formulated dilemmas in the postcolonial world. For how can the material culture of a non-western people be collected and displayed in the West without its makers being translated into wordless and powerless objects of visual consumption? In national museums the processes of choosing, contextualizing and commentating exhibits help form national identity; in the ethnographic museum, similarly, they shape perceptions of the apparently distant Other. Like written ethnography, the museum is a 'translation of culture', with many of the associated problems traced by Talal Asad (1986). Like the written form, it has to represent the dialogic realities of cultural encounters in a fixed and intelligible form, to propose categories that define and order the material it has gathered. As the public face of academic ethnography, the museum interprets other cultures for the benefit of the general reader, and in that task museum practice, like all ethnography, operates within very specific historical and political parameters. How are museums in western Europe responding to the issues raised by critical ethnographers like James Clifford (1988), with their focus on the politics of representation? Is globalisation increasing the degree of accountability imposed on the ethnographic museum, or merely reinforcing older patterns? What opportunities and problems are raised by the use of more words - more 'translation' in the narrower sense - in ethnographic museums, and how do museums gain from introducing a reflexive and contextualizing concept of "thick translation" (Appiah 1993) into their work of interpretation?

Why are health care interventions delivered over the internet? A systematic review of the published literature

Background: As Internet use grows, health interventions are increasingly being delivered online. Pioneering researchers are using the networking potential of the Internet, and several of them have evaluated these interventions. Objective: The objective was to review the reasons why health interventions have been delivered on the Internet and to reflect on the work of the pioneers in this field in order to inform future research. Methods: We conducted a qualitative systematic review of peer-reviewed evaluations of health interventions delivered to a known client/patient group using networked features of the Internet. Papers were reviewed for the reasons given for using the Internet, and these reasons were categorized. Results: We included studies evaluating 28 interventions plus 9 interventions that were evaluated in pilot studies. The interventions were aimed at a range of health conditions. Reasons for Internet delivery included low cost and resource implications due to the nature of the technology; reducing cost and increasing convenience for users; reduction of health service costs; overcoming isolation of users; the need for timely information; stigma reduction; and increased user and supplier control of the intervention. A small number of studies gave the existence of Internet interventions as the only reason for undertaking an evaluation of this mode of delivery. Conclusions: One must remain alert for the unintended effects of Internet delivery of health interventions due to the potential for reinforcing the problems that the intervention was designed to help. Internet delivery overcomes isolation of time, mobility, and geography, but it may not be a substitute for face-to-face contact. Future evaluations need to incorporate the evaluation of cost, not only to the health service but also to users and their social networks. When researchers report the outcomes of Internet-delivered health care interventions, it is important that they clearly state why they chose to use the Internet, preferably backing up their decision with theoretical models and exploratory work. Evaluation of the effectiveness of a health care intervention delivered by the Internet needs to include comparison with more traditional modes of delivery to answer the following question: What are the added benefits or disadvantages of Internet use that are particular to this mode of delivery? © Griffiths, Frances, Lindenmeyer, Antje, Powell, John, Thorogood, Margaret.

Crisis and institutional change in urban governance

Recent studies of new institutional spaces typically underplay the uneven and contested process of institutional change by undervaluing the role of inherited institutions and discourses. This is a critical issue as neoliberal networked forms of governance interact with inherited institutional arrangements, characterised by important path dependencies that guide actors. Contradiction and tensions can emerge, culminating in crisis tendencies, and producing both discursive and material contestation between actors. It is with an understanding of path dependencies, ideas (structured into discourses), and (perceived and actual) crisis tendencies that this paper examines contested institutional change through a case-study analysis of one city, and a critical engagement with neoinstitutionalism. The purpose is to examine, firstly, the significance of inherited path-dependent arrangements in fostering conflict and crisis tendencies during interaction with emergent state action; secondly, the extent to which crisis is evident in processes of institutional change and the form that this takes; and, thirdly, the importance of ideas in producing institutional transformation. It is found that institutional conflict is evident between inherited institutions and emergent state action, and stems both from the way agents are organised by the state and from certain path dependencies, but that this does not lead to an actual material crisis. Rather, the nation-state, in partnership with senior city government actors, use ideational/discursive ‘crisis talk’ as a means by which to induce institutional change. The role of ideas has been in critical in this process as the nation-state frames problems and solutions in line with its existing policy paradigm and institutional arrangements, and with discourses further reinforcing existing material power relations.

Fatigue in rubber vulcanisates

A study has been made of the effect of single extensions and continuous fatigue on the structures of various natural rubber networks. The change in network structure of a conventional vulcanisate on a single extension manifests itself as permanent set. The change in network structure has been assessed by the use of the chemical probes, propan-2-thiol/piperidine, hexane-thiol/piperidine and triphenyl phosphine, which determine the polysulphide and disulphide crosslink densities and main chain modification respectively. The permanent set induced on a single extension of a conventional sulphur vulcanisate has been shown to result from the destruction and reformation of polysulphide crosslinks. The magnitude of the effect was dependent upon the degree of extension and showed a maximum at extensions corresponding to the onset of stress-induced crystallisation. The incorporation of a reinforcing filler, HAF-carbon black, magnified the effect. Vulcanisates that possessed only mono and disulphide crosslinks did not show any significant permanent set. The continuous changes in network structure during fatigue have also been determined, and the effects of carbon black and antioxidants on these changes and the fatigue life have been assessed. During fatigue the overall crosslink density increased slightly, which resulted from the destruction of polysulphide crosslinks. and their replacement by principally disulphide crosslinks. Antioxidants reduced the rate of destruction of polysulphide crosslinks and increased the fatigue life of the rubber network. The fatigue life of the network also depended upon the concentration of free chain ends. These chain ends were incorporated into the network by masticating rubber under nitrogen in the presence of bis (diisopropyl)thiophosphoryl disulphide, which improved the fatigue resistance by up to 9%.

The strength of column-to-foundation joints in reinforced concrete

This thesis is concerned with the experimental and theoretical investigation into the compression bond of column longitudinal reinforcement in the transference of axial load from a reinforced concrete column to a base. Experimental work includes twelve tests with square twisted bars and twenty four tests with ribbed bars. The effects of bar size, anchorage length in the base, plan area of the base, provision of bae tensile reinforcement, links around the column bars in the base, plan area of column and concrete compressive strength were investigated in the tests. The tests indicated that the strength of the compression anchorage of deformed reinforcing steel in the concrete was primarily dependent on the concrete strength and the resistance to bursting, which may be available within the anchorage . It was shown in the tests without concreted columns that due to a large containment over the bars in the foundation, failure occurred due to the breakdown of bond followed by the slip of the column bars along the anchorage length. The experimental work showed that the bar size , the stress in the bar, the anchorage length, provision of the transverse steel and the concrete compressive strength significantly affect the bond stress at failure. The ultimate bond stress decreases as the anchorage length is increased, while the ultimate bond stress increases with increasing each of the remainder parameters. Tests with concreted columns also indicated that a section of the column contributed to the bond length in the foundation by acting as an extra anchorage length. The theoretical work is based on the Mindlin equation( 3), an analytical method used in conjunction with finite difference calculus. The theory is used to plot the distribution of bond stress in the elastic and the elastic-plastic stage of behaviour. The theory is also used to plot the load-vertical displacement relationship of the column bars in the anchorage length, and also to determine the theoretical failure load of foundation. The theoretical solutions are in good agreement with the experimental results and the distribution of bond stress is shown to be significantly influenced by the bar stiffness factor K. A comparison of the experimental results with the current codes shows that the bond stresses currently used are low and in particular, CPIlO(56) specifies very conservative design bond stresses .

Strategic planning as communicative process

This thesis looks at the construction of a strategic plan within a British university (Unico). After a change in leadership, the well-known strategic planning sequence was adopted to set directions according to Unico’s three Missions, followed by the development of respective goals and measures. The evolving strategic content coincided with the development of Unico’s strategic plan. I was able to follow Unico’s planning efforts over 10 months, from first planning meeting to completion of its strategic plan. The main data source provided non-participant observation (n = 25) and ten versions of Unico’s strategic plan. Additionally, seventy-six interviews were held with participants at various points. In order to examine the strategic plan’s construction, I reconceptualised strategic planning as a communicative process consisting of oral talk and written text. Through this interplay strategic planning activities come in to being. Such reconceptualisation provided a conceptual framework to study the in situ interactions without neglecting contextual characteristics embedding the communicative process. Strategic plans are currently seen as promoting inflexibility and reinforcing the institutional nature of formal strategic planning. Adopting dialogism, as advocated by Bakhtin and Ricoeur, this research provides novel insights into the dialogic of strategy talk and strategy text, such as a strategic plan. Findings illustrated that a strategic plan production cycle provided a meaning making platform for its participants. Through recurrently amending the plan, its content became increasingly specific while at the same time reflecting agreed terminology. This thesis offers an alternative view on strategic planning, elaborates on the strategy-as-practice perspective, focusing on the under-explored area of individuals’ interactions at the micro level, and elaborates on the dialogic of text and agency/conversation, distinguishing between talk and text.

Using organoclay to promote morphology refinement and co-continuity in high-density polyethylene/polyamide 6 blends - Effect of filler content and polymer matrix composition

We investigate the gradual changes of the microstructure of two blends of high-density polyethylene (HDPE) and polyamide 6 (PA6) at opposite composition filled with increasing amounts of an organomodified clay. The filler locates preferentially inside the polyamide phase, bringing about radical alterations in the micron-scale arrangement of the polymer phases. When the host polyamide represents the major constituent, a sudden reduction of the average sizes of the polyethylene droplets was observed upon addition of even low amounts of organoclay. A morphology refinement was also noticed at low filler contents when the particles distributes inside the minor phase. In this case, however, keep increasing the organoclay content eventually results in a high degree of PA6 phase continuity. Rheological analyses reveal that the filler loading at which the polyamide assembles in a continuous network corresponds to the critical threshold for its rheological transition from a liquid- to a gel-like behaviour, which is indicative of the structuring of the filler inside the host PA6. On the basis of this finding, a schematic mechanism is proposed in which the role of the filler in driving the space arrangement of the polymer phases is discussed. Finally, we show that the synergism between the reinforcing action of the filler and its ability to affect the blend microstructure can be exploited in order to enhance relevant technological properties of the materials, such as their high temperature structural integrity.

Selective localization of organoclay and effects on the morphology and mechanical properties of LDPE/PA11 blends with distributed and co-continuous morphology

A study was made on the effect of small amounts of organically modified clay on the morphology and mechanical properties of blends of low-density polyethylene and polyamide 11 at different compositions. The influence of the filler on the blend morphology was investigated using wide angle X-ray diffractometry, scanning and transmission electron microscopy and selective extraction experiments. The filler was found to locate predominantly in the more hydrophilic polyamide phase. Although such uneven distribution does not have a significant effect on the onset of phase co-continuity of the polymer components, it brings about a drastic refinement of the microstructure for the blends both with droplets/matrix and co-continuous morphologies. In addition to the expected reinforcing action of the filler, the resulting fine microstructure plays an important role in enhancing the mechanical properties of the blends. This is essentially because of a good quality of stress transfer across the interface between the constituents, which also seems to benefit for a good interfacial adhesion promoted by the filler. Our results provide the experimental evidence for the capabilities of nanoparticles added to multiphase polymer systems to act selectively as a reinforcing agent for specific domains of the material and as a medium able to assist the refinement of the polymer phases during mixing.

Effects of fibre reinforcement on the mechanical properties of brushite cement

In this study the effect of structure and amount of polyglactin fibre incorporation into a brushite forming calcium phosphate cement system and the effect of mechanical compaction on the fibre modified system were investigated. In comparison the effect of resorbable polycaprolactone surface coating of cement specimens was investigated. The results showed that, apart from the mechanical properties of the reinforcing material, the structure of the incorporated fibres, regular or random, is crucial for the resulting flexural strength and modulus of elasticity. Fibre reinforcement could also be combined with mechanical compaction of the cement/fibre composite paste leading to a possible 7-fold increase in flexural strength or an almost 5-fold increase in modulus of elasticity. Reinforcement of the tensile surface of cement grafts may ultimately improve strength where required, especially in conjunction with bone fixation devices. © 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Compressed orally disintegrating tablets:excipients evolution and formulation strategies

Introduction: Orally disintegrating tablets (ODTs) have emerged as one of the novel solid oral dosage forms with a potential to deliver a wide range of drug candidates to both paediatric and geriatric patient populations. Of the plethora of available technologies, compression of excipients offers a cost-effective and translatable methodology for the manufacture of ODTs. Areas covered: The review is a modest endeavour from the authors to assemble literature published over the last couple of decades on formulation development of compressed ODT. It describes the main ODT excipients used since the introduction of this dosage form in the 1990s and explores the switch from cellulose-based excipients towards sugar/polyols. Furthermore, it unfolds the key properties of ODT fillers, binders and disintegrants with an emphasis on their advantages and drawbacks. The review also provides a critical assessment of the various strategies employed for performance enhancement of compressed ODT with a focus on the underlying mechanisms for fast disintegration and acceptable mechanical strength. Expert opinion: Recent increase in the total number of compression-based technologies for ODT development promises to reduce the manufacturing cost of this dosage form in the future. However, some of the developed methods may affect the stability of tablets due to susceptibility to moisture, collapse of pores or the generation of less stable polymorphs which require rigorous testing prior to commercialization. © 2013 Informa UK, Ltd.

Export propensity, export intensity and firm performance:the role of the entrepreneurial founding team

We investigate how the characteristics and experience of the entrepreneurial founding team (EFT) affect the export orientation and subsequent performance of the businesses they establish, while allowing for the mutually reinforcing relationship between exporting and productivity. Using a sample of UK technology-based firms, we hypothesise and confirm that the set of EFT human capital needed for entering export markets is different from that required for succeeding in export markets. Commercial and managerial experience helps firms become exporters, but once over the exporting hurdle it is education, both general and specific, that has a substantially positive effect. The overall pattern of human capital effects on productivity is similar to those for export propensity. We also find evidence that productive firms are more likely both to enter export markets and to be export intensive, and that exporting boosts subsequent firm productivity.

Astrocyte plasticity:implications for synaptic and neuronal activity

Astrocytes are increasingly implicated in a range of functions in the brain, many of which were previously ascribed to neurons. Much of the prevailing interest centers on the role of astrocytes in the modulation of synaptic transmission and their involvement in the induction of forms of plasticity such as long-term potentiation and long-term depression. However, there is also an increasing realization that astrocytes themselves can undergo plasticity. This plasticity may be manifest as changes in protein expression which may modify calcium activity within the cells, changes in morphology that affect the environment of the synapse and the extracellular space, or changes in gap junction astrocyte coupling that modify the transfer of ions and metabolites through astrocyte networks. Plasticity in the way that astrocytes release gliotransmitters can also have direct effects on synaptic activity and neuronal excitability. Astrocyte plasticity can potentially have profound effects on neuronal network activity and be recruited in pathological conditions. An emerging principle of astrocyte plasticity is that it is often induced by neuronal activity, reinforcing our emerging understanding of the working brain as a constant interaction between neurons and glial cells. © The Author(s) 2013.