Rapid heuristic projection on simplicial cones

A very fast heuristic iterative method of projection on simplicial cones is presented. It consists in solving two linear systems at each step of the iteration. The extensive experiments indicate that the method furnishes the exact solution in more then 99.7 percent of the cases. The average number of steps is 5.67 (we have not found any examples which required more than 13 steps) and the relative number of steps with respect to the dimension decreases dramatically. Roughly speaking, for high enough dimensions the absolute number of steps is independent of the dimension.

Pole tip recession in linear tape systems

The tribology of linear tape storage system including Linear Tape Open (LTO) and Travan5 was investigated by combining X-ray Photoelectron Spectroscopy (XPS), Auger Electron Spectroscopy (AES), Optical Microscopy and Atomic Force Microscopy (AFM) technologies. The purpose of this study was to understand the tribology mechanism of linear tape systems then projected recording densities may be achieved in future systems. Water vapour pressure or Normalized Water Content (NWC) rather than the Relative Humidity (RH) values (as are used almost universally in this field) determined the extent of PTR and stain (if produced) in linear heads. Approximately linear dependencies were found for saturated PTR increasing with normalized water content increasing over the range studied using the same tape. Fe Stain (if produced) preferentially formed on the head surfaces at the lower water contents. The stain formation mechanism had been identified. Adhesive bond formation is a chemical process that is governed by temperature. Thus the higher the contact pressure, the higher the contact temperature in the interface of head and tape, was produced higher the probability of adhesive bond formation and the greater the amount of transferred material (stain). Water molecules at the interface saturate the surface bonds and makes adhesive junctions less likely. Tape polymeric binder formulation also has a significant role in stain formation, with the latest generation binders producing less transfer of material. This is almost certainly due to higher cohesive bonds within the body of the magnetic layer. TiC in the two-phase ceramic tape-bearing surface (AlTiC) was found to oxidise to form TiO2.The oxidation rate of TiC increased with water content increasing. The oxide was less dense than the underlying carbide; hence the interface between TiO2 oxide and TiC was stressed. Removals of the oxide phase results in the formation of three-body abrasive particles that were swept across the tape head, and gave rise to three-body abrasive wear, particularly in the pole regions. Hence, PTR and subsequent which signal loss and error growth. The lower contact pressure of the LTO system comparing with the Travan5 system ensures that fewer and smaller three-body abrasive particles were swept across the poles and insulator regions. Hence, lower contact pressure, as well as reducing stain in the same time significantly reduces PTR in the LTO system.

From recession to renewal:the impact of the financial crisis on public services and local government

Book review of From Recession to Renewal: The Impact of the Financial Crisis on Public Services and Local Government, Joanna Richardson (Ed). Bristol, Policy Press, 2010, ISBN 9781847426994

Regional responses to recession:the role of the West Midlands regional taskforce

Bailey D. and Berkeley N. Regional responses to recession: the role of the West Midlands Regional Taskforce, Regional Studies. Regional taskforces were set up across the English regions in late 2008 in response to the most severe recession since the Second World War. This paper examines the role of one such body, the West Midlands Regional Taskforce, as an example of regional response to recession, and offers potential lessons for the future in dealing with such situations. In so doing it reflects on the contested concept of regional 'resilience' and its relevance for policy actions at the regional level. Understanding how the region responded in this way could help in maintaining a 'permanent capacity' to deal with shocks, especially in the context of the abolition of regional development agencies (RDAs) in England from 2012 and their replacement with local enterprise partnerships (LEPs). © 2014 © 2014 The Author(s). Published by Taylor & Francis.

Indentation of elastically anisotropic half-spaces by cones and parabolae of revolution

Indentation of ceramic materials with smooth indenters such as parabolae of revolution and spheres can be conducted in the elastic regime to relatively high loads. Ceramic single crystals thus provide excellent calibration media for load-and depth-sensing indentation testing; however, they are generally anisotropic and a complete elastic analysis is cumbersome. This study presents a simplified procedure for the determination of the stiffness of contact for the indentation of an anisotropic half-space by a rigid frictionless parabola of revolution which, to first order, approximates spherical indentation. Using a similar approach, a new procedure is developed for analysing conical indentation of anisotropic elastic media. For both indenter shapes, the contact is found to be elliptical, and equations are determined for the size, shape and orientation of the ellipse and the indentation modulus.

Inward investment and the drivers of post recession recovery in Germany

This paper examines changes in the drivers of productivity in Germany over the period 1997-2012. We start by comparing the performance of German firms and inward investors before and during the recovery from the recent global financial crisis of 2008 across a range of sectors, and subsequently examine the channels through which different firms are able to generate productivity. Our results show that foreign investors are more productive than German MNEs and purely domestic firms, with the gap narrowing in the manufacturing sector, but growing in the service sector during the recovery period. We also contrast those firms for whom productivity growth is related to greater use of intangible assets, compared with those for whom productivity is linked to cash flow. Productivity of inward investors is driven by cash flow rather than intangible assets, these being limited to high-technology investors from the EU and the USA.