Regional foreign direct investment and wage spillovers:plant level evidence from the UK electronics industry

This paper examines the extent to which foreign investment in the UK generates wage spillovers in the domestic sector of the economy using a simultaneous dynamic panel data model and focusing on the electronics sector, possibly the most ‘globalized’ sector of UK manufacturing. It finds evidence that the higher wages paid by foreign firms cause wages in the domestic sector to be bid up. This phenomenon is, however, largely confined to the region where foreign direct investment takes place.

Multinational enterprises and technological effort by local firms:a case study of the Malaysian electronics and electrical industry

It is often assumed that foreign MNEs are the driving force behind technological development in developing economies but it has become evident in recent years that the actions of MNEs in isolation from the domestic economy. The study, therefore, examines the determinants of local firms' decisions to undertake technological effort, not only in isolation, but also in the context of linkages between domestic firms and MNEs. There is evidence that linkages between MNEs and local firms are important in explaining technological effort by local firms but direct technological assistance from MNEs does not seem to play a major role in fostering increased technological effort by local firms.

Optimal production planning for PCB assembly

It is indisputable that printed circuit boards (PCBs) play a vital role in our daily lives. With the ever-increasing applications of PCBs, one of the crucial ways to increase a PCB manufacturer’s competitiveness in terms of operation efficiency is to minimize the production time so that the products can be introduced to the market sooner. Optimal Production Planning for PCB Assembly is the first book to focus on the optimization of the PCB assembly lines’ efficiency. This is done by: • integrating the component sequencing and the feeder arrangement problems together for both the pick-and-place machine and the chip shooter machine; • constructing mathematical models and developing an efficient and effective heuristic solution approach for the integrated problems for both types of placement machines, the line assignment problem, and the component allocation problem; and • developing a prototype of the PCB assembly planning system. The techniques proposed in Optimal Production Planning for PCB Assembly will enable process planners in the electronics manufacturing industry to improve the assembly line’s efficiency in their companies. Graduate students in operations research can familiarise themselves with the techniques and the applications of mathematical modeling after reading this advanced introduction to optimal production planning for PCB assembly.

The impact of foreign direct investment on labour productivity in the Chinese electronics industry

Foreign direct investment (FDI) may have a positive impact on labour productivity in recipient industries through direct introduction of capital, technology and management skills and indirectly through spillover effects on domestic firms. This study uses a model intended to examine the overall effects of inward FDI in the Chinese electronics industry. Official data are used for 41 sub-sectors of the industry in 1996 and 1997 having differing levels of FDI. Labour productivity is modelled as dependent on the degree of foreign presence in the industry and other variables, namely capital intensity, human capital and firm size for scale factors. The econometric results suggest that foreign presence in the industry is associated with higher labour productivity. © 2001 Elsevier Science Ltd.

The impact of the post-1993 economic reforms on Chinese state-owned enterprises:evidence from the electronics industry

Since 1979, China has embarked on a series of economic reform programmes, leading its socialist economy away from a Soviet planning model towards a much greater reliance on the market. In the course of the last twenty years, the Chinese economy has enjoyed a phenomenally high economic growth rate. However, earlier research suggests that Chinese state-owned enterprises remain a financial 'black hole' for the Chinese economy, in spite of various enterprise reform measures. This thesis tries to assess the impact of the reforms after 1993, especially the so-called Modern Enterprise System, on the behaviour and management practices of state firms. The central research question is whether the new rounds of economic reform have changed state firms into commercial entities operating according to market signals, as intended. In order to explore this question, an institutional approach is employed. More specifically, the thesis examines how the behaviour and management practices of state enterprises have changed with changes in the institutional environmental resulting from the introduction of new reform measures and especially the MES. The main evidence used in this research comes from the Chinese electronics industry (CEI). Non-state firms, namely collectives and joint ventures, are involved in the study to provide a benchmark against which changes in the behaviour of state firms in the mid and late 1990s are compared. A comparative statistical analysis shows that state-owned firms, both traditional and corporatised ones, still lag behind collectives and joint ventures in terms of both labour and total factor productivity. The further empirical work of this research consists of a questionnaire survey and case studies that are based on interviews with senior managers of 17 firms in the CEI. The findings of these analyses suggest that there has been little fundamental change in the behaviour pattern of state firms in the 1990s, despite the introduction of the Modern Enterprise System, and that the economic reforms after 1993 so far seem to have failed to transform the state firms into commercial entities operating according to market signals.

Vibration analysis of a printed circuit board

The reliability of the printed circuit board assembly under dynamic environments, such as those found onboard airplanes, ships and land vehicles is receiving more attention. This research analyses the dynamic characteristics of the printed circuit board (PCB) supported by edge retainers and plug-in connectors. By modelling the wedge retainer and connector as providing simply supported boundary condition with appropriate rotational spring stiffnesses along their respective edges with the aid of finite element codes, accurate natural frequencies for the board against experimental natural frequencies are obtained. For a PCB supported by two opposite wedge retainers and a plug-in connector and with its remaining edge free of any restraint, it is found that these real supports behave somewhere between the simply supported and clamped boundary conditions and provide a percentage fixity of 39.5% more than the classical simply supported case. By using an eigensensitivity method, the rotational stiffnesses representing the boundary supports of the PCB can be updated effectively and is capable of representing the dynamics of the PCB accurately. The result shows that the percentage error in the fundamental frequency of the PCB finite element model is substantially reduced from 22.3% to 1.3%. The procedure demonstrated the effectiveness of using only the vibration test frequencies as reference data when the mode shapes of the original untuned model are almost identical to the referenced modes/experimental data. When using only modal frequencies in model improvement, the analysis is very much simplified. Furthermore, the time taken to obtain the experimental data will be substantially reduced as the experimental mode shapes are not required.In addition, this thesis advocates a relatively simple method in determining the support locations for maximising the fundamental frequency of vibrating structures. The technique is simple and does not require any optimisation or sequential search algorithm in the analysis. The key to the procedure is to position the necessary supports at positions so as to eliminate the lower modes from the original configuration. This is accomplished by introducing point supports along the nodal lines of the highest possible mode from the original configuration, so that all the other lower modes are eliminated by the introduction of the new or extra supports to the structure. It also proposes inspecting the average driving point residues along the nodal lines of vibrating plates to find the optimal locations of the supports. Numerical examples are provided to demonstrate its validity. By applying to the PCB supported on its three sides by two wedge retainers and a connector, it is found that a single point constraint that would yield maximum fundamental frequency is located at the mid-point of the nodal line, namely, node 39. This point support has the effect of increasing the structure's fundamental frequency from 68.4 Hz to 146.9 Hz, or 115% higher.

Electronics:a case study of economic value added in target costing

Whilst target costing and strategic management accounting (SMA) continue to be of considerable interest to academic accountants, both suffer from a relative dearth of empirically based research. Simultaneously, the subject of economic value added (EVA) has also been the subject of little research at the level of the individual firm.The aim of this paper is to contribute to both the management accounting and value based management literatures by analysing how one major European based MNC introduced EVA into its target costing system. The case raises important questions about both the feasibility of cascading EVA down to product level and the compatibility of customer facing versus shareholder focused systems of performance management. We provide preliminary evidence that target costing can be used to align both of these perspectives, and when combined with other SMA techniques it can serve as " the bridge connecting strategy formulation with strategy execution and profit generation" ( Ansari et al., 2007, p. 512). © 2012 Elsevier Ltd.

Dziedziak v Future Electronics Ltd

Case law report - online

Market-driven strategies and the design of flexible production systems: evidence from the electronics industry

Links the concept of market-driven business strategies with the design of production systems. It draws upon the case of a firm which, during the last decade, changed its strategy from being “technology led” to “market driven”. The research, based on interdisciplinary fieldwork involving long-term participant observation, investigated the factors which contribute to the successful design and implementation of flexible production systems in electronics assembly. These investigations were conducted in collaboration with a major computer manufacturer, with other electronics firms being studied for comparison. The research identified a number of strategies and actions seen as crucial to the development of efficient flexible production systems, namely: effective integration of subsystems, development of appropriate controls and performance measures, compatibility between production system design and organization structure, and the development of a climate conducive to organizational change. Overall, the analysis suggests that in the electronics industry there exists an extremely high degree of environmental complexity and turbulence. This serves to shape the strategic, technical and social structures that are developed to match this complexity, examples of which are niche marketing, flexible manufacturing and employee harmonization.

A design and implementation methodology for high variety electronics assembly systems

Small indigenous manufacturers of electronic equipment are coming under increasingly severe pressure to adopt a strong defensive position against large multinational and Far Eastern companies. A common response to this threat has been for these firms to adopt a 'market driven' business strategy based on quality and customer service, rather than a 'technology led' strategy which uses technical specification and price to compete. To successfully implement this type of strategy there is a need for production systems to be redesigned to suit the new demands of marketing. Increased range and fast response require economy of scope rather t ban economy or scale while the organisation's culture must promote quality and process consciousness. This paper describes the 'Modular Assembly Cascade' concept which addresses these needs by applying the principles of flexible manufacturing (FMS) and just in time (,JlT) to electronics assembly. A methodology for executing the concept is also outlined. This is called DRAMA (Design Houtirw !'or· Adopting Modular Assembly).

Design and implementation of production systems for high variety electronics assembly

Information technology companies are having to broaden their overall strategic view in deference to the premise that it is better to be market-driven than technology-led. Cost and technical performance are no longer the only considerations, as quality and service now demand equal recognition. The production of a high volume single item has given way to that of low volume multiple items, which in turn requires some modification of production systems and brings flexible manufacturing, Just-in-Time production and total quality control into sharper focus for the achievement of corporate objectives.

Development of a risk-oriented strategic sourcing (ROSS) framework for the construction and electronics manufacturing industries

Strategic sourcing has increased in importance in recent years, and now plays an important role in companies’ planning. The current volatility in supply markets means companies face multiple challenges involving lock-in situations, supplier bankruptcies or supply security issues. In addition, their exposure can increase due to natural disasters, as witnessed recently in the form of bird flu, volcanic ash and tsunamis. Therefore, the primary focus of this study is risk management in the context of strategic sourcing. The study presents a literature review on sourcing based on the 15 years from 1998–2012, and considers 131 academic articles. The literature describes strategic sourcing as a strategic, holistic process in managing supplier relationships, with a long-term focus on adding value to the company and realising competitive advantage. Few studies discovered the real risk impact and status of risk management in strategic sourcing, and evaluation across countries and industries was limited, with the construction sector particularly under-researched. This methodology is founded on a qualitative study of twenty cases across Ger-many and the United Kingdom from the construction sector and electronics manufacturing industries. While considering risk management in the context of strategic sourcing, the thesis takes into account six dimensions that cover trends in strategic sourcing, theoretical and practical sourcing models, risk management, supply and demand management, critical success factors and the strategic supplier evaluation. The study contributes in several ways. First, recent trends are traced and future needs identified across the research dimensions of countries, industries and companies. Second, it evaluates critical success factors in contemporary strategic sourcing. Third, it explores the application of theoretical and practical sourcing models in terms of effectiveness and sustainability. Fourth, based on the case study findings, a risk-oriented strategic sourcing framework and a model for strategic sourcing are developed. These are based on the validation of contemporary requirements and a critical evaluation of the existing situation. It contemplates the empirical findings and leads to a structured process to manage risk in strategic sourcing. The risk-oriented framework considers areas such as trends, corporate and sourcing strategy, critical success factors, strategic supplier selection criteria, risk assessment, reporting, strategy alignment and reporting. The proposed model highlights the essential dimensions in strategic sourcing and guides us to a new definition of strategic sourcing supported by this empirical study.

Scavenging of halogen in recycling of halogen-based polymer materials

Pyrolytic recycling of materials for electronics and automotive is attractive because of the possibility of recovery of fuel and of precious metals from printed circuit. Due to the complexity of their composition an appropriate pre-treatment has to be performed in order to limit the evolution of dangerous halogen containing compounds which strongly impair the fuel quality. An advantageous pyrolysis approach implies the attempt of mineralisation of the organic bromine to the not volatile and harmless inorganic form using strong bases such as NaOH and KOH to reduce the amount of volatile and increasing the residue. The char stability is greatly variable depending on the substrate. Mg(OH)2 and Ca(OH)2 behave in a similar manner but to a lower extent. Carbonates and reducing agent such as LiAlH have been tested as well and their ability to scavenge bromine is discussed in terms of effectiveness and mechanism.