Climate change and construction sector SMEs:vulnerability, consequences and resilience

Climate change has become one of the prime challenges the society has to face in the future. As far as businesses are concerned, it also has added one other important issue that they have to consider as part of their business planning. Climate change is of significant importance particularly to the Small and Medium-sized enterprises (SMEs), which are considered as the most vulnerable among the business community to the effects of climate change. This paper presents the findings of a literature review conducted with the aim of identifying the specific importance of climate change to the construction sector SMEs. The objectives of the paper are to identify the vulnerability of construction sector SMEs to the effects of climate change, their consequences and also to identify the importance of improving resilience and implementing adaptive measures to manage these issues. The paper also outlines the directions of a study undertaken to address these issues as part of an EPSRC funded research project titled “Community Resilience to Extreme Weather Events – CREW”. The paper concludes by stressing the importance of improving the resilience of construction sector SMEs to climate change effects and also the importance of collective action in this regard.

Simultaneous clock recovery and data regeneration using a nonlinear optical loop mirror as an all-optical mixer

High-speed optical clock recovery, demultiplexing and data regeneration will be integral parts of any future photonic network based on high bit-rate OTDM. Much research has been conducted on devices that perform these functions, however to date each process has been demonstrated independently. A very promising method of all-optical switching is that of a semiconductor optical amplifier-based nonlinear optical loop mirror (SOA-NOLM). This has various advantages compared with the standard fiber NOLM, most notably low switching power, compact size and stability. We use the SOA-NOLM as an all-optical mixer in a classical phase-locked loop arrangement to achieve optical clock recovery, while at the same time achieving data regeneration in a single compact device

Neuronal convergence in early contrast vision: binocular summation is followed by response nonlinearity and area summation

We assessed summation of contrast across eyes and area at detection threshold ( C t). Stimuli were sine-wave gratings (2.5 c/deg) spatially modulated by cosine- and anticosine-phase raised plaids (0.5 c/deg components oriented at ±45°). When presented dichoptically the signal regions were interdigitated across eyes but produced a smooth continuous grating following their linear binocular sum. The average summation ratio ( C t1/([ C t1+2]) for this stimulus pair was 1.64 (4.3 dB). This was only slightly less than the binocular summation found for the same patch type presented to both eyes, and the area summation found for the two different patch types presented to the same eye. We considered 192 model architectures containing each of the following four elements in all possible orders: (i) linear summation or a MAX operator across eyes, (ii) linear summation or a MAX operator across area, (iii) linear or accelerating contrast transduction, and (iv) additive Gaussian, stochastic noise. Formal equivalences reduced this to 62 different models. The most successful four-element model was: linear summation across eyes followed by nonlinear contrast transduction, linear summation across area, and late noise. Model performance was enhanced when additional nonlinearities were placed before binocular summation and after area summation. The implications for models of probability summation and uncertainty are discussed.

Response normalization and blur adaptation:data and multi-scale model

Adapting to blurred or sharpened images alters perceived blur of a focused image (M. A. Webster, M. A. Georgeson, & S. M. Webster, 2002). We asked whether blur adaptation results in (a) renormalization of perceived focus or (b) a repulsion aftereffect. Images were checkerboards or 2-D Gaussian noise, whose amplitude spectra had (log-log) slopes from -2 (strongly blurred) to 0 (strongly sharpened). Observers adjusted the spectral slope of a comparison image to match different test slopes after adaptation to blurred or sharpened images. Results did not show repulsion effects but were consistent with some renormalization. Test blur levels at and near a blurred or sharpened adaptation level were matched by more focused slopes (closer to 1/f) but with little or no change in appearance after adaptation to focused (1/f) images. A model of contrast adaptation and blur coding by multiple-scale spatial filters predicts these blur aftereffects and those of Webster et al. (2002). A key proposal is that observers are pre-adapted to natural spectra, and blurred or sharpened spectra induce changes in the state of adaptation. The model illustrates how norms might be encoded and recalibrated in the visual system even when they are represented only implicitly by the distribution of responses across multiple channels.

The response to and effects of microcomputers in the education sector:the introduction of an innovation in local authority secondary schools

The study addresses the introduction of an innovation of new technology into a bureaucratic profession. The organisational setting is that of local authority secondary schools at a time at which microcomputers were being introduced in both the organisational core (for teaching) and its periphery (school administration). The research studies innovation-adopting organisations within their sectoral context; key actors influencing the innovation are identified at the levels of central government, local government and schools.A review of the literature on new technology and innovation (including educational innovation), and on schools as organisations in a changing environment leads to the development of the conceptual framework of the study using a resource dependency model within a cycle of the acquisition, allocation and utilisation of financial, physical and intangible resources. The research methodology is longitudinal and draws from both positivist and interpretive traditions. lt includes an initial census of the two hundred secondary schools in four local education authorities, a final survey of the same population, and four case studies, using both interview methods and documentation. Two modes of innovation are discerned. In respect of administrative use a rationalising, controlling mode is identified, with local education authorities developing standardised computer-assisted administrative systems for use in schools. In respect of curricular use, in contrast, teachers have been able to maintain an indeterminate occupational knowledge base, derived from an ideology of professionalism in respect of the classroom use of the technology. The mode of innovation in respect of curricular use has been one of learning and enabling. The resourcing policies of central and local government agencies affect the extent of use of the technology for teaching purposes, but the way in which it is used is determined within individual schools, where staff with relevant technical expertise significantly affect the course of the innovation.

Simultaneous clock recovery and data regeneration using a nonlinear optical loop mirror as an all-optical mixer

High-speed optical clock recovery, demultiplexing and data regeneration will be integral parts of any future photonic network based on high bit-rate OTDM. Much research has been conducted on devices that perform these functions, however to date each process has been demonstrated independently. A very promising method of all-optical switching is that of a semiconductor optical amplifier-based nonlinear optical loop mirror (SOA-NOLM). This has various advantages compared with the standard fiber NOLM, most notably low switching power, compact size and stability. We use the SOA-NOLM as an all-optical mixer in a classical phase-locked loop arrangement to achieve optical clock recovery, while at the same time achieving data regeneration in a single compact device

Phenobarbital for neonatal seizures:response rate and predictors of refractoriness

Background : Phenobarbital is the first-line choice for neonatal seizures treatment, despite a response rate of approximately 45%. Failure to respond to acute anticonvulsants is associated with poor neurodevelopmental outcome, but knowledge on predictors of refractoriness is limited. Objective : To quantify response rate to phenobarbital and to establish variables predictive of its lack of efficacy. Methods : We retrospectively evaluated newborns with electrographically confirmed neonatal seizures admitted between January 1999 and December 2012 to the neonatal intensive care unit of Parma University Hospital (Italy), excluding neonates with status epilepticus. Response was categorized as complete (cessation of clinical and electrographic seizures after phenobarbital administration), partial (reduction but not cessation of electrographic seizures with the first bolus, response to the second bolus), or absent (no response after the second bolus). Multivariate analysis was used to identify independent predictors of refractoriness. Results : Out of 91 newborns receiving phenobarbital, 57 (62.6%) responded completely, 15 (16.5%) partially, and 19 (20.9%) did not respond. Seizure type (p = 0.02), background electroencephalogram (EEG; p ≤ 0.005), and neurologic examination (p ≤ 0.005) correlated with response to phenobarbital. However, EEG (p ≤ 0.02) and seizure type (p ≤ 0.001) were the only independent predictors. Conclusion : Our results suggest a prominent role of neurophysiological variables (background EEG and electrographic-only seizure type) in predicting the absence of response to phenobarbital in high-risk newborns.

The need for and improvement of budgetary planning in a multinational corporation

The aim of this research is to improve the planning methodology of Dunlop via an analysis of their annual planning system. This was approached via an investigation of how the plans were developed; extensive interviews, which analysed divisional attitudes and approaches to planning; an analysis of forecast accuracy; and participation in the planning system itself. These investigations revealed certain deficiencies in the operating of the system. In particular, little evidence of formal planning could be found, and some divisions were reacting ex post to the market, rather than planning ex ante. The resulting plans tended to lack resilience and were generally unrealistic, partly because of imposed targets. Similarly, because the links between the elements of the system were often inefficient, previously agreed strategies were not always implemented. The analysis of forecast accuracy in the plans revealed divisions to be poor at most aspects of forecasting. Simple naive models often outperformed divisional forecasts, and much of the error was attributed to systematic, and therefore eliminable factors. These analyses suggested the need for a new system which is proposed in the form of Budgetary Planning. This system involves conceptual changes within the current planning framework. Such changes aim to revise tactical planning in order to meet the needs placed on it by. in particular, strategic planning. Budgetary Planning is an innovation in terms of the current planning literature. It is a total system of annual planning aimed at implementing and controlling the iteratively agreed strategies within the current environment. This is achieved by the generation of tactical alternatives, variable funding and concentration of forecast credibility, all of which aid both the realism and the resilience of planning.

Resilience and adaptation of small and medium-sized enterprises to flood risk

Purpose – The UK has experienced a number of flood events in recent years, and the intensity and frequency of such events are forecast to further increase in future due to changing climatic conditions. Accordingly, enhancing the resilience of small and medium-sized enterprises (SMEs) – which form an important segment in a society – to flood risk, has emerged as an important issue. However, SMEs often tend to underestimate the risk of flooding which tends to have a low priority in their business agenda. The purpose of this paper is to undertake an investigation of adaptation to the risk of flooding considering community-level measures, individual-level property protection, and business continuity and resilience measures. Design/methodology/approach – A total of four short case studies were conducted among SMEs to identify their response to flood risk, and what measures have been undertaken to manage the risk of flooding. Findings – It was observed that SMEs have implemented different property-level protection measures and generic business continuity/risk management measures, based on their requirements, to achieve a desired level of protection. Practical implications – SMEs are likely to positively respond to property-level adaptation following a post-flood situation. It is important that information such as costs/benefits of such measures and different options available are made accessible to SMEs affected by a flood event. Social implications – Implementation of property-level adaptation measures will contribute towards the long term adaptation of the existing building stock to changing climatic conditions. Originality/value – The paper contributes towards policy making on flood risk adaptation and SME decision making, and informs policy makers and practitioners.

Drop and insert multiplexing with simultaneous clock recovery using an electroabsorption modulator

A three-node optical time-division multiplexing (OTDM) network is demonstrated that utilizes electroabsorption (EA) modulators as the core elements. Each node is self contained and performs its own clock recovery and synchronization. “Drop and insert” functionality is demonstrated for the first time with an EA modulator by completely removing a 10-Gb/s channel from a 40-Gb/s OTDM data stream. A different 10-Gb/s channel was subsequently inserted into the vacant time slot. Clock recovery is achieved by using an EA modulator in a novel bidirectional configuration. Bit-error-rate (BER) measurements are presented for each of the 10-Gb/s OTDM channels.

Manipulation of the surface pegylation in combination with reduced vesicle size of cationic liposomal adjuvants modifies their clearance kinetics from the injection site, and the rate and type of T cell response

The mechanism behind the immunostimulatory effect of the cationic liposomal vaccine adjuvant dimethyldioctadecylammonium and trehalose 6,6′- dibehenate (DDA:TDB) has been linked to the ability of these cationic vesicles to promote a depot after administration, with the liposomal adjuvant and the antigen both being retained at the injection site. This can be attributed to their cationic nature, since reduction in vesicle size does not influence their distribution profile yet neutral or anionic liposomes have more rapid clearance rates. Therefore the aim of this study was to investigate the impact of a combination of reduced vesicle size and surface pegylation on the biodistribution and adjuvanticity of the formulations, in a bid to further manipulate the pharmacokinetic profiles of these adjuvants. From the biodistribution studies, it was found that with small unilamellar vesicles (SUVs), 10% PEGylation of the formulation could influence liposome retention at the injection site after 4 days, whilst higher levels (25 mol%) of PEG blocked the formation of a depot and promote clearance to the draining lymph nodes. Interestingly, whilst the use of 10% PEG in the small unilamellar vesicles did not block the formation of a depot at the site of injection, it did result in earlier antibody response rates and switch the type of T cell responses from a Th1 to a Th2 bias suggesting that the presence of PEG in the formulation not only control the biodistribution of the vaccine, but also results in different types of interactions with innate immune cells. © 2012 Elsevier B.V.