Solitons: permanent waves

Communications engineers are learning to create an electromagnet wave at will, to transmit information. This wave, the optical soliton, is the subject of astounding recent developments in nonlinear optics and lasers. The author describes the principles behind the use of solitons in optical communications and shows that in the context of such communications the most important property of solitons is that they are extremely stable. Not only do they not disperse, but an encounter with a perturbation (e.g. a joint in optical fibre) will usually leave the soliton unaltered.

Disentangle contextual and permanent individual motivations:an application to shopping behavior

Past studies resulted in conflicting definitions of consumer motivation. On the one hand, motivations are seen as the consumer’s characteristics that shape her general behavior (motivational trait). On the other hand, they are seen as contextual variables representing the reason why the individual is behaving specific to today’s context (motivational state). The objective of this research is to stress the difference between these two concepts and to understand the impact of each on consumer behavior. We applied our empirical study to shopping motivations; our results show a strong interaction between motivational trait and motivational state. Problem and Hypothesis On the one hand, Westbrook and Black (1985) consider shopping motivations as individual permanent characteristics. This concept is shared by other researchers (Rohm and Swaminathan 2004), which show that some shoppers are functional (they shop for convenience, information seeking, and time saving) while some others are hedonic (they shop for social interaction, bargain hunting and browsing). On the other hand, Kaltcheva and Weitz (2006) define motivations as a contextual orientation changing over time, depending on the situation, and show that contextual shopping motivations have a strong impact on shopping behavior. From our knowledge, no research specifically examined the respective impact of both these shopping motivation types. To deal with this issue, we used the notions of “traits” and “states” that have been largely used in marketing research to designate respectively a permanent characteristic of the individual and a temporary orientation of the consumer (Mowen 2000). The reversal theory (Apter 2001) suggests that two opposite states exist: the telic and the paratelic states. In the telic state, individuals set goals for themselves, must be disciplined to reach these goals, and do not behave in accordance with their personal trait. In the paratelic state, individuals are seeking arousal and enjoyment, do not set rules, and one could postulate that they act in accordance with their natural tendencies. Based on these considerations, we hypothesize the following process: in situations involving paratelic states, hedonic as well as functional individuals should behave according to their natural traits, whereas in situations involving telic states, hedonic people should inhibit their natural propensity to enjoy shopping and behave similarly to functional people. Hence, we postulate the following: Hypothesis: Compared to shoppers with functional motivational trait, shoppers with hedonic motivational trait will a) significantly display more hedonic shopping behavior intentions in a condition of paratelic motivational state, and b) not display more hedonic shopping behavior intentions in a condition a telic motivational state Empirical Research First, 108 participants were asked to fill a multi-items scale about their shopping habits, which actually measured their shopping motivational traits. This questionnaire allowed us to highlight four different dimensions in shopping motivational traits: social interaction, novelty/utility seeking, bargain hunting, and browsing. According to their scores on different items, participants were classified as functional or as hedonic on each of these four dimensions (a single individual may be hedonic on some dimensions and functional on others). Then, participants were then induced to adopt either a telic or a paratelic shopping motivational state while reading an appropriate scenario. Finally, participants were asked for their shopping behavior intentions in response to the shopping context. Four items were developed, corresponding to the four shopping motivational trait dimensions we found with our factor analysis. Results As we found four dimensions in shopping motivational trait, we set up four quasi-experimental designs to capture the entire phenomenon: for each dimension, a 2 (motivational trait) x 2 (motivational state) design was built, where the dependant variable was the shopping behavior element corresponding to the studied dimension. Four 2 x 2 Anovas were performed to assess the interaction between motivational trait and motivational state. Concerning the three dimensions - browsing, novelty/utility seeking, and bargain hunting- , in the paratelic state scenario participants with hedonic motivational trait displayed significantly more hedonic shopping behavior intentions than participants with a functional motivational trait (resp. F = 9.701, p = .003; F = 4.979, p = .03; F = 5.757, p = .02); and in the telic state scenario, there was no significant difference in behavior intentions between participants with hedonic or functional motivation trait. Each time, the interaction effect between motivational state and motivational trait was significant (resp. F = 4.859, p = .03; F = 3.314, p = .07; F = 2.98, p = .08). Concerning the fourth dimension, social interaction, shopping behavior intentions of participants with hedonic and with functional motivational traits were significantly different in the paratelic state scenario (F = 29.898, p <.000) as well as in the telic state scenario (F = 9.559, p = .003). However, the interaction effect showed that this behavioral difference was significantly stronger in the paratelic scenario. All these results support our research hypothesis. Discussion and Implications Our study provides consistent support for our hypotheses saying that there is an interaction effect between shopping motivational states and shopping motivational traits. The generalization of the results is strengthened by the study of four different shopping traits: social interaction, novelty/utility seeking, bargain hunting and browsing. As we proposed, when shopping in a goal-oriented state (telic state), behaviors of hedonic and functional shoppers do not differ significantly. Conversely, when shopping for a recreational reason (paratelic state), hedonic and functional shoppers behave significantly different. These results could explain why some previous studies concluded that shopping motivational traits had no impact on shopping behavior: they did not take into consideration the interaction between motivational trait and motivational state. Moreover, our study shows that marketing surveys performed by store managers to draw the personal profile of their customers must be crossed with contextual motivations in order to accurately forecast shopper behavior. Future Developments Our results can be explained by the self-control process, which pushes hedonic-trait shoppers to behave in a rather functional way in utilitarian situations. However, to be certain that this is the very process that occurs, we plan to add self-control perception scales to our existing measures. This is obviously the next step of this research.

Disentangle contextual and permanent individual motivations:an application to shopping behavior

Past studies resulted in conflicting definitions of consumer motivation. Motivations are seen either as the consumer? s characteristics that shape her general behavior (motivational trait), or as contextual variables representing the reason why the individual is behaving specific to today?s context (motivational state). The objective of this research is to understand the impact of each on consumer behavior. Applied to shopping motivations, our study shows a strong interaction between motivational trait and state: motivational traits influence behavior only when associated with a recreational motivational state. In a functional motivational state, individuals prevent their personal characteristics from being fully expressed.

Ethics and social responsibility - do HR professionals have the ‘courage to challenge’ or are they set to be permanent ‘bystanders'?

This paper considers the role of HR in ethics and social responsibility and questions why, despite an acceptance of a role in ethical stewardship, the HR profession appears to be reluctant to embrace its responsibilities in this area. The study explores how HR professionals see their role in relation to ethical stewardship of the organisation, and the factors that inhibit its execution. A survey of 113 UK-based HR professionals, working in both domestic and multinational corporations, was conducted to explore their perceptions of the role of HR in maintaining ethical and socially responsible action in their organisations, and to identify features of the organisational environment which might help or hinder this role being effectively carried out. The findings indicate that although there is a clear understanding of the expectations of ethical stewardship, HR professionals often face difficulties in fulfilling this role because of competing tensions and perceptions of their role within their organisations. A way forward is proposed, which draws on the positive individual factors highlighted in this research to explore how approaches to organisational development (through positive deviance) may reduce these tensions to enable the better fulfilment of ethical responsibilities within organisations. The involvement and active modelling of ethical behaviour by senior management, coupled with an open approach to surfacing organisational values and building HR procedures, which support socially responsible action, are crucial to achieving socially responsible organisations. Finally, this paper challenges the HR profession, through professional and academic institutions internationally, to embrace their role in achieving this. © 2013 Taylor & Francis.

Design optimization of short-stroke single-phase tubular permanent-magnet motor for refrigeration applications

This paper describes a design methodology to achieve optimal performance for a short-stroke single-phase tubular permanent-magnet motor which drives a reciprocating vapor compressor. The steady-state characteristic of the direct-drive linear-motor compressor system is analyzed, an analytical formula for predicting iron loss is presented, and a motor-design procedure which takes into account the effect of compressor loads under nominal operating condition is formulated. It is shown that the motor efficiency can be optimized with respect to two leading dimensional ratios. Experimental results validate the proposed design methodology. Copyright © 2010 IEEE.

Solitons: permanent waves

Communications engineers are learning to create an electromagnet wave at will, to transmit information. This wave, the optical soliton, is the subject of astounding recent developments in nonlinear optics and lasers. The author describes the principles behind the use of solitons in optical communications and shows that in the context of such communications the most important property of solitons is that they are extremely stable. Not only do they not disperse, but an encounter with a perturbation (e.g. a joint in optical fibre) will usually leave the soliton unaltered.

Analysis of single and multiple, non-permanent, tunable, birefringent spectral holes in a fibre-Bragg grating stop-band produced via uniaxial pressure

We present an experimental and numerical study of transversely loaded uniform fibre-Bragg gratings. A novel loading configuration is described, producing pressure-induced spectral holes in an initially strong uniform grating. The birefringence properties of these gratings are analysed. It is shown that the frequency splitting of the two spectral holes, corresponding to two orthogonal polarisation states, can be adjusted precisely using this loading configuration. We finally demonstrate a new and simple scheme to induce multiple spectral holes in the stop-band. © 2003 Elsevier Science B.V. All rights reserved.

Characterizing permanent deformation and fracture of asphalt mixtures by using compressive dynamic modulus tests

Permanent deformation and fracture may develop simultaneously when an asphalt mixture is subjected to a compressive load. The objective of this research is to separate viscoplasticity and viscofracture from viscoelasticity so that the permanent deformation and fracture of the asphalt mixtures can be individually and accurately characterized without the influence of viscoelasticity. The undamaged properties of 16 asphalt mixtures that have two binder types, two air void contents, and two aging conditions are first obtained by conducting nondestructive creep tests and nondestructive dynamic modulus tests. Testing results are analyzed by using the linear viscoelastic theory in which the creep compliance and the relaxation modulus are modeled by the Prony model. The dynamic modulus and phase angle of the undamaged asphalt mixtures remained constant with the load cycles. The undamaged asphalt mixtures are then used to perform the destructive dynamic modulus tests in which the dynamic modulus and phase angle of the damaged asphalt mixtures vary with load cycles. This indicates plastic evolution and crack propagation. The growth of cracks is signaled principally by the increase of the phase angle, which occurs only in the tertiary stage. The measured total strain is successfully decomposed into elastic strain, viscoelastic strain, plastic strain, viscoplastic strain, and viscofracture strain by employing the pseudostrain concept and the extended elastic-viscoelastic correspondence principle. The separated viscoplastic strain uses a predictive model to characterize the permanent deformation. The separated viscofracture strain uses a fracture strain model to characterize the fracture of the asphalt mixtures in which the flow number is determined and a crack speed index is proposed. Comparisons of the 16 samples show that aged asphalt mixtures with a low air void content have a better performance, resisting permanent deformation and fracture. © 2012 American Society of Civil Engineers.

Antisymmetric distribution of permanent refractive index change in β-BaB2O4 crystal under exposure of femtosecond pulses

We have observed unusual asymmetrical refractive index change as a result of femtosecond laser inscription in a crystal without center of inversion. Profile of the refractive index change exhibits sign turn within the domain of femtosecond pulse exposure. © Owned by the authors, published by EDP Sciences, 2013.

Permanent magnet synchronous generator based wind power generation system fault protection schemes

The PMSG-based wind power generation system protection is presented in this paper. For large-scale systems, a voltagesource converter rectifier is included. Protection circuits for this topology are studied with simulation results for cable permanent fault conditions. These electrical protection methods are all in terms of dumping redundant energy resulting from disrupted path of power delivery. Pitch control of large-scale wind turbines are considered for effectively reducing rotor shaft overspeed. Detailed analysis and calculation of damping power and resistances are presented. Simulation results including fault overcurrent, DC-link overvoltage and wind turbine overspeed are shown to illustrate the system responses under different protection schemes to compare their application and effectiveness.

Permanent matching of coupled optical bottle resonators with better than 0.16 GHz precision

The fabrication precision is one of the most critical challenges to the creation of practical photonic circuits composed of coupled high Q-factor microresonators. While very accurate transient tuning of microresonators based on local heating has been reported, the record precision of permanent resonance positioning achieved by post-processing is still within 1 and 5 GHz. Here we demonstrate two coupled bottle microresonators fabricated at the fiber surface with resonances that are matched with a better than 0.16 GHz precision. This corresponds to a better than 0.17 Å precision in the effective fiber radius variation. The achieved fabrication precision is only limited by the resolution of our optical spectrum analyzer and can be potentially improved by an order of magnitude.

Electromagnetic design and loss calculations of a 1.12-MW high-speed permanent-magnet motor for compressor applications

Electromagnetic design of a 1.12-MW, 18 000-r/min high-speed permanent-magnet motor (HSPMM) is carried out based on the analysis of pole number, stator slot number, rotor outer diameter, air-gap length, permanent magnet material, thickness, and pole arc. The no-load and full-load performance of the HSPMM is investigated in this paper by using 2-D finite element method (FEM). In addition, the power losses in the HSPMM including core loss, winding loss, rotor eddy current loss, and air friction loss are predicted. Based on the analysis, a prototype motor is manufactured and experimentally tested to verify the machine design.

Evaluation of applying retaining shield rotor for high-speed interior permanent magnet motors

This paper proposes a novel rotor structure for high-speed interior permanent magnet motors to overcome huge centrifugal forces under high-speed operation. Instead of the conventional axial stacking of silicon-steel laminations, the retaining shield rotor is inter-stacked by high-strength stainless-steel plates to enhance the rotor strength against the huge centrifugal force. Both mechanical characteristics and electromagnetic behaviors of the retaining shield rotor are analyzed using finite-element method in this paper. Prototypes and experimental results are demonstrated to evaluate the performance. The analysis and test results show that the proposed retaining shield rotor could effectively enhance the rotor strength without a significant impact on the electromagnetic performance, while some design constraints should be compromised.

Design and flux-weakening control of an interior permanent magnet synchronous motor for electric vehicles

Permanent magnet synchronous motors (PMSMs) provide a competitive technology for EV traction drives owing to their high power density and high efficiency. In this paper, three types of interior PMSMs with different PM arrangements are modeled by the finite element method (FEM). For a given amount of permanent magnet materials, the V shape interior PMSM is found better than the U-shape and the conventional rotor topologies for EV traction drives. Then the V shape interior PMSM is further analyzed with the effects of stator slot opening and the permanent magnet pole chamfering on cogging torque and output torque performance. A vector-controlled flux-weakening method is developed and simulated in matlab to expand the motor speed range for EV drive system. The results show good dynamic and steady-state performance with a capability of expanding speed up to 4 times of the rated. A prototype of the V shape interior PMSM is also manufactured and tested to validate the numerical models built by the finite element method.