A performance assessment method for hospitals:the case of municipal hospitals in Angola

Over 60% of the recurrent budget of the Ministry of Health (MoH) in Angola is spent on the operations of the fixed health care facilities (health centres plus hospitals). However, to date, no study has been attempted to investigate how efficiently those resources are used to produce health services. Therefore the objectives of this study were to assess the technical efficiency of public municipal hospitals in Angola; assess changes in productivity over time with a view to analyzing changes in efficiency and technology; and demonstrate how the results can be used in the pursuit of the public health objective of promoting efficiency in the use of health resources. The analysis was based on a 3-year panel data from all the 28 public municipal hospitals in Angola. Data Envelopment Analysis (DEA), a non-parametric linear programming approach, was employed to assess the technical and scale efficiency and productivity change over time using Malmquist index.The results show that on average, productivity of municipal hospitals in Angola increased by 4.5% over the period 2000-2002; that growth was due to improvements in efficiency rather than innovation. © 2008 Springer Science+Business Media, LLC.

Whole life performance assessment: critical success factors

Whole life costing (WLC) has become the best practice in construction procurement and it is likely to be a major issue in predicting whole life costs of a construction project accurately. However, different expectations from different organizations throughout a project's life and the lack of data, monitoring targets, and long-term interest for many key players are obstacles to be overcome if WLC is to be implemented. A questionnaire survey was undertaken to investigate a set of ten common factors and 188 individual factors. These were grouped into eight critical categories (project scope, time, cost, quality, contract/administration, human resource, risk, and health and safety) by project phase, as perceived by the clients, contractors and subcontractors in order to identify critical success factors for whole life performance assessment (WLPA). Using a relative importance index, the top ten critical factors for each category, from the perspective of project participants, were analyzed and ranked. Their agreement on those categories and factors were analyzed using Spearman's rank correlation. All participants identify “Type of Project” as the most common critical factor in the eight categories for WLPA. Using the relative index ranking technique and weighted average methods, it was found that the most critical individual factors in each category were: “clarity of contract” (scope); “fixed construction period” (time); “precise project budget estimate” (cost); “material quality” (quality); “mutual/trusting relationships” (contract/administration); “leadership/team management” (human resource); and “management of work safety on site” (health and safety). There was relatively a high agreement on these categories among all participants. Obviously, with 80 critical factors of WLPA, there is a stronger positive relationship between client and contactor rather than contractor and subcontractor, client and subcontractor. Putting these critical factors into a criteria matrix can facilitate an initial framework of WLPA in order to aid decision making in the public sector in South Korea for evaluation/selection process of a construction project at the bid stage.

How green is green? A framework for environmental performance assessment in operations

This paper presents a framework based upon a relationship between environmental benefits and the investments and costs needed to implement and run company operations. As the results of environmental management become more evident it is proposed that the benefits rather than the environmental impacts are measured in the analysis of environmental performance. Four categories, or stages, are defined in this paper: “creative-green”, “expensive-green”, “inefficient-green or beginner”, and finally, the “complacent” stage. The paper describes the characteristics of each category and provides examples of indicators that could be used to measure environmental benefits. Qualitative and quantitative methods are necessary to classify companies according to the framework. It is believed that this paper can assist companies and public organisations to assess operations and projects considering their level of sustainability. The proposed framework can impact FDI and environmental policies in the public arena, and foster innovation on environmental practices within the private sector.

Marketing performance assessment systems and the business context

Purpose ‐ This study provides empirical evidence for the contextuality of marketing performance assessment (MPA) systems. It aims to introduce a taxonomical classification of MPA profiles based on the relative emphasis placed on different dimensions of marketing performance in different companies and business contexts. Design/methodology/approach ‐ The data used in this study (n=1,157) were collected using a web-based questionnaire, targeted to top managers in Finnish companies. Two multivariate data analysis techniques were used to address the research questions. First, dimensions of marketing performance underlying the current MPA systems were identified through factor analysis. Second, a taxonomy of different profiles of marketing performance measurement was created by clustering respondents based on the relative emphasis placed on the dimensions and characterizing them vis-á-vis contextual factors. Findings ‐ The study identifies nine broad dimensions of marketing performance that underlie the MPA systems in use and five MPA profiles typical of companies of varying sizes in varying industries, market life cycle stages, and competitive positions associated with varying levels of market orientation and business performance. The findings support the previously conceptual notion of contextuality in MPA and provide empirical evidence for the factors that affect MPA systems in practice. Originality/value ‐ The paper presents the first field study of current MPA systems focusing on combinations of metrics in use. The findings of the study provide empirical support for the contextuality of MPA and form a classification of existing contextual systems suitable for benchmarking purposes. Limited evidence for performance differences between MPA profiles is also provided.

Linking comprehensive performance assessment to the balanced scorecard:evidence from Hertfordshire County Council

Over the course of the last twenty years there has been a growing academic interest in performance management, particularly in respect of the evolution of new techniques and their resulting impact. One important theoretical development has been the emergence of multidimensional performance measurement models that are potentially applicable within the public sector. Empirically, academic researchers are increasingly supporting the use of such models as a way of improving public sector management and the effectiveness of service provision (Mayston, 1985; Pollitt, 1986; Bates and Brignall, 1993; and Massey, 1999). This paper seeks to add to the literature by using both theoretical and empirical evidence to argue that CPA, the external inspection tool used by the Audit Commission to evaluate local authority performance management, is a version of the Balanced Scorecard which, when adapted for internal use, may have beneficial effects. After demonstrating the parallels between the CPA framework and Kaplan and Norton's public sector Balanced Scorecard (BSC), we use a case study of the BSC based performance management system in Hertfordshire County Council to demonstrate the empirical linkages between a local scorecard and CPA. We conclude that CPA is based upon the BSC and has the potential to serve as a springboard for the evolution of local authority performance management systems.

An online assessment and development tool for business incubators:optimising business-incubation management practice, performance and impact, Project Report

This project is focused on exchanging knowledge between ABS, UKBI and managers of business incubators in the UK. The project relates to exploitation of extant knowledge-base on assessing and improving business incubation management practice and performance and builds on two earlier studies. It addresses a pressing need for assessing and benchmarking business incubation input, process and outcome performance and highlighting best practice. The overarching aim of this project was to obtain proof-of-concept for a business incubation performance assessment and benchmarking online tool, fine-tune it and put it in use by nurturing a community of business incubation management practice, aligned by the resultant tool. The purpose was to offer an appropriate set of measures, in areas identified by relevant research on business incubation performance management and impact as critical, against which: 1.The input and process performance of business incubation management practice can be assessed and benchmarked within the auspices of a community of incubator managers concerned with best practice 2.The outcome performance and impact of business incubators can be assessed longitudinally. As such, the developed online assessment framework is geared towards the needs of researchers, policy makers and practitioners concerned with business incubation performance, added value and impact.

A framework for assessing business-incubation input, process and output performance:proceedings of the RENT XXVII Conference, 20-22 November 2013, Vilnius, Lithuania

With business incubators deemed as a potent infrastructural element for entrepreneurship development, business incubation management practice and performance have received widespread attention. However, despite this surge of interest, scholars have questioned the extent to which business incubation delivers added value. Thus, there is a growing awareness among researchers, practitioners and policy makers of the need for more rigorous evaluation of the business incubation output performance. Aligned to this is an increasing demand for benchmarking business incubation input/process performance and highlighting best practice. This paper offers a business incubation assessment framework, which considers input/process and output performance domains with relevant indicators. This tool adds value on different levels. It has been developed in collaboration with practitioners and industry experts and therefore it would be relevant and useful to business incubation managers. Once a large enough database of completed questionnaires has been populated on an online platform managed by a coordinating mechanism, such as a business incubation membership association, business incubator managers can reflect on their practices by using this assessment framework to learn their relative position vis-à-vis their peers against each domain. This will enable them to align with best practice in this field. Beyond implications for business incubation management practice, this performance assessment framework would also be useful to researchers and policy makers concerned with business incubation management practice and impact. Future large-scale research could test for construct validity and reliability. Also, discriminant analysis could help link input and process indicators with output measures.

Hierarchical control and performance regimes in local government

Purpose – The purpose of this paper is to consider hierarchical control as a mode of governance, and analyses the extent of control exhibited by central government over local government through the best value (BV) and comprehensive performance assessment (CPA) performance regimes. Design/methodology/approach – This paper utilises Ouchi's framework and, specifically, his articulation of bureaucratic or hierarchical control in the move towards achievement of organisational objectives. Hierarchical control may be inferred from the extent of “command and control” by Central Government, use of rewards and sanctions, and alignment to government priorities and discrimination of performance. Findings – CPA represents a more sophisticated performance regime than BV in the governance of local authorities by central government. In comparison to BV, CPA involved less scope for dialogue with local government prior to introduction, closer inspection of and direction of support toward poorer performing authorities, and more alignment to government priorities in the weightings attached to service blocks. Originality/value - The paper focuses upon the hierarchic/bureaucratic mode of governance as articulated by Ouchi and expands on this mode in order to analyse shifts in performance regimes in the public sector.

Performance measurement with multiple interrelated variables and threshold target levels:evidence from retail firms in the US

In this study, we developed a DEA-based performance measurement methodology that is consistent with performance assessment frameworks such as the Balanced Scorecard. The methodology developed in this paper takes into account the direct or inverse relationships that may exist among the dimensions of performance to construct appropriate production frontiers. The production frontiers we obtained are deemed appropriate as they consist solely of firms with desirable levels for all dimensions of performance. These levels should be at least equal to the critical values set by decision makers. The properties and advantages of our methodology against competing methodologies are presented through an application to a real-world case study from retail firms operating in the US. A comparative analysis between the new methodology and existing methodologies explains the failure of the existing approaches to define appropriate production frontiers when directly or inversely related dimensions of performance are present and to express the interrelationships between the dimensions of performance.

New insights on measuring bank branches efficiency through DEA:transactional, operational, and profit assessments

This thesis presents a number of methodological developments that were raised by a real life application to measuring the efficiency of bank branches. The advent of internet banking and phone banking is changing the role of bank branches from a predominantly transaction-based one to a sales-oriented role. This fact requires the development of new forms of assessing and comparing branches of a bank. In addition, performance assessment models must also take into account the fact that bank branches are service and for-profit organisations to which providing adequate service quality as well as being profitable are crucial objectives. This study analyses bank branches performance in their new roles in three different areas: their effectiveness in fostering the use of new transaction channels such as the internet and the telephone (transactional efficiency); their effectiveness in increasing sales and their customer base (operational efficiency); and their effectiveness in generating profits without compromising the quality of service (profit efficiency). The chosen methodology for the overall analysis is Data Envelopment Analysis (DEA). The application attempted here required some adaptations to existing DEA models and indeed some new models so that some specialities of our data could be handled. These concern the development of models that can account for negative data, the development of models to measure profit efficiency, and the development of models that yield production units with targets that are nearer to their observed levels than targets yielded by traditional DEA models. The application of the developed models to a sample of Portuguese bank branches allowed their classification according to the three performance dimensions (transactional, operational and profit efficiency). It also provided useful insights to bank managers regarding how bank branches compare between themselves in terms of their performance, and how, in general, the three performance dimensions are connected between themselves.

A comparative assessment of performance and productivity of health centres in Seychelles

Purpose - The purpose of this paper is to measure the technical and scale efficiency of health centres; to evaluate changes in productivity; and to highlight possible policy implications of the results for policy makers. Design/methodology/approach - Data envelopment analysis (DEA) is employed to assess the technical and scale efficiency, and productivity change over a four-year period among 17 public health centres. Findings - During the period of study, the results suggest that the public health centres in Seychelles have exhibited mean overall or technical efficiency of above 93 per cent. It was also found that the overall productivity increased by 2.4 per cent over 2001-2004. Research limitations/implications - Further research can be undertaken to gather data on the prices of the various inputs to facilitate an estimation of the allocative efficiency of clinics. If such an exercise were to be undertaken, researchers may also consider collecting data on quantities and prices of paramedical, administrative and support staff to ensure that the analysis is more comprehensive than the study reported in this paper. Institutionalization of efficiency monitoring would help to enhance further the already good health sector stewardship and governance. Originality/value - This paper provides new empirical evidence on a four-year trend in the efficiency and productivity of health centres in Seychelles. © Emerald Group Publishing Limited.

An assessment of factors affecting performance and growth of new technology based firms in the UK

New Technology Based Firms (NTBF) are considered to be important for the economic development of a country in regards to both employment growth and innovative activity. The latter is believed to contribute significantly to the increase in productivity and therefore the competitiveness of UK’s economy. This study contributes to the above literature by investigating two of the factors believed to limit the growth of such firms in the UK. The first concerns the existence of a ‘knowledge gap’ while the second the existence of a ‘financial gap’. These themes are developed along three main research lines. Firstly, based upon the human capital theory initially proposed by Backer (1964) new evidence is provided on the human capital characteristics (experience and education) of the current UK NTBF entrepreneurs. Secondly, the causal relationship between general and specific human capital (as well as their interactions) upon the company performance and growth is investigated via its traditional direct effect as well as via its indirect effect upon the access to external finance. Finally, more light is shed on the financial structure and the type of financial constraints that high-tech firms face at start-up. In particular, whether a financial gap exists is explored by distinguishing between the demand and the supply of external finance as well as by type of external source of financing. The empirical testing of the various research hypotheses has been obtained by carrying out an original survey of new technology based firms defined as independent companies, established in the past 25 years in R&D intensive sectors. The resulting dataset contains information for 412 companies on a number of general company characteristics and the characteristics of their entrepreneurs in 2004. Policy and practical implications for future and current entrepreneurs and also providers of external finance are provided.

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes

The total thermoplastics pipe market in west Europe is estimated at 900,000 metric tonnes for 1977 and is projected to grow to some 1.3 million tonnes of predominantly PVC and polyolefins pipe by 1985. By that time, polyethylene for gas distribution pipe and fittings will represent some 30% of the total polyethylene pipe market. The performance characteristics of a high density polyethylene are significantly influenced by both molecular weight and type of comonomer; the major influences being in the long-term hoop stress resistance and the environmental stress cracking resistance. Minor amounts of hexene-1 are more effective than comonomers lower in the homologous series, although there is some sacrifice of density related properties. A synergistic improvement is obtained by combining molecular weight increase with copolymerisation. The Long-term design strength of polyethylene copolymers can be determined from hoop stress measurement at elevated temperatures and by means of a separation factor of approximate value 22, extrapolation can be made to room temperature performance for a water environment. A polyethylene of black composition has a sufficiently improved performance over yellow pigmented pipe to cast doubts on the validity of internationally specifying yellow coded pipe for gas distribution service. The chemical environment (condensate formation) that can exist in natural gas distribution networks has a deleterious effect on the pipe performance the reduction amounting to at least two decades in log time. Desorption of such condensate is very slow and the influence of the more aggressive aromatic components is to lead to premature stress cracking. For natural gas distribution purposes, the design stress rating should be 39 Kg/cm2 for polyethylenes in the molecular weight range of 150 - 200,000 and 55 Kg/cm2 for higher molecular weight materials.

Fuzzy assessment of performance of a decision making units using DEA:a non-radical approach

Data Envelopment Analysis (DEA) is recognized as a modern approach to the assessment of performance of a set of homogeneous Decision Making Units (DMUs) that use similar sources to produce similar outputs. While DEA commonly is used with precise data, recently several approaches are introduced for evaluating DMUs with uncertain data. In the existing approaches many information on uncertainties are lost. For example in the defuzzification, the a-level and fuzzy ranking approaches are not considered. In the tolerance approach the inequality or equality signs are fuzzified but the fuzzy coefficients (inputs and outputs) are not treated directly. The purpose of this paper is to develop a new model to evaluate DMUs under uncertainty using Fuzzy DEA and to include a-level to the model under fuzzy environment. An example is given to illustrate this method in details.