Multiple paradigms and organisational research: an analysis of work behaviour in the fire service

The thesis examines Kuhn's (1962, 1970) concept of paradigm, assesses how it is employed for mapping intellectual terrain in the social sciences, and evaluates it's use in research based on multiple theory positions. In so doing it rejects both the theses of total paradigm 'incommensurability' (Kuhn, 1962), and also of liberal 'translation' (Popper, 1970), in favour of a middle ground through the 'language-game of everyday life' (Wittgenstein, 1953). The thesis ultimately argues for the possibility of being 'trained-into' new paradigms, given the premise that 'unorganised experience cannot order perception' (Phillips, 1977). In conducting multiple paradigm research the analysis uses the Burrell and Morgan (1979) model for examining the work organisation of a large provincial fire Service. This analysis accounts for firstly, a 'functionalist' assessment of work design, demonstrating inter alia the decrease in reported motivation with length of service; secondly, an 'interpretive' portrayal of the daily accomplishment of task routines, highlighting the discretionary and negotiated nature of the day's events; thirdly, a 'radical humanist' analysis of workplace ideology, demonstrating the hegemonic role of officer training practices; and finally, a 'radical structuralist' description of the labour process, focusing on the establishment of a 'normal working day'. Although the argument is made for the possibility of conducting multiple paradigm research, the conclusion stresses the many institutional pressures serving to offset development.

Trade union policy and new technology: the Civil and Public Services Association

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.

The effectiveness of an organisations' equal opportunities policy for the role and training of women, particularly in the fire service

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Living with uncertainty in the age of runtime models

Uncertainty can be defined as the difference between information that is represented in an executing system and the information that is both measurable and available about the system at a certain point in its life-time. A software system can be exposed to multiple sources of uncertainty produced by, for example, ambiguous requirements and unpredictable execution environments. A runtime model is a dynamic knowledge base that abstracts useful information about the system, its operational context and the extent to which the system meets its stakeholders' needs. A software system can successfully operate in multiple dynamic contexts by using runtime models that augment information available at design-time with information monitored at runtime. This chapter explores the role of runtime models as a means to cope with uncertainty. To this end, we introduce a well-suited terminology about models, runtime models and uncertainty and present a state-of-the-art summary on model-based techniques for addressing uncertainty both at development- and runtime. Using a case study about robot systems we discuss how current techniques and the MAPE-K loop can be used together to tackle uncertainty. Furthermore, we propose possible extensions of the MAPE-K loop architecture with runtime models to further handle uncertainty at runtime. The chapter concludes by identifying key challenges, and enabling technologies for using runtime models to address uncertainty, and also identifies closely related research communities that can foster ideas for resolving the challenges raised. © 2014 Springer International Publishing.

Stock price and volume effects associated with changes in the composition of the FTSE Bursa Malaysian KLCI

We examine the stock price and volume effects associated with changes in the composition of the FTSE Bursa Malaysia Kuala Lumpur Composite Index (KLCI), over the time period of 2005–2012. We find evidence to support the price pressure hypothesis for both additions to and deletions from the KLCI. This is because significant stock price and trading volume effects in the pre index revision period are entirely reversed after the announcement of the news. Our empirical findings can be explained by the market microstructure literature. Significant changes in liquidity cause trading volume and stock prices to reverse back to their original level before the index revisions took place.

Satisfaction with primary care:the perspectives of people with schizophrenia

Background. Schizophrenia affects up to 1% of the population in the UK. People with schizophrenia use the National Health Service frequently and over a long period of time. However, their views on satisfaction with primary care are rarely sought. Objectives. This study aimed to explore the elements of satisfaction with primary care for people with schizophrenia. Method. A primary care-based study was carried out using semi-structured interviews with 45 patients with schizophrenia receiving shared care with the Northern Birmingham Mental Health Trust between 1999 and 2000. Results. Five major themes that affect satisfaction emerged from the data: the exceptional potential of the consultation itself; the importance of aspects of the organization of primary care; the construction of the user in the doctor-patient relationship; the influence of stereotypes on GP behaviour; and the importance of hope for recovery. Conclusion. Satisfaction with primary care is multiply mediated. It is also rarely expected or achieved by this group of patients. There is a significant gap between the rhetoric and the reality of user involvement in primary care consultations. Acknowledging the tensions between societal and GP views of schizophrenia as an incurable life sentence and the importance to patients of hope for recovery is likely to lead to greater satisfaction with primary health care for people with schizophrenia.

Beta-amyloid (Abeta) deposits and blood vessels: laminar distribution in the frontal cortex of patients with Alzheimer’s disease

The laminar distribution of diffuse, primitive and classic beta-amyloid (Abeta) deposits and blood vessels was studied in the frontal cortex of patients with Alzheimer’s disease (AD). In most patients, the density of the diffuse and primitive Abeta deposits was greatest in the upper cortical layers and the classic deposits in the deeper cortical layers. The distribution of the larger blood vessels (>10 micron in diameter) was often bimodal with peaks in the upper and deeper cortical layers. The incidence of capillaries (<10 micron) was significantly higher in the deeper cortical layers in most patients. Multiple regression analysis selected vertical distance below the pia mater as the most significant factor correlated with the Abeta deposit density. With the exception of the classic deposits in two patients, there was no evidence that these vertical distributions were related to laminar variations in the incidence of large or small blood vessels.

Alzheimer's Disease Part 3: the Alzheimer patient in the practice

As a result of the increasing proportion of elderly people in the UK population, it is likely that the optometrist will see patients with dementia in the practice. These patients pose particular problems for the optometrist who has to carry out refraction or an eye examination. Since each case of dementia is unique, it is impossible to give guidelines which will ensure the cooperation of all patients. However, a knowledge of the changes in personality shown by patients and the special problems that can arise is helpful in attempting to test the demented patient.

Marketing strategy and new product development in the UK credit card industry

The development of new products in today's marketing environment is generally accepted as a requirement for the continual growth and prosperity of organisations. The literature is consequently rich with information on the development of various aspects of good products. In the case of service industries, it can be argued that new service product development is of as least equal importance as it is to organisations that produce tangible goods products. Unlike the new goods product literature, the literature on service marketing practices, and in particular, new service product development, is relatively sparse. The main purpose of this thesis is to examine a number of aspects of new service product development practice with respect to financial services and specifically, credit card financial services. The empirical investigation utilises both a case study and a survey approach, to examine aspects of new service product development industry practice relating specifically to gaps and deficiencies in the literature with respect to the financial service industry. The findings of the empirical work are subsequently examined in the context in which they provide guidance and support for a new normative new service product development model. The study examines the UK credit card financial service product sector as an industry case study and perspective. The findings of the field work reveal that the new service product development process is still evolving, and that in the case of credit card financial services can be seen as a well-structured and well-documented process. New product development can also be seen as an incremental, complex, interactive and continuous process which has been applied in a variety of ways. A number of inferences are subsequently presented.

Designing mobile technologies for individuals with disabilities

While mobile devices offer many innovative possibilities to help increase the standard of living for individuals with disabilities and other special needs, the process of developing assistive technology, such that it will be effective across a group of individuals with a particular disability, can be extremely challenging. This chapter discusses key issues and trends related to designing and evaluating mobile assistive technology for individuals with disabilities. Following an overview of general design process issues, we argue (based on current research trends) that individuals with disabilities and domain experts be involved throughout the development process. While this, in itself, presents its own set of challenges, many strategies have successfully been used to overcome the difficulties and maximize the contributions of users and experts alike. Guidelines based on these strategies are discussed and are illustrated with real examples from one of our active research projects.

Investigating local delivery by road to retail and non-retail customers in the UK logistics sector

Over recent years, hub-and-spoke distribution techniques have attracted widespread research attention. Despite there being a growing body of literature in this area there is less focus on the spoke-terminal element of the hub-and-spoke system as being a key component in the overall service received by the end-user. Current literature is highly geared towards discussing bulk optimization of freight units rather than to the more discrete and individualistic profile characteristics of shared-user Less-than-truckload (LTL) freight. In this paper, a literature review is presented to review the role hub-and-spoke systems play in meeting multi-profile customer demands, particularly in developing sectors with more sophisticated needs, such as retail. The paper also looks at the use of simulation technology as a suitable tool for analyzing spoke-terminal operations within developing hub-and spoke systems.

Designing mobile technologies for individuals with disabilities

While mobile devices offer many innovative possibilities to help increase the standard of living for individuals with disabilities and other special needs, the process of developing assistive technology, such that it will be effective across a group of individuals with a particular disability, can be extremely challenging. This chapter discusses key issues and trends related to designing and evaluating mobile assistive technology for individuals with disabilities. Following an overview of general design process issues, we argue (based on current research trends) that individuals with disabilities and domain experts be involved throughout the development process. While this, in itself, presents its own set of challenges, many strategies have successfully been used to overcome the difficulties and maximize the contributions of users and experts alike. Guidelines based on these strategies are discussed and are illustrated with real examples from one of our active research projects.

A sphere of resonance for networked learning in the ‘non-places’ of our universities

The logic of ‘time’ in modern capitalist society appears to be a fixed concept. Time dictates human activity with a regularity, which as long ago as 1944, George Woodcock referred to as The Tyranny of the Clock. Seventy years on, Hartmut Rosa suggests humans no longer maintain speed to achieve something new, but simply to preserve the status quo, in a ‘social acceleration’ that is lethal to democracy. Political engagement takes time we no longer have, as we rush between our virtual spaces and ‘non-places’ of higher education. I suggest it’s time to confront the conspirators that, in partnership with the clock, accelerate our social engagements with technology in the context of learning. Through Critical Discourse Analysis (CDA) I reveal an alarming situation if we don’t. With reference to Bauman’s Liquid Modernity, I observe a ‘lightness’ in policy texts where humans have been ‘liquified’ Separating people from their own labour with technology in policy maintains the flow of speed a neoliberal economy demands. I suggest a new ‘solidity’ of human presence is required as we write about networked learning. ‘Writing ourselves back in’ requires a commitment to ‘be there’ in policy and provide arguments that decelerate the tyranny of time. I am though ever-mindful that social acceleration is also of our own making, and there is every possibility that we actually enjoy it.