Interviewing adult witnesses and victims

In this chapter, we discuss the interviewing of adult witnesses and victims with reference to how the extant psychological and linguistic literature has contributed to understanding and informing interview practice over the past 20 years and how it continues to support practical and procedural improvements. We have only scratched the surface of this important and complex topic, but throughout this chapter we have directed readers to many in-depth reviews and some of the most contemporary research literature currently available in this domain. We have introduced the PEACE model and described the Cognitive Interview procedure and its development. We have also discussed rapport building, question types and communication style, all with reference to witness memory and practical interviewing. Finally, we highlight areas that would benefit from research, for example conducting interviews with interpreters, and how new training initiatives are seeking to improve interview procedures and interviewer practice.

Computer integrated manufacturing control

Many manufacturing companies have long endured the problems associated with the presence of `islands of automation'. Due to rapid computerisation, `islands' such as Computer-Aided Design (CAD), Computer-Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS) and Material Requirement Planning (MRP), have emerged, and with a lack of co-ordination, often lead to inefficient performance of the overall system. The main objective of Computer-Integrated Manufacturing (CIM) technology is to form a cohesive network between these islands. Unfortunately, a commonly used approach - the centralised system approach, has imposed major technical constraints and design complication on development strategies. As a consequence, small companies have experienced difficulties in participating in CIM technology. The research described in this thesis has aimed to examine alternative approaches to CIM system design. Through research and experimentation, the cellular system approach, which has existed in the form of manufacturing layouts, has been found to simplify the complexity of an integrated manufacturing system, leading to better control and far higher system flexibility. Based on the cellular principle, some central management functions have also been distributed to smaller cells within the system. This concept is known, specifically, as distributed planning and control. Through the development of an embryo cellular CIM system, the influence of both the cellular principle and the distribution methodology have been evaluated. Based on the evidence obtained, it has been concluded that distributed planning and control methodology can greatly enhance cellular features within an integrated system. Both the cellular system approach and the distributed control concept will therefore make significant contributions to the design of future CIM systems, particularly systems designed with respect to small company requirements.

Business privilege and the strategic planning agenda of the Greater London Authority

The establishment of the Greater London Authority (GLA) in 2000 brought a new form of politics to London and new powers to formulate strategic policy. Through an investigation of the access of business interests in the formulation of London's strategic agenda, this article illuminates one aspect of the pressures on city government. It uses the urban regime approach as a framework for analysing the co-operation between the Mayor and business interests in shaping strategic priorities. Although there was a surrounding rhetoric that pointed towards a greater consensus-seeking approach, the business sector was very active in maintaining its privileged access. Strategic priorities were established in the GLA's first year and were then subsequently embodied in the London Plan. Our analysis is based on a detailed examination of this agenda-setting period using material from meetings, written reports and interviews with key actors. © 2005 The Editors of Urban Studies.

State-of-the-art in product-service systems

A Product-Service System (PSS) is an integrated combination of products and services. This Western concept embraces a service-led competitive strategy, environmental sustainability, and the basis to differentiate from competitors who simply offer lower priced products. This paper aims to report the state-of-the-art of PSS research by presenting a clinical review of literature currently available on this topic. The literature is classified and the major outcomes of each study are addressed and analysed. On this basis, this paper defines the PSS concept, reports on its origin and features, gives examples of applications along with potential benefits and barriers to adoption, summarizes available tools and methodologies, and identifies future research challenges.

Where are UK manufacturers along the journey to Lean?

Lean manufacturing is now widely accepted amongst UK based manufacturers as a valuable aid to achieving competitiveness. The associated principles, tools and techniques have been well documented since the 1980s and there are many competent practitioners, consultants and academics promoting Lean manufacturing. Therefore, it is useful to ask how well UK manufacturers are progressing along the Lean journey? This paper therefore provides an insight into this question by presenting the results, based on indepth case studies of five representative companies, that reflect progress being made within the UK manufacturing sector.

Energy saving and solar electricity in fan-ventilated greenhouses

Greenhouse cultivation is an energy intensive process therefore it is worthwhile to introduce energy saving measures and alternative energy sources. Here we show that there is scope for energy saving in fan ventilated greenhouses. Measurements of electricity usage as a function of fan speed have been performed for two models of 1.25 m diameter greenhouse fans and compared to theoretical values. Reducing the speed can cut the energy usage per volume of air moved by more than 70%. To minimize the capital cost of low-speed operation, a cooled greenhouse has been built in which the fan speed responds to sunlight such that full speed is reached only around noon. The energy saving is about 40% compared to constant speed operation. Direct operation of fans from solar-photovoltaic modules is also viable as shown from experiments with a fan driven by a brushless DC motor. On comparing the Net Present Value costs of the different systems over a 10 year amortization period (with and without a carbon tax to represent environmental costs) we find that sunlight-controlled system saves money under all assumptions about taxation and discount rates. The solar-powered system, however, is only profitable for very low discount rates, due to the high initial capital costs. Nonetheless this system could be of interest for its reliability in developing countries where mains electricity is intermittent. We recommend that greenhouse fan manufacturers improve the availability of energy-saving designs such as those described here.

A goal-based modeling approach to develop requirements of an adaptive system with environmental uncertainty

Dynamically adaptive systems (DASs) are intended to monitor the execution environment and then dynamically adapt their behavior in response to changing environmental conditions. The uncertainty of the execution environment is a major motivation for dynamic adaptation; it is impossible to know at development time all of the possible combinations of environmental conditions that will be encountered. To date, the work performed in requirements engineering for a DAS includes requirements monitoring and reasoning about the correctness of adaptations, where the DAS requirements are assumed to exist. This paper introduces a goal-based modeling approach to develop the requirements for a DAS, while explicitly factoring uncertainty into the process and resulting requirements. We introduce a variation of threat modeling to identify sources of uncertainty and demonstrate how the RELAX specification language can be used to specify more flexible requirements within a goal model to handle the uncertainty. © 2009 Springer Berlin Heidelberg.

Facile synthesis of poly(3-hexylthiophene)-block-poly(ethylene oxide) copolymers via Steglich esterification

Poly(ethylene oxide) has been coupled to poly(3-hexylthiophene) using esterification to produce pure diblock copolymers, highly relevant for use in organic electronic devices. The new synthetic route described herein uses a metal-free coupling step, for the first time, to afford well-defined polymers in high yields following facile purification.

UK business schools : historical contexts and future scenarios:summary report from an EBK/AIM Management Research Forum

This report begins with an analysis of the historical development of management education in Britain since 1945. It provides a context for understanding conflicting themes in current debates about business schools and examines how the different types of business school have evolved in the UK within very different education institutions. It places the current challenges faced by business schools in context, offers guidance on the strategic options available, and discusses some of the practical implications of the different paths outlined.

Quantitative interpretation of diffusion-ordered NMR spectra:can we rationalize small molecule diffusion coefficients?

Appealingly simple: A new method is described that allows the diffusion coefficient of a small molecule to be estimated given only the molecular weight and the viscosity of the solvent used. This method makes possible the quantitative interpretation of the diffusion domain of diffusion-ordered NMR spectra (see picture). © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The SEC’s retail investor 2.0: Interactive data and the rise of calculative accountability

The Securities and Exchange Commission (SEC) in the United States mandated a new digital reporting system for US companies in late 2008. The new generation of information provision has been dubbed by Chairman Cox, ‘interactive data’ (SEC, 2006a). Despite the promise of its name, we find that in the development of the project retail investors are invoked as calculative actors rather than engaged in dialogue. Similarly, the potential for the underlying technology to be applied in ways to encourage new forms of accountability appears to be forfeited in the interests of enrolling company filers. We theorise the activities of the SEC and in particular its chairman at the time, Christopher Cox, over a three year period, both prior to and following the ‘credit crisis’. We argue that individuals and institutions play a central role in advancing the socio-technical project that is constituted by interactive data. We adopt insights from ANT (Callon, 1986; Latour, 1987, 2005b) and governmentality (Miller, 2008; Miller and Rose, 2008) to show how regulators and the proponents of the technology have acted as spokespersons for the interactive data technology and the retail investor. We examine the way in which calculative accountability has been privileged in the SEC’s construction of the retail investor as concerned with atomised, quantitative data (Kamuf, 2007; Roberts, 2009; Tsoukas, 1997). We find that the possibilities for the democratising effects of digital information on the Internet has not been realised in the interactive data project and that it contains risks for the very investors the SEC claims to seek to protect.

Is psychological androgyny necessary for the hospitality graduate to become a manager?

The study examines the personality attributes hospitality employers deem necessary for new graduates’ success. Psychological androgyny—that has rarely been applied in a hospitality management context—underpins the study. Findings were that the smaller companies by employees expected androgynous characteristics from the graduate, while the medium and larger companies by employees expected higher levels of expressive—typically feminine—behaviours. These findings are not congruent with the existing literature, which has so often highlighted a “masculine supremacy effect.” The study concluded that psychological androgyny is a useful framework for the exploration of what hospitality employers expect from their graduate recruits.