A combined approach for hiding partial information in RSA

Partial information leakage in deterministic public-key cryptosystems refers to a problem that arises when information about either the plaintext or the key is leaked in subtle ways. Quite a common case is where there are a small number of possible messages that may be sent. An attacker may be able to crack the scheme simply by enumerating all the possible ciphertexts. Two methods are proposed for facing the partial information leakage problem in RSA that incorporate a random element into the encrypted message to increase the number of possible ciphertexts. The resulting scheme is, effectively, an RSA-like cryptosystem which exhibits probabilistic encryption. The first method involves encrypting several similar messages with RSA and then using the Quadratic Residuosity Problem (QRP) to mark the intended one. In this way, an adversary who has correctly guessed two or more of the ciphertexts is still in doubt about which message is the intended one. The cryptographic strength of the combined system is equal to the computational difficulty of factorising a large integer; ideally, this should be feasible. The second scheme uses error-correcting codes for accommodating the random component. The plaintext is processed with an error-correcting code and deliberately corrupted before encryption. The introduced corruption lies within the error-correcting ability of the code, so as to enable the recovery of the original message. The random corruption offers a vast number of possible ciphertexts corresponding to a given plaintext; hence an attacker cannot deduce any useful information from it. The proposed systems are compared to other cryptosystems sharing similar characteristics, in terms of execution time and ciphertext size, so as to determine their practical utility. Finally, parameters which determine the characteristics of the proposed schemes are also examined.

In vivo and in vitro aspects of imidazoline-2(1/2)sites within the central nervous system

The in vivo and in vitro characteristics of the I2 binding site were probed using the technique of drug discrimination and receptor autoradiography. Data presented in this thesis indicates the I2 ligand 2-BFI generates a cue in drug discrimination. Further studies indicated agmatine, a proposed endogenous imidazoline ligand, and a number of imidazoline and imidazole analogues of 2-BFI substitute significantly for 2-BFI. In addition to specific I2 ligands the administration of NRl's (noradrenaline reuptake inhibitors), the sympathomimetic d-amphetamine, the α1-adrenoceptor agonist methoxamine, but not the β1 agonist dobutamine or the β2 agonist salbutamol, gave rise to significant levels of substitution for the 2-BFI cue. The administration of the α1-adrenoceptor antagonist WB4101, prior to 2- BFI itself significantly reduced levels of 2-BFI appropriate responding. Administration of the reversible MAO-A inhibitors moclobemide and Ro41-1049, but not the reversible MAO-B inhibitors lazabemide and Ro16-6491, gave rise to potent dose dependent levels of substitution for the 2-BFI cue. Further studies indicated the administration of a number of β-carbolines and the structurally related indole alkaloid ibogaine also gave rise to dose dependent significant levels of substitution. Due to the relationship of indole alkaloids to serotonin the 5-HT releaser fenfluramine and a number of SSRI's (selective serotonin reuptake inhibitor) were also administered and these compounds gave rise to significant partial (20-80% responses to the 2-BFI lever) levels of substitution. The autoradiographical studies reported here indicate [3H]2-BFI labels I2 sites within the rat arcuate nucleus, area postrema, pineal gland, interpeduncular nucleus and subfornical organ. Subsequent experiments confirmed that the drug discrimination dosing schedule significantly increases levels of [3H]2-BFI 12 binding within two of these nuclei. However, levels of [3H]2-BFI specific binding were significantly reduced within four of these nuclei after chronic treatment with the irreversible MAO inhibitors deprenyl and tranylcypromine but not pargyline, which only reduced levels significantly in two. Further autoradiographical studies indicated that the distribution of [3H]2-BFI within the C57/B mouse compares favourably to that within the rat. Comparison of these levels of binding to those from transgenic mice who over-express MAO-B indicates two possibly distinct populations of [3H]2-BFI 12 sites exist in mouse brain. The data presented here indicates the 2-BFI cue is associated with the selective activation of α1-adrenoceptors and possibly 5-HT receptors. 2-BFI trained rats recognise reversible MAO-A but not MAO-B inhibitors. However, data within this thesis indicates the autoradiographical distribution of I2 sites bears a closer resemblance to that of MAO-B not MAO-A and further studies using transgenic mice that over-express MAO-B suggests a non-MAO-B I2 site exists in mouse brain.

The role of analogy in spelling in English primary school children - a partial intervention study

The English writing system is notoriously irregular in its orthography at the phonemic level. It was therefore proposed that focusing beginner-spellers’ attention on sound-letter relations at the sub-syllabic level might improve spelling performance. This hypothesis was tested in Experiments 1 and 2 using a ‘clue word’ paradigm to investigate the effect of analogy teaching intervention / non-intervention on the spelling performance of an experimental group and controls. The results overall showed the intervention to be effective in improving spelling, and this effect to be enduring. Experiment 3 demonstrated a greater application of analogy in spelling, when clue words, which participants used in analogy to spell test words, remained in view during testing. A series of regression analyses, with spelling entered as the criterion variable and age, analogy and phonological plausibility (PP) as predictors, showed both analogy and PP to be highly predictive of spelling. Experiment 4 showed that children could use analogy to improve their spelling, even without intervention, by comparing their performance in spelling words presented in analogous categories or in random lists. Consideration of children’s patterns of analogy use at different points of development showed three age groups to use similar patterns of analogy, but contrasting analogy patterns for spelling different words. This challenges stage theories of analogy use in literacy. Overall the most salient units used in analogy were the rime and, to a slightly lesser degree, the onset-vowel and vowel. Finally, Experiment 5 showed analogy and phonology to be fairly equally influential in spelling, but analogy to be more influential than phonology in reading. Five separate experiments therefore found analogy to be highly influential in spelling. Experiment 5 also considered the role of memory and attention in literacy attainment. The important implications of this research are that analogy, rather than purely phonics-based strategy, is instrumental in correct spelling in English.

Precipitation studies on alloys from the system copper chromium zirconium

The precipitation reactions occurring in a series of copper-based alloys selected from the system copper-chromium-zirconium have been studied by resistometric and metallographic techniques. A survey of the factors influencing the development of copper-based alloys for high strength, high conductivity applications is followed by a more general review of contemporary materials, and illustrates that the most promising alloys are those containing chromium and zirconium. The few systematic attempts to study alloys from this system have been collated, discussed, and used as a basis for the selection of four alloy compositions viz:- Cu - 0.4% Cr Cu - 0.24. Zr Cu - 0. 3% Cr - 0.1% Zr Cu - 0.2% Cr - 0.2% Zr A description of the experimental techniques used to study the precipitation behaviour of these materials is preceeded by a discussion of the currently accepted theories relating to precipitate nucleation and growth. The experimental results are presented and discussed for each of the alloys independently, and are then treated jointly to obtain an overall assessment of the way in which the precipitation kinetics, metallography and mechanical properties vary with alloy composition and heat treatment. The metastable solid solution of copper-chromium is found to decompose by the rejection of chromium particles which maintain a coherent interface and a Kurdjumov-Sachs type crystallographic orientation relationship with the copper matrix. The addition of 0.1% zirconium to the alloy retards the rate of transformation by a factor of ten and modifies the dispersion characteristics of the precipitate without markedly altering the morphology. Further additions of zirconium lead to the growth of stacking faults during ageing, which provide favourable nucleation sites for the chromium precipitate. The partial dislocations bounding such stacking faults are also found to provide mobile heterogeneous nucleation sources for the precipitation reactions occurring in copper-zirconium.

Performance enhancement of partial-42.7 Gb/s DPSK via an asymmetrical receiver design

We present numerically and experimentally the combined impact of an asymmetric receiver design and a partial 42.7 Gb/s DPSK system. By implementing an optimized bit period delay at the MZI and Asymmetric filtering at the destructive port, system performance can be significantly improved by 1.8 dB for an OSNR of 20 dB. © 2013 IEEE.

A simple remote sensing based information system for monitoring sites of conservation importance

Monitoring is essential for conservation of sites, but capacity to undertake it in the field is often limited. Data collected by remote sensing has been identified as a partial solution to this problem, and is becoming a feasible option, since increasing quantities of satellite data in particular are becoming available to conservationists. When suitably classified, satellite imagery can be used to delineate land cover types such as forest, and to identify any changes over time. However, the conservation community lacks (a) a simple tool appropriate to the needs for monitoring change in all types of land cover (e.g. not just forest), and (b) an easily accessible information system which allows for simple land cover change analysis and data sharing to reduce duplication of effort. To meet these needs, we developed a web-based information system which allows users to assess land cover dynamics in and around protected areas (or other sites of conservation importance) from multi-temporal medium resolution satellite imagery. The system is based around an open access toolbox that pre-processes and classifies Landsat-type imagery, and then allows users to interactively verify the classification. These data are then open for others to utilize through the online information system. We first explain imagery processing and data accessibility features, and then demonstrate the toolbox and the value of user verification using a case study on Nakuru National Park, Kenya. Monitoring and detection of disturbances can support implementation of effective protection, assist the work of park managers and conservation scientists, and thus contribute to conservation planning, priority assessment and potentially to meeting monitoring needs for Aichi target 11.

Thermography-based virtual MPPT scheme for improving PV energy efficiency under partial shading conditions

This paper proposes a new thermography-based maximum power point tracking (MPPT) scheme to address photovoltaic (PV) partial shading faults. Solar power generation utilizes a large number of PV cells connected in series and in parallel in an array, and that are physically distributed across a large field. When a PV module is faulted or partial shading occurs, the PV system sees a nonuniform distribution of generated electrical power and thermal profile, and the generation of multiple maximum power points (MPPs). If left untreated, this reduces the overall power generation and severe faults may propagate, resulting in damage to the system. In this paper, a thermal camera is employed for fault detection and a new MPPT scheme is developed to alter the operating point to match an optimized MPP. Extensive data mining is conducted on the images from the thermal camera in order to locate global MPPs. Based on this, a virtual MPPT is set out to find the global MPP. This can reduce MPPT time and be used to calculate the MPP reference voltage. Finally, the proposed methodology is experimentally implemented and validated by tests on a 600-W PV array.