The ecology of paper mill by-product and its evaluation as a casing medium in the culture of Agaricus bisporus (Lange) Pilat

Effluent from pulp and paper production at the Kemsley mill of Bowaters U.K. Paper Company Limited passes through two treatment stages before its discharge into the Swale estuary. Suspended material removed during treatment is deposited on wasteground as a thin sludge. The solids it contains are mainly wood components lost during pulp production, whilst it also has a high salt content, derived from chemicals used in pulping processes. After deposition the sludge undergoes an ageing process during which it dries out and its salt content is reduced. This ageing can be reproduced and accelerated by improved drainage under controlled conditions. The paper mill sludge was investigated as a casing medium in the culture of Agaricus bisporus (Lange) Pilat, the cultivated mushroom. It was unsuitable up to one year from deposition due largely to the inhibitory effect of its salt content on fruiting. Material eighteen months or more in age gave yields comparable to standard peat casing. Before use as a casing the material must be shredded to a satisfactory structure, neutralised with chalk, and pasteurised to eliminate organisms harmful to the crop. The prepared medium has a high water holding capacity and a structure resilient to management procedures, important requirements of a good casing. A passive movement of salts from the compost to the casing was shown to occur during culture, capable of enhancing the natural decline in cropping if sufficiently great. The ions chloride, potassium, sodium and sulphate were shown to be responsible, their damaging effects being due to high conductivity created in the casing. Studies of elements available during culture suggested phosphate availability in the compost could limit crop potential, whilst iron released by mycelium of A.bisporus in the casing may be utilised by associated micro-organisms.

Production and operations managers and logistics managers: a cross-country comparison

Purpose – The purpose of this paper is to explore the contribution of production and operations managers (POMs) and logistics managers (LMs) in improving manufacturing and service operations, comparing experiences in Australia and Britain. Design/methodology/approach – The findings are based on surveys of the two occupations in the two countries. Thus, the focus is on comparing and contrasting two strategically placed occupations within the supply chain and in two traditional manufacturing economies in developed countries, in opposing hemispheres of the world. Findings – The working lives of 254 Australian and 195 British POMs and 303 Australian and 168 British LMs are explored to see how well prepared they are for the business challenges of today, whether they see the need for changes in the ways in which they work and what satisfactions they derive from their worlds of work? Practical implications – Insights are provided for senior management into the deployment and personal and professional development needs of two key occupations within supply chain management. Originality/value – The findings from the research give fresh insights into the ways in which managers in the two areas of responsibilities in the two countries.view their worlds of work.

Foreign manufacturing, regional agglomeration and technical efficiency in UK industries: a stochastic production frontier approach

The paper examines howfar foreign manufacturing investment in UK industries, together with the spatial agglomeration of those industries, affect technical efficiency. The paper links research on the estimation of technical efficiency,with those literatures demonstrating the economies associated with foreign direct investment and spatial agglomeration. The methodology involves estimation of a stochastic production frontier with random components associated with industry technical inefficiency, and a standard error. The paper also explores whether the degree of foreign involvement has a greater impact on technical efficiency where the domestic industry sector is characterized by comparatively high productivity and spatial agglomeration. The policy implications of the analysis are discussed.

Evidence and implications of multiple paradigms in accounting knowledge production

This paper uses evidence gathered in two perception studies ofAustralasian and British accounting academics to reflect on aspects of the knowledge production systemwithin accounting academe. We provide evidence of the representation of multiple paradigms in many journals that are scored by participants as being of high quality. Indeed most of the journals we surveyed are perceived by accounting academics as incorporating research from more than one paradigm. It is argued that this ‘catholic’ approach by journal editors and the willingness of many respondents in our surveys to score journals highly on material they publish from both paradigm categories reflects a balanced acceptance of the multi-paradigmatic state of accounting research. Our analysis is set within an understanding of systems of accounting knowledge production as socially constructed and as playing an important role in the distribution of power and reward in the academy. We explore the impact of our results on concerns emerging from the work of a number of authors who carefully expose localised 'elites'. The possibilities for a closer relationship between research emerging from a multi-paradigm discipline and policy setting and practice are also discussed. The analysis provides a sense of optimism that the broad constituency of accounting academics operates within an environment conducive for the exchange of ideas. That optimism is dampened by concerns about the impact of local 'elites' and the need for more research on their impact on accounting academe.

Inscribing the organization:representations in dispute between accounting and production

This paper assumes that a primary function of management accounting is the representation of "accounting facts" for purposes such as organizational control. Accountants are able to offer conventional techniques of control, such as standard costing, as a consequence of their ability to deploy accounting representations within managerial and economic models of organizational processes. Accounting competes, at times, with other 'professional' groups, such as production planning or quality management people, in this role of representing the organization to management. The paper develops its arguments around a case illustration of cost accounting set in a low technology manufacturing environment. The research relates to a case organization in which accountants are attempting to establish the reliability of accounting inscriptions of a simple manufacturing process. The case research focuses on the documents, the inscriptions that vie for managements' attention. It is these sometimes messy and inaccurate representations which enable control of complex and heterogeneous activities at a distance. At the end of our site visits we observe quality management systems in the ascendancy over the accountants' standard costing systems. © 2006 Elsevier Ltd. All rights reserved.

Insights into factors affecting production and operations management (POM) journal evaluation

The paper extends the current literature on peer review journal evaluations by providing a number of insights based on the diversity of Production and Operations Management (POM) research. We provide peer review evaluations for POM research outlets, based on a sampling frame that includes a large number of POM researchers worldwide. More specifically, the paper develops and tests various hypotheses as to whether the perceived quality and relevance of a journal is affected by such factors as: (i) nature of research work (empiricists versus modelers), (ii) society membership, (iii) research productivity, (iv) geographical location, and (v) seniority. Our findings suggest that caution must be exercised when utilizing existing POM journal rankings, as some factors, particularly the difference between empiricists and modelers, may influence journal evaluation. These must be considered when addressing issues such as faculty promotions, tenure, and salary. © 2006 Elsevier B.V. All rights reserved.

The DRAMA methodology for analysing strategy and its links with production system design

This paper describes a methodology: 'decision rules for analyzing manufacturing activities', which is designed to be a practical system of enquiry linking a strategic analysis to the design of production systems. The paper describes the development of the system, an industry specific design methodology, into DRAMA II which is a model that serves as an analytical tool for studying decision processes and implementation of production systems.

Objects and the production of technological forms of life:understanding organisational arrangements from a postsocial perspective

Objects are produced within, and simultaneously affect, the process of organizing as a consequence of their interaction within social collectives. This paper discusses the impact and influences of the growth of post-social relations, between human and technological objects, on social and organisational arrangements. The paper presents a discussion largely at the conceptual level and draws from a variety of literatures, including the burgeoning sociology of science literature. The discussion in this paper is based on a view that posits the growth of intimate links with epistemic objects within organisations and society. Organising through networks of post-social relations increasingly comes to affect the manner in which differing groups of organisational participants, and particularly various categories of knowledge workers, experience time and spatial arrangements within organisations.

The impact of arms production on the South African manufacturing industry

The 1977 UN arms embargo was one of the main factors which led South Africa to establish a largely self sufficient import-substituting arms industry capable of meeting the apartheid state's demand for sophisticated weaponry. While macroeconomic studies suggest that high military spending had a damaging effect on economic growth, no studies have investigated the disaggregated impact of military expenditure on industrial development. This paper applies panel data methods to the Industrial Development Corporation's Sectoral Database in order to analyse the level effects of military spending.

Production management in Sweden:eight short illustrative cases

The performance of the manufacturing sector has been a major factor contributing to Sweden's economic growth. This paper comprises eight short cases describing a range of Swedish organisations together with the principal features of their production function. The cases are intended to general discussion and provide a greater understanding of the technical and organisational factors which influence the efficiency of production systems.

Achieving cost competitiveness with an agent based integrated process planning and production scheduling system

From a manufacturing perspective, the efficiency of manufacturing operations (such as process planning and production scheduling) are the key element for enhancing manufacturing competence. Process planning and production scheduling functions have been traditionally treated as two separate activities, and have resulted in a range of inefficiencies. These include infeasible process plans, non-available/overloaded resources, high production costs, long production lead times, and so on. Above all, it is unlikely that the dynamic changes can be efficiently dealt with. Despite much research has been conducted to integrate process planning and production scheduling to generate optimised solutions to improve manufacturing efficiency, there is still a gap to achieve the competence required for the current global competitive market. In this research, the concept of multi-agent system (MAS) is adopted as a means to address the aforementioned gap. A MAS consists of a collection of intelligent autonomous agents able to solve complex problems. These agents possess their individual objectives and interact with each other to fulfil the global goal. This paper describes a novel use of an autonomous agent system to facilitate the integration of process planning and production scheduling functions to cope with unpredictable demands, in terms of uncertainties in product mix and demand pattern. The novelty lies with the currency-based iterative agent bidding mechanism to allow process planning and production scheduling options to be evaluated simultaneously, so as to search for an optimised, cost-effective solution. This agent based system aims to achieve manufacturing competence by means of enhancing the flexibility and agility of manufacturing enterprises.

Production of phenol-formaldehyde resin composites

The main objective of this work was to examlne the various stages of the production of industrial laminates based on phenol-formaldehyde resins, with a view of suggesting ways of improving the process economics and/or the physical properties of the final product. Aspects of impregnation, drying, and lamination were investigated. The resins used in all experiments were ammonia-catalysed. Work was concentrated on the lamination stage since this is a labour intensive activity. Paper-phenolic lay-ups were characterised in terms of the temperatures experienced during cure, and a shorter cure-cycle is proposed, utilising the exothermic heat produced during pressing of 25.5 mm thick lay-ups. Significant savings in production costs and improvements in some of the physical properties have been achieved. In particular, water absorption has been reduced by 43-61%. Work on the drying stage has shown that rapid heating of the wet impregnated substrate results in resin solids losses. Drying at lower temperatures by reducing the driving force leads to more resin (up to 6.5%) being retained by the prepregs and therefore more effective use of an expensive raw material. The impregnation work has indicated that residence times above 6 seconds in the varnish bath enhance the insulation resistance of the final product, possibly due to improved resin distribution and reduction in water absorption. In addition, a novel process which involves production of laminates by in situ polymerisation of the phenolic resin on the substrate has been examined. Such a process would eliminate the solvent recovery plant - a necessary stage in current industrial processes. In situ polymerisation has been shown to be chemically feasible.

Estimation of the production cost of fast pyrolysis bio-oil

A number of papers and reports covering the techno-economic analysis of bio-oil production has been published. These have had different scopes, use different feedstocks and reflected national cost structures. This paper reviews and compares their cost estimates and the experimental results that underpin them. A comprehensive cost and performance model was produced based on consensus data from the previous studies or stated scenarios where data is not available that reflected UK costs. The model takes account sales of bio-char that is a co-product of pyrolysis and the electricity consumption of the pyrolysis plant and biomass pre-processing plants. It was concluded that it should be able to produce bio-oil in the UK from energy crops for a similar cost as distillate fuel oil. It was also found that there was little difference in the processing cost for woodchips and baled miscanthus. © 2011 Elsevier Ltd.

Inside ‘Inside View’: reflections on stimulating debate and engagement through a multimedia live theatre production on the dilemmas and issues of pre-natal screening policy and practice

Background The role of applied theatre in engaging both lay and professional publics with debate on health policy and practice is an emergent field. This paper discusses the development, production performance and discussion of ‘Inside View’.1 Objectives The objectives were to produce applied theatre from research findings of a completed study on genetic prenatal screening, exploring the dilemmas for women and health professionals of prenatal genetic screening, and to engage audiences in debate and reflection on the dilemmas of prenatal genetic screening. Methods ‘Inside View’ was developed from a multidisciplinary research study through identification of emergent themes from qualitative interviews, and development of these by the writer, theatre producer and media technologist with input from the researchers. Findings Inside View was performed in London and the Midlands to varied audiences with a panel discussion and evaluation post performance. The audiences were engaged in debate that was relevant to them professionally and personally. Knowledge translation through applied theatre is an effective tool for engaging the public but the impact subsequently is unclear. There are ethical issues of unexpected disclosure during discussion post performance and the process of transforming research findings into applied theatre requires time and trust within the multidisciplinary team as well as adequate resourcing.

Examining green production and its role within the competitve strategy of manufacturers

Purpose: This paper reviews current literature and contributes a set of findings that capture the current state-of-the-art of the topic of green production. Design/methodology/approach: A literature review to capture, classify and summarize the main body of knowledge on green production and, translate this into a form that is readily accessible to researchers and practitioners in the more mainstream operations management community. Findings: The existing knowledge base is somewhat fragmented. This is a relatively unexplored topic within mainstream operations management research and one which could provide rich opportunities for further exploration. Originality/value: This paper sets out to review current literature, from a more conventional production operations perspective, and contributes a set of findings that capture the current state-of-the-art of this topic.