An investigation of thin amorphous carbon-based sputtered coatings for MEMS and micro-engineering applications

The work presented in this thesis describes an investigation into the production and properties of thin amorphous C films, with and without Cr doping, as a low wear / friction coating applicable to MEMS and other micro- and nano-engineering applications. Firstly, an assessment was made of the available testing techniques. Secondly, the optimised test methods were applied to a series of sputtered films of thickness 10 - 2000 nm in order to: (i) investigate the effect of thickness on the properties of coatingslcoating process (ii) investigate fundamental tribology at the nano-scale and (iii) provide a starting point for nanotribological coating optimisation at ultra low thickness. The use of XPS was investigated for the determination of Sp3/Sp2 carbon bonding. Under C 1s peak analysis, significant errors were identified and this was attributed to the absence of sufficient instrument resolution to guide the component peak structure (even with a high resolution instrument). A simple peak width analysis and correlation work with C KLL D value confirmed the errors. The use of XPS for Sp3/Sp2 was therefore limited to initial tentative estimations. Nanoindentation was shown to provide consistent hardness and reduced modulus results with depth (to < 7nm) when replicate data was suitably statistically processed. No significant pile-up or cracking of the films was identified under nanoindentation. Nanowear experimentation by multiple nanoscratching provided some useful information, however the conditions of test were very different to those expect for MEMS and micro- / nano-engineering systems. A novel 'sample oscillated nanoindentation' system was developed for testing nanowear under more relevant conditions. The films were produced in an industrial production coating line. In order to maximise the available information and to take account of uncontrolled process variation a statistical design of experiment procedure was used to investigate the effect of four key process control parameters. Cr doping was the most significant control parameter at all thicknesses tested and produced a softening effect and thus increased nanowear. Substrate bias voltage was also a significant parameter and produced hardening and a wear reducing effect at all thicknesses tested. The use of a Cr adhesion layer produced beneficial results at 150 nm thickness, but was ineffective at 50 nm. Argon flow to the coating chamber produced a complex effect. All effects reduced significantly with reducing film thickness. Classic fretting wear was produced at low amplitude under nanowear testing. Reciprocating sliding was produced at higher amplitude which generated three body abrasive wear and this was generally consistent with the Archard model. Specific wear rates were very low (typically 10-16 - 10-18 m3N-1m-1). Wear rates reduced exponentially with reduced film thickness and below (approx.) 20 nm, thickness was identified as the most important control of wear.

The dialectics of corporate reporting:a semiotic analysis of corporate financial and environmental reporting

The central argument to this thesis is that the nature and purpose of corporate reporting has changed over time to become a more outward looking and forward looking document designed to promote the company and its performance to a wide range of shareholders, rather than merely to report to its owners upon past performance. it is argued that the discourse of environmental accounting and reporting is one driver for this change but that this discourse has been set up as in conflicting with the discourse of traditional accounting and performance measurement. The effect of this opposition between the discourses is that the two have been interpreted to be different and incompatible dimensions of performance with good performance along one dimension only being achievable through a sacrifice of performance along the other dimension. Thus a perceived dialectic in performance is believed to exist. One of the principal purposes of this thesis is to explore this perceived dialectic and, through analysis, to show that it does not exist and that there is not incompatibility. This exploration and analysis is based upon an investigation of the inherent inconsistencies in such corporate reports and the analysis makes use of both a statistical analysis and a semiotic analysis of corporate reports and the reported performance of companies along these dimensions. Thus the development of a semiology of corporate reporting is one of the significant outcomes of this thesis. A further outcome is a consideration of the implications of the analysis for corporate performance and its measurement. The thesis concludes with a consideration of the way in which the advent of electronic reporting may affect the ability of organisations to maintain the dialectic and the implications for corporate reporting.

Microstructural and environmental effects on fatigue crack propagation in duplex stainless steels

Fatigue crack initiation and propagation in duplex stainless steels are strongly affected by microstructure in both inert and aggressive environments. Fatigue crack growth rates in wrought Zeron 100 duplex stainless steel in air were found to vary with orientation depending on the frequency of crack tip retardation at ferrite/austenite grain boundaries. Fatigue crack propagation rates in 3.5% NaCl solution and high purity water are increased by hydrogen assisted transgranular cyclic cleavage of the ferrite. The corrosion fatigue results are interpreted using a model for the cyclic cleavage mechanism.