Employee social responsibility:development of an ESR measure and a multi-level investigation of antecedent and boundary conditions

The following thesis instigates the discussion on corporate social responsibility (CSR) through a review of literature on the conceptualisation, determinants, and remunerations of organisational CSR engagement. The case is made for the need to draw attention to the micro-levels of CSR, and consequently focus on employee social responsibility at multiple levels of analysis. In order to further research efforts in this area, the prerequisite of an employee social responsibility behavioural measurement tool is acknowledged. Accordingly, the subsequent chapters outline the process of scale development and validation, resulting in a robust, reliable and valid employee social responsibility scale. This scale is then put to use in a field study, and the noteworthy roles of the antecedent and boundary conditions of transformational leadership, assigned CSR priority, and CSR climate are confirmed at the group and individual level. Directionality of these relationships is subsequently alluded to in a time-lagged investigation, set within a simulated business environment. The thesis collates and discusses the contributions of the findings from the research series, which highlight a consistent three-way interaction effect of transformational leadership, assigned CSR priority and CSR climate. Specifically, efforts are made to outline various avenues for future research, given the infancy of the micro-level study of employee social responsibility.

Fluid, heat and mass transfer in a Venlo type greenhouse with variable boundary conditions

DUE TO COPYRIGHT RESTRICTIONS, ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

The effects of servant leadership on follower performance and well-being:underlying mechanisms, boundary conditions, and the role of training

Based on a review of the servant leadership, well-being, and performance literatures, the first study develops a research model that examines how and under which conditions servant leadership is related to follower performance and well-being alike. Data was collected from 33 leaders and 86 of their followers working in six organizations. Multilevel moderated mediation analyses revealed that servant leadership was indeed related to eudaimonic well-being and lead-er-rated performance via followers’ positive psychological capital, but that the strength and di-rection of the examined relationships depended on organizational policies and practices promot-ing employee health, and in the case of follower performance on a developmental team climate, shedding light on the importance of the context in which servant leadership takes place. In addi-tion, two more research questions resulted from a review of the training literature, namely how and under which conditions servant leadership can be trained, and whether follower performance and well-being follow from servant leadership enhanced by training. We subsequently designed a servant leadership training and conducted a longitudinal field experiment to examine our sec-ond research question. Analyses were based on data from 38 leaders randomly assigned to a training or control condition, and 91 of their followers in 36 teams. Hierarchical linear modeling results showed that the training, which addressed the knowledge of, attitudes towards, and ability to apply servant leadership, positively affected leader and follower perceptions of servant leader-ship, but in the latter case only when leaders strongly identified with their team. These findings provide causal evidence as to how and when servant leadership can be effectively developed. Fi-nally, the research model of Study 1 was replicated in a third study based on 58 followers in 32 teams drawn from the same population used for Study 2, confirming that follower eudaimonic well-being and leader-rated performance follow from developing servant leadership via increases in psychological capital, and thus establishing the directionality of the examined relationships.

Effect of aspect ratio on thermal convection in open and closed systems

Internally heated fluids are found across the nuclear fuel cycle. In certain situations the motion of the fluid is driven by the decay heat (i.e. corium melt pools in severe accidents, the shutdown of liquid metal reactors, molten salt and the passive control of light water reactors) as well as normal operation (i.e. intermediate waste storage and generation IV reactor designs). This can in the long-term affect reactor vessel integrity or lead to localized hot spots and accumulation of solid wastes that may prompt local increases in activity. Two approaches to the modeling of internally heated convection are presented here. These are based on numerical analysis using codes developed in-house and simulations using widely available computational fluid dynamics solvers. Open and closed fluid layers at around the transition between conduction and convection of various aspect ratios are considered. We determine optimum domain aspect ratio (1:7:7 up to 1:24:24 for open systems and 5:5:1, 1:10:10 and 1:20:20 for closed systems), mesh resolutions and turbulence models required to accurately and efficiently capture the convection structures that evolve when perturbing the conductive state of the fluid layer. Note that the open and closed fluid layers we study here are bounded by a conducting surface over an insulating surface. Conclusions will be drawn on the influence of the periodic boundary conditions on the flow patterns observed. We have also examined the stability of the nonlinear solutions that we found with the aim of identifying the bifurcation sequence of these solutions en route to turbulence.

The boundary lubricated friction and wear of low alloy steel

Pin on disc wear machines were used to study the boundary lubricated friction and wear of AISI 52100 steel sliding partners. Boundary conditions were obtained by using speed and load combinations which resulted in friction coefficients in excess of 0.1. Lubrication was achieved using zero, 15 and 1000 ppm concentrations of an organic dimeric acid additive in a hydrocarbon base stock. Experiments were performed for sliding speeds of 0.2, 0.35 and 0.5 m/s for a range of loads up to 220 N. Wear rate, frictional force and pin temperature were continually monitored throughout tests and where possible complementary methods of measurement were used to improve accuracy. A number of analytical techniques were used to examine wear surfaces, debris and lubricants, namely: Scanning Electron Microscopy (SEM), Auger Electron Spectroscopy (AES), Powder X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), optical microscopy, Back scattered Electron Detection (BSED) and several metallographic techniques. Friction forces and wear rates were found to vary linearly with load for any given combination of speed and additive concentration. The additive itself was found to act as a surface oxidation inhibitor and as a lubricity enhancer, particularly in the case of the higher (1000 ppm) concentration. Wear was found to be due to a mild oxidational mechanism at low additive concentrations and a more severe metallic mechanism at higher concentrations with evidence of metallic delamination in the latter case. Scuffing loads were found to increase with increasing additive concentration and decrease with increasing speed as would be predicted by classical models of additive behaviour as an organo-metallic soap film. Heat flow considerations tended to suggest that surface temperature was not the overriding controlling factor in oxidational wear and a model is proposed which suggests oxygen concentration in the lubricant is the controlling factor in oxide growth and wear.

Determining the temperature from incomplete boundary data

An iterative procedure for determining temperature fields from Cauchy data given on a part of the boundary is presented. At each iteration step, a series of mixed well-posed boundary value problems are solved for the heat operator and its adjoint. A convergence proof of this method in a weighted L2-space is included, as well as a stopping criteria for the case of noisy data. Moreover, a solvability result in a weighted Sobolev space for a parabolic initial boundary value problem of second order with mixed boundary conditions is presented. Regularity of the solution is proved. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Two-phase flow analogy as an effective boundary condition for modelling liquids at atomistic resolution

A hybrid Molecular Dynamics/Fluctuating Hydrodynamics framework based on the analogy with two-phase hydrodynamics has been extended to dynamically tracking the feature of interest at all-atom resolution. In the model, the hydrodynamics description is used as an effective boundary condition to close the molecular dynamics solution without resorting to standard periodic boundary conditions. The approach is implemented in a popular Molecular Dynamics package GROMACS and results for two biomolecular systems are reported. A small peptide dialanine and a complete capsid of a virus porcine circovirus 2 in water are considered and shown to reproduce the structural and dynamic properties compared to those obtained in theory, purely atomistic simulations, and experiment.