The Mechanics of the drawing of polygonal sections from round at elevated temperature

Economic factors such as the rise in cost of raw materials, labour and power, are compelling manufacturers of cold-drawn polygonal sections, to seek new production routes which will enable the expansion in the varieties of metals used and the inclusion of difficult-to-draw materials. One such method generating considerable industrial interest is the drawing of polygonal sections from round at elevated temperature. The technique of drawing mild steel, medium carbon steel and boron steel wire into octagonal, hexagonal and square sections from round at up to 850 deg C and 50% reduction of area in one pass has been established. The main objective was to provide a basic understanding of the process, with particular emphasis being placed on modelling using both experimental and theoretical considerations. Elevated temperature stress-strain data was obtained using a modified torsion testing machine. Data were used in the upper bound solution derived and solved numerically to predict drawing stress strain, strain-rate, temperature and flow stress distribution in the deforming zone for a range of variables. The success of this warm working process will, of course, depend on the use of a satisfactory elevated temperature lubricant, an efficient cooling system, a suitable tool material having good wear and thermal shock resistance and an efficient die profile design which incorporates the principle of least work. The merits and demerits of die materials such as tungsten carbide, chromium carbide, Syalon and Stellite are discussed, principally from the standpoint of minimising drawing force and die wear. Generally, the experimental and theoretical results were in good agreement, the drawing stress could be predicted within close limits and the process proved to be technically feasible. Finite element analysis has been carried out on the various die geometries and die materials, to gain a greater understanding of the behaviour of these dies under the process of elevated temperature drawing, and to establish the temperature distribution and thermal distortion in the deforming zone, thus establishing the optimum die design and die material for the process. It is now possible to predict, for the materials already tested, (i) the optimum drawing temperature range, (ii) the maximum possible reduction of area per pass, (iii) the optimum drawing die profiles and die materials, (iv) the most efficient lubricant in terms of reducing the drawing force and die wear.

The influence of tool geometry on the performance of drilling tools

The main objective of the work presented in this thesis is to investigate the two sides of the flute, the face and the heel of a twist drill. The flute face was designed to yield straight diametral lips which could be extended to eliminate the chisel edge, and consequently a single cutting edge will be obtained. Since drill rigidity and space for chip conveyance have to be a compromise a theoretical expression is deduced which enables optimum chip disposal capacity to be described in terms of drill parameters. This expression is used to describe the flute heel side. Another main objective is to study the effect on drill performance of changing the conventional drill flute. Drills were manufactured according to the new flute design. Tests were run in order to compare the performance of a conventional flute drill and non conventional design put forward. The results showed that 50% reduction in thrust force and approximately 18% reduction in torque were attained for the new design. The flank wear was measured at the outer corner and found to be less for the new design drill than for the conventional one in the majority of cases. Hole quality, roundness, size and roughness were also considered as a further aspect of drill performance. Improvement in hole quality is shown to arise under certain cutting conditions. Accordingly it might be possible to use a hole which is produced in one pass of the new drill which previously would have required a drilled and reamed hole. A subsidiary objective is to design the form milling cutter that should be employed for milling the foregoing special flute from drill blank allowing for the interference effect. A mathematical analysis in conjunction with computing technique and computers is used. To control the grinding parameter, a prototype drill grinder was designed and built upon the framework of an existing cincinnati cutter grinder. The design and build of the new grinder is based on a computer aided drill point geometry analysis. In addition to the conical grinding concept, the new grinder is also used to produce spherical point utilizing a computer aided drill point geometry analysis.

Extreme value statistics in Raman fiber lasers

We present the numerical study of the statistical properties of the partially coherent quasi-CW high-Q cavity Raman fiber laser. The statistical properties are different for the radiation generated at the spectrum center or spectral wings. It is found that rare extreme events are generated at the far spectral wings at one pass only. The mechanism of the extreme events generation is a turbulent-like four-wave mixing of numerous longitudinal generation modes. The similar mechanism of extreme waves appearance during the laser generation could be important in other types of fiber lasers. © 2012 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Fair testing in employment selection

This project represents the collaboration of Charta Mede Ltd and the Interdisciplinary Higher Degrees Scheme at the University of Aston. The aim of the project was to monitor the effects of the Civil Service's Executive Officer Qualifying Test Battery on minority group applicants. Prior to monitoring the EO Test Battery, however, an ethnic classification had to be developed which was reliable, acceptable to respondents and appropriate for monitoring. Three pilot studies were conducted to examine these issues, during which different classifications and different ways of asking the question were trialled. The results indicated that by providing more precise instructions as to the meanings of categories, it was possible to obtain classifications which were acceptable and reliable. However, there were also certain terms and expressions which should be avoided such as those referring to colour and anthropological racial groups. Two classifications were used in the Executive Officer Study - one derived from an Office of Population Censuses and Surveys classification and one developed for this project - the MultiCultural British Classification. The results indicated that some minority groups (Asians, West Indians and Africans in particular) pass the tests in significantly lower proportions than the majority group and also score significantly less well on the tests. Factors which were significantly related to pass/fail and test scores included educational qualifications and age on entering the UK (the latter being negatively correlated). Using variables in this study, however, it was only possible to account for 5% of the variance in pass/fail rates and 11% of the variance in test scores. Analyses of covariance carried out indicated that the differences in test scores still remained even though the effects of significantly correlated variables were removed. Although indirect discrimination could not be inferred from the data, further research into differential validity and fairer methods of select ion is needed.

Service differentiation for the bandwidth request scheme in fixed IEEE 802.16 networks

IEEE 802.16 standards have been developed as one of the technical solutions for broadband wireless access systems. It has high data rate, large network coverage, flexible QoS schemes and cheap network deployment. Various flexible mechanisms related to QoS provisioning have been specified for uplink traffic at the medium access control (MAC) layer in the standards. Among the mechanisms, contention based bandwidth request scheme can be used to indicate bandwidth demands to the base station for the non-real-time polling and besteffort services. These two services are used for most application with unknown traffic characteristics. Due to the diverse QoS requirements of those applications, service differentiation (SD) is anticipated over the contention based bandwidth request scheme. In this paper we investigate the SD with the bandwidth request scheme by means of assigning different channel access parameters and bandwidth allocation priorities. The effectiveness of the differentiation schemes are evaluated by simulations. It is observed that the initial backoff window can be efficient in SD, and if combined with the bandwidth allocation priority, the SD performances will be better. ©2008 IEEE.

Appraisal of the Karnalí Employment Programme as a regional social protection scheme

The Karnali Employment Programme (KEP) is a public works based social protection scheme in one of the poorest parts of Nepal attempting to address the regional dimension of poverty and vulnerability.

Student input in the development of a marking scheme for improved engineering logbooks

Engineers logbooks are an important part of the CDIO process, as a prequel to the logooks they will be expected to keep when in industry. Previously however, students logbooks were insufficient and students did not appear to appreciate the importance of the logbooks or how they would be assessed. In an attempt to improve the students understanding and quality of logbooks, a group of ~100 1st year CDIO students were asked to collaboratively develop a marking matrix with the tutors. The anticipated outcome was that students would have more ownership in, and a deeper understanding of, the logbook and what is expected from the student during assessment. A revised marking matrix was developed in class and a short questionnaire was implemented on delivery of the adapted matrix to gauge the students response to the process. Marks from the logbooks were collected twice during teaching period one and two and compared to marks from previous years. This poster will deliver the methodology and outcomes for this venture.

Simple one-electron invariants of molecular chirality

Pseudoscalar measures of electronic chirality for molecular systems are derived using the spectral moment theory applied to the frequency-dependent rotational susceptibility. In this scheme a one-electron chirality operator κ^ naturally emerges as a quantum counterpart of the triple scalar product, involving velocity, acceleration and second acceleration. Averaging κ^ over an electronic state vector gives rise to an additive chirality invariant (κ-index), considered as a quantitative measure of chirality. A simple computational technique for quick calculation of the κ-index is developed and various structural classes (cyclic hydrocarbons, cage-shaped systems, etc.) are studied. Reasonable behaviour of the chirality index is demonstrated. The chirality changes during the β-turn formation in Leu-Enkephalin is presented as a useful example of the chirality analysis for conformational transitions.

Financial consequences of one-stop dispensing at Birmingham Children's Hospital

Poster session - Costs for one stop dispensing and the use of patients’ own drugs (PODs) were compared with traditional dispensing costs - It was found that operating a one-stop dispensing scheme, with the use of PODs where applicable, could save an average of £4.35 per patient per day on ward A and £5.19 per patient per day on ward B - These saving would equate to annual savings of £24,000 on ward A and £34,000 on ward B - Additional savings can be made to the secondary care budget as no in-patient drugs would be wasted upon patient discharge - These additional savings are an average £25.19 per patient on ward A and £13.42 per patient on ward B

Online sensorless position estimation for switched reluctance motors using one current sensor

This paper proposes an online sensorless rotor position estimation technique for switched reluctance motors (SRMs) using just one current sensor. It is achieved by first decoupling the excitation current from the bus current. Two phase-shifted pulse width modulation signals are injected into the relevant lower transistors in the asymmetrical half-bridge converter for short intervals during each current fundamental cycle. Analog-to-digital converters are triggered in the pause middles of the dual pulse to separate the bus current for excitation current recognition. Next, the rotor position is estimated from the excitation current, by a current-rise-time method in the current-chopping-control mode in a low-speed operation and a current-gradient method in the voltage-pulse-control mode in a high-speed operation. The proposed scheme requires only a bus current sensor and a minor change to the converter circuit, without a need for individual phase current sensors or additional detection devices, achieving a more compact and cost-effective drive. The performance of the sensorless SRM drive is fully investigated. The simulation and experiments on a 750-W three-phase 12/8-pole SRM are carried out to verify the effectiveness of the proposed scheme.

Wavelet packet decomposition-based fault diagnosis scheme for SRM drives with a single current sensor

Power converters are a key, but vulnerable component in switched reluctance motor (SRM) drives. In this paper, a new fault diagnosis scheme for SRM converters is proposed based on the wavelet packet decomposition (WPD) with a dc-link current sensor. Open- and short-circuit faults of the power switches in an asymmetrical half-bridge converter are analyzed in details. In order to obtain the fault signature from the phase currents, two pulse-width modulation signals with phase shift are injected into the lower-switches of the converter to extract the excitation current, and the WPD algorithm is then applied to the detected currents for fault diagnosis. Moreover, a discrete degree of the wavelet packet node energy is chosen as the fault coefficient. The converter faults can be diagnosed and located directly by determining the changes in the discrete degree from the detected currents. The proposed scheme requires only one current sensor in the dc link, while conventional methods need one sensor for each phase or additional detection circuits. The experimental results on a 750-W three-phase SRM are presented to confirm the effectiveness of the proposed fault diagnosis scheme.

Connectionist-based rules describing the pass-through of individual goods prices into trend inflation in the United States

This paper demonstrates a mechanism whereby rules can be extracted from a feedforward neural network trained to characterize the inflation "pass-through" problem in American monetary policy, defined as the relationship between changes in the growth rate(s) of individual commodities and the economy-wide rate of growth of consumer prices. Monthly price data are encoded and used to train a group of candidate connectionist architectures. One candidate is selected for rule extraction, using a custom decompositional extraction algorithm that generates rules in human-readable and machine-executable form. Rule and network accuracy are compared, and comments are made on the relationships expressed within the discovered rules. The types of discovered relationships could be used to guide monetary policy decisions.

Building environmental assessment scheme for residential building in Brunei

Building's construction activities, operation and demolition are increasingly recognised as a major source of environmental impact. One strategy for reducing such impacts is most widely known by the term Building Environmental Assessment (BEA). The research is an attempt to develop a new BEA scheme for residential buildings in Brunei which focussing on identifying BEA indicators that best suit for Brunei environment, social and economy. Studies show that Brunei residential sector needs urgent attention to transform its current consumption rate in more sustainable way. Recent launch of Brunei Green Building Council, mandatory energy efficiency guidelines and declaration of ambitious energy intensity reduction target, a new BEA scheme will help contribute sustainability target in residential sector. However the issues of developing a new BEA schemes using existing methods may face constraints in their effectiveness. In this regard, a consensus-forming technique-Delphi method-helps improve greater communication and gain consensus from experts in the construction industry through series of questionnaires. As a result, the final framework is produced comprises of 7 key categories and 37 applicable criteria that achieved high degree of consensus and importance.