The effects of caffeine consumption on direct and indirect majority and minority influence

A study is reported that examines the effect of caffeine consumption on majority and minority influence. In a double blind procedure, 72 participants consumed an orange drink, which either contained caffeine (3.5mg per kilogram of body weight) or did not (placebo). After a 40-minute delay, participants read a counter-attitudinal message (antivoluntary euthanasia) endorsed by either a numerical majority or minority. Both direct (message issue, i.e., voluntary euthanasia) and indirect (message issue-related, i.e., abortion) change was assessed by attitude scales completed before and after exposure to the message. In the placebo condition, the findings replicated the predictions of Moscovici's (1980) conversion theory; namely, majorities leading to compliance (direct influence) and minorities leading to conversion (indirect influence). When participants had consumed caffeine, majorities not only led to more direct influence than in the placebo condition but also to indirect influence. Minorities, by contrast, had no impact on either level of influence. The results suggest that moderate levels of caffeine increase systematic processing of the message but the consequences of this vary for each source. When the source is a majority there was increased indirect influence while for a minority there was decreased indirect influence. The results show the need to understand how contextual factors can affect social influence processes.

Perceiving edge blur: Gaussian-derivative filtering and a rectifying nonlinearity

We studied the visual mechanisms that encode edge blur in images. Our previous work suggested that the visual system spatially differentiates the luminance profile twice to create the `signature' of the edge, and then evaluates the spatial scale of this signature profile by applying Gaussian derivative templates of different sizes. The scale of the best-fitting template indicates the blur of the edge. In blur-matching experiments, a staircase procedure was used to adjust the blur of a comparison edge (40% contrast, 0.3 s duration) until it appeared to match the blur of test edges at different contrasts (5% - 40%) and blurs (6 - 32 min of arc). Results showed that lower-contrast edges looked progressively sharper. We also added a linear luminance gradient to blurred test edges. When the added gradient was of opposite polarity to the edge gradient, it made the edge look progressively sharper. Both effects can be explained quantitatively by the action of a half-wave rectifying nonlinearity that sits between the first and second (linear) differentiating stages. This rectifier was introduced to account for a range of other effects on perceived blur (Barbieri-Hesse and Georgeson, 2002 Perception 31 Supplement, 54), but it readily predicts the influence of the negative ramp. The effect of contrast arises because the rectifier has a threshold: it not only suppresses negative values but also small positive values. At low contrasts, more of the gradient profile falls below threshold and its effective spatial scale shrinks in size, leading to perceived sharpening.

Perceiving edge blur: linear filtering and a rectifying nonlinearity

We studied the visual mechanisms that encode edge blur in images. Our previous work suggested that the visual system spatially differentiates the luminance profile twice to create the 'signature' of the edge, and then evaluates the spatial scale of this signature profile by applying Gaussian derivative templates of different sizes. The scale of the best-fitting template indicates the blur of the edge. In blur-matching experiments, a staircase procedure was used to adjust the blur of a comparison edge (40% contrast, 0.3 s duration) until it appeared to match the blur of test edges at different contrasts (5% - 40%) and blurs (6 - 32 min of arc). Results showed that lower-contrast edges looked progressively sharper.We also added a linear luminance gradient to blurred test edges. When the added gradient was of opposite polarity to the edge gradient, it made the edge look progressively sharper. Both effects can be explained quantitatively by the action of a half-wave rectifying nonlinearity that sits between the first and second (linear) differentiating stages. This rectifier was introduced to account for a range of other effects on perceived blur (Barbieri-Hesse and Georgeson, 2002 Perception 31 Supplement, 54), but it readily predicts the influence of the negative ramp. The effect of contrast arises because the rectifier has a threshold: it not only suppresses negative values but also small positive values. At low contrasts, more of the gradient profile falls below threshold and its effective spatial scale shrinks in size, leading to perceived sharpening.

Development and evaluation of an ion induced x-ray emission system for the analysis of light and medium weight elements

The present work describes the development of a proton induced X-ray emission (PIXE) analysis system, especially designed and builtfor routine quantitative multi-elemental analysis of a large number of samples. The historical and general developments of the analytical technique and the physical processes involved are discussed. The philosophy, design, constructional details and evaluation of a versatile vacuum chamber, an automatic multi-sample changer, an on-demand beam pulsing system and ion beam current monitoring facility are described.The system calibration using thin standard foils of Si, P, S,Cl, K, Ca, Ti, V, Fe, Cu, Ga, Ge, Rb, Y and Mo was undertaken at proton beam energies of 1 to 3 MeV in steps of 0.5 MeV energy and compared with theoretical calculations. An independent calibration check using bovine liver Standard Reference Material was performed.  The minimum detectable limits have been experimentally determined at detector positions of 90° and 135° with respect to the incident beam for the above range of proton energies as a function of atomic number Z. The system has detection limits of typically 10- 7 to 10- 9 g for elements 14

Simplified preparation of human arterial sections for PCR analysis of Chlamydia pneumoniae and human DNA

AIMS: To investigate multiple techniques for the preparation of solid tissue for polymerase chain reaction (PCR) analysis, and to identify the most simple techniques for routine use in the laboratory. METHODS: Techniques for the preparation of arterial tissue samples including homogenisation, ultrafiltration, and treatments involving proteinase K, Gene Clean, lectin, and Fe3+ specific chelators were evaluated using the PCR to amplify both Chlamydia pneumoniae and human DNA. RESULTS: Treatment with either Gene-Clean or lectin and the Fe3+ specific chelator deferoxamine mesylate removed PCR inhibitors from tissue homogenates. Homogenisation followed by GeneClean treatment resulted in the amplification of C pneumoniae DNA from within a section of atherosclerotic carotid artery, implying that C pneumoniae elementary bodies had been disrupted. In eight further clinical samples from patients not known to have C pneumoniae infection, human DNA was amplified and no cross contamination was observed between samples. These samples contained no evidence of C pneumoniae by PCR. CONCLUSIONS: A simple preparation of solid tissue for PCR analysis, involving homogenisation followed by GeneClean treatment has been developed, and is effective for the amplification of both C pneumoniae and human DNA.

Data methods in optometry. Part 6: fitting a regression line to data

1. Fitting a linear regression to data provides much more information about the relationship between two variables than a simple correlation test. A goodness of fit test of the line should always be carried out. Hence, r squared estimates the strength of the relationship between Y and X, ANOVA whether a statistically significant line is present, and the ‘t’ test whether the slope of the line is significantly different from zero. 2. Always check whether the data collected fit the assumptions for regression analysis and, if not, whether a transformation of the Y and/or X variables is necessary. 3. If the regression line is to be used for prediction, it is important to determine whether the prediction involves an individual y value or a mean. Care should be taken if predictions are made close to the extremities of the data and are subject to considerable error if x falls beyond the range of the data. Multiple predictions require correction of the P values. 3. If several individual regression lines have been calculated from a number of similar sets of data, consider whether they should be combined to form a single regression line. 4. If the data exhibit a degree of curvature, then fitting a higher-order polynomial curve may provide a better fit than a straight line. In this case, a test of whether the data depart significantly from a linear regression should be carried out.

Morningness-eveningness orientation and attitude change:evidence for greater systematic processing and attitude change at optimal time-of-day

This study examines the relationship between morningness-eveningness orientation and time-of day on attitude change, and tests the hypothesis that people will be more persuaded when tested at their optimal time-of-day (i.e., morning for M-types and evening for E-types) than non-optimal time-of-day (i.e., evening for M-Types and morning for E-types). Two hundred and twenty participants read a message that contained either strong vs. weak quality counter-attitudinal arguments (anti-voluntary euthanasia) in the morning (9.00. a.m.) or in the evening (7.00. p.m.). When tested at their respective optimal time-of-day (for both M- and E-types) there was a reliable difference in attitude change between the strong vs. weak messages (indicating message processing had occurred) while there was no difference between strong vs. weak messages when tested at their non-optimal time-of-day. In addition, the amount of message-congruent thinking mediated the attitude change. The results show that M- and E-types pay greater attention to and elaborate on a persuasive message at their optimal time-of-day, and this leads to increased attitude change, compared to those tested at their non-optimal time-of-day. © 2012.

Localized waves in optical systems with periodic dispersion and nonlinearity management

We overview our recent developments in the theory of dispersion-managed (DM) solitons within the context of optical applications. First, we present a class of localized solutions with a period multiple to that of the standard DM soliton in the nonlinear Schrödinger equation with periodic variations of the dispersion. In the framework of a reduced ordinary differential equation-based model, we discuss the key features of these structures, such as a smaller energy compared to traditional DM solitons with the same temporal width. Next, we present new results on dissipative DM solitons, which occur in the context of mode-locked lasers. By means of numerical simulations and a reduced variational model of the complex Ginzburg-Landau equation, we analyze the influence of the different dissipative processes that take place in a laser.

Optical sensor based on hybrid LPG/FBG in D-fiber for simultaneous refractive index and temperature measurement

A dual-parameter optical sensor has been realized by UV-writing a long-period and a Bragg grating structure in D-fiber. The hybrid configuration permits the detection of the temperature from the latter and measuring the external refractive index from the former responses, respectively. The employment of the D-fiber allows as effective modification and enhancement of the device sensitivity by cladding etching. The grating sensor has been used to measure the concentrations of aqueous sugar solutions, demonstrating the potential capability to detect concentration changes as small as 0.01%.

Philosophy, theory, and practice of green operations management

This paper proposes a more profound discussion of the philosophical underpins of sustainability than currently exists in the MOT literature and considers their influence on the construction of the theories on green operations and technology management. Ultimately, it also debates the link between theory and practice on this subject area. The paper is derived from insights gained in three research projects completed during the past twelve years, primarily involving the first author. From 2000 to 2002, an investigation using scenario analysis, aimed at reducing atmospheric pollution in urban centres by substituting natural gas for petrol and diesel, provided the first set of insights about public policy, environmental impacts, investment analysis, and technological feasibility. The second research project, from 2003 to 2005, using a survey questionnaire, was aimed at improving environmental performance in livestock farming and explored the issues of green supply chain scope, environmental strategy and priorities. Finally, the third project, from 2006 to 2011, investigated environmental decisions in manufacturing organisations through case study research and examined the underlying sustainability drivers and decision-making processes. By integrating the findings and conclusions from these projects, the link between philosophy, theory, and practice of green operations and technology management is debated. The findings from all these studies show that the philosophical debate seems to have little influence on theory building so far. For instance, although ‘sustainable development’ emphasises ‘meeting the needs of current and future generation’, no theory links essentiality and environmental impacts. Likewise, there is a weak link between theory and the practical issues of green operations and technology management. For example, the well-known ‘life-cycle analysis’ has little application in many cases because the life cycle of products these days is dispersed within global production and consumption systems and there are different stakeholders for each life cycle stage. The results from this paper are relevant to public policy making and corporate environmental strategy and decision making. Most of the past and current studies in the subject of green operations and sustainability management deal with only a single sustainability dimension at any one time. Here the value and originality of this paper lies in its integration between philosophy, theory, and practice of green technology and operations management.

Performance comparison of SSMF and ultra wave fibers for ultra-long-haul 40-Gb/s WDM transmission

We experimentally compare the performance of standard single-mode fiber (SSMF) and UltraWave fiber (UWF) for ultra-long-haul (ULH) 40-Gb/s wavelength- division- multiplexing transmissions. We used the carrier-suppressed return-to-zero amplitude-shift-keying (CSRZ-ASK) and the carrier-suppressed return-to-zero differential-phase-shift-keying (CSRZ-DPSK) formats, which are particularly well-adapted to 40-Gb/s pulse-overlapped propagation. We demonstrate that transmission distance well beyond 2000 km can be reached on UWF with both the CSRZ-ASK and CSRZ-DPSK formats, or on SSMF with the CSRZ-DPSK format only, thus indicating that SSMF-based infrastructure of incumbent carriers can be upgraded at 40-Gb/s channel rates to ULH distances. © 2007 IEEE.

Effects of crack length and shape on the fracture toughness of a high strength steel 300m

The results of fracture toughness tests on a high strength steel 300m are presented. These results show (i) that in the presence of through-thickness cracks the toughness remains constant down to (a/W)-ratios as low as 0.01 and failure loads up to 0.85σy, and (ii) that the material is more resistant to crack growth when the cracks are semi-elliptical in shape, giving a toughness value which is almost 25 per cent higher than the through-thickness one. Three independent stress analyses are used to obtain stress intensity values for the semi-elliptical cracks and additional confirmation of the increase in toughness comes from stretch zone measurements.

Aminoglutethimide-induced leucopenia in a mouse model:effects of metabolic and structural determinates

A model of human leucopenia has been developed further in the female mouse. Following daily administration to female mice of 50 mg/kg of the aromatase inhibitor aminoglutethimide, significant falls in platelet and white cell counts occurred after 2 and 3 weeks. At week 4, drug dosage was stopped and the cell counts recovered at the end of that week, although on rechallenge at the beginning of week 5, both platelet and white cell counts fell rapidly. Administration to the mice of structural analogues of aminoglutethimide, such as WSP-3, glutethimide and 4-nitroglutethimide, showed no reductions in platelet and white cell counts. The haemotoxicity of aminoglutethimide over 21 days was unaffected by the presence of either the P-450 inhibitor SKF-525A or the hepatic P-450 inducer phenobarbitone. However, the co-administration of cimetidine abolished the haemotoxicity of aminoglutethimide in terms of platelet and white cell levels. In in vitro studies, both aminoglutethimide and WSP-3 were oxidised to cytotoxic species, although aminoglutethimide was significantly more cytotoxic than WSP-3. The NADPH-dependent covalent binding of 14C aminoglutethimide to mouse microsomes in vitro was significantly reduced by the presence of cimetidine. The activation of the compound to reactive species in vitro, the inhibitory effects of cimetidine in vivo and in vitro, as well as the rapid fall in the in vivo white cell count on rechallenge with aminoglutethimide suggest that this model illustrates a form of leucopenia which may be related to hapten formation and subsequent immune-mediated platelet and white cell lysis. © 2003 Elsevier B.V. All rights reserved.