Evolution of capital structure in East Asia - corporate inertia of endeavours?

The paper examines the capital structure adjustment dynamics of listed non-financial corporations in seven east Asian countries before, during and after the crisis of 1997–1998. Our methodology allows for speeds of adjustment to vary, not only among firms, but also over time, distinguishing between cases of sudden and smooth adjustment.Whereas, compared with firms in the least affected countries, average leverages were much higher, generalized method-ofmoments analysis of the Worldscope panel data suggests that average speeds of adjustment were lower in the worst affected countries. This holds also for the severely financially distressed firms in some worst affected countries, though the trend reversed in the post-crisis period. These findings have important implications for the regulatory environment as well as access to market finance.

On the solution of a class of capital investment problems

In this work the solution of a class of capital investment problems is considered within the framework of mathematical programming. Upon the basis of the net present value criterion, the problems in question are mainly characterized by the fact that the cost of capital is defined as a non-decreasing function of the investment requirements. Capital rationing and some cases of technological dependence are also included, this approach leading to zero-one non-linear programming problems, for which specifically designed solution procedures supported by a general branch and bound development are presented. In the context of both this development and the relevant mathematical properties of the previously mentioned zero-one programs, a generalized zero-one model is also discussed. Finally,a variant of the scheme, connected with the search sequencing of optimal solutions, is presented as an alternative in which reduced storage limitations are encountered.

Forms of capital, mixed embeddedness and Somali enterprise

What form is small business activity taking among new migrants in the UK? This question is addressed by examining the case of Somalis in the English city of Leicester.We apply a novel synthesis of the Nee and Sanders' (2001) `forms of capital' model with the `mixed embeddedness' approach (Rath, 2000) to enterprises established by newly arrived immigrant communities, combining agency and structure perspectives. Data are drawn from business-owners (and workers) themselves, rather than community representatives. Face-to-face in-depth interviews were held with 25 business owners and 25 employees/`helpers', supplemented by 3 focus group encounters with different segments of the Somali business population.The findings indicate that a reliance solely on social capital explanations is not sufficient. An adequate understanding of business dynamics requires an appreciation of how Somalis mobilize different forms of capital within a given political, social and economic context.

Changing treaty and changing economic context:the dynamic relationship of the legislature and the judiciary in the pursuit of capital liberalisation

Introduction For a significant period of time (the late 1950s--1980s), a lack of capital freedom was a major obstacle to the progress of the internal market project. The free movements of goods, persons and services were achieved, and developed, primarily through the case law of the Court of Justice of the European Union (CJEU). On the other hand, the Court played a (self-imposed) limited role in the development of the free movement of capital. It was through a progressive series of legislation that the freedom was finally achieved. John Usher has noted that the consequence of this is that ‘free movement of capital thus became the only Treaty “freedom” to be achieved in the manner envisaged in the Treaty’. For this reason, the relationship of the Court and legislature in this area is of particular importance in the broader context of the internal market. The rest of this chapter is split into four sections and will attempt to describe (and account for) the differing relationships between the legislature and the judiciary during the different stages of capital liberalisation. Section 2 will deal with the situation under the original Treaty of Rome. Section 3 will examine a single legislative intervention: Directive 88/361. It was this intervention that contained the obligation for Member States to fully liberalise capital movements. It is therefore the most important contribution to the completion of the internal market in the capital sphere. An examination will be made of whether the interpretation of the Directive demonstrates a changed (or changing attitude) of the Court towards the EU legislature. Section 4 will examine the changes brought about by the Treaty on European Union in 1993. It was at Maastricht that the Member States finally introduced into the Treaty framework an absolute obligation to liberalise capital movements. Finally, Section 5 will consider the Treaty of Lisbon and the possibility of future interventions by the legislature. By looking at the patterns that run through the different parts, this chapter will attempt to engage with the question of whether the approaches were products of their historical context, or whether they can be applied to other areas within the capital movement sphere.

New technology adoption in developing countries:the role of buyer-supplier relationships

Developing countries depend on foreign providers to ensure successful adoption of new technology. This paper investigates the role of buyer-supplier relationships (BSR) in technology adoption using a survey of 147 Malaysian firms. In particular the authors examined the impact on performance of different patterns of buyer-supplier relationship. Results show that firms demonstrating closer relationships with their suppliers are more likely to achieve higher levels of performance than those that do not. There are also insights that are especially pertinent to an improved understanding of buyersupplier relationships in the procurement of capital equipment, about which the current research literature is limited.

Policy into practice:a study of public policy implementation and the role of learning

Public policy becomes managerial practice through a process of implementation. There is an established literature within Implementation Studies which explains the variables and some of the processes involved in implementation, but less attention has been focused upon how public service managers convert new policy initiatives into practice. The research proposes that managers and their organisations have to go through a process of learning in order to achieve the implementation of public policy. Data was collected over a five year period from four case studies of capital investment appraisal in the British National Health Service. Further data was collected from taped interviews by key actors within the case studies. The findings suggest that managers do learn to implement policy and four factors are important in this learning process. These are; (i) the nature of bureaucratic responsibility; (ii) the motivation of actors towards learning; (iii) the passage of time which allows for the development of competence and (iv) the use of project team structures. The research has demonstrated that the conversion of policy into practice occurs through the operationalisation of solutions to policy problems via job tasks. As such it suggests that in understanding how policy is implemented, technical learning is more important than cultural learning, in this context. In conclusion, a "Model of Learned Implementation" is presented, together with a discussion of some of the implications of the research. These are the possible use of more pilot projects for new policy initiatives and the more systematic diffusion of knowledge about implementation solutions.

The impact of foreign direct investment on labour productivity in the Chinese electronics industry

Foreign direct investment (FDI) may have a positive impact on labour productivity in recipient industries through direct introduction of capital, technology and management skills and indirectly through spillover effects on domestic firms. This study uses a model intended to examine the overall effects of inward FDI in the Chinese electronics industry. Official data are used for 41 sub-sectors of the industry in 1996 and 1997 having differing levels of FDI. Labour productivity is modelled as dependent on the degree of foreign presence in the industry and other variables, namely capital intensity, human capital and firm size for scale factors. The econometric results suggest that foreign presence in the industry is associated with higher labour productivity. © 2001 Elsevier Science Ltd.

Advanced manufacturing technology adoption in developing countries:the role of buyer-supplier relationships

Purpose – Developing countries are heavily dependent on the resources and commitment of foreign providers to ensure successful adoption of advanced manufacturing technology (AMT). The purpose of this paper is to describe the important role of buyer-supplier relationships (BSRs) in the process of technology selection, acquisition and implementation. Design/methodology/approach – A survey of 147 Malaysian manufacturing firms is the main instrument used in the research investigations and data analysis is carried out by the structured equation modelling (SEM) technique. In particular, the authors examine the impact on performance of different patterns of relationship between technology buyers and suppliers. Findings – Although the majority of the firms reported improvements in their performance since the acquisition of AMT, closer investigation reveals that those demonstrating a closer relationship with their suppliers are more likely to achieve higher levels of technology and implementation performance (IP) than those that do not. Research limitations/implications – The paper only assesses the strength of BSR from the buyers' perspective and they may have limited experience of acquisition, whereas suppliers may have more experience of selling AMT. Also, the research is undertaken in Malaysia and the findings may be different in other countries, especially where the technology being acquired is not imported but sourced locally. Practical implications – The findings relating to BSR, technology acquisition and IP have important implications both for customers and supplier firms as well as for industrial policy makers in developing countries. Originality/value – The result of the research provides useful insights that are especially pertinent to an improved understanding of BSRs in the procurement of capital equipment, about which the current research literature is limited.

Cost and performance analysis of new wood-fuelled power plant concepts

The objective of the thesis was to analyse several process configurations for the production of electricity from biomass. Process simulation models using AspenPlus aimed at calculating the industrial performance of power plant concepts were built, tested, and used for analysis. The criteria used in analysis were performance and cost. All of the advanced systems appear to have higher efficiencies than the commercial reference, the Rankine cycle. However, advanced systems typically have a higher cost of electricity (COE) than the Rankine power plant. High efficiencies do not reduce fuel costs enough to compensate for the high capital costs of advanced concepts. The successful reduction of capital costs would appear to be the key to the introduction of the new systems. Capital costs account for a considerable, often dominant, part of the cost of electricity in these concepts. All of the systems have higher specific investment costs than the conventional industrial alternative, i.e. the Rankine power plant; Combined beat and power production (CUP) is currently the only industrial area of application in which bio-power costs can be considerably reduced to make them competitive. Based on the results of this work, AsperiPlus is an appropriate simulation platform. How-ever, the usefulness of the models could be improved if a number of unit operations were modelled in greater detail. The dryer, gasifier, fast pyrolysis, gas engine and gas turbine models could be improved.

The molecular design of a new solvent for the absorption of carbon dioxide

Gas absorption, the removal of one or more constitutents from a gas mixture, is widely used in chemical processes. In many gas absorption processes, the gas mixture is already at high pressure and in recent years organic solvents have been developed for the process of physical absorption at high pressure followed by low pressure regeneration of the solvent and recovery of the absorbed gases. Until now the discovery of new solvents has usually been by expensive and time consuming trial and error laboratory tests. This work describes a new approach, whereby a solvent is selected from considerations of its molecular structure by applying recently published methods of predicting gas solubility from the molecular groups which make up the solvent molecule. The removal of the acid gases of carbon dioxide and hydrogen sulfide from methane or hydrogen was used as a commercially important example. After a preliminary assessment to identify promising moecular groups, more than eighty new solvent molecules were designed and evaluated by predicting gas solubility. The other important physical properties were also predicted by appropriate theoretical procedures, and a commercially promising new solvent was chosen to have a high solubility for acid gases, a low solubility for methane and hydrogen, a low vapour pressure, and a low viscosity. The solvent chosen, of molecular structure Ch3-COCH2-CH2-CO-CH3, was tested in the laboratory and shown to have physical properties, except for vapour pressures, close to those predicted. That is gas solubilities were within 10% but lower than predicted. Viscosity within 10% but higher than predicted and a vapour pressure significantly lower than predicted. A computer program was written to predict gas solubility in the new solvent at the high pressures (25 bar) used in practice. This is based on the group contribution method of Skold Jorgensen (1984). Before using this with the new solvent, Acetonyl acetone, the method was show to be sufficiently accurate by comparing predicted values of gas solubility with experimental solubilities from the literature for 14 systems up to 50 bar. A test of the commercial potential of the new solvent was made by means of two design studies which compared the size of plant and approximate relative costs of absorbing acid gases by means of the new solvent with other commonly used solvents. These were refrigerated methanol(Rectisol process) and Dimethyl Ether or Polyethylene Glycol(Selexol process). Both studies showed in terms of capital and operating cost some significant advantage for plant designed for the new solvent process.

Financial liberalization and dynamics of firm-level financing and investment decisions in the Southeast Asian countries

This thesis examines the dynamics of firm-level financing and investment decisions for six Southeast Asian countries. The study provides empirical evidence on the impacts of changes in the firm-level financing decisions during the period of financial liberalization by considering the debt and equity financing decisions of a set of non-financial firms. The empirical results show that firms in Indonesia, Pakistan, and South Korea have relatively faster speed of adjustment than other Southeast Asian countries to attain optimal debt and equity ratios in response to banking sector and stock market liberalization. In addition, contrary to widely held belief that firms adjust their financial ratios to industry levels, the results indicate that industry factors do not significantly impact on the speed of capital structure adjustments. This study also shows that non-linear estimation methods are more appropriate than linear estimation methods for capturing changes in capital structure. The empirical results also show that international stock market integration of these countries has significantly reduced the equity risk premium as well as the firm-level cost of equity capital. Thus stock market liberalization is associated with a decrease in the cost of equity capital of the firms. Developments in the securities markets infrastructure have also reduced the cost of equity capital. However, with increased integration there is the possibility of capital outflows from the emerging markets, which might reverse the pattern of decrease in cost of capital in these markets.

Evaluation of public housing strategies in Mexico City : an exploratory goal programming approach

This thesis describes the development and use of a goal programming methodology for the evaluation of public housjng strategies in Mexico City, The methodology responds to the need to incorporate the location, size and densities of housing projects on the one hand, and "external" constraints such as the ability of low income families to pay for housing, and the amounts of capital and land available, on the other. The provision of low cost housing by public housing agencies in Mexico City is becoming increasingly difficult because there are so many constraints to be met and overcome, the most important of which is the ability of families to pay for housing. Other important limiting factors are the availability of capital and of land plots of the right size in desired locations. The location of public housing projects is significant because it determines the cost and pattern of work trips, which in a metropolitan area such as Mexico City are of considerable importance to both planners and potential. house owners. In addition, since the price of land is closely related to its location, the last factor is also significant in determining the price of the total housing package. Consequently there is a major trade-off between a housing strategy based on the provision of housing at locations close to employment, and the opposite one based on the provjsion of housjng at locations where employment accessibility is poorer but housing can be provided at a lower price. The goal programming evaluation methodology presented in this thesis was developed to aid housing planners to evaluate housing strategies which incorporate the issues raised above,

Product design in the context of the social needs in less industrialised economies

This thesis is related to the subject of technical innovation, specifically to the activity of design in microenterprises operating in less industrialised economies. Design here is understood as a process, which is not the sole domain of formally trained categories such as engineers, architects or industrial designers. The 'professional boundary' discussion in this investigation is perceived as secondary as, in this context, products are designed, copied or adapted by workers, entrepreneurs themselves, or directly by the poor community. Design capacity at this level is considered to be important both in relation to the conception of capital and consumer goods and to the building up of technical knowledge. Although professional design emerged in Latin America little over three decades ago, this activity has remained marginalised throughout industry. Design activity tends to be concentrated in some product categories in the formalised industrial sector. For microenterprises operating informally, industrial design appears to be unknown. The existing literature pays little attention to 'informal design' capacity. Other areas of knowledge, such as development economies, recognise the importance of microenterprises and technological capability but neglect the potential role of industrial design in small manufacturing units. The management literature, though it focuses on technical innovation and design, has also paid little attention to 'informal design'. In less industrialised economies this neglect is felt by the lack of programmes specifically tailored to create or stimulate 'informal design'. There is a need for recognition of 'informal design' capacity and for the implementation of programmes which specifically target design as a central activity in the manufacturing firm, independent of their size and technological capability. Addressing 'design by the poor for the poor', requires a down-to-earth approach.