Factors affecting the durability of 5.25 inch floppy diskette media and its mechanisms of wear

This project is targeted towards establishing the durability and mechanisms of wear involved in the use of 5.25 inch magnetic floppy diskettes with particular reference to the media manufactured by the Minnesota Mining and Manufacturing Company, 3M Center, St. Paul, Minnesota, USA. In the present work most stress has been laid on the presentation of the conclusions drawn from the results obtained using samples produced specifically for this project. These samples were produced on the pilot plant at 3MTM, St. Paul, USA and are identified by the code 58759-4 with sample numbers SR1 to SR4 each with different lubrication conditions. All of the categories have been produced with four different surface roughnesses by varying the degree of burnishing. It has been found that the mechanisms of wear are related to a fatigue process. Some surprises have been noted in respect of the value of burnishing compared to the observations made elsewhere. Good reasons for these observed differences have been noted, however, and it will be shown that these are merely superficial and not concerned with wear of any real type. The present work reports the effects of the changes in the media's lubrication status and its surface topography as well as presenting evidence for the suggested wear mechanisms.

The role of accounting in planning and control: with special reference to the Egyptian iron and steel company Hadisolb

This thesis investigates the role of accounting in planning and control in the Egyptian Iron and Steel Company "Hadisolb". The hypothesis is that there should be planning and control at appropriate levels, with a significant accounting involvement, In an organisation such as the Egyptian Iron and Steel Company "Hadisolb" . Part One of the thesis explains the role of accounting in planning and control, with special emphasis on its role in long-range corporate planning and control. Parts Two and Three review the history of the Egyptian Iron and Steel Company "Hadisolb", its organisation and structure, also the role of accounting in its planning and control arrangements, together with comments and criticisms concerning this. Part Four is mainly recommendations for alterations or improvements in planning and control in Hadisolb. This includes a suggested planning and organisation structure, physical and cost control reporting structures.

Canadian province-building : the state as educator and entrepreneur in Alberta

This study provides an account and analysis of the development of systems of educational provision In capitalist democracies, especially in connection with the social origin and relative autonony of those systems. Using the case study of Athabasca University, a Canadian distance-education institution in the province of Alberta, the study is a critical work of historical sociology, in which the shifting social role of a system of educational provision during two transitions of a regional political economy is analyzed. Comparative observations are made in reference to other systems of educational provision and organizations, in particular the training department of a large Company based In the same region as the Unversity. The study explores the social origin and relative autonomy of systems of educational provision In relation to educational ideologies, which are themselves associated with social ideologies. Pierre Bourdieu's theoretical construction of "fields of power'' allows for a consideration of power as a relational phenomenon in the study. In other words, power is understood as being exercised in a way that simultaneously takes account of the power of other actors and groups. Fields of power also allow for an analysis of power as it is exercised at various levels of organizations and within society. The study is organized in two phases. First, an account is developed of the historical period in which the Unlversity and the Company were created, but especially the period of establishment for the Unlversity, 1970 - 75. Conclusions are offered concerning the causal associations between the historical antecedents that gave rise to the two organlzations. It is argued that both the University and the Company were established In part to enact the AIberta government's efforts to enhance Its powers within the Canadian federation (a process called province-building), The second phase is concerned with a more recent period of three years, 1993 - 95. By this time, province-building was not as significant a concern for policy-makers, and the organizational responses of the University and the Company reflected this shift. A divergence of practice is observed at the University and the Company, with actors at the Company encouraging the development of collectivist values for employees, while at the University no such overt strategy was followed, The study concludes that a consumerist model of education developed by the University in 1970 - 75 and expanded In 1993 - 95 contributed significantly to the institution's social origin and relative autonomy. The model was used as an Ideology in the earlier period and as a strategy In the later one, serving to forestall the institution's closure during both periods of crisis, though Ieading to ambiguous social outcomes. A consumerist model may on the one hand be progressive in that expanded access to educational opportunities is made possible. On the other hand, the consumerist model will tend increasingly to provide educational services to those social segments that already have access to educational opportunities.

International technology transfer:perceptions and reality of quality and reliability

Impressions about product quality and reliability can depend as much on perceptions about brands and country of origin as on data regarding performance and failure. This has implications for companies in developing countries that need to compete with importers. For manufacturers in industrialised countries it has implications for the value of transferred technologies. This article considers the issue of quality and reliability when technology is transferred between countries with different levels of development. It is based on UK and Chinese company case studies and questionnaire surveys undertaken among three company groups: UK manufacturers; Chinese manufacturers; Chinese users. Results show that all three groups recognise quality and reliability as important and support the premise that foreign technology based machines made in China carry a price premium over Chinese machines based on local technology. Closer examination reveals a number of important differences concerning the perceptions and reality of quality and reliability between the groups.

Development of a co-operative distributed process mining system for quality assurance

In this paper, a co-operative distributed process mining system (CDPMS) is developed to streamline the workflow along the supply chain in order to offer shorter delivery times, more flexibility and higher customer satisfaction with learning ability. The proposed system is equipped with the ‘distributed process mining’ feature which is used to discover the hidden relationships among each working decision in distributed manner. This method incorporates the concept of data mining and knowledge refinement into decision making process for ensuring ‘doing the right things’ within the workflow. An example of implementation is given, based on the case of slider manufacturer.

On the validity of subjective measures of company performance

Subjective measures of company performance are widely used in research and typically are interpreted as equivalent to objective measures. Yet, the assumption of equivalence is open to challenge. We compared the use of both types of measure in 3 separate samples. Findings were consistent in showing that: (a) subjective and objective measures of company performance were positively associated (convergent validity); (b) those relationships were stronger than those between measures of differing aspects of performance using the same method (discriminant validity); and (c) the relationships of subjective and objective company performance measures with a range of independent variables were equivalent (construct validity).

The manufacture and utilisation of architectural terracotta and faience.

The revival of terracotta and faience in British architecture was widespread, dramatic in its results and, for two decades, the subject of intense debate. However the materials have been frequently denigrated and more generally disregarded by both architects and historians. This study sets out to record and explain the rise and fall of interest in terracotta and faience, the extent and nature of the industry and the range of architectural usage in the Victorian, Edwardian and inter-war periods. The first two chapters record the faltering use of terracotta as an 'artificial stone', until the material gained its own identity, largely through the appreciation of Italian architecture. In the mid-Victorian period, terracotta will be seen to have become symbolic of the philosophy of the Victoria and Albert Museum and its Art School in attempting to reform both architecture and the decorative arts. The adoption of terracotta was furthered as much by industrial as aesthetic factors; three chapters examine how the exploitation of coal-measure clays, developments in the processes of manufacture, the changing motivation of industrialists and differing economics of production served to promote and then to hinder expansion and adaptation. The practical values of economy, durability and fire-resistance and the aesthetic potential, seen in terms of colour and decorative and sculptural modelling, became inter-related in the work of the architects who made extensive use of architectural ceramics. A correlation emerges between the free Gothic style, exemplified by the designs of Alfred Waterhouse and the use of red terracotta supplied from Ruabon, and between the eclectic Renaissance style and a buff material produced by different manufacturers.These patterns were modified as a result of the adoption of faience for facing external walls as well as interiors, and because of the new architectural requirements and tastes of the twentieth century. The general timidity in exploiting the scope for polychromatic decoration and the increasing opposition to architectural ceramics is contrasted with the most successful schemes produced for cinemas, chain-stores and factories. In the last chapter, those undertaken by the Hathern Station Brick and Terracotta Company between 1896 and 1939 are used as a case study; they confirm that manufacturers, architects and clients were all committed to creating a modern and yet decorative architecture, appropriate for new building types and that would appeal to and be comprehensible to the public.

Hierarchical classification of G-protein-coupled receptors with data-driven selection of attributes and classifiers

We address the important bioinformatics problem of predicting protein function from a protein's primary sequence. We consider the functional classification of G-Protein-Coupled Receptors (GPCRs), whose functions are specified in a class hierarchy. We tackle this task using a novel top-down hierarchical classification system where, for each node in the class hierarchy, the predictor attributes to be used in that node and the classifier to be applied to the selected attributes are chosen in a data-driven manner. Compared with a previous hierarchical classification system selecting classifiers only, our new system significantly reduced processing time without significantly sacrificing predictive accuracy.

The link between HR practices, psychological contract fulfillment, and organizational performance:the case of the Greek services sector

The purpose of this study is to investigate the impact of human resource (HR) practices on organizational performance through the mediating role of psychological contract (expressed by the influence of employer on employee promises fulfillment through employee attitudes). The study is based on a national sample of 78 organizations from the public and private services sector in Greece, including education, health, and banking, and on data obtained from 348 employees. The statistical method employed is structural equation modeling, via LISREL and bootstrapping estimation. The findings of the study suggest that employee incentives, performance appraisal, and employee promotion are three major HR practices that must be extensively employed. Furthermore, the study suggests that the organization must primarily keep its promises about a pleasant and safe working environment, respectful treatment, and feedback for performance, in order for employees to largely keep their own promises about showing loyalty to the organization, maintaining high levels of attendance, and upholding company reputation. Additionally, the study argues that the employee attitudes of motivation, satisfaction, and commitment constitute the nested epicenter mediating construct in both the HR practices–performance and employer–employee promise fulfillment relationships, resulting in superior organizational performance. © 2012 Wiley Periodicals, Inc.

Auto plant closures, policy responses and labour market outcomes:a comparison of MG Rover in the UK and Mitsubishi in Australia

This paper provides a preliminary comparative longitudinal analysis of the impact on workers made redundant due to the closure of the Mitsubishi plant in Adelaide and the MG Rover plant in Birmingham. Longitudinal surveys of ex-workers from both firms were undertaken over a 12-month period in order to assess the process of labour market adjustment. In the Mitsubishi case, given the skills shortage the state of Adelaide was facing, together with the considerable growth in mining and defence industries, it would have been more appropriate if policy intervention had been redirected to further training or re-skilling opportunities for redundant workers. This opportunity was effectively missed and as a result more workers left the workforce, most notably for retirement, than could have otherwise been the case. The MG Rover case was seen as a more successful example of policy intervention, with greater funding assistance available and targeted support available, and with more emphasis on re-training needs to assist adjustment. However, despite the assistance offered and the rhetoric of successful adjustment in both cases, the majority of workers have nevertheless experienced deterioration in their circumstances particularly in the Australian case where casual and part-time work were often the only work that could be obtained. Even in the UK case, where more funding assistance was offered, a majority of workers reported a decline in earnings and a rise in job insecurity. This suggests that a reliance on the flexible labour market is insufficient to promote adjustment, and that more active policy intervention is needed especially in regard to further up-skilling.

Task-based image annotation and retrieval

In order to address problems of information overload in digital imagery task domains we have developed an interactive approach to the capture and reuse of image context information. Our framework models different aspects of the relationship between images and domain tasks they support by monitoring the interactive manipulation and annotation of task-relevant imagery. The approach allows us to gauge a measure of a user's intentions as they complete goal-directed image tasks. As users analyze retrieved imagery their interactions are captured and an expert task context is dynamically constructed. This human expertise, proficiency, and knowledge can then be leveraged to support other users in carrying out similar domain tasks. We have applied our techniques to two multimedia retrieval applications for two different image domains, namely the geo-spatial and medical imagery domains. © Springer-Verlag Berlin Heidelberg 2007.