Non-stationary stochastic inventory lot-sizing with emission and service level constraints in a carbon cap-and-trade system

Firms worldwide are taking major initiatives to reduce the carbon footprint of their supply chains in response to the growing governmental and consumer pressures. In real life, these supply chains face stochastic and non-stationary demand but most of the studies on inventory lot-sizing problem with emission concerns consider deterministic demand. In this paper, we study the inventory lot-sizing problem under non-stationary stochastic demand condition with emission and cycle service level constraints considering carbon cap-and-trade regulatory mechanism. Using a mixed integer linear programming model, this paper aims to investigate the effects of emission parameters, product- and system-related features on the supply chain performance through extensive computational experiments to cover general type business settings and not a specific scenario. Results show that cycle service level and demand coefficient of variation have significant impacts on total cost and emission irrespective of level of demand variability while the impact of product's demand pattern is significant only at lower level of demand variability. Finally, results also show that increasing value of carbon price reduces total cost, total emission and total inventory and the scope of emission reduction by increasing carbon price is greater at higher levels of cycle service level and demand coefficient of variation. The analysis of results helps supply chain managers to take right decision in different demand and service level situations.

Architecture of remote monitoring and diagnosis system based on service-oriented architecture(SOA)

In view of the increasingly complexity of services logic and functional requirements, a new system architecture based on SOA was proposed for the equipment remote monitoring and diagnosis system. According to the design principles of SOA, different levels and different granularities of services logic and functional requirements for remote monitoring and diagnosis system were divided, and a loosely coupled web services system was built. The design and implementation schedule of core function modules for the proposed architecture were presented. A demo system was used to validate the feasibility of the proposed architecture.

Cloud adoption:prioritizing obstacles and obstacles resolution tactics using AHP

The enormous potential of cloud computing for improved and cost-effective service has generated unprecedented interest in its adoption. However, a potential cloud user faces numerous risks regarding service requirements, cost implications of failure and uncertainty about cloud providers' ability to meet service level agreements. These risks hinder the adoption of cloud. We extend the work on goal-oriented requirements engineering (GORE) and obstacles for informing the adoption process. We argue that obstacles prioritisation and their resolution is core to mitigating risks in the adoption process. We propose a novel systematic method for prioritising obstacles and their resolution tactics using Analytical Hierarchy Process (AHP). We provide an example to demonstrate the applicability and effectiveness of the approach. To assess the AHP choice of the resolution tactics we support the method by stability and sensitivity analysis. Copyright 2014 ACM.

The corporatization of community pharmacy:implications for service provision, the public health function, and pharmacy's claims to professional status in the United Kingdom

Background Pharmacy has experienced both incomplete professionalization and deprofessionalization. Since the late 1970s, a concerted attempt has been made to re-professionalize pharmacy in the United Kingdom (UK) through role extension—a key feature of which has been a drive for greater pharmacy involvement in public health. However, the continual corporatization of the UK community pharmacy sector may reduce the professional autonomy of pharmacists and may threaten to constrain attempts at reprofessionalization. Objectives The objectives of the research: to examine the public health activities of community pharmacists in the UK; to explore the attitudes of community pharmacists toward recent relevant UK policy and barriers to the development of their public health function; and, to investigate associations between activity, attitudes, and the type of community pharmacy worked in (eg, supermarket, chain, independent). Methods A self-completion postal questionnaire was sent to a random sample of practicing community pharmacists, stratified for country and sex, within Great Britain (n = 1998), with a follow-up to nonresponders 4 weeks later. Data were analyzed using SPSS (SPSS Inc., Chicago, IL, USA) (v12.0). A final response rate of 51% (n = 1023/1998) was achieved. Results The level of provision of emergency hormonal contraception on a patient group direction, supervised administration of medicines, and needle-exchange schemes was lower in supermarket pharmacies than in the other types of pharmacy. Respondents believed that supermarkets and the major multiple pharmacy chains held an advantageous position in terms of attracting financing for service development despite suggesting that the premises of such pharmacies may not be the most suitable for the provision of such services. Conclusions A mixed market in community pharmacy may be required to maintain a comprehensive range of pharmacy-based public health services and provide maximum benefit to all patients. Longitudinal monitoring is recommended to ensure that service provision is adequate across the pharmacy network.

Impact of denial of service solutions on network quality of service

The Internet has become a universal communication network tool. It has evolved from a platform that supports best-effort traffic to one that now carries different traffic types including those involving continuous media with quality of service (QoS) requirements. As more services are delivered over the Internet, we face increasing risk to their availability given that malicious attacks on those Internet services continue to increase. Several networks have witnessed denial of service (DoS) and distributed denial of service (DDoS) attacks over the past few years which have disrupted QoS of network services, thereby violating the Service Level Agreement (SLA) between the client and the Internet Service Provider (ISP). Hence DoS or DDoS attacks are major threats to network QoS. In this paper we survey techniques and solutions that have been deployed to thwart DoS and DDoS attacks and we evaluate them in terms of their impact on network QoS for Internet services. We also present vulnerabilities that can be exploited for QoS protocols and also affect QoS if exploited. In addition, we also highlight challenges that still need to be addressed to achieve end-to-end QoS with recently proposed DoS/DDoS solutions. © 2010 John Wiley & Sons, Ltd.

Determining inventory service support levels in multi-national companies

Multi-national manufacturing companies are often faced with very difficult decisions regarding where and how to cost effectively manufacture products in a global setting. Clearly, they must utilize efficient and responsive manufacturing strategies to reach low cost solutions, but they must also consider the impact of manufacturing and transportation solutions upon their ability to support sales. One important sales consideration is determining how much work in process, in-transit stock, and finished goods to have on hand to support sales at a desired service level. This paper addresses this important consideration through a comprehensive scenario-based simulation approach, including sensitivity analysis on key study parameters. Results indicate that the inventory needs vary considerably for different manufacturing and delivery methods in ways that may not be obvious when using common evaluative tools.

Design of a stock control methodology for use within an oil blending company

The thesis deals with the background, development and description of a mathematical stock control methodology for use within an oil and chemical blending company, where demand and replenishment lead-times are generally non-stationary. The stock control model proper relies on, as input, adaptive forecasts of demand determined for an economical forecast/replenishment period precalculated on an individual stock-item basis. The control procedure is principally that of the continuous review, reorder level type, where the reorder level and reorder quantity 'float', that is, each changes in accordance with changes in demand. Two versions of the Methodology are presented; a cost minimisation version and a service level version. Realising the importance of demand forecasts, four recognised variations of the Trigg and Leach adaptive forecasting routine are examined. A fifth variation, developed, is proposed as part of the stock control methodology. The results of testing the cost minimisation version of the Methodology with historical data, by means of a computerised simulation, are presented together with a description of the simulation used. The performance of the Methodology is in addition compared favourably to a rule-of-thumb approach considered by the Company as an interim solution for reducing stack levels. The contribution of the work to the field of scientific stock control is felt to be significant for the following reasons:- (I) The Methodology is designed specifically for use with non-stationary demand and for this reason alone appears to be unique. (2) The Methodology is unique in its approach and the cost-minimisation version is shown to work successfully with the demand data presented. (3) The Methodology and the thesis as a whole fill an important gap between complex mathematical stock control theory and practical application. A brief description of a computerised order processing/stock monitoring system, designed and implemented as a pre-requisite for the Methodology's practical operation, is presented as an appendix.

Differences between theoretical predictions and operational performance in a stock control application

Over the past decade, several experienced Operational Researchers have advanced the view that the theoretical aspects of model building have raced ahead of the ability of people to use them. Consequently, the impact of Operational Research on commercial organisations and the public sector is limited, and many systems fail to achieve their anticipated benefits in full. The primary objective of this study is to examine a complex interactive Stock Control system, and identify the reasons for the differences between the theoretical expectations and the operational performance. The methodology used is to hypothesise all the possible factors which could cause a divergence between theory and practice, and to evaluate numerically the effect each of these factors has on two main control indices - Service Level and Average Stock Value. Both analytical and empirical methods are used, and simulation is employed extensively. The factors are divided into two main categories for analysis - theoretical imperfections in the model, and the usage of the system by Buyers. No evidence could be found in the literature of any previous attempts to place the differences between theory and practice in a system in quantitative perspective nor, more specifically, to study the effects of Buyer/computer interaction in a Stock Control system. The study reveals that, in general, the human factors influencing performance are of a much higher order of magnitude than the theoretical factors, thus providing objective evidence to support the original premise. The most important finding is that, by judicious intervention into an automatic stock control algorithm, it is possible for Buyers to produce results which not only attain but surpass the algorithmic predictions. However, the complexity and behavioural recalcitrance of these systems are such that an innately numerate, enquiring type of Buyer needs to be inducted to realise the performance potential of the overall man/computer system.

A new inventory model for aircraft spares

A special inventory problem is presented: aircraft spares that are repaired and returned to spares, called rotable inventory. Rotable inventory is not consumed so does not change in the medium term, but is rotated through operational, maintenance and stock phases. The objective for inventory performance is fleet Service Level (SL), which effects aircraft dispatch performance. A model is proposed where the fleet SL drives combined stock levels such that cost is optimized. By holding greater numbers of lower-cost items and holding lower levels of more expensive items, it is possible to achieve substantial cost savings while maintaining performance. This approach is shown to be an advance over the current literature and is tested with case data, with conclusive results.

Exploring demand and production planning challenges in the food processing industry:a case study

This paper explores demand and production management challenges in the food processing industry. The goal is to identify the main production planning constraints and secondly to explore how each of these constraints affects company’s performance in terms of costs and customer service level. A single case study methodology was preferred since it enabled the collection of in-depth data. Findings suggest that product shelf life, carcass utilization and production lead time are the main constraints affecting supply chain efficiency and hence, a single planning approach is not appropriate when different products have different technological and processing characteristics.

A fuzzy AHP based integer linear programming model for the multi-criteria transshipment problem

Purpose – The purpose of this research is to develop a holistic approach to maximize the customer service level while minimizing the logistics cost by using an integrated multiple criteria decision making (MCDM) method for the contemporary transshipment problem. Unlike the prevalent optimization techniques, this paper proposes an integrated approach which considers both quantitative and qualitative factors in order to maximize the benefits of service deliverers and customers under uncertain environments. Design/methodology/approach – This paper proposes a fuzzy-based integer linear programming model, based on the existing literature and validated with an example case. The model integrates the developed fuzzy modification of the analytic hierarchy process (FAHP), and solves the multi-criteria transshipment problem. Findings – This paper provides several novel insights about how to transform a company from a cost-based model to a service-dominated model by using an integrated MCDM method. It suggests that the contemporary customer-driven supply chain remains and increases its competitiveness from two aspects: optimizing the cost and providing the best service simultaneously. Research limitations/implications – This research used one illustrative industry case to exemplify the developed method. Considering the generalization of the research findings and the complexity of the transshipment service network, more cases across multiple industries are necessary to further enhance the validity of the research output. Practical implications – The paper includes implications for the evaluation and selection of transshipment service suppliers, the construction of optimal transshipment network as well as managing the network. Originality/value – The major advantages of this generic approach are that both quantitative and qualitative factors under fuzzy environment are considered simultaneously and also the viewpoints of service deliverers and customers are focused. Therefore, it is believed that it is useful and applicable for the transshipment service network design.

Information and communication technology adoption in the Italian road freight haulage industry

Despite the importance of information and communication technology (ICT) in the management of transport and logistics systems, there is a shortage of studies in the road freight haulage sector. This paper is aimed at filling this void through an exploratory survey on ICT adoption and the influencing factors carried out in the Italian road transport market. The paper provides a review of the previous research on this topic that allows the identification of research gaps that have been addressed through a questionnaire survey. The findings provide evidence of a passive stance on ICT usage characterised by the adoption of isolated applications. The financial risk associated with technology investment and human resources are the main barriers to ICT adoption, while the improvement of service level and the reliability of transport operations emerge as stimulating factors. The results suggest that the potential benefits of technology have not been fully exploited and a risk-sensitive stance on ICT is evident preventing the full incorporation of ICT into business processes.

A branch and efficiency algorithm for the optimal design of supply chain networks

Supply chain operations directly affect service levels. Decision on amendment of facilities is generally decided based on overall cost, leaving out the efficiency of each unit. Decomposing the supply chain superstructure, efficiency analysis of the facilities (warehouses or distribution centers) that serve customers can be easily implemented. With the proposed algorithm, the selection of a facility is based on service level maximization and not just cost minimization as this analysis filters all the feasible solutions utilizing Data Envelopment Analysis (DEA) technique. Through multiple iterations, solutions are filtered via DEA and only the efficient ones are selected leading to cost minimization. In this work, the problem of optimal supply chain networks design is addressed based on a DEA based algorithm. A Branch and Efficiency (B&E) algorithm is deployed for the solution of this problem. Based on this DEA approach, each solution (potentially installed warehouse, plant etc) is treated as a Decision Making Unit, thus is characterized by inputs and outputs. The algorithm through additional constraints named “efficiency cuts”, selects only efficient solutions providing better objective function values. The applicability of the proposed algorithm is demonstrated through illustrative examples.

Computer based monitoring in U.K. service organizations : a comparative study

The majority of the literature about CBM is American in origin, and (inter alia) notes that there were differing uses of similar technology, indicating that context has an important role to play in the use of CBM. The literature maps the psychological effects of CBM in considerable detail, but only two published studies examine the context of CBM. These grounded results provide scant support for any systematic, quantitative, large scale analysis of computer based monitoring in the UK context. This thesis thus aims to systemically examine the context of CBM using discourse analysis. Forty four interviewees were theoretically sampled using a structured sample technique in four organizations. All were national or multinational enterprises. The interviews were semi structured in nature and divided into three sections. The first addressed the respondents' thoughts and perceptions about CBM, the second elicited talk about the departmental context (focusing the management - worker relationship), and the final section addressed the organizational context. The cases demonstrated variation in the use of CBM, measured according to the criteria of Westin (1987, 1988) and according to the interpretive repertoires used by the respondents in each case. Seven analytical categories of talk emerged from the data: three at the organizational level and four at the departmental level of analysis. Discourse analysis revealed two discrete interpretive repertories - the procedural and the substantive repertoires - in respondents' talk whose main variation occurred at the departmental level of analysis. Furthermore, patterns were found in the use of these repertories within cases and between categories. Between the cases, variation in the use of the repertories matched the between case variation according to the criteria of Westin. It would thus appear that the source of variation in the use of CBM lies in its context, more specifically in the relative emphasis of humanistic, interpersonal and idiosyncratic values within the management worker relationship.

A strategy formulation process for the delivery of technology enabled service delivery systems

The Product Service Systems, servitization, and Service Science literature continues to grow as organisations seek to protect and improve their competitive position. The potential of technology applications to deliver service delivery systems facilitated by the ability to make real time decisions based upon ‘in the field’ performance is also significant. Research identifies four key questions to be addressed. Namely: how far along the servitization continuum should the organisation go in a single strategic step? Does the organisation have the structure and infrastructure to support this transition? What level of condition monitoring should it employ? Is the product positioned correctly in the value chain to adopt condition monitoring technology? Strategy consists of three dimensions, namely content, context, and process. The literature relating to PSS, servitization, and strategy all discuss the concepts relative to content and context but none offer a process to deliver an aligned strategy to deliver a service delivery system enabled by condition based management. This paper presents a tested iterative strategy formulation methodology which is the result of a structured development programme.