Novel glucose sensor based on enzymeimmobilized 81° tilted fiber grating

We demonstrate a novel glucose sensor based on an optical fiber grating with an excessively tilted index fringe structure and its surface modified by glucose oxidase (GOD). The aminopropyltriethoxysilane (APTES) was utilized as binding site for the subsequent GOD immobilization. Confocal microscopy and fluorescence microscope were used to provide the assessment of the effectiveness in modifying the fiber surface. The resonance wavelength of the sensor exhibited red-shift after the binding of the APTES and GOD to the fiber surface and also in the glucose detection process. The red-shift of the resonance wavelength showed a good linear response to the glucose concentration with a sensitivity of 0.298nm(mg/ml)-1 in the very low concentration range of 0.0∼3.0mg/ml. Compared to the previously reported glucose sensor based on the GOD-immobilized long period grating (LPG), the 81° tilted fiber grating (81°-TFG) based sensor has shown a lower thermal cross-talk effect, better linearity and higher Q-factor in sensing response. In addition, its sensitivity for glucose concentration can be further improved by increasing the grating length and/or choosing a higher-order cladding mode for detection. Potentially, the proposed techniques based on 81°-TFG can be developed as sensitive, label free and micro-structural sensors for applications in food safety, disease diagnosis, clinical analysis and environmental monitoring.

Abrasion resistance of concrete

This thesis describes an experimental study of the abrasion resistance of concrete at both the macro and micro levels. This is preceded by a review related to friction and wear, methods of test for assessing abrasion resistance, and factors influencing the abrasion resistance of concrete. A versatile test apparatus was developed to assess the abrasion resistance of concrete. This could be operated in three modes and a standardised procedure was established for all tests. A laboratory programme was undertaken to investigate the influence, on abrasion resistance, of three major factors - finishing techniques, curing regimes and surface treatments. The results clearly show that abrasion resistance was significantly affected by these factors, and tentative mechanisms were postulated to explain these observations. To substantiate these mechanisms, the concrete specimens from the macro-study were subjected to micro-structural investigation, using such techniques as 'Mercury Intrusion Forosimetry, Microhardness, Scanning Electron Microscopy, Petrography and Differential Thermal Analysis. The results of this programme clearly demonstrated that the abrasion resistance of concrete is primarily dependent on the microstructure of the concrete nearest to the surface. The viability of indirectly assessing the abrasion resistance was investigated using three non-destructive techniques - Ultrasonic Pulse Velocity, Schmidt Rebound Hardness, and the Initial Surface Absorption Test. The Initial Surface Absorption was found to be most sensitive to factors which were shown to have influenced the abrasion resistance of concrete. An extensive field investigation was also undertaken. The results were used to compare site and laboratorypractices, and the performance in the accelerated abrasion test with the service wear. From this study, criteria were developed for assessing the quality of concrete floor slabs in terms of abrasion resistance.

Damping in zinc-based alloys

The damping behaviour of the cold chamber pressure-die-casting alloy: M3, ZA8, ZA27, ZM11, Cosmal, Supercosmal and newly developed ZA27H1 and ZA27H2 was investigated at room temperature and elevated temperatures of up to 90 degrees C. The damping properties of the alloys were established at all temperatures. Formulas were established to predict damping properties of each alloy at any given temperature. The prediction formulae were found to be very accurate. All of the experimental alloys were heterogenous with varying microstructure and grain size; this was the major contribution and dominated the damping properties of the alloys. Super cosmal and ZA27 possessed the highest tensile strength but ZA27H1, ZA27H2 and ZM11 showed the highest damping properties. The relationship between microstructure and damping capacity of all alloys was also examined using back-scattered electron on the SEM. Further more detailed examinations of the microstructures of alloys ZM11, Cosmal and Supercosmal were carried out on the transmission electron microscope in order to establish the phases present in all alloys. These helped to obtain the mechanism of damping in the experimental alloys. The main damping mechanism in most of the experimental alloys was due to grain-boundary-sliding. Micro structural examinations also revealed the absence of -phase in the Cosmal and Supercosmal. This was thought to be due to a change in solid solubility of the alloys, which could have been caused by the addition of Si.

Translation and peace:Arabic, English and Hebrew versions of Israeli-Palestinian peace initiatives

The present thesis examines Palestinian-Israeli peace initiatives as politically negotiated texts and their different Arabic, English and Hebrew language versions. Its aim is to make a contribution to a deeper understanding of the role of translation and recontextualization of politically negotiated texts in situations of ongoing contemporary conflict. In modern Translation Studies, although research exists on the translation of political texts following functional (e.g. Schäffner 2002) or systemic-linguistic (e.g. Calzada-Pérez 2001) approaches or applying narrative theory (Baker 2006), peace initiatives and politically negotiated texts are still a largely under-researched genre of political texts. The thesis – which takes 31 Arabic, English and Hebrew language versions of 5 different Palestinian-Israeli peace initiatives as its corpus – operates within the framework of product-oriented Descriptive Translation Studies (Lambert and Van Gorp 1985) and Critical Discourse Analysis (Fairclough 1992). For all of the peace initiatives analysed, there exist several language versions which were made available in different contexts by different institutions and for different readerships and purposes. The thesis pursues a top-down approach. It begins with presenting the socio-cultural and political contexts of the production of the original versions of the respective peace initiatives (the source texts) and their different language versions (target texts), focusing on their underlying functions and principles of audience design. It then moves to examine how the textual profiles of the language versions of peace initiatives reflect aspects of ideology, political affiliation and power relations at both the macro- and micro-structural levels. The final step is to account for these aspects in terms of socio-political and institutional conditions of the production of the translations. The overall textual analysis demonstrates that when translated, peace initiatives can be interpreted differently by different institutions in their attempt to promote their respective political interests and narratives. Also, it is very frequently that translations produced in one specific institutional context are recontextualised for use in another one. Such recontextualisation goes hand in hand with further textual amendments. To summarize, the thesis demonstrates how these translations – as products – are (re)framed and (re)contextualized in different institutional settings in order to serve different purposes. These texts, thus, play different roles in situations of ongoing contemporary conflict depending on the institutional context in which they are presented and the purposes they set to serve. These main findings make an original contribution to the discipline of Translation Studies in respect of emphasizing the need to study translations in their socio-political, historical and institutional contexts.

Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels

The effects of temperature on hydrogen assisted fatigue crack propagation are investigated in three steels in the low-to-medium strength range; a low alloy structural steel, a super duplex stainless steel, and a super ferritic stainless steel. Significant enhancement of crack growth rates is observed in hydrogen gas at atmospheric pressure in all three materials. Failure occurs via a mechanism of time independent, transgranular, cyclic cleavage over a frequency range of 0.1-5 Hz. Increasing the temperature in hydrogen up to 80°C markedly reduces the degree of embrittlement in the structural and super ferritic steels. No such effect is observed in the duplex stainless steel until the temperature exceeds 120°C. The temperature response may be understood by considering the interaction between absorbed hydrogen and micro-structural traps, which are generated in the zone of intense plastic deformation ahead of the fatigue crack tip. © 1992.

Ideological aspects of the translation of business annual reports in Oman (English-Arabic)

The socioeconomic context in the renaissance era in Oman has resulted in the development of new forms of discursive prastises and thus, in the introduction of new genres. One of these new genres is the business annual report, which in Oman exists in English and Arabic. This thesis examines the role of translation in the production of annual reports. This research makes a contribution to the field of Translation Studies by examining institutional translation in order to gain insights into translation agents, processes, practises and underlying policies with reference to national business institutions in their sociopolitical and historical and institutional contexts .Business reports are still largely under-researched as a genre in Translation Studies. The thesis starts with an overview of relevant aspects of Translation Studies to arrive at a theoretical framework which informs the analysis. The empirical analysis is based on sixty seven reports produced by different Oman-based companies which vary in size and organisational patterns. Annual reports are characterised as a genre in terms of function and structure at the macro-level as well as the micro-level. They have an informative and a persuasive function, as they are produced by different companies in their attempt to promote and fulfil their respective business interests and objectives.The thesis presents the sociocultural and political contexts of the production of the English and Arabic versions of the annual reports, focusing on the underlying functions and principles of institutions and agents. The next chapter illustrates the textual profiles of the English and the Arabic versions, identifying typical translation strategies. The discussion here operates within the framework of product-oriented Descriptive Translation Studies (Lambert and van Gorp 1985). It is argued that the two language versions reflect aspects of ideology, political affiliation and power relations at both the macro and micro- structural levels. These ideological aspects can be seen in particular in the addition, omission and change of specific expressions which refer to religious or interpersonal aspects. These strategies signal the aim to appeal to wider Arab readers and to fulfil the agendas of different agents (government, companies, chairpersons, directors, etc.). The description of the texts is followed by an account of these aspects in terms of sociopolitical and institutional conditions in the production of the translations. For this explanation, reference is made to sociological approaches to translation, mainly building on the work of Bourdieu (1991). This thesis emphasises that the translation of annual reports is a collective effort which takes place in a particular institutional context. Consequently, the translation strategies are regulated by the objectives of the institution within which translators and other agents operate. The translations are prepared in order to meet the expectations and needs of the intended Arabic language addressees; in addition, the generic features of the reports reveal a progression of transmission and development over the course of time in the spheres of business and economy in Oman. This thesis demonstrates that business companies too can be seen as institutions which contribute significantly to disseminating business terms and concepts and promoting investment opportunities domestically and internationally through translation work.

An exploratory study to determine applicability of nano-hardness and micro-compression measurements for yield stress estimation

The superior properties of ferritic/martensitic steels in a radiation environment (low swelling, low activation under irradiation and good corrosion resistance) make them good candidates for structural parts in future reactors and spallation sources. While it cannot substitute for true reactor experiments, irradiation by charged particles from accelerators can reduce the number of reactor experiments and support fundamental research for a better understanding of radiation effects in materials. Based on the nature of low energy accelerator experiments, only a small volume of material can be uniformly irradiated. Micro and nanoscale post irradiation tests thus have to be performed. We show here that nanoindentation and micro-compression testing on T91 and HT-9 stainless steel before and after ion irradiation are useful methods to evaluate the radiation induced hardening.

An appraisal of employment problems and policies at the micro-economic level

This study has concentrated on the development of an impact simulation model for use at the sub-national level. The necessity for the development of this model was demonstrated by the growth of local economic initiatives during the 1970's, and the lack of monitoring and evaluation exercise to assess their success and cost-effectiveness. The first stage of research involved the confirmation that the potential for micro-economic and spatial initiatives existed. This was done by identifying the existence of involuntary structural unemployment. The second stage examined the range of employment policy options from the macroeconomic, micro-economic and spatial perspectives, and focused on the need for evaluation of those policies. The need for spatial impact evaluation exercise in respect of other exogenous shocks, and structural changes was also recognised. The final stage involved the investigation of current techniques of evaluation and their adaptation for the purpose in hand. This led to a recognition of a gap in the armoury of techniques. The employment-dependency model has been developed to fill that gap, providing a low-budget model, capable of implementation at the small area level and generating a vast array of industrially disaggregate data, in terms of employment, employment-income, profits, value-added and gross income, related to levels of United Kingdom final demand. Thus providing scope for a variety of impact simulation exercises.

Structural limits and teachers' perspectives

This thesis is about the relationship between schooling and the economic and political structures which constrain its institutional framework. It focusses on teachers, as mediators of structural constraints, and on middle schools, as institutions which occupy a functionally transitional place between the primary and secondary traditions. In approaching the problem of linking the different perspectives of macro and micro sociologies, I argue the view that the individual mediates the contradictions between the socially cooperative processes of production and the competitive individualism which legitimates the private appropriation of wealth and income. The link is observable in the schooling process as a pattern of contradictions and tensions mediated by the rhetoric of equality of opportunity. In order to elucidate the link, the processes within the boundaried institutions must be viewed in the context of those changing tensions within the state administrative systems, which reverberate into schools as economic and political constraints. Framed within the ideology of the Flowden Report (1967), middle schooling was set within a discourse which stressed cooperative relationships rather than competitive standards. Since the mid-1970s, administrative policies have heightened the competitive battle for declining resources and attacked the Plowden ideology. Focussing the fieldwork on six middle schools in one local authority, T use an eclectic methodology to relate economic and political policies, generated in the state administrative system, to the situation in the schools between 1979 and 1981. The methodology incorporates a time dimension in order to highlight the tensions as they play upon teachers' changing definitions of the changing situation. I conclude that the intersubjective socio-cultural relations of schooling cannot be properly explained without making explicit the changing tensions in the rule/resource relationships which teachers mediate through their particular institutions.

Structural characterization of titanium-doped Bioglass using isotopic substitution neutron diffraction

Melt quenched silicate glasses containing calcium, phosphorus and alkali metals have the ability to promote bone regeneration and to fuse to living bone. Of these glasses 45S5 Bioglass® is the most widely used being sold in over 35 countries as a bone graft product for medical and dental applications; particulate 45S5 is also incorporated into toothpastes to help remineralize the surface of teeth. Recently it has been suggested that adding titanium dioxide can increase the bioactivity of these materials. This work investigates the structural consequences of incorporating 4 mol% TiO2 into Bioglass® using isotopic substitution (of the Ti) applied to neutron diffraction and X-ray Absorption Near Edge Structure (XANES). We present the first isotopic substitution data applied to melt quench derived Bioglass or its derivatives. Results show that titanium is on average surrounded by 5.2(1) nearest neighbor oxygen atoms. This implies an upper limit of 40% four-fold coordinated titanium and shows that the network connectivity is reduced from 2.11 to 1.97 for small quantities of titanium. Titanium XANES micro-fluorescence confirms the titanium environment is homogenous on the micron length scale within these glasses. Solid state magic angle spinning (MAS) NMR confirms the network connectivity model proposed. Furthermore, the results show the intermediate range order containing Na-O, Ca-O, O-P-O and O-Si-O correlations are unaffected by the addition of small quantities of TiO2 into these systems.

Control of the properties of micro-structured waveguides in lithium niobate crystal

We study numerically depressed-cladding, buried waveguides that can be formed in a lithium niobate crystal by femtosecond laser writing. We demonstrate that the guiding properties can be controlled by the waveguide structural characteristics.