Knowledge maintenance and the frame problem

Knowledge maintenance is a major challenge for both knowledge management and the Semantic Web. Operating over the Semantic Web, there will be a network of collaborating agents, each with their own ontologies or knowledge bases. Change in the knowledge state of one agent may need to be propagated across a number of agents and their associated ontologies. The challenge is to decide how to propagate a change of knowledge state. The effects of a change in knowledge state cannot be known in advance, and so an agent cannot know who should be informed unless it adopts a simple ‘tell everyone – everything’ strategy. This situation is highly reminiscent of the classic Frame Problem in AI. We argue that for agent-based technologies to succeed, far greater attention must be given to creating an appropriate model for knowledge update. In a closed system, simple strategies are possible (e.g. ‘sleeping dog’ or ‘cheap test’ or even complete checking). However, in an open system where cause and effect are unpredictable, a coherent cost-benefit based model of agent interaction is essential. Otherwise, the effectiveness of every act of knowledge update/maintenance is brought into question.

Using HLT for acquiring, retrieving and publishing knowledge in AKT:position paper

AKT is a major research project applying a variety of technologies to knowledge management. Knowledge is a dynamic, ubiquitous resource, which is to be found equally in an expert's head, under terabytes of data, or explicitly stated in manuals. AKT will extend knowledge management technologies to exploit the potential of the semantic web, covering the use of knowledge over its entire lifecycle, from acquisition to maintenance and deletion. In this paper we discuss how HLT will be used in AKT and how the use of HLT will affect different areas of KM, such as knowledge acquisition, retrieval and publishing.

Reconstructing the past? Low German and the creating of regional identity in public language display

This article deals with language contact between a dominant standard language -German - and a lesser-used variety - Low German - in a situation in which the minoritised language is threatened by language shift and language loss. It analyses the application of Low German in forms of public language display and the selfpresentation of the community in tourism brochures, focusing on bilingual linguistic practices on the one hand and on underlying discourses on the other. It reveals that top-down and bottom-up approaches to implementing Low German in public language display show a remarkable homogeneity, thus creating a regional 'brand'. The article asks whether a raised level of visibility will in itself guarantee better chances for linguistic maintenance and survival of the threatened language. © 2011 Taylor & Francis.

Bilingualism and educational achievement:a study of young bilinguals in Birmingham schools and colleges

This study aimed firstly to investigate current patterns of language use amongst young bilinguals in Birmingham and secondly to examine the relationship between this language use and educational achievement. The research then focussed on various practices, customs and attitudes which would favour the attrition or survival of minority languages in the British situation. The data necessary to address this question was provided by a sample of three hundred and seventy-four 16-19 year olds, studying in Birmingham schools and colleges during the period 1987-1990 and drawn from the main linguistic minority communities in Birmingham. The research methods chosen were both quantitative and qualitative. The study found evidence of ethnolinguistic vitality amongst many of the linguistic minority communities in Birmingham: a number of practices and a range of attitudes indicate that linguistic diversity may continue and that a stable diglossic situation may develop in some instances, particularly where demographical and religious factors lead to closeness of association. Where language attrition is occurring it is often because of the move from a less prestigious minority language or dialect to a more prestigious minority language in addition to pressures from English. The educational experience of the sample indicates that literacy and formal language study are of key importance if personal bilingualism is to be experienced as an asset; high levels of oral proficiency in the L1 and L2 do not, on their own, necessarily correlate with positive educational benefit. The intervening variable associated with educational achievement appears to be the formal language learning process and literacy. A number of attitudes and practices, including the very close associations maintained with some of the countries of origin of the families, were seen to aid or hinder first language maintenance and second language acquisition.

The appraisal and management of multi-storey dwelling blocks using large concrete panel systems

This exploratory study is concerned with the integrated appraisal of multi-storey dwelling blocks which incorporate large concrete panel systems (LPS). The first step was to look at U.K. multi-storey dwelling stock in general, and under the management of Birmingham City Council in particular. The information has been taken from the databases of three departments in the City of Birmingham, and rearranged in a new database using a suite of PC software called `PROXIMA' for clarity and analysis. One hundred of their stock were built large concrete panel system. Thirteen LPS blocks were chosen for the purpose of this study as case-studies depending mainly on the height and age factors of the block. A new integrated appraisal technique has been created for the LPS dwelling blocks, which takes into account the most physical and social factors affecting the condition and acceptability of these blocks. This appraisal technique is built up in a hierarchical form moving from the general approach to particular elements (a tree model). It comprises two main approaches; physical and social. In the physical approach, the building is viewed as a series of manageable elements and sub-elements to cover every single physical or environmental factor of the block, in which the condition of the block is analysed. A quality score system has been developed which depends mainly on the qualitative and quantitative conditions of each category in the appraisal tree model, and leads to physical ranking order of the study blocks. In the social appraisal approach, the residents' satisfaction and attitude toward their multi-storey dwelling block was analysed in relation to: a. biographical and housing related characteristics; and b. social, physical and environmental factors associated with this sort of dwelling, block and estate in general.The random sample consisted of 268 residents living in the 13 case study blocks. Data collected was analysed using frequency counts, percentages, means, standard deviations, Kendall's tue, r-correlation coefficients, t-test, analysis of variance (ANOVA) and multiple regression analysis. The analysis showed a marginally positive satisfaction and attitude towards living in the block. The five most significant factors associated with the residents' satisfaction and attitude in descending order were: the estate, in general; the service categories in the block, including heating system and lift services; vandalism; the neighbours; and the security system of the block. An important attribute of this method, is that it is relatively inexpensive to implement, especially when compared to alternatives adopted by some local authorities and the BRE. It is designed to save time, money and effort, to aid decision making, and to provide ranked priority to the multi-storey dwelling stock, in addition to many other advantages. A series of solution options to the problems of the block was sought for selection and testing before implementation. The traditional solutions have usually resulted in either demolition or costly physical maintenance and social improvement of the blocks. However, a new solution has now emerged, which is particularly suited to structurally sound units. The solution of `re-cycling' might incorporate the reuse of an entire block or part of it, by removing panels, slabs and so forth from the upper floors in order to reconstruct them as low-rise accommodations.

Evaluating and developing project-based learning:an empirical approach to evaluating CDIO

As a global profession, engineering is integral to the maintenance and further development of society. Indeed, contemporary social problems requiring engineering solutions are not only a consequence of natural and ‘manmade’ disasters (such as the Japanese earthquake or the oil leakage in the Gulf of Mexico) but also encapsulate 21st Century dilemmas around sustainability, poverty and pollution [2,6,7]. Given the complexity of such problems and the constant need for innovation, the demand for engineering education to provide a ready supply of suitably qualified engineering graduates, able to make innovative decisions has never been higher [3,5]. Bearing this in mind, and taking account problems of attrition in engineering education [1,6,4] innovation in the way in which the curriculum is developed and delivered is crucial. CDIO [Conceive, Design, Implement, Operate] provides a potentially ground-breaking solution to such dilemmas. Aimed at equipping students with practical engineering skills supported by the necessary theoretical background, CDIO could potentially change the way engineering is perceived and experienced within higher education. Aston University introduced CDIO into its Mechanical Engineering and Design programmes in October 2011. From its induction, engineering education researchers have ‘shadowed’ the staff responsible for developing and teaching the programme. Utilising an Action Research Design, and adopting a mixed methodological research design, the researchers have worked closely with the teaching team to critically reflect on the processes involved in introducing CDIO into the curriculum. Concurrently, research has been conducted to capture students’ perspectives of CDIO. In evaluating the introduction of CDIO at Aston, the researchers have developed a distinctive research strategy with which to evaluate CDIO. It is the emergent findings from this research that form the basis of this paper. Although early-on in its development CDIO is making a significant difference to engineering education at the University. The paper draws attention to pedagogical, practical and professional issues – discussing each one in turn and in doing so critically analysing the value of CDIO from academic, student and industrial perspectives. The paper concludes by noting that whilst CDIO represents a forwardthinking approach to engineering education, the need for constant innovation in learning and teaching should not be forgotten. Indeed, engineering education needs to put itself at the forefront of pedagogic practice. Providing all-rounded engineers, ready to take on the challenges of the 21st Century!

Foreign direct investment and employment in Central Europe

This article investigates the effects of foreign direct investment on employment generation in Central Europe. Foreign affiliates operate as a buffer to reductions in overall employment and show significant cross-country differences. A model analyzing the contribution of foreign direct investment to restructuring is developed. This model helps interpret the empirical evidence on the link between foreign direct investment and employment in Central Europe. Increasing differentiation in employment between manufacturing industries dominated by foreign affiliates suggests the importance of diversified sources of foreign direct investment for employment generation and preservation. A disaggregate analysis indeed reveals a much more complex and differentiated role of foreign direct investment in employment preservation, employment generation and structural change than the aggregate picture would suggest. This diversity has important policy implications for attracting and upgrading foreign direct investment.

Molecular and genetic evidence for abnormalities in the nodes of Ranvier in schizophrenia

Context: Genetic, neuroimaging, and molecular neurobiological evidence support the hypothesis that the disconnectivity syndrome in schizophrenia (SZ) could arise from failures of saltatory conduction and abnormalities at the nodes of Ranvier (NOR) interface where myelin and axons interact. Objective: To identify abnormalities in the expression of oligodendroglial genes and proteins that participate in the formation, maintenance, and integrity of the NOR in SZ. Design: The messenger RNA (mRNA) expression levels of multiple NOR genes were quantified in 2 independent postmortem brain cohorts of individuals with SZ, and generalizability to protein expression was confirmed. The effect of the ANK3 genotype on the mRNA expression level was tested in postmortem human brain. Case-control analysis tested the association of the ANK3 genotype with SZ. The ANK3 genotype's influence on cognitive task performance and functional magnetic resonance imaging activation was tested in 2 independent cohorts of healthy individuals. Setting: Research hospital. Patients: Postmortem samples from patients with SZ and healthy controls were used for the brain expression study (n=46) and the case-control analysis (n=272). Healthy white men and women participated in the cognitive (n=513) and neuroimaging (n=52) studies. Main Outcome Measures: The mRNA and protein levels in postmortem brain samples, genetic association with schizophrenia, cognitive performance, and blood oxygenation level-dependent functional magnetic resonance imaging. Results: The mRNA expression of multiple NOR genes was decreased in schizophrenia. The ANK3 rs9804190 C allele was associated with lower ANK3 mRNA expression levels, higher risk for SZ in the case-control cohort, and poorer working memory and executive function performance and increased prefrontal activation during a working memory task in healthy individuals. Conclusions: These results point to abnormalities in the expression of genes and protein associated with the integrity of the NOR and suggest them as substrates for the disconnectivity syndrome in SZ. The association of ANK3 with lower brain mRNA expression levels implicates a molecular mechanism for its genetic, clinical, and cognitive associations with SZ. ©2012 American Medical Association. All rights reserved.

Can an episodic approach to social identification account for identification as interaction between individual and collective identity work in an increasingly flexible and transient identity formation context?

A review of available literature suggests that social identification exists at the interface between individual and collective identity work. This poster proposes that it is the interaction between these two processes that leads a person to define themselves in terms of their membership of a particular social group. The poster suggests that identity work undertaken by the group (or ‘the creation of identities as widely understood signs with a set of rules and conventions for their use’, Schwalbe & Mason-Schrock, 1996, p.115), can be used by a person to inform their own individual identity work and, from this, the extent of alignment between their identity and the perceived identity of the group. In stable or internally-structured groups collective identity work may simply take the form of communication and preservation of dominant collective identities. However, in unstable, new or transitional groups, interaction between individual and collective identity work may be more dynamic, as both collective and individual identities are simultaneously codified, enacted and refined. To develop an understanding of social identification that is applicable in both stable and transitional social groups, it is useful to consider recent proposals that identification may occur cyclically as a series of discrete episodes (Ashforth, Harrison & Corley, 2008). This poster draws on the literature to present these suggestions in greater detail, outlining propositions for social identification that are relevant to transient as well as stable identity formation, supported by suggestion of how episodes of social identification may lead to a person identifying with a group.

Total productive maintenance implementation in the newspaper printing industry:an action research approach

The objective of Total Productive Maintenance (TPM) is to maximise plant and equipment effectiveness, to create a sense of ownership for operators, and promote continuous improvement through small group activities involving production, engineering and maintenance personnel. This paper describes and analyses a case study of TPM implementation at a newspaper printing house in Singapore. However, rather than adopting more conventional implementation methods such as employing consultants or through a project using external training, a unique approach was adopted based on Action Research using a spiral of cycles of planning, acting observing and reflecting. An Action Research team of company personnel was specially formed to undertake the necessary fieldwork. The team subsequently assisted with administering the resulting action plan. The main sources of maintenance and operational data were from interviews with shop floor workers, participative observation and reviews conducted with members of the team. Content analysis using appropriate statistical techniques was used to test the significance of changes in performance between the start and completion of the TPM programme. The paper identifies the characteristics associated with the Action Research method when used to implement TPM and discusses the applicability of the approach in related industries and processes.

Effectiveness of the interventions in preventing the progression of pre-frailty and frailty in older adults:a systematic review protocol

REVIEW QUESTION / OBJECTIVE : The objective of this review is to identify the effectiveness of the interventions in preventing progression of pre-frailty and frailty in older adults. More specifically, the review questions are: - What is the effectiveness of interventions in preventing or reducing frailty in older adults? - How does effectiveness vary with degree of frailty? - Are there factors that influence the effectiveness of interventions? - What is the economic feasibility of interventions for pre-frailty and frailty? INCLUSION CRITERIA : Types of participants This review will consider studies that include older adults (female and male) aged 65 years and over, explicitly identified as pre-frail or frail by the researchers or associated medical professionals according to a pre-specified scale or index, and who have received health care and support services in any type of setting (primary care, nursing homes, hospitals). This review will exclude studies that: - Include participants who have been selected because they have one specific illness - Consider people with a terminal diagnosis only. - Types of intervention(s)/phenomena of interest: The clinical/medical component of the review will consider studies that evaluate any type of interventions to prevent the progression of pre-frailty and frailty in older adults. These interventions will include, but will not be limited to, physical activity, multifactorial intervention, psychosocial intervention, health and social care provision, and cognitive, nutrition or medication/medical maintenance and adherence focused interventions. The economic component of the review will consider studies that have performed any type of health economic analysis of ...

Solar stills:a comprehensive review of designs, performance and material advances

The demand for fresh water production is growing day by day with the increase in world population and with industrial growth. Use of desalination technology is increasing to meet this demand. Among desalination technologies, solar stills require low maintenance and are readily affordable; however their productivity is limited. This paper aims to give a detailed review about the various types of solar stills, covering passive and active designs, single- and multi-effect types, and the various modifications for improved productivity including reflectors, heat storage, fins, collectors, condensers, and mechanisms for enhancing heat and mass transfer. Photovoltaic-thermal and greenhouse type solar stills are also covered. Material advances in the area of phase change materials and nanocomposites are very promising to enhance further performance; future research should be carried out in these and other areas for the greater uptake of solar still technology.