Coherence and anticoherence resonance in high-concentration erbium-doped fiber laser

We report an experimental study of low-frequency (~10 kHz) self-pulsing of the output intensity in a high- concentration erbium-doped fiber laser. We suggest that the fast intensity fluctuations caused by multimode and polarization instabilities play the role of an external noise source, leading to low-frequency auto-oscillations through a coherence resonance scenario.

Upconversion assisted self-pulsing in a high-concentration erbium doped fiber laser

We report results on experimental and theoretical characterisation of self-pulsing in high concentration erbium doped fibre laser which is free from erbium clusters. Unlike previous models of self-pulsing accounting for pair-induced quenching (PIQ) on the clustered erbium ions, new model has been developed with accounting for statistical nature of the excitation migration and upconversion and resonance-like pumpto-signal intensity noise transfer. The obtained results are in a good agreement with the experimental data.

Gender and autistic personality traits predict perspective-taking ability in typical adults

Adopting another’s visual perspective is exceedingly common and may underlie successful social interaction and empathizing with others. The individual differences responsible for success in perspective-taking, however, remain relatively undiscovered. We assessed whether gender and autistic personality traits in normal college student adults predict the ability to adopt another’s visual perspective. In a task differentially recruiting VPT-1 which involves following another’s line of sight, and VPT-2 which involves determining how another may perceive an object differently given their unique perspective (VPT-2), we found effects of both gender and autistic personality traits. Specifically, we demonstrate slowed VPT-2 but not VPT-1 performance in males and females with relatively high ASD-characteristic personality traits; this effect, however was markedly stronger in males than females. Results contribute to knowledge regarding ASD-related personality traits in the general population and the individual differences modulating perspective-taking abilities.

Implications of high power losses in IR femtosecond laser inscribed fibre Bragg gratings

We report on high power issues related to the reliability of fibre Bragg gratings inscribed with an infrared femtosecond laser using the point-by-point writing method. Conventionally, fibre Bragg gratings have usually been written in fibres using ultraviolet light, either holographically or using a phase mask. Since the coating is highly absorbing in the UV, this process normally requires that the protective polymer coating is stripped prior to inscription, with the fibre then being recoated. This results in a time consuming fabrication process that, unless great care is taken, can lead to fibre strength degradation, due to the presence of surface damage. The recent development of FBG inscription using NIR femtosecond lasers has eliminated the requirement for the stripping of the coating. At the same time the ability to write gratings point-by-point offers the potential for great flexibility in the grating design. There is, however, a requirement for reliability testing of these gratings, particularly for use in telecommunications systems where high powers are increasingly being used in long-haul transmission systems making use of Raman amplification. We report on a study of such gratings which has revealed the presence of broad spectrum power losses. When high powers are used, even at wavelengths far removed from the Bragg condition, these losses produce an increase in the fibre temperature due to absorption in the coating. We have monitored this temperature rise using the wavelength shift in the grating itself. At power levels of a few watts, various temperature increases were experienced ranging from a few degrees up to the point where the buffer completely melts off the fibre at the grating site. Further investigations are currently under way to study the optical loss mechanisms in order to optimise the inscription mechanism and minimise such losses.

Producing facial composite sketches in remote cognitive interviews:a preliminary investigation

Justice systems around the world are increasingly turning to videoconferencing as a means to reduce delays and reduce costs in legal processes. This preliminary research examined whether interviewing a witness remotely - without physical co-presence of the witness and interviewer - could facilitate the production of quality facial composite sketches of suspects. In Study 1, 42 adults briefly viewed a photograph of a face. The next day they participated in Cognitive Interviews with a forensic artist, conducted either face-to-face or remotely via videoconference. In Study 2, 20 adults participated in videoconferenced interviews, and we manipulated the method by which they viewed the developing sketch. In both studies, independent groups of volunteers rated the likeness of the composites to the original photographs. The data suggest that remote interviews elicited effective composites; however, in Study 1 these composites were considered poorer matches to the photographs than were those produced in face-to-face interviews. The differences were small, but significant. Participants perceived several disadvantages to remote interviewing, but also several advantages including less pressure and better concentration. The results of Study 2 suggested that different sketch presentation methods offered different benefits. We propose that remote interviewing could be a useful tool for investigators in certain circumstances. © 2013 Taylor & Francis.

On-off and multistate intermittencies in cascaded random distributed feedback fibre laser

A range of physical and engineering systems exhibit an irregular complex dynamics featuring alternation of quiet and burst time intervals called the intermittency. The intermittent dynamics most popular in laser science is the on-off intermittency [1]. The on-off intermittency can be understood as a conversion of the noise in a system close to an instability threshold into effective time-dependent fluctuations which result in the alternation of stable and unstable periods. The on-off intermittency has been recently demonstrated in semiconductor, Erbium doped and Raman lasers [2-5]. Recently demonstrated random distributed feedback (random DFB) fiber laser has an irregular dynamics near the generation threshold [6,7]. Here we show the intermittency in the cascaded random DFB fiber laser. We study intensity fluctuations in a random DFB fiber laser based on nitrogen doped fiber. The laser generates first and second Stokes components 1120 nm and 1180 nm respectively under an appropriate pumping. We study the intermittency in the radiation of the second Stokes wave. The typical time trace near the generation threshold of the second Stokes wave (Pth) is shown at Fig. 1a. From the number of long enough time-traces we calculate statistical distribution between major spikes in time dynamics, Fig. 1b. To eliminate contribution of high frequency components of spikes we use a low pass filter along with the reference value of the output power. Experimental data is fitted by power law, ~(P-Pth)y, where is a mean time between pikes. There are two different intermittency regimes. Just above Pth, the mean time is approximated by the -3/2 power law. The -3/2 power law is typical to the on-off intermittency with hopping between two states (first and second Stokes waves in our case) [7]. At higher power, the mean time is approximated by -4 power law, that indicates a change in intermittency type to multistate. Multistable dynamics is observed in erbium-doped fiber lasers [8]. The origin of multiples states in our system could be probably connected with polarization hopping or other reasons and should be further investigated. We have presented a first experimental statistical characterisation of the on-off and multistate intermittencies that occur in the generation of the second Stokes wave in nitrogen doped random DFB fiber laser. References [1] H. Fujisaka and T. Yamada, “A New Intermittency in Coupled Dynamical Systems,” Prog. Theor. Phys. 74, 918 (1985). [2] S. Osborne, A. Amann, D. Bitauld, and S. O’Brien, “On-off intermittency in an optically injected semiconductor laser,” Phys. Rev. E 85, 056204 (2012). [3] S. Sergeyev, K. O'Mahoney, S. Popov, and A. T. Friberg, “Coherence and anticoherence resonance in high-concentration erbium-doped fiber laser,” Opt. Lett. 35, 3736 (2010). [4] A.E. El-Taher, S.V. Sergeyev, E.G. Turitsyna, P. Harper, and S. K. Turitsyn, “Intermittent Self-Pulsing in a Fiber Raman Laser”, In proc. Conf. Nonlin. Photon., paper ID 1367139, Colorado Springs, USA, 2012 [5] S.K. Turitsyn, S.A. Babin, A.E. El-Taher, P. Harper, D.V. Churkin, S.I. Kablukov, J.D. Ania-Castañón, V. Karalekas, and E.V. Podivilov, “Random distributed feedback fibre laser”, Nat. Photon..4, 231 (2010). [6] I. D. Vatnik, D. V. Churkin, S. A. Babin, and S. K. Turitsyn, "Cascaded random distributed feedback Raman fiber laser operating at 1.2 μm," Opt. Express 19, 18486 (2011). [7] W. Feller, An introduction to probability theory and its applications, Vol. 1, 3rd ed. (Wiley, New-York, 1968). [8] G. Huerta-Cuellar, A.N. Pisarchik, and Y.O. Barmenkov, “Experimental characterization of hopping dynamics in a multistable fiber laser,” Phys. Rev. E 78, 035202(R) (2008).

Identifying frames:a comparison of research methods

Framing plays an important role in public policy. Interest groups strategically highlight some aspects of a policy proposal while downplaying others in order to steer the policy debate in a favorable direction. Despite the importance of framing, we still know relatively little about the framing strategies of interest groups due to methodological difficulties that have prevented scholars from systematically studying interest group framing across a large number of interest groups and multiple policy debates. This article therefore provides an overview of three novel research methods that allow researchers to systematically measure interest group frames. More specifically, this article introduces a word-based quantitative text analysis technique, a manual, computer-assisted content analysis approach and face-to-face interviews designed to systematically identify interest group frames. The results generated by all three techniques are compared on the basis of a case study of interest group framing in an environmental policy debate in the European Union.