Some studies relating to the design of shallow, fluidized bed boilers

The concept of shallow fluidized bed boilers is defined and a preliminary working design for a gas-fired package boiler has been produced. Those areas of the design requiring further study have been specified. Experimental investigations concerning these areas have been carried out. A two-dimensional, conducting paper analog has been developed for the specific purpose of evaluating sheet fins. The analog has been generalised and is presented as a simple means of simulating the general, two-dimensional Helmholtz equation. By recording the transient response of spherical, calorimetric probes when plunged into heated air-fluidized beds, heat transfer coefficients have been measured at bed temperatures up to 1 100°C. A correlation fitting all the data to within ±10% has been obtained. A model of heat transfer to surfaces immersed in high temperature beds has been proposed. The model solutions are, however, only in qualitative agreement with the experimental data. A simple experimental investigation has revealed that the effective, radial, thermal conductivities of shallow fluidized beds are an order of magnitude lower than the axial conductivities. These must, consequently, be taken into account when considering heat transfer to surfaces immersed within fluidized beds. Preliminary work on pre-mixed gas combustion and some further qualitative experiments have been used as the basis for discussing the feasibility of combusting heavy fuel oils within shallow beds. The use of binary beds, within which the fuel could be both gasified and subsequently burnt, is proposed. Finally, the consequences of the experimental studies on the initial design are considered, and suggestions for further work are made.

Towards an operations strategy for the infusion of product-centric services into manufacturing:service systems implementation

The work in this chapter is concerned with product-centric servitization. This is where a portfolio of services are formed and integrated to support product availability and use. Such servitization can be a valuable source of revenue for a manufacturer, yet little attention has been given to the configuration of the wider operations strategy that needs to be in place to deliver integrated products and services successfully. Therefore, the purpose of this chapter is to put forward a generic set of characteristics for such operations. Our intention is that these characteristics will be valuable to practitioners contemplating sophisticated forms of servitization, as they suggest the likely and significant changes that will be needed to the operations strategy of a conventional manufacturing organisation.

Ontology-based pathways generation for biomass to bioenergy conversion

Bio energy is a renewable energy and a solution to the depleting fossil fuels. Bio energy such as heat, power and bio fuel is generated by conversion technologies using biomass for example domestic waste, root crops, forest residue and animal slurry. Pyrolysis, anaerobic digestion and combined heat and power engine are some examples of the technologies. Depending on the nature of a biomass, it can be treated with various technologies giving out some products, which can be further treated with other technologies and eventually converted into the final products as bio energy. The pathway followed by the biomass, technologies, intermediate products and bio energy in the conversion process is referred to as bio energy pathway. Identification of appropriate pathways optimizes the conversion process. Although there are various approaches to create or generate the pathways, there is still a need for a semantic approach to generate the pathways, which allow checking the consistency of the knowledge, and to share and extend the knowledge efficiently. This paper presents an ontology-based approach to automatic generation of the pathways for biomass to bio energy conversion, which exploits the definition and hierarchical structure of the biomass and technologies, their relationship and associated properties, and infers appropriate pathways. A case study has been carried out in a real-life scenario, the bio energy project for the North West of Europe (Bioen NW), which showed promising results.

Is there a role for telemedicine in adult allergy services?

Telemedicine refers to the application of telecommunication and information technology (IT) in the delivery of health and clinical care at a distance or remotely and can be broadly considered in two modalities: store-and-forward and real-time interactive services. Preliminary studies have shown promising results in radiology, dermatology, intensive care, diabetes, rheumatology and primary care. However, the evidence is limited and hampered by small sample sizes, paucity of randomised controlled studies and lack of data relating to cost-effectiveness, health related quality of life and patient and clinician satisfaction. This review appraises the evidence from studies that have employed telemedicine tools in other disciplines and makes suggestions for its potential applications in specific clinical scenarios in adult allergy services. Possible examples include: triaging patients to determine the need for allergy tests; pre-assessment for specialised treatments such as allergen immunotherapy; follow up to assess treatment response and side effects; and education in self-management plan including training updates for self-injectable adrenaline and nasal spray use. This approach might improve access for those with limited mobility or living far away from regional centres, as well as bringing convenience and cost savings for the patient and service provider. These potential benefits need to be carefully weighed against evidence of service safety and quality. Keys to success include delineation of appropriate clinical scenarios, patient selection, training, IT support and robust information governance framework. Well-designed prospective studies are needed to evaluate its role. This article is protected by copyright. All rights reserved.

Rho-kinase as a therapeutic target in vascular diseases:striking nitric oxide signaling

Rho GTPases are a globular, monomeric group of small signaling G-protein molecules. Rho-associated protein kinase/Rho-kinase (ROCK) is a downstream effector protein of the Rho GTPase. Rho-kinases are the potential therapeutic targets in the treatment of cardiovascular diseases. Here, we have primarily discussed the intriguing roles of ROCK in cardiovascular health in relation to nitric oxide signaling. Further, we highlighted the biphasic effects of Y-27632, a ROCK inhibitor under shear stress, which acts as an agonist of nitric oxide production in endothelial cells. The biphasic effects of this inhibitor raised the question of safety of the drug usage in treating cardiovascular diseases.