Large-scale complex IT systems

Society depends on complex IT systems created by integrating and orchestrating independently managed systems. The incredible increase in scale and complexity in them over the past decade means new software-engineering techniques are needed to help us cope with their inherent complexity. The key characteristic of these systems is that they are assembled from other systems that are independently controlled and managed. While there is increasing awareness in the software engineering community of related issues, the most relevant background work comes from systems engineering. The interacting algos that led to the Flash Crash represent an example of a coalition of systems, serving the purposes of their owners and cooperating only because they have to. The owners of the individual systems were competing finance companies that were often mutually hostile. Each system jealously guarded its own information and could change without consulting any other system.

Good practice guide in learning and teaching

Once again this publication is produced to celebrate and promote good teaching and learning support and to offer encouragement to those imaginative and innovative staff who continue to wish to challenge students to learn to maximum effect. It is hoped that others will pick up some good ideas from the articles contained in this volume. We have again changed our approach for this 2006/07 edition (our fourth) of the Aston Business School Good Practice Guide. As before, some contributions were selected from those identifying interesting best practice on their Annual Module reflection forms in 2005/2006. Other contributors received HELM (Research Centre in Higher Education Learning and Management) small research grants in 2005/2006. Part of the conditions were for them to write an article for this publication. We have also been less tight on the length of the articles this year. Some contributions are, therefore, on the way to being journal articles. HELM will be working with these authors to help develop these for publication. The themes covered in this year?s articles are all central to the issues faced by those providing HE teaching and learning opportunities in the 21st Century. Specifically this is providing support and feedback to students in large classes, embracing new uses of technology to encourage active learning and addressing cultural issues in a diverse student population. Michael Grojean and Yves Guillaume used Blackboard™ to give a more interactive learning experience and improve feedback to students. It would be easy for other staff to adopt this approach. Patrick Tissington and Qin Zhou (HELM small research grant holders) were keen to improve the efficiency of student support, as does Roger McDermott. Celine Chew shares her action learning project, completed as part of the Aston University PG Certificate in Teaching and Learning. Her use of Blackboard™ puts emphasis on the learner having to do something to help them meet the learning outcomes. This is what learning should be like, but many of our students seem used to a more passive learning experience, so much needs to be done on changing expectations and cultures about learning. Regina Herzfeldt also looks at cultures. She was awarded a HELM small research grant and carried out some significant new research on cultural diversity in ABS and what it means for developing teaching methods. Her results fit in with what many of us are experiencing in practice. Gina leaves us with some challenges for the future. Her paper certainly needs to be published. This volume finishes with Stuart Cooper and Matt Davies reflecting on how to keep students busy in lectures and Pavel Albores working with students on podcasting. Pavel?s work, which was the result of another HELM small research grant, will also be prepared for publication as a journal article. The students learnt more from this work that any formal lecture and Pavel will be using the approach again this year. Some staff have been awarded HELM small research grants in 2006/07 and these will be published in the next Good Practice Guide. In the second volume we mentioned the launch of the School?s Research Centre in Higher Education Learning and Management (HELM). Since then HELM has stimulated a lot of activity across the School (and University) particularly linking research and teaching. A list of the HELM seminars for 2006/2007 is listed as Appendix 1 of this publication. Further details can be obtained from Catherine Foster (c.s.foster@aston.ac.uk), who coordinates the HELM seminars. For 2006 and 2005 HELM listed, 20 refereed journal articles, 7 book chapters, 1 published conference papers, 20 conference presentations, two official reports, nine working papers and £71,535 of grant money produced in this research area across the School. I hope that this shows that reflection on learning is alive and well in ABS. We have also been working on a list of target journals to guide ABS staff who wish to publish in this area. These are included as Appendix 2 of this publication. May I thank the contributors for taking time out of their busy schedules to write the articles and to Julie Green, the Quality Manager, for putting the varying diverse approaches into a coherent and publishable form and for agreeing to fund the printing of this volume.

Direction of outward FDI of EMNEs:evidence from the Indian pharmaceutical sector

This article seeks to add to the small but growing literature of emerging-market multinational enterprises (EMNEs). Using two linked large firm-level databases, it seeks to explore the determinants of outward investment of Indian pharmaceutical companies, distinguishing between developed- versus developing-country destinations. It specifically examines the impact of two firm-level characteristics that embody “non-OLI” [ownership, location, and internalization] firm-specific capabilities of EMNEs. The finding of this study is that family firms are keen on investing in other developing countries but much less so in developed countries. However, international linkages in the form of foreign investors offset this.

Professional standards research:job satisfaction and innovation

Job satisfaction is a significant predictor of organisational innovation – especially where employees (including shop-floor workers) experience variety in their jobs and work in a single-status environment. The relationship between job satisfaction and performance has long intrigued work psychologists. The idea that "happy workers are productive workers" underpins many theories of performance, leadership, reward and job design. But contrary to popular belief, the relationship between job satisfaction and performance at individual level has been shown to be relatively weak. Research investigating the link between job satisfaction and creativity (the antecedent to innovation) shows that job dissatisfaction promotes creative outcomes. The logic is that those who are dissatisfied (and have decided to stay with the organisation) are determined to change things and have little to lose in doing so (see JM George & J Zhou, 2002). We were therefore surprised to find in the course of our own research into managerial practices and employee attitudes in manufacturing organisations that job satisfaction was a highly significant predictor of product and technological innovation. These results held even though the research was conducted longitudinally, over two years, while controlling for prior innovation. In other words, job satisfaction was a stronger predictor of innovation than any pre-existing orientation organisations had towards working innovatively. Using prior innovation as a control variable, as well as a longitudinal research design, strengthened our case against the argument that people are satisfied because they belong to a highly innovative organisation. We found that the relationship between job satisfaction and innovation was stronger still where organisations showed that they were committed to promoting job variety, especially at shop-floor level. We developed precise instruments to measure innovation, taking into account the magnitude of the innovation both in terms of the number of people involved in its implementation, and how new and different it was. Using this instrument, we are able to give each organisation in our sample a "score" from one to seven for innovation in areas ranging from administration to production technology. We found that much innovation is incremental, involving relatively minor improvements, rather than major change. To achieve sustained innovation, organisations have to draw on the skills and knowledge of employees at all levels. We also measured job satisfaction at organisational level, constructing a mean "job satisfaction" score for all organisations in our sample, and drawing only on those companies whose employees tended to respond in a similar manner to the questions they were asked. We argue that where most of the workforce experience job satisfaction, employees are more likely to collaborate, to share ideas and aim for high standards because people are keen to sustain their positive feelings. Job variety and single-status arrangements further strengthen the relationship between satisfaction and performance. This makes sense; where employees experience variety, they are exposed to new and different ideas and, provided they feel positive about their jobs, are likely to be willing to try to apply these ideas to improve their jobs. Similarly, staff working in single-status environments where hierarchical barriers are reduced are likely to feel trusted and valued by management and there is evidence (see G Jones & J George, 1998) that people work collaboratively and constructively with those they trust. Our study suggests that there is a strong business case for promoting employee job satisfaction. Managers and HR practitioners need to ensure their strategies and practices support and sustain job satisfaction among their workforces to encourage constructive, collaborative and creative working. It is more important than ever for organisations to respond rapidly to demands of the external environment. This study shows the positive association between organisational-level job satisfaction and innovation. So if a happy workforce is the key to unlocking innovation and organisations want to thrive in the global economy, it is vital that managers and HR practitioners pay close attention to employee perceptions of the work environment. In a world where the most innovative survive it could make all the difference.

Re-examining the BMW-Rover affair:a case study of corporate, strategic and government failure?

This paper analyses corporate and government strategies during the purchase, period of control and divestment by BMW of the car manufacturer Rover over the period 1994 to 2000. This paper examines three types of ‘failure’. It views BMW’s purchase of Rover as a ‘corporate failure’, with British Aerospace keen to sell Rover to raise cash and with BMW not realising the real condition of Rover. It then moves on to examine BMW’s ‘divide and rule’ strategies with regard to working conditions and subsidy-seeking and its decision to sell Rover as an example of ‘strategic failure’. Finally, it considers the ‘hands-off’ nature of British policy towards such transnational firms, and BMW in particular, as an example of ‘government failure’. This paper concludes by raising the possibility of an EU-wide policy towards transnationals, especially in terms of monitoring the activities of such firms.

Perspective work on optical fibre sensors

Optical fibre based sensors are transforming industry by permitting monitoring in hitherto inaccessible environments or measurement approaches that cannot be reproduced using conventional electronic sensors. A multitude of techniques have been developed to render the fibres sensitive to a wide range of parameters including: temperature, strain, pressure (static and dynamic), acceleration, rotation, gas type, and specific biochemical species. Constructed entirely of glass or polymer material, optical fibre devices like fibre gratings offer the properties: low loss, dielectric construction, small size, multiplexing, and so on [1-3]. In this paper, the authors will show the latest developing industrial applications, using polymer optical fibre (POF) devices, and comparing their performance with silica optical fibre devices. The authors address two pressing commercial requirements. The first concerns the monitoring of fuel level in civil aircraft. There is a strong motivation in the aerospace industry to move away from electrical sensors, especially in the fuel system. This is driven by the need to eliminate potential ignition hazards, the desire to reduce cabling weight and the need to mitigate the effects of lightning strikes in aircraft where the conventional metallic skin is increasingly being replaced by composite materials. In this case, the authors have developed pressure sensors based on a diaphragm in which a polymer fibre Bragg grating (POFBG) has been embedded [3]. These devices provide high pressure sensitivity enabling level measurement in the mm range. Also, it has developed an approach incorporating several such sensors which can compensate for temperature drifts and is insensitive to fluid density. Compared with silica fibre-based sensors, their performance is highly enhanced. Initial results have attracted the interest of Airbus from UK, who is keen to explore the potential of optical technology in commercial aircraft. The second concerns the monitoring of acoustic signals and vibration in the subsea environment, for applications in geophysical surveying and security (detection of unwanted craft or personnel). There is strong motivation to move away from electrical sensors due to the bulk of the sensor and associated cabling and the impossibility of monitoring over large distances without electrical amplification. Optical approaches like optical hydrophones [5] offer a means of overcoming these difficulties. In collaboration with Kongsberg from Norway, the authors will exploit the sensitivity improvements possible by using POF instead of silica fibre. These improvements will arise as a result of the much more compliant nature of POF compared to silica fibre (3 GPa vs 72 GPa, respectively). Essentially, and despite the strain sensitivity of silica and POFBGs being very similar, this renders the POF much more sensitive to the applied stress resulting from acoustic signals or vibration. An alternative way of viewing this is that the POF is better impedance-matched to the surrounding environment (water for the intended applications), because although its impedance is higher than that of water, it is nearly an order of magnitude smaller than that of silica. Finally, other future industrial applications will be presented and discussed, showing the vast range of the optical fiber devices in sensing applications.