Intra-industry foreign direct investment, uneven development and globalization:the legacy of Stephen Hymer

This paper revisits the issue of intra-industry foreign direct investment (FDI). This issue was considered in Stephen Hymer's early work, but was not subsequently developed, and was largely ignored in the literature for some time. Using the example of the UK, this paper traces the patterns of intra-industry FDI, both across countries and industries, for both the manufacturing and service sectors. Despite the undoubted increase in the integration of goods and factor markets since the time of Hymer's writing, the analysis presented here shows that the pattern has changed little in the last 40 years. The paper then goes on to discuss the motives for intra-industry FDI, relating it to technology flows and factor cost differentials. Finally, we present some analysis relating intra-industry FDI to uneven development, both between developed and developing countries, and between regions of a developed country. It is clear that intra-industry FDI is still very much a developed country phenomenon, as Hymer suggested, with both developing countries and poorer regions of developed countries unlikely to reap any of the benefits. In this context, one-way and two-way FDI must be seen as different phenomena within the debate on globalisation. © The Author 2005. Published by Oxford University Press on behalf of the Cambridge Political Economy Society. All rights reserved.

Missed opportunities:the WTO trade policy review for the East African community

The East African Community (EAC), comprising Kenya, Tanzania and Uganda, came into force on 7 July 2000 with a Common External Tariff (CET) established in January 2005. This Trade Policy Review (TPR) of the EAC is timely as all three countries had implemented significant trade liberalisation since the late 1980s while the CET represented an asymmetric change – Kenya and Tanzania essentially reduced tariffs whereas Uganda increased tariffs. The TPR provides considerable information on the CET and on trade and related policies in each of the member countries. However, the EAC and the TPR missed a number of opportunities: the EAC included no coordinated export promotion or investment provisions, while the TPR says little on the potential for intra-regional trade, and nor does it address the position of the EAC in the economic partnership agreements (EPAs) being negotiated with the EU. This review concentrates on these omissions to explore the implications of the EAC for developments in trade policy in the region.

Which factors drive firm survival within an industry boundary over time?:the UK onshore oil and gas production industry 1984-1999

This thesis looks at the UK onshore oil and gas production industry and follows the history of a population of firms over a fifteen-year period following the industry's renaissance. It examines the linkage between firm survival, selection pressures and adaptation responses at the firm level, especially the role of discretionary adaptation, specifically exploration and exploitation strategies.Taking a Realist approach and using quantitative and qualitative methods for triangulation on a new data base derived from archival data, as well as informant interviews, it tests seven hypotheses' about post-entry survival of firms. The quantitative findings suggest that firm survival within this industry is linked to discretionary adaptation, when measured at the firm level, and to a mixture of selection and adaptation forces when measured for each firm for each individual year. The qualitative research suggests that selection factors dominate. This difference in views is unresolved. However the small, sparse population and the nature of the oil and gas industry compared with other common research contexts such as manufacturing or service firms suggests the results be treated with caution as befits a preliminary investigation. The major findings include limited support for the theory that the external environment is the major determinant of firm survival, though environment components affect firms differentially; resolution of apparent literature differences relating to the sequencing of exploration and exploitation and potential tangible evidence of coevolution. The research also finds that, though selection may be considered important by industry players, discretionary adaptation appears to play the key role, and that the key survival drivers for thispopulation are intra-industry ties, exploitation experience and a learning/experience component. Selection has a place, however, in determining the life-cycle of the firm returning to be a key survival driver at certain ages of the firm inside the industry boundary.

International trade law, plain packaging and tobacco industry political activity:the Trans-Pacific Partnership

Tobacco companies are increasingly turning to trade and investment agreements to challenge measures aimed at reducing tobacco use. This study examines their efforts to influence the Trans-Pacific Partnership (TPP), a major trade and investment agreement which may eventually cover 40% of the world's population; focusing on how these efforts might enhance the industry's power to challenge the introduction of plain packaging. Specifically, the paper discusses the implications for public health regulation of Philip Morris International's interest in using the TPP to: shape the bureaucratic structures and decision-making processes of business regulation at the national level; introduce a higher standard of protection for trademarks than is currently provided under the Agreement on Trade Related Aspects of Intellectual Property Rights; and expand the coverage of Investor-State Dispute Settlement which empowers corporations to litigate directly against governments where they are deemed to be in breach of investment agreements. The large number of countries involved in the TPP underlines its risk to the development of tobacco regulation globally.

The 'voice' approach of trade associations:support for SMEs accessing a research institute

Access to external sources of technical knowledge is one of the keys to staying innovative for small and medium-sized enterprises (SMEs). The literature suggests that SMEs with a weak internal R&D capacity do not make much use of institutional sources like research institutes and universities. In this paper I investigate how trade associations can induce member SMEs to use a research institute. The case of a public research institute and SMEs in the textile industry in Kyoto, Japan is examined. Evidence from the case suggests that trade associations facilitate the use of the institute by expressing a collective `voice' to the management of the institute. The effect is evident among active members in the use of services involving a large information gap as to their benefits. I also consider a shortcoming of the collective approach and suggest some measures to be taken on the part of research institutes.

Market-level information and the diffusion of competing technologies:an exploratory analysis of the LAN industry

Market-level information diffused by print media may contribute to the legitimation of an emerging technology and thus influence the diffusion of competing technological standards. After analyzing more than 10,000 trade media abstracts from the Local Area Networks (LAN) industry published between 1981 and 2000, we found the presence of differential effects on the adoption of competing standards by two market-level information types: technology and product availability. The significance of these effects depends on the technology's order of entry and suggests that high-tech product managers should make strategic use of market-level information by appropriately focusing the content of their communications. © 2007 Elsevier B.V. All rights reserved.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

Organizational weaknesses of the Greek Manufacturing industry: a case study of footwear

This thesis is concerned with those factors influencing the present performance of Greek manufacturing industry and the ways in which improvements could be realized after Greece joins European Communities..Detailed examination is made of the Greek footwear industry and its problems as the country emerges from a semi developed state to a position approaching parity with Western European countries. Particular attention is paid to the technology employed, capital deployment, industrial structure and managerial performance. In order to illustrate the path of development of the Greek footwear industry a comparison is undertaken with the British footwear industry which has a longer history and has employed larger scale methods since the 19th century. This comparison illustrates the opportunities and pitfalls likely to face the Greek industry in coming years. One section of the thesis is also concerned with trading relationships between the U.K. and Greece and identifies the market opportunities available to Greek industrialists. A detailed analysis is undertaken of the available secondary sources of information particularly official statistical data relating to production, capital expenditure, imports and exports, employment and consumption. Use is also made of various surveys of trade and production in footwear undertaken by trade associations and other bodies. The field research study has been largely directed towards practicing managers in companies of various size and is concerned with exposing standards of management and of relating efficiency to organization structure. The thesis is also concerned with the many wide issues affecting the development of manufacturing industry in Greece including the influence of social structure and social institutions, the values of modern Greek society and the complex organizational problems which Greece needs to overcome in order to take its place amongst the more established states of Europe.

Approaches to issues of job regulation. A study at branch level in a white collar, public sector trade union. Available in 2 volumes.

This study examines the internal dynamics of white collar trade union branches in the public sector. The effects of a number of internal and external factors on branch patterns of action are evaluated. For the purposes of the study branch action is taken to be the approach to issues of job regulation, as expressed along the five dimensions of dependence on the outside trade union, focus in issues adopted, initiation of issues, intensity of action in issue pursuit and representativeness. The setting chosen for the study is four branches drawn from the same geographical area of the National and Local Government Officers Association. Branches were selected to give a variety in industry settings while controlling for the potentially influential variables of branch size, density of trade union membership and possession of exclusive representational rights in the employing organisation. Identical methods of data collection were used for each branch. The principal findings of the study are that the framework of national agreements and industry collective bargaining structures are strongly related to the industrial relations climate in the employing organisation and the structures of representation within the branch. Where agreements and collective bargaining structures formally restrict branch job regulation roles, there is a degree of devolution of bargaining authority from branch level negotiators to autonomous shop stewards at workplace level. In these circumstances industrial relations climate is characterised by a degree of informality in relationships between management and trade union activists. In turn, industrial relations climate and representative structures together with actor attitudes, have strong effects on all dimensions of approach to issues of job regulation.

The control of technological change in the motor industry:a case study

This thesis is based upon a case study of the introduction of automated production technologies at the Longbridge plant of British Leyland in the period 1978 to 1980.The investment in automation was part of an overall programme of modernization to manufacture the new 'Mini Metro' model. In the first Section of the thesis, the different theoretical perspectives on technological change are discussed. Particular emphasis is placed upon the social role of management as the primary controllers of technological change. Their actions are seen to be oriented towards the overall strategy of the firm, integrating the firm's competitive strategy with production methods and techniques.This analysis is grounded in an examination of British Leyland's strategies during the 1970s.. The greater part of the thesis deals with the efforts made by management to secure their strategic objectives in the process of technological change against the conflicting claims of their work-force. Examination of these efforts is linked to the development of industrial relations conflict at Longbridge and in British Leyland as a whole.Emphasis is placed upon the struggle between management in pursuit of their version of efficiency and the trade unions in defence of job controls and demarcations. The thesis concludes that the process of technological change in the motor industry is controlled by social forces,with the introduction of new technologies being closely intertwined with management!s political relations with the trade unions.

Lessons for African economies from Irish and East Asian industry policy

When comparisons in terms of industrial policy lessons to be learned have taken place, it has tended to be solely vis-a-vis the ‘development state’ East Asian experience. This paper broadens the analysis and considers lessons which African countries can learn from other so-called ‘tiger’ economies including Ireland and the East and South Asian countries. We recognise that the latter are indeed clearly significant as many African countries at the time of independence had economic structures and levels of income quite similar to East Asian countries, yet have grown at vastly different rates since then. Exploring why this has been the case can thus offer important insights into possibilities for industrial policy. Yet this comes with some health warnings over East Asian experience. We suggest that another important contribution can come by looking at the Irish example, given its emphasis on corporatism rather than simply relying on state direction in the operation of industrial policy. The Irish model is also more democratic in some senses and has protected workers’ rights during the development process in contrast to the often highly dirigisite East Asian model. Overall we suggest that some immediate actions are needed, notably with regard to the financial system in small African economies. Without such changes, a poorly functioning financial system will continue to keep investment at low levels. In relation to the small size of the African economies, the paper recommends regional integration and sufficient overseas development assistance (ODA) for infrastructural development. It is also critical to note that the various small African economies each face their own industrial and economic development challenges, and that a ‘one size fits all’ approach is not appropriate; rather the key is to tailor policies and systems to the unique opportunities and development challenges in each African country.

Exploring the impact of e-business adoption on logistics processes:empirical evidence from the food industry

The objectives of the research were to identify factors that influence e-business adoption and its impact on logistics processes in the Greek food industry. Drawing on existing research, a conceptual framework and propositions were developed and six in depth case studies were carried out. In the framework, three major categories of influencing factors were distinguished: intra-enterprise, sector and supply chain factors. Findings suggest that e-business adoption is more affected by supply chain and sector factors, rather than intra-enterprise factors. Regarding the impact of e-business on logistics process, it seems that it is affected by the frequency of its use and it is greater in processes occurring at the company-customer interface. Finally, e-business impact is more related to the dimensions of time and quality, rather than cost improvements.

Trade marks and performance in UK firms:evidence of Schumpeterian competition through innovation

This paper uses novel data on trade mark activity of UK manufacturing and service sector firms to investigate whether trade marks improve the profitability and productivity of firms. We first analyse Tobin`s q, the ratio of stock market value to book value of tangible assets. We then investigate the relationship between trade mark activity and productivity, using a value added production function. Finally we examine interactions between firms IP activity, to explore creative destruction and growth via innovation. We find trade marks are positively related to both Tobin`s q and to productivity. Also in the short run greater IP activity by other firms in the industry reduces the value added of the firm, but this same competitive pressure has later benefits via productivity growth, also reflected in higher stock market value. This describes the Schumpeterian process of competition through innovation, restraining profit margins while increasing product variety and quality.