14 resultados para International Harvester Company
em Aston University Research Archive
Resumo:
The purpose of this study is to assess the effect of relative familiarity and language accessibility on the International Accounting Standards (IASs) disclosures when IASs are first introduced in an emerging capital market. The study focuses on the annual reports of listed non-financial companies in Egypt when IASs were first introduced. The method used applies a disclosure index measurement to a sample of listed company annual reports and evaluates relative compliance with IASs in relation to corporate characteristics. The results show that for relatively less familiar requirements of IASs, the extent of compliance is related to the type of audit firm used and to the presence of a specific statement of compliance with IASs. A lower degree of compliance with less familiar IASs disclosure is observed consistently across a range of company characteristics. Consideration of agency theory and capital need theory would lead to prior expectation of a distinction in disclosure practices between different categories of companies. The results were, therefore, counterintuitive to expectations where the regulations were unfamiliar or not available in the native language, indicating that new variables have to be considered and additional theoretical explanations have to be found in future disclosure studies on emerging capital markets.
Resumo:
Impressions about product quality and reliability can depend as much on perceptions about brands and country of origin as on data regarding performance and failure. This has implications for companies in developing countries that need to compete with importers. For manufacturers in industrialised countries it has implications for the value of transferred technologies. This article considers the issue of quality and reliability when technology is transferred between countries with different levels of development. It is based on UK and Chinese company case studies and questionnaire surveys undertaken among three company groups: UK manufacturers; Chinese manufacturers; Chinese users. Results show that all three groups recognise quality and reliability as important and support the premise that foreign technology based machines made in China carry a price premium over Chinese machines based on local technology. Closer examination reveals a number of important differences concerning the perceptions and reality of quality and reliability between the groups.
Resumo:
Guest editorial: This special issue has been drawn from papers that were published as part of the Second European Conference on Management of Technology (EuroMOT) which was held at Aston Business School (Birmingham, UK) 10-12 September 2006. This was the official European conference for the International Association for Management of Technology (IAMOT); the overall theme of the conference was “Technology and global integration.” There were many high-calibre papers submitted to the conference and published in the associated proceedings (Bennett et al., 2006). The streams of interest that emerged from these submissions were the importance of: technology strategy, innovation, process technologies, managing change, national policies and systems, research and development, supply chain technology, service and operational technology, education and training, small company incubation, technology transfer, virtual operations, technology in developing countries, partnership and alliance, and financing and investment. This special issue focuses upon the streams of interest that accentuate the importance of collaboration between different organisations. Such organisations vary greatly in character; for instance, they may be large or small, publicly or privately owned, and operate in manufacturing or service sectors. Despite these varying characteristics they all have something in common; they all stress the importance of inter-organisational collaboration as a critical success factor for their organisation. In today's global economy it is essential that organisations decide what their core competencies are what those of complementing organisations are. Core competences should be developed to become a bases of differentiation, leverage and competitive advantage, whilst those that are less mature should be outsourced to other organisations that can claim to have had more recognition and success in that particular core competence (Porter, 2001). This strategic trend can be observed throughout advanced economies and is growing strongly. If a posteriori reasoning is applied here it follows that organisations could continue to become more specialised in fewer areas whilst simultaneously becoming more dependent upon other organisations for critical parts of their operations. Such actions seem to fly in the face of rational business strategy and so the question must be asked: why are organisations developing this way? The answer could lie in the recent changes in endogenous and exogenous factors of the organisation; the former emphasising resource-based issues in the short-term, and strategic positioning in the long-term whilst the later emphasises transaction costs in the short-term and acquisition of new skills and knowledge in the long-term. For a harmonious balance of these forces to prevail requires organisations to firstly declare a shared meta-strategy, then to put some cross-organisational processes into place which have their routine operations automated as far as possible. A rolling business plan would review, assess and reposition each organisation within this meta-strategy according to how well they have contributed (Binder and Clegg, 2006). The important common issue here is that an increasing number of businesses today are gaining direct benefit from increasing their levels of inter-organisational collaboration. Such collaboration has largely been possible due to recent technological advances which can make organisational structures more agile (e.g. the extended or the virtual enterprise), organisational infra-structure more connected, and the sharing of real-time information an operational reality. This special issue consists of research papers that have explored the above phenomenon in some way. For instance, the role of government intervention, the use of internet-based technologies, the role of research and development organisations, the changing relationships between start-ups and established firms, the importance of cross-company communities of practice, the practice of networking, the front-loading of large-scale projects, innovation and the probabilistic uncertainties that organisations experience are explored in these papers. The cases cited in these papers are limited as they have a Eurocentric focus. However, it is hoped that readers of this special issue will gain a valuable insight into the increasing importance of collaborative practices via these studies.
Resumo:
A key purpose of this study is to explore the lessons learned from international retail divestment and market withdrawal experiences. Drawing on 33 in-depth interviews with leading investment banks and key retail executives at Tesco, the study investigates the company's international restructuring and divestment activities in Ireland and France during the mid -1980s and 1990s. It has been demonstrated that, despite the progressive merger and acquisition wave sweeping through the corporate retail landscape recently, international retail divestment is quite widespread. The main conclusion from this study is that Tesco originally did not envisage divestment or de-internationalisation as part of the original internationalisation strategy process in either the acquisition of Three Guys in Ireland or Catteau in France. There was no appreciation from Tesco during their early period of expansion of the fact that exit pressures might arise during the course of market entry. In this regard, the case study provides insights into the relationship between investment and divestment within the context of international retail restructuring. The case evidence also demonstrates the positive impact of the Three Guys and Catteau divestments which helped management to refocus and rejuvenate the company's internationalisation process.
Resumo:
In recent years it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The research evidence on which the paper is based includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of a UK machine tool company and its Chinese partner is used to provide a specific example of the operational development of a successful collaboration. The paper concludes that a phased co-ordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work. In particular, the need to transfer marketing know-how is emphasised, having been identified as an area of weakness among technology acquirers in China.
Resumo:
This study has been conceived with the primary objective of identifying and evaluating the financial aspects of the transformation in country/company relations of the international oil industry from the traditional concessionary system to the system of governmental participation in the ownership and operation of oil concessions. The emphasis of the inquiry was placed on assembling a case study of the oil exploitation arrangements of Libya. Through a comprehensive review of the literature, the sociopolitical factors surrounding the international oil business were identified and examined in an attempt to see their influence on contractual arrangements and particularly to gauge the impact of any induced contractual changes on the revenue benefit accruing to the host country from its oil operations. Some comparative analyses were made in the study to examine the viability of the Libyan participation deals both as an investment proposal and as a system of conducting oil activities in the country. The analysis was carried out in the light of specific hypotheses to assess the relative impact of the participation scheme in comparison with the alternative concessionary model on the net revenue resulting to the government from oil operations and the relative effect on the level of research and development within the industry. A discounted cash flow analysis was conducted to measure inputs and outputs of the comparative models and judge their revenue benefits. Then an empirical analysis was carried out to detect any significant behavioural changes in the exploration and development effort associated with the different oil exploitation systems. Results of the investigation of revenues support the argument that the mere introduction of the participation system has not resulted in a significant revenue benefit to the host government. Though there has been a significant increase in government revenue, associated with the period following the emergence of the participation agreements, this increase was mainly due to socio-economic factors other than the participation scheme. At the same time the empirical results have shown an association of the participation scheme with a decline of the oil industry's research and development efforts.
Resumo:
This paper follows on from that presented at the last BEST conference in Edinburgh (Higson & Hamilton-Jones(2004)). At that stage, the authors outlined their initial research work with students studying on the yearlong International Foundation programmes. at three local FE Colleges allied to Aston University. The research (funded by the University's Teaching Quality Enhancement Funds (TQEF) involved questionnaires and interviews with staff and students (the latter all from overseas). it aimed to identify ways to improve the learning experience of students on the International Foundation programmes, to aid their smooth transition to full degree programmes in Business and Management and to improve the progression rates of such students while studying at Aston. The initial research findings were used to design a module for those students' progress to degree programmes in Aston Business School. This paper discusses how the module was designed, its content and the assessment methods used to help determine whether students are achieving the learning outcomes. The basic principle was to identify areas of study where the International Foundation Programme students needed help in order to improve their learning styles to assist them with the requirements of other modules that they would be studying during their time at Aston. Particular emphasis was put on the need to develop active learners who were not disadvantaged by their lack of awareness of UK culture and society and who were as comfortable performing written work under examination conditions or presenting orally as their UK counterparts. An additional aim was to prepare these students for the placement year which was a compulsory part of their degree. The module, therefore, comprises a range of inputs for a number of staff, a company visit, weekly reflective learning leading to Personal Development Plan (PDP) work, formal examinations, presentations, group work •and individual case studies. This paper also reports on the initial reaction of the students and tutors to the new learning experience with currently 30 participants undertaking the module. Provisional findings suggest that the International Foundation programme has prepared the students well for degree-level work and that as a group of international students they are much more analytical and, after studying the module interactive than their counterparts who have come directly onto Aston degrees. It has shown them still to be quite passive learners, comfortable with facts and lecture-style learning environments, but less comfortable when asked to use their own initiatives. Continuing progress needs to be made in terms of encouraging them to develop a reflective approach to learning with the students taking some time to feel comfortable with an analytical approach to learning. In addition, im account of the students' reactions to having to work through a formal (PDP) and the results of their first assessments will be provided. At Aston, this work is being used as a pilot to recognise good practice with regards to work with further groups of international students. it is hoped that this would have widespread application across the sector.
Resumo:
The purpose of this study is to assess the effect of relative familiarity and language accessibility on the International Accounting Standards (IASs) disclosures when IASs are first introduced in an emerging capital market. The study focuses on the annual reports of listed non-financial companies in Egypt when IASs were first introduced. The method used applies a disclosure index measurement to a sample of listed company annual reports and evaluates relative compliance with IASs in relation to corporate characteristics. The results show that for relatively less familiar requirements of IASs, the extent of compliance is related to the type of audit firm used and to the presence of a specific statement of compliance with IASs. A lower degree of compliance with less familiar IASs disclosure is observed consistently across a range of company characteristics. Consideration of agency theory and capital need theory would lead to prior expectation of a distinction in disclosure practices between different categories of companies. The results were, therefore, counterintuitive to expectations where the regulations were unfamiliar or not available in the native language, indicating that new variables have to be considered and additional theoretical explanations have to be found in future disclosure studies on emerging capital markets. © 2003 Elsevier Science Inc. All rights reserved.
Resumo:
Customer relationship management (CRM) implementation projects reflect a growing conceptual shift from the traditional engineering view of projects. Such projects are complex and risky because they call for both organisational and technological changes. This requires effective project management across various phases of the implementation process. However, few empirical researches have dealt with these project management issues. The aim of this research is to investigate how a “project team” manages CRM implementation projects successfully, across the different phases of the implementation process. We conducted an in-depth case study of the “Firm-Clients Branch” of a large telecommunications company in France. The findings show that, to manage CRM implementation projects successfully, an integrated and balanced approach is required. This involves appropriate system selection, effective process re-engineering and further development of organizational structures. We highlight the need for a “technochange approach” to achieve successful organisational transition and effective CRM implementation. The study reveals that the project team plays a central role throughout the implementation phases. Furthermore the effectiveness of technochange depends on project team performance, technology efficiency and close coordination with stakeholders.
Resumo:
Purpose: The purpose of this paper is to ascertain how today’s international marketers can perform better on the global scene by harnessing spontaneity. Design/methodology/approach: The authors draw on contingency theory to develop a model of the spontaneity – international marketing performance relationship, and identify three potential moderators, namely, strategic planning, centralization, and market dynamism. The authors test the model via structural equation modeling with survey data from 197 UK exporters. Findings: The results indicate that spontaneity is beneficial to exporters in terms of enhancing profit performance. In addition, greater centralization and strategic planning strengthen the positive effects of spontaneity. However, market dynamism mitigates the positive effect of spontaneity on export performance (when customer needs are volatile, spontaneous decisions do not function as well in terms of ensuring success). Practical implications: Learning to be spontaneous when making export decisions appears to result in favorable outcomes for the export function. To harness spontaneity, export managers should look to develop company heuristics (increase centralization and strategic planning). Finally, if operating in dynamic export market environments, the role of spontaneity is weaker, so more conventional decision-making approaches should be adopted. Originality/value: The international marketing environment typically requires decisions to be flexible and fast. In this context, spontaneity could enable accelerated and responsive decision-making, allowing international marketers to realize superior performance. Yet, there is a lack of research on decision-making spontaneity and its potential for international marketing performance enhancement.
Resumo:
Technological capability (TC) plays a strategic role in the competitive advantage of not only individual corporate entities but also entire industries. This paper investigates the crucial factors that affect technological capability development by Energy Service Companies (ESCOs) in China. It identifies how differently sized ESCOs make progress in developing TCs. Through looking at the successes achieved by developed countries in the field of energy conservation, ESCOs are able to improve energy efficiency and reduce emissions and are deemed to provide an effective means of conserving energy in China. Existing literature indicates that limited TC levels of are one of the crucial barriers facing Chinese ESCOs. Through investigating three different sizes of Chinese ESCO - small, medium-sized and large - this paper provides a framework to present the idea that Chinese ESCOs' TC development is affected by four key internal and external capabilities: management capability, investment capability, innovation capability and linkage capability. Through comparative analysis, the paper establishes that small and medium-sized private ESCOs are mainly affected by investment and linkage capabilities. Large state-owned ESCOs are mainly affected by innovation and management capability. In addition, all three types of ESCO exhibit a strong desire to develop their technological capability, but small and medium-sized ESCOs exhibit a stronger desire to conduct research and development (R&D) than large ESCOs, whilst large ESCOs prefer to increase their technical reserves through acquisition. This paper identifies factors that affect Chinese ESCOs' TC, but it does intend to address the problem of how to reduce the negative effects of limited TC or the question of how to improve the TC development of Chinese ESCOs effectively. This paper contributes to the field of TC development in the ESCO industry.