Managing innovative manufacturing

Editorial: The Managing Innovative Manufacturing (MIM) conference series started in 1993 in the UK. The first MIM conference was held at Keele University and, as from the second MIM at Leicester University in 1996, it became a biennial event with the University of Nottingham and Aston University hosting, respectively, the third and fourth conferences. The main areas of interest of the MIM conference series are: Manufacturing Strategy; Technology & Innovation Management; Human Resource Management; Organisation of Work; Product Design; Operations Planning and Control; Supply Chain Management; Performance Management. This special issue of the International Journal of Technology Management is based on selected papers from MIM2000 at Aston University, where it was organised by Aston Business School. The special theme of the Aston conference was Responsive Production and the Agile Enterprise. Altogether 82 papers were presented in parallel sessions. The eight papers included here were selected from the ‘Technology and Innovation’ stream. They have all been independently reviewed and revised before being accepted for publication. The authors of these papers are from the UK, Ireland, Turkey, the USA, the Netherlands and Hong Kong. They address a wide range of issues within the overall scope of Technology and Innovation with some papers having a geographical or sector focus and others being more general in nature. Participation in the MIM conferences has become increasingly international and to reflect this, the 2002 event is leaving the UK and being held at the University of Wisconsin-Milwaukee, in the USA. It is planned to hold the following MIM at the University of Aalborg, Denmark, in 2004.

A study of inputs and their influence on technological innovative activity

Technological innovation has been widely studied: however surprisingly little is known about the experience of managing the process. Most reports tend to be generalistic and/or prescriptive whereas it is argued that multiple sources of variation in the process limit the value of these. A description of the innovation process is given together with a presentation of what is knovrn from existing studies. Gaps identified in this area suggest that a variety of organisational influences are important and an attempt is made to identify some of these at individual, group and organisational level. A simple system model of the innovation management process is developed. Further investigation of the influence of these factors was made possible through an extended on-site case study. Methodology for this based upon participant observation coupled wth a wide and flexible range of techniques is described. Evidence is presented about many aspects of the innovation process from a number of different levels and perspectives: the attempt is to demonstrate the extent to which variation due to contingent influences takes place. It is argued that problems identified all relate to the issue of integration. This theme is also developed from an analytical viewoint and it is suggested that organisational response to increases in complexity in the external environment will be to match them with internal complexity. Differentiation of this kind will require extensive and flexible integration, especially in those inherently uncertain areas associated with innovation. Whilst traditionally a function of management, it is argued that integration needs have increased to the point where a new specialism is required. The concept of integration specialist is developed from this analysis and attempts at simple integrative change during the research are described. Finally a strategy for integration - or rather for building in integrative capability - ln the organisation studied is described.

Faces of pricing and profit planning at the doorstep of the EU: government pricing policy in the innovative pharmaceutical sector in Turkey

The majority of research on the pharmaceutical sector has focused on an overall micro economic, medical oriented welfare issues, whereas the marketing management role of the innovative drug manufacturer has to a large extent been disregarded. Using the case of Turkey, through a series of in-depth interviews with highly innovative companies, other marketing management possibilities to develop pricing strategies and plan for profit are explored based on broader definitions of value and transparency. Our results suggest that pharmaceutical companies as well as governments might have a too narrow focus of value and underestimate the potential long term benefits of a broader approach to marketing management and long term relationships between the various stakeholders.

Twelve steps to heaven:successfully managing change through developing innovative teams

In this article we propose that work teams implement many of the innovative changes required to enable organizations to respond appropriately to the external environment. We describe how, using an input?–?process?–?output model, we can identify the key elements necessary for developing team innovation. We propose that it is the implementation of ideas rather than their development that is crucial for enabling organizational change. Drawing on theory and relevant research, 12 steps to developing innovative teams are described covering key aspects of the team task, team composition, organizational context, and team processes.

Innovative measurement methodology in the study of weathering of automotive coatings

An initial aim of this project was to evaluate the conventional techniques used in the analysis of newly prepared environmentally friendly water-borne automotive coatings and compare them with solvent-borne coatings having comparable formulations. The investigation was carried out on microtuned layers as well as on complete automotive multi-layer paint systems. Methods used included the very traditional methods of gloss and hardness and the commonly used photo-oxidation index (from FTIR spectral analysis). All methods enabled the durability to weathering of the automotive coatings to be initially investigated. However, a primary aim of this work was to develop methods for analysing the early stages of chemical and property changes in both the solvent-borne and water-borne coating systems that take place during outdoor natural weathering exposures and under accelerated artificial exposures. This was achieved by using dynamic mechanical analysis (DMA), in both tension mode on the microtomed films (on all depths of the coating systems from the uppermost clear-coat right down to the electron-coat) and bending mode of the full (unmicrotomed) systems, as well as MALDI-Tof analysis on the movement of the stabilisers in the full systems. Changes in glass transition temperature and relative cross-link density were determined after weathering and these were related to changes in the chemistries of the binder systems of the coatings after weathering. Concentration profiles of the UV-stabilisers (UVA and HALS) in the coating systems were analysed as a consequence of migration in the coating systems in separate microtomed layers of the paint samples (depth profiling) after weathering and diffusion co-efficient and solubility parameters were determined for the UV stabilisers in the coating systems. The methods developed were used to determine the various physical and chemical changes that take place during weathering of the different (water-borne and solvent-borne) systems (photoxidation). The solvent-borne formulations showed less changes after weathering (both natural and accelerated) than the corresponding water-borne formulations due to the lower level of cross-links in the binders of the water-borne systems. The silver systems examined were more durable than the blue systems due to the reflecting power of the aluminium and the lower temperature of the silver coatings.

The effectiveness of an innovative intervention aimed at reducing binge drinking among young people:results from a pilot study

Aims: To assess the effectiveness of a digital-story intervention (short videos made by young people) seeking to reduce the prevalence of young people's binge drinking in Caerphilly. Method: A quasi-experimental design was adopted with three intervention sites and one control site providing the sample (mainly aged 1415 years). Three rounds of self-completion questionnaires, completed prior (T1), immediately after (T2) and 6 months after the intervention (T3). Findings: A total of 1031 questionnaires completed across the three time-points. Two-factor ANOVAs revealed a positive effect on knowledge for the intervention sample. The intervention group results showed stable attitudes towards drinking at the three time-points whilst the control group showed increasing positive attitudes towards drunkenness over the same time period. Intentions towards drunkenness were higher in the control group than the intervention group at T2 (ControlT1 Mean 3.37, T2 Mean 3.90; interventionT1 Mean 3.26, T2 Mean 3.29). Intervention participants got drunk on fewer occasions in the last week (mean occasions last week 1.57) compared to control participants (mean occasions last week 2.00), with the difference approaching statistical significance (F 1.90, p 0.07). Conclusions: Promoting negative attitudes towards drunkenness, alongside a greater sense of control and potential regret about drunkenness are likely to be important factors when considering how to change people's intentions to drink. The study shows the potential to reduce the frequency of drinking behaviour when intentions are changed, and provides recommendations for future interventions of this nature. © 2010 Informa UK Ltd.

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.

Engineering the future! Inspiring student engagement through innovative course and programme design:an empirical approach

An analysis of a bespoke learning and teaching approach developed for use in engineering education

Institutional environment, innovative entrepreneurial entry and venture capital financing

We analyse the determinants of high growth expectations entrepreneurial entry (HGE) using individual data drawn on working age population, based on the Global Entrepreneurship Monitor (GEM) surveys for the 1998-2004 period. Individual level explanatory variables are combined with country-level factors. Our results suggest that availability of venture capital and intellectual proper rights protection are strong predictors of HGE. In addition, we also find that innovative start-ups are associated with highest growth expectations in countries with extensive supply of venture capital and strongest intellectual property rights. Once we introduce venture capital, we detect no significant effects of other elements of financial systems on high-powered entry.

Reducing dependence on big brother:Higher Education looks for innovative funding opportunities

This paper presents innovative programs that business schools can utilize to reduce dependence on public funds. A review of the literature shows the theoretical and empirical foundation of higher education funding dilemmas. While higher education is moving towards a global ambition, scarcity hinders governments to fully support programs long-term; thus, cost-sharing and cost-shifting measures must occur for higher education to support current programs. In this study, we examine two universities (one U.S. and one U.K.) and provide practical summaries of programs that have provided additional funds. We show that diversity of funding sources is essential for survival of higher education institutions. Market forces require competition to reduce higher education operational costs while providing students and corporate clients an a la carte educational experience.

The relationship between transformational leadership and innovative behaviour in a healthcare context:a team learning versus a cohesion perspective

The purpose of this study was to explore whether the relationship between transformational leadership and innovative behaviour is explained via the mediating role of team learning, or whether instead team cohesion mediates this relationship. Using survey data from 158 professionals within 21 teams in the Dutch healthcare context, we tested by means of hierarchical regression analyses: (a) the relationship between transformational leadership and innovative behaviour; (b) whether team learning or cohesion mediates this relationship; and (c) the relationship between team learning and cohesion, in relation to transformational leadership. Results showed that transformational leadership is positively related to innovative behaviour and that both cohesion and team learning mediate this relationship, with team learning being the strongest mediator. Addressing a neglected area, our study provides evidence to show that managers who enhance team learning are likely to maximise employees' scope for engaging in innovative behaviours. © 2012 Inderscience Enterprises Ltd.

Developing critical understanding in HRM students:using innovative teaching methods to encourage deep approaches to study

Purpose – This paper aims to focus on developing critical understanding in human resource management (HRM) students in Aston Business School, UK. The paper reveals that innovative teaching methods encourage deep approaches to study, an indicator of students reaching their own understanding of material and ideas. This improves student employability and satisfies employer need. Design/methodology/approach – Student response to two second year business modules, matched for high student approval rating, was collected through focus group discussion. One module was taught using EBL and the story method, whilst the other used traditional teaching methods. Transcripts were analysed and compared using the structure of the ASSIST measure. Findings – Critical understanding and transformative learning can be developed through the innovative teaching methods of enquiry-based learning (EBL) and the story method. Research limitations/implications – The limitation is that this is a single case study comparing and contrasting two business modules. The implication is that the study should be replicated and developed in different learning settings, so that there are multiple data sets to confirm the research finding. Practical implications – Future curriculum development, especially in terms of HE, still needs to encourage students and lecturers to understand more about the nature of knowledge and how to learn. The application of EBL and the story method is described in a module case study – “Strategy for Future Leaders”. Originality/value – This is a systematic and comparative study to improve understanding of how students and lecturers learn and of the context in which the learning takes place.